Hello sir. Thanks for the detailed xplanation. What color coding will i follow, if i were to use a cat5/cat6 network cable to connect the telephone directly to the PABx?
This might come too late but I will put it out here anyway, You need a router that supports VoIP, You slot the sim into the router then run an rj11 cable from the router to one of the CO line port. Note: The router doesn't necessarily has to have internet. It will work regardless.
Good explanation...anyone can understand the configuration from your explanation. Welldone. Subscribed. Can you talk about the co lines and it's applications. Thank you
Hello my friend i cant call out on some lines and i cant receive on some lines. mine is still the older version you have with you there what should i do . can i reset it ..thanks
The pabx with me was bad, but it was fixed after it was fixed it went to 801 instead of601, and the first two extensions are not working, pls what could be the problem?
Please your audio went out when you're doing the configuration and that made me not to understand.. The configuration, afternoon dialing**10 1234 and the system is configured,will other telephones be configured accordingly by the ports?
Yes sir, you only have to do the configuration on the first port, when you hear the welcome message all other port are automatically configured according to the number written on them i.e 02 port becomes 802, 03 port becomes 803 and so on
It's basic plug and play, just connect phone to port 01, then dial the code in my video to unlock the admin, after entering the code you will get a welcome voice note, you connect phone the the other port and call out
This PABX is basic Plug and play, don't really need resetting and each port is preconfigured, powering the PABX off and on again will reset it to default
Hello sir.
Thanks for the detailed xplanation.
What color coding will i follow, if i were to use a cat5/cat6 network cable to connect the telephone directly to the PABx?
Just use of any color of your choice for example blue/bluewhite
Thank you for your explanation. Well done sir
You welcome
Please can you talk more about how to configure the CO lines. What will be connected to the CO ports for users to call external numbers
This might come too late but I will put it out here anyway, You need a router that supports VoIP, You slot the sim into the router then run an rj11 cable from the router to one of the CO line port. Note: The router doesn't necessarily has to have internet. It will work regardless.
The process is complicated and I will have to do a video on it
Thank you but Does this method of configuration work for all PABX?
This is for this particular brand, other brand like Panasonic, miracell have slightly different configurations
Thanks for the video , please it’s it possible to loop two pabx to achieve 60 channels
Yes, if they are panasonic pabx
Good explanation...anyone can understand the configuration from your explanation. Welldone. Subscribed.
Can you talk about the co lines and it's applications. Thank you
Thanks, what do you want to know about it
Please how do I connect 2 ike pabx on different network segments?
that will depend on the model you are working with, if the model you have doesn't have the facility then it won't be possible to do that
Please how can I connect two Ike pabx together
I need to know the models you are working with, but you can't connect the lower models
If was not setup for first use can it still work
It's more likely not work, setup it up for first use please.
Good day please how can I connect four pbx together to act has one ,bcose each building has is pbx and what all to be work has one
What type of pabx are you using? what is the brand and model?
Please I want to change from 801 to 101. Ike PABX model TC:3000k/432p
Did you get a reply on this please let me know
Any reply yet??
Not possible on this particular model, but there are IKE models which support this function
Not possible with this model, you can get the model that supports this function
There are other models which supports this function
Hello good morning please my question is how to extensions the system from 33 port to 66 port ?
Yea it's possible if the model of PABX has that function
Thanks but how can i set factory default?
This is a simple plug and play device, restating it returns is to default except you meant something else, if you can go into details.
Hello my friend i cant call out on some lines and i cant receive on some lines. mine is still the older version you have with you there what should i do . can i reset it ..thanks
If it has been reset before and it has worked fine in the past, then you need to open the pabx and service it
The pabx with me was bad, but it was fixed after it was fixed it went to 801 instead of601, and the first two extensions are not working, pls what could be the problem?
If it's this particular model, then the IC cheap that controls the numbering has been replaced with another one,
How to set custom extension instead of 801,802 ,803 etc...
It's not possible on this model
You need to buy the IKE model that has that functionality
After configuring the first pot does this automatically make all the admin line active?
Yes, all other lines can be called from the first number I.e 801
Please your audio went out when you're doing the configuration and that made me not to understand.. The configuration, afternoon dialing**10 1234 and the system is configured,will other telephones be configured accordingly by the ports?
Yes sir, you only have to do the configuration on the first port, when you hear the welcome message all other port are automatically configured according to the number written on them i.e 02 port becomes 802, 03 port becomes 803 and so on
Please can you show me how to program PABX model 2000b series
What is the brand and model?
Please I'm still trying to configure the numbers to my choice but it isn't working.??
Which model of PABX are you working with
How to configure IKE 48pot
It's basic plug and play, just connect phone to port 01, then dial the code in my video to unlock the admin, after entering the code you will get a welcome voice note, you connect phone the the other port and call out
Good day
Pls hw can i program my ike according to d room number pls
Yes tha is possible, however not all IKE PABX is programmable, ensure your model of IKE PABX is among the model that is programmable.
Please is possible to loop for pbx to work has one
It's depends on the model you are working on
How do I go back to default, 01 and 02 are not working
Repeat the configuration again
Please I didn't get how to connect the second phone.. the second phone is not connecting
You need to dial admin code first to activate it
Pls wia r u from
Lagos
How could I reset my IKE PABX 24 ports
This PABX is basic Plug and play, don't really need resetting and each port is preconfigured, powering the PABX off and on again will reset it to default
I forgot my password how to restore factory settings
You don't need a password on it, the device doesn't lock
*6000#
Hello boss
Hello, you welcome
your contact?
09030587868, it's on the video also
Ur number pls😅 13:55
My details is on the video