2.1 Soundbar System With Sub | DIY Speaker Build
Вставка
- Опубліковано 27 вер 2024
- 👉2.1 Soundbar Build Plans - bit.ly/Soundbar...
👉Speaker Build Kits - bit.ly/KMAspeak...
👉Build Speakers - salvageaudio.com/
🔊2.1 SOUNDBAR COMPONENTS
Speakers - bit.ly/2Tymphan...
Tweeters - bit.ly/2NoaV4G
Crossover - bit.ly/Soundbar...
Port Tube - bit.ly/1x4PortTube
Plate Amp - bit.ly/2S4qhNI
Subwoofer - bit.ly/2Ak1sH7
Sub Spikes - bit.ly/2CRngwd
Foam - bit.ly/Foam5
Soldering Iron - bit.ly/SolderIronS
Glue Gun - amzn.to/2dCjf2K
🔗LINKS
Free DIY Speaker Build Plans - goo.gl/9sCDdG
KMA T-Shirt - goo.gl/cc5lx9
KMA Website - kirbymeetsaudio...
Support On Patreon - goo.gl/cc5lx9
My Speakers - bit.ly/SAspeakers
📲FOLLOW
Instagram - / kirbymeetsau. .
Facebook - / kirbymeetsaudio
🎵MUSIC
Music Made By Me!
⚙️ALL YOU NEED TO GET STARTED
Drill - amzn.to/2641yxs
Circular Saw - amzn.to/23iuCfx
Speed Square - amzn.to/23ivhgQ
🛠️TOOLS
Router - amzn.to/23isnJh
Router Table - amzn.to/28NaaHE
Router Adj. - amzn.to/1UUvwuY
Chamfer Bit - amzn.to/1UUvV0w
Mortise Bit - amzn.to/1ZYQ3An
Table Saw - amzn.to/28NdP8o
Miter Saw - amzn.to/1ZYQfQ9
Cordless Drill - amzn.to/2641DRD
Orbital Sander - amzn.to/1UUyU9n
Finishing Sander - amzn.to/1ZYSjrk
🛠️MORE TOOLS
Bar Clamps - amzn.to/28Neoz0
Soldering Iron - amzn.to/28NedUs
3” Forstner Bit - amzn.to/1ZYS8fz
Forstner Bit Set - amzn.to/1Upcayn
Measuring Tape - amzn.to/1UUxpb4
Push Stick Pack - amzn.to/1XwjV8U
Auto Center Punch - amzn.to/2643yG3
Digital Angle Gauge - amzn.to/28Nc0Zb
Combination Square - amzn.to/1XwkhN3
🎥CAMERA GEAR
Camera - amzn.to/1W5Pci8
Wide Lens - amzn.to/28NeQ0j
50mm Lens - amzn.to/1W5PR35
Microphone - amzn.to/1ZYU9II
Big Tripod - amzn.to/1ZYUv23
Flexible Tripod - amzn.to/1UUAwzX
🤙If you have any questions, comment!
I invite you to be a part of this awesome community.
Thank you so much for watching!
-Kirby
4 years ago I watched this video and it inspired me to mess around with wood, I now own my own woodworking business and left a career banking job. Thanks for sharing your work.
I have to say watching your build videos is a zen moment for me.
I love that! It's pretty zen for me too. Thanks for watching, Jason!
Two quick question
I would love to make this project, but, the easiest way to integrate it into my very simple setup is with an optical audio cable. Do you have any recommendations on what parts I should get to add an optical audio port? I think this is something I am going to look into.
Also have you played with torching the front panel of wood to make the grain stand out more?
You can get one of those cheap chineese 5.1 decoders and modify them, they can decode an digital spdif signal (a.k.a signal from an optical audio cable) and output 5.1 channels. With some work you can make the 5.1 output to an 2.1 ;)
Thanks MrApplecraft, I found this on Amazon, but I need a way of integrating it with the back of the speaker.
amazon.ca
Digital to analog converter would be the easiest way to hook it up.
This is what happens when Kirby meets audio.
And it’s the best feeling ever when its set up in the place
Great build.
From an old school. I love the original design. That is the way my brain work. take something and make it your own. WOW!!
That was 17 mins and 15 seconds of pure relaxation......... What a way to chill out.
Amazing workmanship too :-) keep up the great work
I love the way he make the videos.. its all about speakers but its kinda rellaxing tho ☺️
I agree on that!
Thank you!
Can't wait to see the channel get big
Me too! Though, 12,000 is HUGE for me.
Молодец, безусловно лайк за золотые руки)))
It's great his channel is tiny but technical
you sir, are definitely beyond human.
hands down.
I get the asmr with the miter saw, I will try with some speakers I have lying around. Thanks for the inspiration, build plans and great video. I swear two works of art every video
Thanks, Nel!
Gorgeous photography.... aweaome projects. 👍
Thanks, Leonardo!
Awesome. You are a true artist. And what a photography!!!
Thanks, Gustavo!
Your Video Editing Was Spot On.Your Works Building That Speaker Absolutely Great.Perfectly Nice,Well Done.
Thanks so much!
I could look and listen to this video...for an indefinite amount of time.
as always very enjoyable video! as a little suggestion, I don't recommend mounting drivers to the back of the board as it gives the sound room to reflect.
That's one heck of nice home wood shop you got there!
Thank you, Nathaniel!
Yes the music sounds very interesting good theme for the video!👍👍
I like it when you clean the wood with your bare hands :)
Thanks for watching!
these videos are so well shot i can spend the whole day just watching them to relax
Just got goosebumps, hypnotized and captivated for 17min. Awesome video and awesome work, thanks for sharing!!!
Красавчик!!! Шикарно!!
I just loved the woodwork. But the song you chose was so loooong and depressing :O.
Someday I'll depress the WHOLE WORLD! MUAHAHAHA!
Oh noes! Haha. Keep up the awesome work!
Man Everytime iwatch your videos bro..... Nuff respect
You're lucky you've got the tools and knowledge to construct such good speakers! keep that way, I wish you all the best!!! greatings from Serbia!
I can't even tell you how much you inspire me!
this music really is some kind of a trip...
Thanks!
Hi, song name pls? and what is your source for the music in your videos?
Kirby Meets Audio Please Kirby, what is this neat and delightful music? Production on your own?
Shazam has just identify that it contains a sample from "Plan And Act by Patrice Nko'o"…
@@guillaUXm this is the music but i pretty sure this is a remake by kirby
they use it as sample to and not notice it is bad kirby...
What a lovely speaker! More knowledge for my brain and to do for my soul big big thanks from Argentina.
billy bad ass.... inspiring. ...
even if I never made a set of speakers.
I would still enjoy your videos
nice background for delay+guitar improvisation 😎
You like to live dangerously. No riving knife
Wey.... que hermoso trabajo!!!
Me encanto .... no me perderé tus vídeos ya que me inspiran a buscar inspiración y crear mis propias cosas, ya tienes un fan en México!!!
saludos!!!
Beautiful work
he mirado con admiración tu trabajo eres genial eres un bendito en tu arte dios te bendiga
Muchas gracias! Agradezco que ver y por su apoyo.
Man, your videos are so much inspiring and your HQ materials and machines are making your product the best! I hope to see how you are building wood speaker horn.
Thank you!
I love your work.
I always wait for your videos and share it with everyone who are interested in woodworking.. I wish I could arrange all the tools you have.. but you give me a best inspiration to setup a workshop... thanks a lot for the videos..
cheers..!! happy building
Thank you so much, Parth! That is a huge help. Keep at it and you'll get there one day. Thanks again!
you are a genius man
These are always great. It's like an episode of How It's Made, but with no voiceovers.
Thank you, James! I love that show! Loved? Is it still on? I guess I'm not that big of a fan.
You're very welcome. I honestly have no idea either. Haven't had cable for a long time.
nice job ... and good music too.
is a therapy to me, see you working
Thanks, Alex!
Impresionante trabajo hermano. Hecho con pasión y dedicación.
sos un capo,genio me encantan tus trabajos ,me gusta todo lo que se refiera al audio.
¡Gracias por ver!
wow excelente trabajo, con esas herramientas si que provoca trabajar.
Pretty snazzy looking! Well done! But that knot drives my OCD crazy!
SAME!!!
Muahahaha!
the knot's knot bad in my opinion!
I'm really addicted to these videos... And I don't know why...
I love all your videos. I find myself in a limbo between in utter zen and peace of mind, or raging jealousy of your job and your life (of what I can see) :)
I am 15 and looking at different options for what I want to do after education, working with such beautiful tools and materials plus getting such an amazing product at the end of it really appeals to me.
If you get a moment it would be very helpful to me if you could explain how you got to where you are now, and benefits / cons to what you do (I am presuming you do it as a bill payer and not just a hobby)
Any information would be greatly appreciated.
Good luck.
First vid i've seen of you... that is the most confident subscription i think i've ever made. you are truly one of the best
Thank you so much!
Me gusta la música que le pones a tus vídeos :)
Hands down, the most beautiful thing I've ever seen!
Las cosas bien echas ,bien parecen .Saludos
Damn this is some interesting, entertaining and actually relaxing stuff to watch. Good work making this kind of video a quality content.
this look incredible
I swear.... This is just cool!
гениальная работа!!!
very enjoyable to watch
What you do and how you present it, is almost spiritual! You deserve way more subs :)
Thank you!
You are a professional!! excellent work!
Awsome build! Dat 50mm bokeh tho.
Great job. I liked your job. Fantastic. Congrats
awesome work bro..
u might have added some rock wool or glass wool sheets inside the subwoofer cabin..
it will help u to get more good clean bass response by cutting down the higher freq reflections..also u might hve used a good passive network instead of a capacitor ....
An inductor coil network can enhance ur subwoofer also it can filter the higher frequencies entering to the woofer.
nice build..really fantastic👍👍👍
very unique damn good build man its very unique
Love the video style and editing. Very inspiring .
Nice creation& good workmanship👌👌👌👌👌👌👌
Kirby, you are great!
You the best 100%👍👍👍👍🏆🏆🏆
Nowadays Soundbar and sub-woofers are connected wireless via thru Bluetooth. Can u through some light on this. (such as LG model no : NB3540)
You should treat yourself to a routerand circle jig. It'll revolutionalise your builds. Proper circles and flush hmount drivers look so much nicer and make tweters sound better.
I have and use both! Great tools.
Fantastic craftsmanship... but I've been always wondering, when watching your videos, if there is some proper acoustics engineering involved in your projects?
I'm an electrical engineering student and was wondering the same thing. I've built a few simple speakers with copper wire and a magnet; granted they sounded like crap but it worked.
Absolutely! But I don't solely focus on getting the best sound possible. I try to find a balance between form and function, using acoustical engineering when needed but still allowing for the project to look good. Theres a lot more forgiveness to speaker design than people think. Thanks for watching!
Justin Rush when you build speaker cabinets, best to use MDF wood and use a online software to measure the size of your cabinet and spacing of speakers based on the type of speaker drivers you using, to give best acoustic sound.
you can use a thing layer of pine wood for finishing over the top of the MDF wood for the wood grain look., then use electronic crossover if you can afford it, that's what what high end speaker companies do.
never use pine for the entire build as pine gives un-natural resonance and inaccurate acoustic bass sound stage. MDF wood is always best used for speaker cabinets.
I've built many speaker cabinets and every driver is different, so online measure based on driver used is best, as some drivers may be need to be ported and others not.
this guy just design a cabinet based on wrong materials no measure based on the drivers for accurate acoustic sound either.
It's going to sound like a small alarm clock radio with lots of distortion and lack of bass.
Wayne Gale, would you recommend some specific software?
Daniel Venturi WinIsd
How about a video comparing the same driver in three boxes: too small, just right and too big; something like a test? Would it yield some interesting results? Love your videos!
That's a great idea! Thank you!
This video was utterly satisfying! Good Job
High quality good job
amazoing work and great video shots man
Thank you!
That is an absolute masterpiece!
Dang, you're so kind! Thanks for watching!
Great Video!
Nice one.. But it would be great if we were able to hear the sound quality from it!!! 😀
But the quality would only be as good as his mic picking it up and your own speakers or headphones reproducing that captured sound.
Yes but u can hear distortion, high and low levels if you have semi-decent headphones\speakers, which most people these days have, so hearing it is kind of essential. Without hearing the sound its pointless to even start on a project such as this. Love the vids anyway.
No sound test = blue balls
@@fetymann if you're here it's cause you probably like audio. if you like audio, then you probably have decent headphones, and this guy has a good microphone. it's not the same as hearing it in person, but it's quite better than nothing...
this was so well put together! great job man.
Thanks so much, Kym!
Dude, I just saw four different hands! Are you a magic carpenter from the planet of yug thiw norpa?
amazing work.
awesome videos. thanks for the video tutorial
You make some beautiful speakers Kirby! Also your build plans are the best I've EVER seen.
Shame i cant give two thumbs up, really great video and great music and great project.... Really REALLY great production quality too :D
amazing vídeo.. please send one of this amazing speakers for my home in Brazil 😀 kk (Sorry about my english)
He’s not giving them away for free
Não passa vergonha no crédito não, passa no débito que é mais chique.
This is the first video of yours I have ever watched, and have just watched it now for the first time. Immediately following the video, I hit "Subscribe"; it was that good. (And I only subscribe to
beautiful i'm speachless.
Hello. Your work looks amazing. Couple questions. How does it cost as diy and what about sound quality?
you are really a artist, the speaker the kind of videomaking, its art. great. i like it
Very nice job👈👍
Nice job!
muy bonito el diseño te felicito .
Good video....great job.
nice build!
Great work
SII...INTERESANTE. LIMA-PERU.
Subscribed! Actually a relaxing, enjoyable, and educational experience.
Perfect. Please test sound
I. would suggest a high quality plywood (baltic birch 9ply or 13 ply) to reduce resonances in the cabinet. For the sub - a high density particle board with outside plywood with internal bracing.
this is so satisfying to watch. really cool
Thank you, Daniel!