Great video, i managed to rebuild a f80 RL with that video. Thanks you saved me a lot of money. To all the haters down in the comment section: there's no comment on the video needed all you need is to observe the service once otherwise there's something wrong with you.
Thank you it helped me a lot, to service my fork fox F90 RL, I didn't figure out how to put out from the body of the fork the damper. Keep up the good work!
So, the damper service is essentially just replacing some O-rings? Also, what type of grease were you using to lubricate the Damper Cartridge prior to the reinsertion into the fork legs? How about a video for Air Spring maintenance? Very good video for showing the steps involved! Probably the best one I've seen on YT. Thank you for sharing this!
When should you perform damper service on your fork? I have a 32mm 2011 fox float 100RL. I'm about to replace the seal, so I thought while I was at it I would clean the uppers/lowers, put in new oil, and regrease the bushings. Should I go ahead and perform the damper service?
Great video, I got a rebound knob stuck after removing and installing the damper. Didn't take damper apart yet, just did a cleaning and oil change. What could be possible route cause ?
Hello thanks for the video, a question. How much oil and what type is inside the locking mechanism? It would be great if you put descriptions and quantities to your video Thanks
Hey there, could you put a link of the Service Kit in here? I want to ride my brothers old Mountain Bike, which hasnt been moved for the last 3 years. The damper is a fox 32 f100 and looses some oil on the tubes after sagging in. Thanks :)
Buenas bro, en la página de Fox, dice que lleva aceite de 7w. Yo tengo la misma horquilla y dentro de poco le haré mantenimiento, pero yo voy a utilizar aceite de 5w para que sea mejor la sensibilidad. Ahí estás tú cuál prefieres ponerle. Saludos
![Fox F80 - F100 RL / RLC O/B Federgabelservice [HD]](http://i.ytimg.com/vi/WQnYS8vmyfk/mqdefault.jpg)
Great video, i managed to rebuild a f80 RL with that video. Thanks you saved me a lot of money. To all the haters down in the comment section: there's no comment on the video needed all you need is to observe the service once otherwise there's something wrong with you.
I hit the mute button and it was smooth sailing from there!
Thank you it helped me a lot, to service my fork fox F90 RL, I didn't figure out how to put out from the body of the fork the damper. Keep up the good work!
just did mine following your action. thx a lot. just got to see on riding now!
thanks for the detailed commentary on what you're doing and why you need to do it!! great!! top work!!
Μπράβο μάστορα. Χειρούργος!!!
Шикарно! Я к вам готов из Москвы приехать для этой процедуры. У меня такая-же вилка - Fox 32 F100 RL 2009 Black (OEM).
this video would be way for helpful with out the 1980s porn music
I think it's called a volume button.
How much oil did you re-fill on the damper side - how did you measure it out?
So, the damper service is essentially just replacing some O-rings?
Also, what type of grease were you using to lubricate the Damper Cartridge prior to the reinsertion into the fork legs?
How about a video for Air Spring maintenance?
Very good video for showing the steps involved! Probably the best one I've seen on YT. Thank you for sharing this!
When should you perform damper service on your fork? I have a 32mm 2011 fox float 100RL. I'm about to replace the seal, so I thought while I was at it I would clean the uppers/lowers, put in new oil, and regrease the bushings. Should I go ahead and perform the damper service?
Great visual representation, but a little narration would go a long way.
Great video, I got a rebound knob stuck after removing and installing the damper. Didn't take damper apart yet, just did a cleaning and oil change.
What could be possible route cause ?
What kind of grease for screws have you used?
Hello thanks for the video, a question. How much oil and what type is inside the locking mechanism? It would be great if you put descriptions and quantities to your video
Thanks
Great this video Liolios-bikes
Please please post a more detailed video!!! I'm begging you!!
MUITO BOM IRMAO VALEW FICA COM DEUS
It is open bath.
Damper cartridge servicing - Fox F100RL fork
Damper cartridge servicing Fox F100RL fork
how much for a full service of a f series 32 100mm?
Great !! I have a question... Where did you find the service kit...? Thank you !
Нужно провести ТО такой же вилки)) В какой европейский город подъехать? ))
You dont necessarily have to service the damper, unless the oil comes out very dirty (it was not changed as needed), or you have a damping problem..
my damper is not working how will i fix it
And how much oil is in the tube? Thnks
buonasera è possibile sapere il quantitativo di olio che serve in una forcella FOX32 nella cartuccia idraulica (forcella del 2013) grazie fabio
Hey there,
could you put a link of the Service Kit in here?
I want to ride my brothers old Mountain Bike, which hasnt been moved for the last 3 years. The damper is a fox 32 f100 and looses some oil on the tubes after sagging in.
Thanks :)
any fox 32 mm rebuild kit, go on amazon
Tengo una horquilla igual y le quería hacer mantenimiento. Pero en mi ciudad no existe aceite fox. Que densidad de aceite utilizas????
Buenas bro, en la página de Fox, dice que lleva aceite de 7w. Yo tengo la misma horquilla y dentro de poco le haré mantenimiento, pero yo voy a utilizar aceite de 5w para que sea mejor la sensibilidad. Ahí estás tú cuál prefieres ponerle. Saludos
Helpful for Bike
Cuánto aceite lleva el dampet?
Change the heading to damper service!
Uh. What oil did you put in there ? And how much of it ?
oil chart .. depending on the fork really...
Fox float de 140 de 32 me podrías decir la cantidad de aceite que lleva en cada lado de las barras gracias un saludo
qual a quantidade de oleo na fox f100 rl???obrigado
What is the service kit world number for this fork???
I spin my rebound knob but it's soft and doesn't do anything. could it mean i have no fluid or broken seals?
bought a used gary fisher for cheap and has good parts for my marlin 6.
@@borderex9993 Did you figure it out? I've got a 2011 F29 on a trek that I have to service
@@imafeltersnatch7634 no, i'm just riding like that
Is this a oben bath Fork or the FIT cartridge?
I wonder that question too!!??
Le faltó mas...como..q cantidad de aceite
Henry pika depende del modelo de horquilla
Ok bien. ..
en el canal de Mundo Mammooth, busca en youtube, enseñan como
Nice video but its so sad becsuse you dont say nothing about what kind of oíl and grease you are using .
Take the music off and explain what you're doing and why !.
nice visuals, terrible music.
Words instead of music would be helpful.
Que musica horrivel nao consigo prestar atencao.