Cutting, Creating and Masking Shapes in Lightburn!
Вставка
- Опубліковано 25 чер 2024
- ➡️ Click on ...more↙️for lots of Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - Навчання та стиль
Rich, as always incredible video. I'm excited to say that I was finally able to order my first laser engraver yesterday and all thanks to you and builddadbuild that got me excited and educated.
Great to hear Alexander! Nick is my friend! I love his crazy videos! 🤪
Thanks! Some of the best Lightburn instruction on UA-cam.
Glad you think so Brian! Thanks for the support!
Thank you for all that you do! Your videos are always so informative and helpful!
Glad you like them Cindy!
I appreciate your teaching techniques and as a newbie to lasers and lightburn these videos really help. Keep up the good work and personal touch.
Thanks Larry, will do!
You have been a blessing for learning Lightburn from a biginner of only a month. I have learned so much.
Glad to help Faron! Thanks for the support!
Learned stuff again today Rich. Thanks so much.
Awesome, thank you!
Thanks Rich, I learn something new every time I watch one of your videos.
Glad to hear that Edwin! Thanks! 👍
Thank you so much for these tutorials. I was lost when I started in lightburn and I cannot tell you how much your videos have helped.
Great to hear Tiffany; thank you!
There's so much this program will do that most of us haven't even heard of
Yep, I feel the same way! Discover something new all the time!
I have been following your UA-cam videos for sometime now and I want to thank you for your wonderful tutorials. So practical and informative. No waffling and unnecessary repeating yourself. Well done and thank you again.
You are so welcome Gilbert, thanks!
I actually figured it out thank you
Great information, you have a great ability to explain things very clearly. Thank you.
Thanks for watching!
You're an awesome instructor. I've learned alot from you...
I appreciate that!
Thank you for your expertise. You make it look so easy. Blessings to you
So nice of you!
Rich is the Bob Ross of the laser world,, easy to follow very very helpful 👍🇬🇧
That's a real honor to be compared to Bob! Thanks!
You are so helpful!!
Thanks for watching!
Great video Rich, learning new stuff daily with you thanks again..
Awesome, thank you Paul!
Great info & timely, I was trying to cut shapes 2 days ago, I was attempting to make a piece that would slide over my exhaust hose. I did get it done but I used way more steps. I now know the correct way to do it! Thanks
Thanks for the comment! I'm glad it helped!
Brilliant Demo, keep them coming, Im learning a lot from you Rich, just need to start putting more into practice
Thanks, will do Andy! 👍
Thank you for your time Rich onto the next lesson 🙏🙏😊
Awesome Ray! 👍 Thanks for watching!
Yet another great video. Keep up the great work and I love the philosophy of using requests for future videos.
Thanks! Will do Brett! 👍
great stuff. thanks
Glad you enjoyed it!
Great video Rich many thanks for all the hard work
My pleasure Peter; thanks for watching!
Another awesome video !! I have had some of the same questions, but didn't get around to checking out any videos until today. Great job Rich !!!
Glad it was helpful James! 👍
what can i say rich.... just another great video i could sit for hours watching you.. you make it fun to learn which is a rare gift in todays UA-cam thanks for taking the time to teach us all something new keep up the good work and keep them coming.
Wow, thanks! Glad you enjoy them!
Thanks Rich for yet another fantastic video
Glad you enjoyed it Daniel!
Well I’ll be dipped! I’ve wanted to do the ‘cut shapes’ task on many of my items and could never find a way to do it! Whether it was to remove portions of a certain shape, or just make a design my own, I would always go through the thought process of wishing there was a simple eraser-style button for just that, but this option makes it so much more precise! Thanks Rich!
Awesome! 👍 Thanks for watching!
@@TheLouisianaHobbyGuy Quick question on my new Longer B1 48w. It homes ridiculously slow, like glacial. Cant find for the life of me how to change that setting. I tried with Grbl settings and in Machine Settings. Where am I going wrong?
Another good demo, Lightburn should pay you as a consultant. You explain things slowly and methodically, not like some sites that wiz around saying click here, do this, do that and at a speed that leaves you just as confused as when you started. Or worse, assume that you know what they are doing even though it's supposed to be a help site. Keep being you.... 👍🇬🇧👍
Thanks Tony! Much Appreciated!
I agree, your videos rule bro
OH, OH, OH...I did it. Added text to one of my favorite images. Thank you Rich!
Awesome! 👍 Thanks for watching!
Thanks for all of your work!
Thanks so much Jurgen! And thanks for the file too! 👍
@@TheLouisianaHobbyGuy You're very welcome!
Thank you SIR
Most welcome!
Just want to thank you for the great Videos. You are a big help with me getting going with my Mira Laser. Thanks Again!!!
You are so welcome Matt!
Thanks!
Welcome! Thanks so much for the support @azbizbob 👍
Another great video Rich, I know that is going to be very useful in the future. The little blue arrow you use for pointing is much better than the circle you had before. Oh good news my new laser head arrived, will install when I get home after weekend away
Awesome Ian!
Great tips Rich. I didn't comment on the last video because I immediately started making the Mothers day gifts. I modified your files some but the turned out magnificent. 😁 Thanks for the video!
That is awesome George! Join the forum and share a picture! lahobbyguy.com/bb/
That’s cute symbols :)
Thanks!
Many thanks Rich every day a school day 🤣
Awesome! 👍 Thanks for watching!
Really useful video Rich love the channel and the forum
Glad to hear it!
Rich, bedankt voor mooie les!!! Geweldig!!!👍
Heel erg bedankt voor het kijken naar Yelena!
@@TheLouisianaHobbyGuy 🍀🐞🍀🐞🍀
Now I know the easiest way, thanks to you Sir
My pleasure Art!
More good information. Thanks.
Glad it was helpful Merrill!
another fantastic video... as soon as my laser arrives i'll be signing up to be a patreon... i didn't know what it was until this video- thank you
Thanks! And welcome aboard!
Thanks
Welcome! Thanks for the support! 👍
Another great video
Thanks again!
I agree with Alexander.
Another great video. My biggest complaint is I can’t remember all these lessons you’re doing for us. I hate getting old.
Don't feel bad John! I too sometimes have to go back and watch some of my older videos to do a job! 🤪
Thank you Rich. Always informative and helpful. Minimum power setting is one I never have understood or know how to set. Possible addition to a video like this one? Thanks. Mike
I talk about it from time to time Mike. Min power is what Lightburn uses to make turns so the corners don't burn.
great video and you take the time to explain as well . I have the latest light burn and followed your instructions! and looked at other videos , yours being better explained . yet for the love of me. I cannot get masking to engage . on tools either, not highlighted and won't no matter what I do ??? any thought obi one
It's always the order of selection that's the problem Pat.
Thank you
👍 Thanks for watching!
In the offset tool, you can select "Delete original object", and it will delete the inside lines automatically.
Yes you can! Good tip, thanks!
You are a great teacher! Very enthousiastic about Lightburn. It would be nice if you tell about your experiences regarding the strange behaviour of the software. For instance you choose a layer with a line graphic and want to cut out some lines. It works with a square, ellips, and rectangle and polygon as selection tool but it is impossible to use the "line"-tool te sketch a cut-out selection. I prefer to use adobe photoshop to do the graphics; way simpler in my opinion.
Strange behaviors? Once you learn it, there are none. If you use the pencil tool you just have to close the shape. It's a matter of learning the software. Photoshop is far more complicated IMO.
Rich, I think it is a great idea, ie. use database to log all requests and teach the top 3 or so per video.
Great suggestion Gerard!
As always, I learned some new tricks to using Lightburm and thank you so much! I do have a question that your demonstration of masking btought up. Is there a way to bring objects forward or send to back? In other programs (like Silhouette Studio) I can click on an object, such as the heart, and have it in front of the photo which makes it easier to align. I’ve searched for this tool but never found it.
Sort of Marcie. The 2 tool paths are for that for the primitive shapes, like circles and squares. They will be on top of a photo, while any other layer will be under it. In Lightburn, you can only work with 2 items at a time. And I'm guessing you're talking about photos. With more than 2 photos, the newest one you import will always be on top.
great work! Thanks :) On another note, what are the award certificates on the wall behind you? Quite a bit of them.
Thank you! They're my BS & Master of Computer Science, Fireman 1 cert from LSU, NREMT (Prior volunteer, first responder, ACLS with the FD) and a few more odds and ends on a wall out of frame.
Danke!
Thanks for the support Matthias!
When cutting shapes you said you put the cutter on a 'tool path', what does that mean. When I try to cut shapes it deletes the active line on both sides of the cutter and leaves the cutter so I'm clearly missing something.
Your videos are great. Thank you
T1 and T2 on the color pallet on the bottom of your screen are tool paths.
Hi Rich. Another great lesson and tips. You should create courses with the certification and collect some $$ 😃
Thanks Bob! Great idea!
A lot to learn as in all your videos, thank you
An out of context question, how to add the autofocus command in the Move tab?. I saw it in another video of yours
The auto focus command is automatically on the Move tab if you have a Co2. For a diode, you add it on the Console tab by right clicking on a Macro, and then in the contents, you type, [ESP500]
@@TheLouisianaHobbyGuy Thanks a lot
Thanks, Rich as always great stuff. Have you ever thought about doing a live stream?
Yes Michael, I'm getting setup for it now.
@@TheLouisianaHobbyGuy Thanks Rich I am looking forward to seeing that.
thank nice video
Thank you Jacques!
Dear Mr Louisiana, how do I replace right top corner of a rectangle with a shape (like flower but og extending the right hand border. Love your videos! From South Africa
Place the other shape over the corner, select both, and click the weld shapes icon Louise!
@@TheLouisianaHobbyGuyHere os what I want to do: I want to cut my business card rectangle and the right top corner must be shaped like the petals of a flower withou going over the border on the right. Can it be done Rich?
I am new to Lightburn. I have watched a few of your videos and found them very helpful. I was wondering if there was a way I could Watch the videos in a particular order that would make it easier to understand light burn from the beginning. Thank you
There are playlists on the main channel page.
@@TheLouisianaHobbyGuy thank you so much!
Greetings dear rico!
I'm subscribed to your channel and I really appreciate your good tutorials.
If you haven't already, I would like to suggest you to make a tutorial teaching how to print images and/or photos on wood. Thanks
Thanks Daniel! Appreciate the suggestion!
Awesome Video! 1 question however, on the text part with the photo underneath , after engraving, is there a way to then cut out the text?
Sure, just add a cut layer. And in the new version of Lightburn, in the cut editor, you can just add a new tab now James.
@@TheLouisianaHobbyGuy and it will will the mask edges?
@@CrymSyN007 I just launched a new video on the editor James.
Hi, Rich another great video, and would you know if an Ortur Laser can cut clear acrylic out.
No Malcolm. The Ortur is a diode laser with a 455nm beam, it passes right through clear acrylic. You need a 10,600 nm invisible beam to cut clear items, such as the Co2 laser.
@@TheLouisianaHobbyGuy I have seen a video of cutting clear acrylic that is covered on one side with some kind of brown paper that peels off would this work.
@@VintageForYou Nope
@@TheLouisianaHobbyGuy Thanks for your help Rich I found some info from another UA-camr and you are right it will not cut clear acrylic but will cut colored acrylic.
Very informative video. I did have one question. At about the 3 min mark when you are putting the oval on top of the picture, you said "put it on a tool path." What do you mean by that?
On the color palette at the bottom of the window, You'll see T1 & T2. Those are tool paths used for designing. They have no output to the laser Maggie.
@@TheLouisianaHobbyGuy Got it. Thank you for responding. I have really learned a lot from you.
Can you pass a long piece of wood under a laser cutter? I have a 430x430mm Atezr P20 wanting to cut out a "name sign" I understand I can do one letter at a time and maybe dowel them together, but is there a way to pass it through?
Yes Kayla, the Lightburn channel has a great video on print & cut: ua-cam.com/video/n__saOKVupA/v-deo.html
Ok I found mask in light burn menu but it’s grayed out and a few other options
You have to follow the order of operations.
Would lightburn be easier to use if I get an external mouse for my laptop. Everything is so sensitive I just can't do what I want. Not really wanting a desktop.
Absolutely Kerry! I never use the mousepad!
Hi Rich any way of creating 3d text something like a beveled look thank you ;)
You can imitate 3D text by using layers in the graphic at different power levels.
What if the apply mask to image isn't an available option? I can't seem to get the the mask option at all. Is there a particular format the pictures need to be in?
No Chuck, but there is an order of operations. If you follow along with the video it will work for you.
Hey My name is Mrs G, I just recently subscribed to your UA-cam, you are awesome 👏 I would like to know if the Ortur cutter can cut 3/16 Eucaboard? I’m interested in buying one of the Ortur machines and I have a unique shaped heart and a few other things that I would like the machine to cut out is that possible?
Welcome Mrs G, and thanks for the sub! Ortur only makes 5.5W lasers, so I think you might be disappointed by it. Eucaboard is Masonite, or a hardboard. Most diode lasers will have a lot of trouble cutting it. The best option is a Co2 laser for this type of job.
@@TheLouisianaHobbyGuy Thanks so much for getting back to me so quickly I truly appreciate it😀😀😀
did the run time say 3hrs?
I really don't know, this was a software demonstration.
Okay, I am working on the broken heart. I made the broken heart with the pencil, all one line. Perfect. BUT, I can't make the selection work to actually split the heart, been trying for an hour?
I can't explain it in a comment, but I did do it in the video. Try and re-watch it and follow along.
I did it? And, I waited a couple of days to make sure I could do it again. Actually, so easy, thanks to your video!
@@TheLouisianaHobbyGuy
Hi. How did you make the shape of the #2 design on your Mom-Day library?
It's hand drawn in Lightburn with the pencil tool Robert.
@@TheLouisianaHobbyGuy thanks. I need to practice with the pencil tool
Is it possible to mask a vector image?
Sure, why not? Draw your shape, arrange it over the vector where you want it, and click Tools --> Cut Shape.
So I took an image, made a shape inside it and cut it. It puts the cut out shape on a tool path. Now I'm unable to select the image to adjust it. What am I doing wrong?
If you follow the steps in order in the video it works. Order of priority matters.
Once I engrave an image on some wood how do I cut the thing out? I asked this question on your forum,but no help there. Is there a video that shows the cut window I can't find in Lightburn.
There were lots of replies to your topic. You simply create another layer and set it to LINE in the Cut Settings with the appropriate speed and power. I think you need to watch a lot more videos before you embark on a project to get a better grasp on how to use the laser.
@@TheLouisianaHobbyGuy Yes I need more instruction. Thought I had it figured out , however it appears I have no idea what it's all about. Thanks for your input.
Just keep watching videos for now. You'll have an epiphany and some point and it'll all start to fit!
Rich, I am so discouraged when I design a simple project in lightburn, when I run the job it comes out 2x larger than the designed image. Please help……
Try posting on my free forums. lahobbyguy.com/bb. I can't diagnose a problem here in a text.
Hey boss, I just had someone reach out to me to train them on light burn. What do you think would be a good rate? They are 45 minutes from my location out in MN here.
I used to get $475 for a half day (4 hours) in my shop.
I could probably train them live over the computer but I also think being in person would be the most efficient training. $80 an hour?
@@TheLouisianaHobbyGuy Thank you sir! So about $60 an hour. Intuitively I could see about a half day getting someone on track with the basics.
I wouldn't do it for less than $100...
I know this is a older video, but I am beating myself crazy trying this MASKING thing. Trying to put a jpeg photo on a white tile of my deceased Mother in law for her daughters. I have sized toe photo, drawn a square same size as the tile (6" x 6"), and aligned the photo to fit horizontally. The photo is taller than the tile so I want to mas off the remainder. MASK is always grayed out no matter what I do...HELP PLEASE!!! Using Lightburn, D1 Pro 40 watt, jpeg photo...
The mask layer has to be below the image layer on the cuts and layers tab.
OKay, I am doing something stupid. I draw a rectangular shape upper left hand corner of my photo. I select the shape and go to menu Tools/Cut Shape. Nothing happens. I play around with ungrouping and using either Shift or CTRL keys, occasionally getting it to work. I can then insert date into photo.
I really don't know what you're trying to do.
Thanks to your video I now know how to cut a shape from a photo and replace with text (picture of you and your wife) using the Add Tabs. I really have to organize my tutorials!
My texts keeps burning backwards how do I flip it around I can use horizontal to make it backwards on lightburn then it will print the right way
Your origin is set wrong Elijah in the Device Settings.
Where do I switch it around at in device settings
Where it says Origin in the top left.
Mask isn’t showing up when I right click where is it in the menu?
If you don't follow the order of operations exactly it won't show up.
@@TheLouisianaHobbyGuy I had to turn it convert to bitmap got it working!
Please remind me of which site it is to donate where they don’t take a percentage please
paypal.me/lahobbyguy - Thanks so much for the support @karenamurray1962
Got that now thanks
Thanks so much for the support Karen!
Thank you 💖
Great video and info, but you didn't quite go where I want, in your picture of you& wife, how could you remove all the background and just have your picture?? in fact I have a broken heart that is on a background and I want to remove the background so I can brung them together to cut and engrave.
You probably skipped over it.
I was hoping this video would help me but if it does I don't understand. I have an order for 3 powder coated tumblers for 3 retired marines. So I bought the best patterns on ETSY I could find, but the background is white or clear and to burn the logos correctly I need a black background and it should work. I am sure the Marines do not want a black headed eagle . LOL I love your channel by the way, Please keep putting them out.
Brad X- Navy Diver
Etsy isn't going to be a good place to get laser files. Most of them will require lots of tweaking and redesign to get them to work. Retired Marine? Okay, email me the file and I'll see if I can fix it for you Brad.
thelahobbyguy@gmail.com
Thanks!
No problem! Thanks for the support!
Thanks
Welcome! Thanks so much for the support!
I am a total stranger in the world of all things laser. To the point where someone might wonder what on earth I bought one for in the first place, (but we can all dream, right?)
However, just watching a few of your informative and ‘soothing’ tutorials on UA-cam, I am at last beginning to feel that I might actually be able to ‘make this work’ so I am grateful to you for both your benevolence with your expertise, and also the straightforward and calming way in which you deliver it.
Thank you.
Wow! Thank you so much! 👍
Thanks!
Welcome! Thanks so much for the support @walonguy111
Your welcome, your videos are so helpful, glad to contribute.
Thanks!
Thank you Eddie! I appreciate the support!
Thanks!
You bet! Thanks so much for the support!
Thanks!
No problem!
Thanks!
Thank you for the support Claudia!!
Thanks!
Thanks so much for the support Jane! 👍
Thanks!
Thanks so much for the support Moondog!
Thanks!
Thank you so much for the support! I really appreciate it!
Thanks!
You bet Dan! Thanks so much for the support!
Thanks!
You bet! Thanks so much for the support!
Thanks!
Thank you for the support! 👍