This is quickly becoming my favorite UA-cam channel love how you guys work and interact with each other cracks me up the whole time. And the video has great editing skills
That Camaro ZL1 sounds so crazy and made really good power. So AngryEric is caused by Steve being there. Maybe we should have Tyler film HappyGoLuckyEric interactions on builds. It would make for better content. Good videos guys. Thanks for taking up the helm Tyler while Steve was gone.
The RPM and CSP seemed like cool guys on the Motorama videos I watched where they bantered back and forth. I say the loser of the races (call-outs) has to wear each other’s Merch on Camera for the day.
Cant wait for race season, Fran make sure you fit in Mikes car, we are going to want to see what a full pass looks like..He's gonna pucker! Awesome video as usual, Tyler did a great job filling in!
Mike won't even show up. He always finds a reason to miss a race because his ego can't stand the hit of losing. He's all show and no go. Just ask his ex-girlfriends.
pistoncount they are the same brand that InShane Designs put on the widebody C7. I know both this channel and Shane's channel mentioned the brand in past videos.
Extremely impressed with the ZL1, its begging for a Procharger setup OMG... The Zed6 really has great numbers for the stock displacement its making good tq and power. E should wake it right up
Kc M two step limits engine rpm at a certain point and holds it there for launching purposes in drag racing. It’s typically tied into a push button momentary switch and often tied into a trans brake on an automatic car. Hold the switch down (two step on) and hold wide open throttle. Once you release it the two step de-activates (allowing full rpm) and car goes balls to the wall. It also is sometimes used in the burnout box to prevent over-rev. (Sometimes people add a third slightly higher rpm step for that).
Twisted T he's already got a decent drag radial on it, but yeah if he gets serious about drag racing the car a 15" conversion and a nice set of welds would help.
Favorite part of that video is Fran’s head sticking out above the windshield of 717’s Z. Lol. At 6’4 245 I feel your pain, buddy. The c7’s just don’t work.
A two step allows for you to set a certain rpm electronically so you can floor the gas and it will stay at that rpm until you let the button go. Like a launch control. It’s like an electric transbrake in a way. A transbrake is much better for drag racing but you cant get one for a 8L90 trans.
Peter Carey A two step retards timing, you will here it sound like its backfiring and running like shit (but it sounds great) then boom, your gone. The factory LC is more of torque management by limiting RPM’s after you launch kind of.
Can someone explain how that car pops so damn much 😍. It's the only exhaust I've ever heard do it... But one exhaust can't seriously cause that much popping .. it's intoxicating
"Stay tuned for E". I was assuming that means you were going to show the hp-numbers on E85-feul right? Pretty curious now. Feel free to correct me though Awesome video's, lot of fun to watch!
So, i have an honest question, what is the point of two-stepping a car that is not turbo'd? According to my understanding two-step retards firing so that combustion is happening close to or just in the turbo to build boost faster, so what is the use of it in a supercharged car?
They are fairly effective, but I think for his case it has more to do with not getting thrown out at the track as they require you to have some sort of roll bar when you go faster than a 10.9. Most modern cars are safer structurally then cars were when those rules were originated, but unfortunately they haven't been updated or changed.
With stock tire size and rear gear, if he started in 1st gear maybe a 20 roll....that would put him running 20-103(top of third gear) in about 5 seconds. With launch, slicks, and air resistance.... high 8's??!! 8.92
This is quickly becoming my favorite UA-cam channel love how you guys work and interact with each other cracks me up the whole time. And the video has great editing skills
Hearing that g8 hit the dyno after Mike's car really puts it into perspective how much HP he's got... and the ZL1 as well.
With rpm videos, I know I’m gonna like it before I start it. That’s the best complement I can give for a UA-cam channel.
Best damn sounding ZL1 I've heard!
can't get over how sick that ZL1 looks with those wheels.
I5ZQ8 do you know what brand they are. And the size of tire on the rear
jesse garcia Ferrara wheels
I have to say you guys have some of the coolest intro music on UA-cam
This channel is the truth
John Doe not like cnn 😂
In love with that ZL1
I can't wait to see the Street Speed 717 RPM Vette kill the competition !!!
The ZL1, is so nice i could listen to that car all day long.
Love that ZL1 !!!!! Want one in the worst way. Can yoi please break down all the specs on it ?
You all do fast work.. Nice to Mike give the Z06 what it needed
great videos , i still wait like a little kid for each episode .
Still love the wheels on the ZL1.
Been waiting all morning for this.
That Camaro ZL1 sounds so crazy and made really good power. So AngryEric is caused by Steve being there. Maybe we should have Tyler film HappyGoLuckyEric interactions on builds. It would make for better content. Good videos guys. Thanks for taking up the helm Tyler while Steve was gone.
You know how hard it is to get through the week without my normal video content 😁. Welcome back!
That ZL1 is mint! 😎
Dopest vlog in the game
The Black ZL1 with the Gold wheels on it looks freaking BAD ASS!! Any idea what wheels they are?
The RPM and CSP seemed like cool guys on the Motorama videos I watched where they bantered back and forth. I say the loser of the races (call-outs) has to wear each other’s Merch on Camera for the day.
I second that
Better get the rpm merch ready.
for a whole month
CSP is no where near the level of RPM
I learn so much from your videos. Thanks for uploading.
Linkin Park in the background at around 20:00. Epic shop. ✊🏼
Procharger FTW!
Cant wait for race season, Fran make sure you fit in Mikes car, we are going to want to see what a full pass looks like..He's gonna pucker! Awesome video as usual, Tyler did a great job filling in!
Mike won't even show up. He always finds a reason to miss a race because his ego can't stand the hit of losing. He's all show and no go. Just ask his ex-girlfriends.
Kevin Parker lol you must be stupid XD
Between this channel, StreetDrive420, and a few others, I struggle to run out of content.
The Poor Gamer there could never be too much cars and horsepower
vincent p True that.
Mike’s Z was rippin’!
Good job Tyler
that 2-step its nasty
That dude looks hilarious while on the dyno....head sticking outta the roof pretty much
I wish the 6.4L Hemi engine would pick up similar gains on hp/tq from headers and head/cam upgrades like the Chevy blocks do...
WOW that vette sound beastly on the dyno cant wait to see what it does on track
That ZL1 looks and sounds great.
Zl1 was pretty impressive for just a cam
Tyler did a great job
Awesome vid.
I like Tyler doing the videos! Everyone seems to be more cool : )
icurt06 better than no cage🧐
Fran looks like he’s playing Mario cart in mikes c7
there you go for all the people saying mike didn't show the chart
AMARAT101 I'm not sure what I was looking for? I saw one line over 900? Is that what the car is making now?
CrazyNikel people were trying to say it didn't make what he said it made because he didn't post the graph.
CrazyNikel think like 920 on pump gas will be well over thousand on e85
Matt Specht 914
That ZL1 is beautiful 😍
What are those wheels
Also curious, I know I've seen them before
pistoncount they are the same brand that InShane Designs put on the widebody C7. I know both this channel and Shane's channel mentioned the brand in past videos.
Pennywise Thanks! Ferrada FR8 is the wheel!
blknblubkrdude no problem.
ZL1 is a beast looks like my kid will not be going to college!
You guys like popcorn? That ZL1 likes popcorn..
Mike's car sounds like a fucking animal.....and over 900 at the wheels?? If I had that car for more than 15 minutes I'd either be dead or in jail.
Definitely do the GoPro on the dog
So Damn Clean !!!!
Mikes outfits always look ridiculous 😂
Like if you were here before streetspeed shouted out RPM
I wanna see more "trans tuning" pulls man!! that's the shit...love the vids keep them coming
Extremely impressed with the ZL1, its begging for a Procharger setup OMG... The Zed6 really has great numbers for the stock displacement its making good tq and power. E should wake it right up
Can you guys do a vid or give a little insight on what a two step is and how it works?
Kc M two step limits engine rpm at a certain point and holds it there for launching purposes in drag racing. It’s typically tied into a push button momentary switch and often tied into a trans brake on an automatic car. Hold the switch down (two step on) and hold wide open throttle. Once you release it the two step de-activates (allowing full rpm) and car goes balls to the wall.
It also is sometimes used in the burnout box to prevent over-rev. (Sometimes people add a third slightly higher rpm step for that).
@twistedwedge12 Thank you sir
I see you StreetSpeed 717 😎
That trans tuning part was bada##. For the C7 Z06
them wot shifts are like butta
Mikes gonna have to get some more drag specific tires and wheels for that bad boy
Twisted T he's already got a decent drag radial on it, but yeah if he gets serious about drag racing the car a 15" conversion and a nice set of welds would help.
Horse power horse power and more horse power!!!
Love the videos keep it up
That’s a long flat torque curve on the 717 Z06!!
Had to take the top off of Mike's car so Fran could fit his melon head :o)
I love it very good guys rpm best keep up and love video and c7
I love Mike's car but damn that zl1 sounds so good 😍
Roughly how much does your shop currently charge for a cam and pulley swap package on a ZL1 like that, installed & tuned?
Send us and email. Sales@raceprovenmotorsports.net
Favorite part of that video is Fran’s head sticking out above the windshield of 717’s Z. Lol.
At 6’4 245 I feel your pain, buddy. The c7’s just don’t work.
The race seats he had in there sucked so i was basically sitting on top of them.
I’ve always wondered how Cleetus has done it
Dylan Rietcheck Cleetus has a custom seat that’s smaller & sits lower so it give him a few inches to sit more comfortable
When are you guys gonna do the E85 tune can't wait to see those numbers #RPMforthwin
Nice!!
MAKE THICC FRAN A THING PLEEAAASEE!! 😂😂
Now that is a roll cage I would get so that I can easily remove part of it to get into the car. :)
Would you explain exactly what a two-step is/does and pro/cons of such a setup?
Peter Carey I would like to know also.
A two step allows for you to set a certain rpm electronically so you can floor the gas and it will stay at that rpm until you let the button go. Like a launch control. It’s like an electric transbrake in a way. A transbrake is much better for drag racing but you cant get one for a 8L90 trans.
Chuck Beef. Thanks. I thought Mike's ZO6 already has launch control from the factory.
Peter Carey A two step retards timing, you will here it sound like its backfiring and running like shit (but it sounds great) then boom, your gone. The factory LC is more of torque management by limiting RPM’s after you launch kind of.
Can we twin turbo mikes corvette instead.
christian Lemonade that’d be lame wtf
Julio Granados kinda like you right?
christian Lemonade that’s the most homosexual comeback I’ve ever heard 😂
Julio Granados the first comment you said was the dumbest shit I’ve heard from a person.
christian Lemonade tHe FirSt CoMmEnT yOu SaId wAs ThE DuMbEsT sHiT IvE HeArD fRoM A pErSoN
Can someone explain how that car pops so damn much 😍. It's the only exhaust I've ever heard do it... But one exhaust can't seriously cause that much popping .. it's intoxicating
Fran what tire shine y’all use on mikes car shit they were shining
These new zl1s 😍
Notification squad !
Those E numbers are going to be crazy! Was he doing nitrous with this build?
No mike is not doing Nitrous
jr9307 I bet he's gunna make around 1100 on E probably 900 tq
"Stay tuned for E". I was assuming that means you were going to show the hp-numbers on E85-feul right? Pretty curious now. Feel free to correct me though Awesome video's, lot of fun to watch!
Michiel OSH yep E85
vincent p Thank you. He must have forgotten.
Tyler is a cerebral assassin
Va car on the dyno !! Hell ya
Fran - when is the first race for you this year, April?
I’m not sure yet. Depends what series I run
RaceProvenMotorsports , Cool, RDRA - Limited Drag Radial FTW!
What kind of wheels does the ZL1 have??
So whens the next dyno day? Sitting here patiently waiting for the announcement :)
That ZL1 is strong for being basic bolt Ons!
Why does RPM no longer work on LS1/2/6 engines? Any particular reason?
We never said we don't do LS2s and we will do select stuff with LS1/6 cars, we just like to focus on the newer stuff 05+
@RaceProvenMotorsports what are those wheels on the zl1??????
follow the dog for a day bet it funnier then hell
so do you guys ever work on corvettes
Rarely
Mike and Steve sound almost identical lol when I first started watching these vids this I thought it was mike Haha
Just NASTY!!! HEY RPM is this the the way to go seems like alot of ppl are putting prochargers on there cars?
Depends on goals but it’s a very nice option
RaceProvenMotorsports Ok and thats tru. Thanks for the reply are yall out of N. Carolina
Delaware
RaceProvenMotorsports Ok awesome im way off 😂😂
That 2 step tho
So, i have an honest question, what is the point of two-stepping a car that is not turbo'd?
According to my understanding two-step retards firing so that combustion is happening close to or just in the turbo to build boost faster, so what is the use of it in a supercharged car?
Came for the car. Stayed for the dog.
What brand are those rims on the camaro ?
Love the c7 z
Yes, moar Zeus
When is Mike bringing her back to finish the mod's and tune?
Mods are all done... all that's left is E85 tune.
IT'S WEDNSDAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Boosted GTO my dudes. AAAAAAAAAAAA
Dyno top fuel dragster
I like racecars.
Not me, ugly AF
I like turtles.
I love, lamp.
Why only 66 tq gain on the Z06 with all that stuff added on? I assumed at least 150 ft lbs.
ZL1 sounds naaaaazty!
How effective can a bolt in roll cage with removable bars really be??
They are fairly effective, but I think for his case it has more to do with not getting thrown out at the track as they require you to have some sort of roll bar when you go faster than a 10.9. Most modern cars are safer structurally then cars were when those rules were originated, but unfortunately they haven't been updated or changed.
That #GMLife tho!! Mmmhmmmm!
With stock tire size and rear gear, if he started in 1st gear maybe a 20 roll....that would put him running 20-103(top of third gear) in about 5 seconds. With launch, slicks, and air resistance.... high 8's??!! 8.92