Dude! Buy the cheapest electric jigsaw and screw it to the tray. You won't find a better virator, that's 100%! And I encourage others to do the same! And the drill will become unusable very quickly, since the bearings are not designed for vibration loads.
Sure, jigsaws are more adept at taking vibrations and constant work loads, but they gyrate way too fast. The slowest setting would shake that wood sifter frame into pieces within a few minutes, and sand would be flying everywhere.
Cool stuff, I fear that this method will likely not last long though. I would instead suggest the tumble method, take the screen and make a cylinder with an axel at the center. Have that rotate and put the whole thing at a slight angle.
yeah, it's going to shake itself apart in no time.... and really it should be much bigger to be worth the time and effort to make it in the first place. Nice concept though.
Very cool. They use a really stout version of a machine like this in oil and gas. It's called a shale skaker. It separates aggregates from drilling fluid.
The screens can be damaged over time by the aggregate in the sand. You should modify the design to provide for removable screens so they can be replaced periodically.
@@No_soup_for_you ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
Оптимально и проверено на действующем грохоте - подвеска сит на полосках резины к раме, на грохоте установлен эксцентрик, привод которого осуществляется через отрезок жесткого РВД от асинхронного двигателя. Никаких шарниров, всего пара подшипников на валу эксцентрика. Отсеивал так грунт для аквариумов на 3 фракции - 3-5мм, 6-8мм и 9-12мм, песок и гравий крупнее шли в отсев.
Forget sand ima use this to sift all the hickory nuts/shells/hulls out of my compost and use them in my pathways since they are inoculated from being in my compost pile for about a year
I wondered the same, but there must be a reason. Maybe the soil is depleted and unusable for farming. Maybe to make gravel for one project and sand for another. Also, I have a huge sandbox for the kids, and that needs to be sifted occasionally, so this would work great for that! I do like the other comments saying to make a cylinder or to use a jigsaw instead. All nifty ideas for separating! I just hope people don't separate fertile soil if they can help it! With the world population increasing, soil is becoming more valuable.
Dude! Buy the cheapest electric jigsaw and screw it to the tray. You won't find a better virator, that's 100%! And I encourage others to do the same! And the drill will become unusable very quickly, since the bearings are not designed for vibration loads.
Sure, jigsaws are more adept at taking vibrations and constant work loads, but they gyrate way too fast. The slowest setting would shake that wood sifter frame into pieces within a few minutes, and sand would be flying everywhere.
Jigsaw speed an be variable
Use a Sawzall instead.
Cool stuff, I fear that this method will likely not last long though.
I would instead suggest the tumble method, take the screen and make a cylinder with an axel at the center.
Have that rotate and put the whole thing at a slight angle.
yeah, it's going to shake itself apart in no time.... and really it should be much bigger to be worth the time and effort to make it in the first place. Nice concept though.
Very cool. They use a really stout version of a machine like this in oil and gas. It's called a shale skaker. It separates aggregates from drilling fluid.
Очень полезная вещь🖒 Благодарю!
So beautiful dear friend 🤩
The screens can be damaged over time by the aggregate in the sand. You should modify the design to provide for removable screens so they can be replaced periodically.
+1
Don’t worry about that. It’ll fall apart long before the screen wears out.
@@No_soup_for_you ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Dude, you didn't watch the video closely. His screen is attached by a pair of screws only. He can replace it in a snap.
@@1islam1 Allah can shove it!
Ficou topdlinha, com certeza vo fazer uma 👏👏👍👍
Next level.......always great designs..
I bet an old washing machine or dryer motor would work good on that too.
Thank you for watching!
I'll try that
Опоры для решетки можно и лучше сделать из полосок фанеры 8-10мм. Тогда не нужны никакие петли и шарниры, фанера будет пружинить как рессора.
Оптимально и проверено на действующем грохоте - подвеска сит на полосках резины к раме, на грохоте установлен эксцентрик, привод которого осуществляется через отрезок жесткого РВД от асинхронного двигателя. Никаких шарниров, всего пара подшипников на валу эксцентрика.
Отсеивал так грунт для аквариумов на 3 фракции - 3-5мм, 6-8мм и 9-12мм, песок и гравий крупнее шли в отсев.
10:28 Get that watch off while doing wood working.
You can put it back on when rewiring the house.
There are so many weak points it makes no sense even to criticize this. Good job anywyay!
Really appreciate the video. 😊
You are a genius. You save me
Forget sand ima use this to sift all the hickory nuts/shells/hulls out of my compost and use them in my pathways since they are inoculated from being in my compost pile for about a year
It's the idea 💡💡💡so everyone could modify to private works and specific need, it's true there are some weakness but have solutions...I guess
Класс!
عمل جميل ورائع جدا
Идея правильная, только дрель поломается быстро.
Brillant
Makita drill with a Hitachi battery? 👀
I would like to know how long this lasts before it self destruct with all those vibrations ☺️
O cara é engenheiro
Сама идея хорошая. Но надо делать из металла. На 5 минут хватит
Потом рассыпится
bro, can i get all of the dimensions every piece that you used? that would be a great help for my project. thank you for your response!
Now if only he can make a wooden nail clipper😂
which problem did you face in this Machine
When in operation it shakes quite strongly..I think it needs a stronger frame system and fixed to the ground.
Thanks!
That's nice and all, but why would you want to do this with your soil?
I wondered the same, but there must be a reason. Maybe the soil is depleted and unusable for farming. Maybe to make gravel for one project and sand for another. Also, I have a huge sandbox for the kids, and that needs to be sifted occasionally, so this would work great for that! I do like the other comments saying to make a cylinder or to use a jigsaw instead. All nifty ideas for separating! I just hope people don't separate fertile soil if they can help it! With the world population increasing, soil is becoming more valuable.
in many countries people buidl houses with bricks, sand and cement. ussualy the sand need to be clean from small stone for plastering the wall
What's the drill pieces u used to work the shaker
Столько всего сделал, а про лопату руки не доходят.
Excelente
Merci
Mesh barrel with a motor seems easier
cool
❤❤❤
Мне кажется,что эта конструкция не на долго..😢
Es vacan pero pequeñito con vibradora
Please give me the possibe cost and possible number of materials needed
That poor electric drill needs to be replaced with a cheap motor.
Inclination of seive should be less
Could you please let me know the Machine bolt sizes and Ball Bearing internal(same as machine Bolt size ) and outer diameter.
Você cobra quanto pra fazer uma pra mim
Работает тихо.
Do you have any dimensions for this?
So sorry! It was just an impromptu project of mine. It was not planned in advance.
Thanks for watching!
Производительность адовая
Nicht nachmachen! Ein bohrschrauber ist für dauerbetrieb nicht ausgelegt. Brandgefahr!
that's like worse than chinese quality, the lever that passes rotational motion to the box will unglue from the box the next day
I saw this over a year ago in portuguese.... it's a shame you have to act like this is your idea. The original guy was brilliant, you not so much.
link