Factory in Video: Jung Won Iron Casting Corp. 영상 속 업체: (주) 정원주철 Home Page: www.jwcast.com Phone: +82-31-998-5271~4 Fax: +82-31-998-5275 E-Mail: jw4240@ hanmail.net
Thank you for the video! Also ua-cam.com/video/vwV-Im_xlic/v-deo.html can be useful for you if you are looking for a cloud solution to store and share OEM drawings, 3d models catalogs
Outstanding Video- Great photography and editing. The Craftsman shown are extremely talented and take pride in their work. Thanks for sharing this! Subscribed...
Dyan ako nanggaling ganyan din ginagawa ko noon that was 1994 up to 1996 2years ako dyan, tanong ko lang kung dyan pa si Mr sung kapatid ng may ari ng kompanya
2:55 If you look closely in the right corner, you can see a path made of Styrofoam for molten metal. And the reason they dipped the mold in cement holds the shape when the molten metal flows. thank you for watching! 😀
The process is basically lost foam investment casting. The form is made from foam, and gets vaporized by the molten metal. The form is coated in ceramic (the investment), and the ceramic is then what becomes the actual walls of the mold. The form is loaded into the sand to support the ceramic and slow cooling. The sand is only a support and insulation, this is why it is not packed around the form like they did with the covers.
@@joshua43214 Thanks for the explanation, i was wandering the same. I know that smaller cast iron items like fittings for plumbing and brake discs are made in automated process, DISA machines comes to my mind, is that not possible with something like this?
All that damn work to prep a mold to cast. Then the process of setting up the cast is more important than the pour or debur. Next time you see a manhole cover think of the hard work these people put in that create them. Think if the Pakistani had this machinery! They are floor casting using their feet to pack in the black sand around the mould.
It's the only format where the lid can't fall through the seat, it can happen if they were square or rectangular and you try to close the lid oriented diagonally.
Литьё по газифицируемым моделям. В баках создаётся разрежение вакуумным насосом, в зону где находятся рабочие практически ничего не попадает. Мы также люки для Мосводоканала изготавливаем :)
@@jday3965 При выплавке метала, там столько всего в воздухе, что выгоревший пенопласт просто теряется на общем фоне. При запуске дуговой печи весь цех заполнен дымом в котором и сульфаты, и нитраты, и микрочастицы металлов. Там где пенопласт, хоть вытяжка есть нормальная.
И газ. Очень энергоёмкое производство. Корейцы, однако, молодцы. Не имея особых природных ресурсов и не лучшие земли для земледелия очень достойно живут. Работают, правда, очень много.
Nah, the guys in Pakistan wear sandals not boots, do not wear safety glasses, throw hot metal around and don't use benches. But they still get the job done.
Some English speaking country is receiving these manholes. The high GDP rate in Asian countries (GDP = production, what the nation produces and how quickly) is why are they not made where they are going? How did iron forging migrate from the US to Korea or from England to Thailand? Will America ever perform higher than 2% GDP? Such a low GDP the nation cannot pay its debt and with such a wide gap in income, workers will never earn more than the current price of labor, and all of or most of the 2% GDP is bought by extremely rich people. This is a wake up call for American labor. In this episode of history, my hunch is that workers unionizing will only bring about Capital Flight. Unionization would have prevented capital flight but now I think it will be harmful to workers and not the answer to companies so big they can open shop in Asia. Big companies will have to be forced to stay and invest. France was wise, they made it a law their corporations cannot leave France without real reasons approved the government. Netherlands, similar. Germany the workers are part owners of production, in America the workers are totally unattached to production. Americans call this ‘freedom’. A costly price for freedom when you look at the condition of the working class in the US. Fully loaded in debt and cashless. Worse is the inflation that Biden does nothing about. Nixon at least froze prices and wages to curb inflation. This time around the politicians do not even bat an eye at the eroding effects of inflation on worker’s earnings. They raised interests rates, thinking this will discourage employers from raising prices and it will, slow and long over a period of time, not before a lot of people are damaged from inflation. Will Korea face the same decline of industrialization seen in America and England with their low GDP rate (2%) and when wages rise high enough the companies pack up their gear and split? Seems inevitable economic decline is what happens when production is divided between two economic interests, worker and their employers. There is a struggle and one of them is left holding the bag.
@Jk Ok, ready for your lesson that you missed. Did you ever see a graph with a line that travels from zero and rises to higher number over a period of years? That is called a chart. Wages is represented by the line in the graph, the line extends over 20 years when wages were low in Asia to where they are now higher than 20 years ago. You get the point now? Just as wages rose high in the US, wages will rise generally in Asia. When they cut into profits the companies you work for will leave just as they did in the US. Textile industries go first, left the US in 1980 with the passage of NAFTA. You don’t know what I am talking about because you are not trained in the life cycle of modern industry, i.e., the business cycle.
@@jamescollier3 Healthcare in the US is a thing you can buy. But only the healthcare provider (corporation) can buy and sell healthcare. They buy it cheap and sell it dear to each other. Their job is to make their healthcare insurance profitable to be sold or attractive enough for another buyer of their healthcare insurance program that the hospitals are connected with in the network system they designed for themselves. The end user of health care is forbidden by law to buy or sell their healthcare. Doesn’t sound like a free market system to me. Sounds like the way a street drug cartel operates guarding their turf. Another thing, it is illegal to develop a vaccine to treat a disease in the US as long as a treatment for that disease exists even if that treatment is not 100% good. The providers have laws that will enable them to take your vaccine development and market it for themselves and have you locked up in jail. What a sick system, eh? In the end healthcare is a thing you can buy where the rich live and poor die in America and the hospital system rates as a death sentence.
@@MrDXRamirez NAFTA came into effect in 1994 during the Clinton Regime. Carter was president in 1980, despite his (many) faults, he never would have given us NAFTA.
Только в Корее рабочий доживет до старости, а в Пакистане помрет в глубокой старости от кучи болезней - лет в 35))) И цены там всего раза в два отличаться будут, а качество намного хуже как и повторяемость. ЗЫ: в Пакистане про выплавляемые модели слышали наверное только в сказках)))
@@vasiliiv9532 ну и что? Это же капитализм. Одни страны живут за счет других. Убирают у себя вредны производства в страны третьего типа мира. Борются за зеленую энергетику, а производят агрегаты для нее опять же в странах третьего мира. Золотому миллиарду надо жить в чистом мирке, и пофиг что остальная планета загажена и люди не живут а выживают. А мой коммент это был сарказм. Но горький.
Factory in Video: Jung Won Iron Casting Corp.
영상 속 업체: (주) 정원주철
Home Page: www.jwcast.com
Phone: +82-31-998-5271~4
Fax: +82-31-998-5275
E-Mail: jw4240@ hanmail.net
🟧♒🎵↙️🔠🇦🇪🇰🇼🇿🇦🇦🇹👾🦃🪰🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖🤖👽💫🦿🦿🦿🦾🦾🦾🦵🦾🦵🦾🦵🦾🦵🦾🦵💪🦿💪🦿💪🦿💪🦿💪🦿💪🦿🦿🦿💪🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦿🦻🦻🦻🦻🦻🦻🦻🦻🦻🦿🦿🦿🦿🦿🦿🦿🦿🦿
0⁰⁰
Thank you for the video!
Also ua-cam.com/video/vwV-Im_xlic/v-deo.html can be useful for you if you are looking for a cloud solution to store and share OEM drawings, 3d models catalogs
Working in smelting heat and such humid conditions is not a cake walk. Salute to this men.
11:55 - Просто гениальное крепление груза 😂 хотя может они чисто для кадра? :)
А в целом ролик хорош! Спасибо автору
Outstanding Video- Great photography and editing. The Craftsman shown are extremely talented and take pride in their work. Thanks for sharing this! Subscribed...
Beautiful pieces. Pride in manufacturing.
Very high quality manufacturing by a skilled workforce in a safe environment.
nicely done. I saw some beautiful covers in the city of Osaka Japan, nice design work.
제조공정 영상을 멋지게 만드셨네요. 열악한 환경에서 많은 분들의 노고에 응원을 보냅니다. 늘 안전이 최고입니다.
Какие ж они молодцы, поэтому и живут как люди.
У нас в Рязани есть точно такое же производство :). Только качество литья выше - токарить не надо. А наши люки установлены даже на Красной площади.
brings back memories of being head sand moulder on assembly line making 100s of manhole covers/collars every week ,hard work
Some actual explanations of what they were actually doing would be nice.
Stuff goes in one side of the factory and manhole covers come out the other. Simple :)
나도40년가까이주물하고있지만직업자체가힘들고고된일이죠
그래서 주물 공장에서는 외국인 근로자들이 많은 가 봅니다.
cool to see the investment casting molds made
04:10 Nice. T-800 ending scene of terminator 2.
What an awesome youtube channel, amazing to see such scale of production :-)
Gotta love the knockoff Terminator 2 theme in the background.
у меня через забор производство пластиковых люков -если ветер в нашу сторону -дышать невозможно !!))
Amazing process
what a beautiful manhole!
nice work that would be cool if all man hole was like that
Enjoyed your video and I gave it a Thumbs Up for support
The Pakistanis can learn about safety from this video
Зачем??? Они в сандалиях работают, пофиг на технику безопасности!
@@ershvv7567 I only speak English
@@kenbakker3241 That shit is gross tbh
Come on, it's fun watching a guy weld in flip-flops with nothing but sunglasses on.
몰랐던 과정을 영상으로 보니깐 너무 신기하고 좋네요 ^^
영상도 깔끔하고 촬영 및 편집 하시는분이 잘 하시는거 같아요~
저도 유사한 컨텐츠로 이제막 첫 발걸음을 시작했는데요~
많이 벤치마킹하고 배워서 유익한 채널로 거듭나겠습니다^^
Nice video, I'd prefer it without the music though. The sound of factory work is good enough on its own!
LMAO, who cares
Увидели бы это всё парни с Бангладеша , вот бы они удивились 🤣
Beautiful work to see 💪 💪 💪
@9:12 what type of carbide/Insert is that any ideas?
0:10 왠지 "우리나라의 강철원반 맨홀뚜껑을 아시나요?" 라는 대사가 나올것같은 브금
Excelente trabalho Parabéns
👋👋👍👍💪💪
제목만 한국어로 변역한 베트남이나 필리핀, 동남아쪽인줄 알았는데
한국이어서 깜짝놀랐어요!
Hi, can you tell me about the black pigment used in the paint? Thank you
It's tar. 😊
Good job keep it up 👍
What is the process of making woman hole covers? Are they bigger and same shape?
I don't know. I'm not a biologist!
@Arty F Harty They are similar except they tend to rattle a lot more and are reluctant to open up unless your are called Chad or Tyrone.
I'm surprised at the lack of eye protection, simple safety glasses. Am I missing something? The Koreans are usually ahead of the curve.
이 제품도 무늬를 넣고 색을 넣으면 비싸지나요?
좀 더 무늬를 다양하게 예쁘게 만들면 좋겠습니다.
عاشت الايادي عمل جيد جداً
ممتاز عبد علي /من بغداد العراق
Dyan ako nanggaling ganyan din ginagawa ko noon that was 1994 up to 1996 2years ako dyan, tanong ko lang kung dyan pa si Mr sung kapatid ng may ari ng kompanya
7:49 Ow my back!
Nice touch with the paint...enamel?
Black is ascon, colors are urethane. 😀
마지막 차에 적재할때 안전장치를 저거 하나로 고정시키네 ㄷㄷ
09:50 I would enjoy doing this part.
Excellent
This is excellent
menarik untuk dilihat videonya
You folks put a great bunch of vids together, well dine realy like watching. Thanks
Когда наши технологи решат, что канализационные люки необходимо обрабатывать на токарных станках, значит мы точно долетим до Марса.
Такая технология литья, даёт достаточную точность и без обработки. Зачем их токарить - загадка.
Person hole cover’s …………..please!
동영상 내용중에 있는 지 모르지만 도로상의 맨홀을 지날 때마다 차가 덜컹거리는 걸 막을 수 있는 맨홀은 못 만드나요? 독일에서는 맨홀 높이를 조절하는 제품이 있어서 덜컹거리지 않고 잘 지나가던데...
차가 덜컹거리는건 도로시공시 맨홀과의 단차를 맞추지 않아서 일것 같습니다
E só vc mudar p Alemanha
그건 도로시공시 문제 뭐든 규격대로 만드는게 원칙인대 기계로 만들면 뭐해요 후작업 하는놈들 도로교통부가 병신 인걸 아님 계측을 하고 도로를 깔때 부분 특이사항 넣어서 맨홀뚜껑 제작하면 되요 그런대 그거 통과하겠어? 예산들어가는대 승인 안나지 그냥 위에 대가리 들 문제임
그래서 맨홀뚜껑이 동그라미인 이유가뭔가요
사각형 같은 다각형은 대각선이 한 변 보다 길어... 뚜껑이 맨홀 안으로 들어갈 수도 있기 때문에 원형으로 만듭니다. 😀
nắp cống hình tròn là hình duy nhất không bị rơi xuống lỗ cống.
Whatt? I was expecting barefoot guys working on a dirt floor!!
This is a modernized factory in Korea. 😀
i was waiting for people start throwing things on the ground!
En México las tapas son de plástico resistente ya se están sustituyendo por las metálicas
Plastic manhole covers sound crazy.
I didn’t see where they put tubes to get the molten metal to the two large castings. And why did they dip that other outer ring in ceramic?
LMAO
2:55 If you look closely in the right corner, you can see a path made of Styrofoam for molten metal. And the reason they dipped the mold in cement holds the shape when the molten metal flows. thank you for watching! 😀
The process is basically lost foam investment casting.
The form is made from foam, and gets vaporized by the molten metal.
The form is coated in ceramic (the investment), and the ceramic is then what becomes the actual walls of the mold.
The form is loaded into the sand to support the ceramic and slow cooling. The sand is only a support and insulation, this is why it is not packed around the form like they did with the covers.
@@joshua43214 Thanks for the explanation, i was wandering the same. I know that smaller cast iron items like fittings for plumbing and brake discs are made in automated process, DISA machines comes to my mind, is that not possible with something like this?
металлурги в медицинских масках )))) как это мило.
а это чтобы быстрее откинулись
@@Hunter-eo5fz почему?
Так чтоб ковидом не перезаражали друг дружку, а так вероятно вообще без масок работали.
Они от пыли защищают. Это не медицинские маски у них другой материал в основе.
현재 뛰어난 디자인의 맨홀뚜껑이 많고 통장잔고가 넉넉하면 벽 장식이나 바닥재로 사용하면 장쾌하고 심오한 공간을 맛볼수있다.
نحن بحاجة لمصميمين في الحاسوب وحساب الدقيق للابعاد المسافات والمكعاب والربعات والمستطيلات
素晴らしい
-Профессия?
-Токарь-расточник канализационных люков!..
Once all the big cities in North America had their own foundries.
First the mini-mills killed them, then China.
Is the black coating added at 9:33 japanning?
It's asphalt tar. 😀
4:07 I'll be back.
電腦設計圖-砂心模鑄蓋模
半自動快速投砂搗實過程
安全將廢鐵片錠吊入熔爐
應該是鑄鋼品不是生鐵熔液
鑄成脫砂送入噴鋼珠箱加工
再送入旋盤箱內車床修加工
㓎渡柏油漆再人工上彩色藝
品管抗壓測試..應超過噸數？
原本翻砂都是人工地面作業
廠區少塵煙動線順暢人安全
👍👍👍⋯⋯
I “chiusini” in Italia sono un altra cosa😂😂😂
주물집에 터닝도있네요 ㅋㅋ
All that damn work to prep a mold to cast. Then the process of setting up the cast is more important than the pour or debur. Next time you see a manhole cover think of the hard work these people put in that create them.
Think if the Pakistani had this machinery! They are floor casting using their feet to pack in the black sand around the mould.
Pakastani makes them faster.
i wish i could go there as a business owner, the safety standards look really cheap
Wow. No eye protection when pouring molten iron. 😳
Mask or safety glasses one or the other.
непонял, а зачем на токарке ровняли?
у меня ответчественный люк, насколкьо я помню - он без всякого токарника достаточно точоно отлит
Возможно другой уровень допуска. Исключить любые движения люка и минимизировать газопроницаемость если это нужно.
@@les0nick как вариант
Но что через 10 лет делать когда открыть надо будет - ломом тока если обстукивать....
@@alexkeda4950 есть гидравлические приблуды. Я думаю этот вопрос они решили.
@@les0nick да понятно что всё решаемо
Вопрос в трудозатратах
Тут весной хорошо подогнанный пластиковый открывал, сковырнул его нахрен ;))
只単に荒い大まかな鋳造を行って、加工で形状を安定させているのでしょうね。
dats freakin dope 😝
Y las tortugas ninja felices!! Jajaja 💚🐢🐉⚔️
⚫⚪⚫⚫🚚
I need a cover for my manhole as well 🙈
How about a plug?
우먼홀은 없나요
많죠
Anyone hazard a guess as to why they are circular and not some other shape?
It's the only format where the lid can't fall through the seat, it can happen if they were square or rectangular and you try to close the lid oriented diagonally.
@@WickedTRX Bingo!
Legends thanks 👍
Did you know that they manhole covers round so they don’t fall in !!,
Формы пенопласт покрытый жаропрочным составом?
Это модель, при заливке она сгорает.
@@ИгорьБлиов Понял. По видео не совсем понятно.
O am interested to distribute it for philippine market
You can contact them by Phone: +82-31-998-5271~4, Fax: +82-31-998-5275, jw4240@hanmail.net 😀
Bei Werbungseinblendung blende ich den 👎 automatisch nach unten ein. Meine Zeit ist dafür zu kostbar!
Herr Gott, die Drehmaschine heisst wirklich "Schiess"! )))
FCD 재질이네요.
진짜 대한민국 산업현장 보호장구 참...안타깝다
저 수준이면서 젊은이들이 안온다 찌질. 🤣
면마스크 ㄷㄷ
@@내가니형이다 결혼 왜 안 했냐고 물어보는건 덤
Music Thanks to Hideo Kojima
🤣🕹🤣
⛔️ ALWAYS USE 3 OR 4 CHAIN FOR LIFT MATERIAL OR
OTHERS = SECURITY AGAINST FATAL ACCIDENT
If everybody did everything as safe as possible nothing would ever get done.
만드시는 과정 부터 안전에 유희해서 하시네요 중간 검사 및 외관 코팅 압력 테스트 시험까지
맨홀보수 하는 업체 독일에서 대려와야 됨...한국 보수업체 대다수는 아스발트와 높이도 못맞추고 웅덩이를 만듬...
이번에 서울에 월계역 근처 중량천에 새로 만든 도로를 지나갔는데...manhole이 우퉁불퉁 엉망이더라구요.
아스팔트 높이를 잘 고려해서 설치해야 하는데 서로 업무 소통이 안 되고 있다는 느낌이 드네요.
Полистироловый молд? Он без токсинов выгорает потом?
Литьё по газифицируемым моделям. В баках создаётся разрежение вакуумным насосом, в зону где находятся рабочие практически ничего не попадает. Мы также люки для Мосводоканала изготавливаем :)
@@---vx5lj интересно какая зарплата за такой труд?
@@jday3965 Порядка полтинника + вредность + отпуск длинней.
@@---vx5lj если для провинции ну плюс минус нормально ,но все же вредность большая на таком производстве .
@@jday3965 При выплавке метала, там столько всего в воздухе, что выгоревший пенопласт просто теряется на общем фоне. При запуске дуговой печи весь цех заполнен дымом в котором и сульфаты, и нитраты, и микрочастицы металлов.
Там где пенопласт, хоть вытяжка есть нормальная.
Вот он практически весь российский металл.
И газ. Очень энергоёмкое производство.
Корейцы, однако, молодцы. Не имея особых природных ресурсов и не лучшие земли для земледелия очень достойно живут. Работают, правда, очень много.
Throw that wacuum pump to house roof, it makes mad.
круто
🤩🤩❤❤
신기하네. 맨홀은 연성이 약해도 되는 거였구나.
연성이 문제가 아니라 취성이 문제죠.
@@gyseo61 그렇군요
Just like in Pakistan!
Nah, the guys in Pakistan wear sandals not boots, do not wear safety glasses, throw hot metal around and don't use benches. But they still get the job done.
Saya ada💪💪
Oh ya.yg.. mana kamu kak..
Bangla smakin didpan..fighting
terminator song
interesting
I install man holes, water and sewer main. Our water parts we put in the ground say made in China. Man hole covers, made in China. Pretty sad
Most of the "MAKE AMERICA GREAT AGAIN" hats were made in China. We don't make much anymore. America was killed by our own greedy politicians.
Some English speaking country is receiving these manholes. The high GDP rate in Asian countries (GDP = production, what the nation produces and how quickly) is why are they not made where they are going?
How did iron forging migrate from the US to Korea or from England to Thailand? Will America ever perform higher than 2% GDP? Such a low GDP the nation cannot pay its debt and with such a wide gap in income, workers will never earn more than the current price of labor, and all of or most of the 2% GDP is bought by extremely rich people. This is a wake up call for American labor. In this episode of history, my hunch is that workers unionizing will only bring about Capital Flight. Unionization would have prevented capital flight but now I think it will be harmful to workers and not the answer to companies so big they can open shop in Asia. Big companies will have to be forced to stay and invest. France was wise, they made it a law their corporations cannot leave France without real reasons approved the government. Netherlands, similar. Germany the workers are part owners of production, in America the workers are totally unattached to production. Americans call this ‘freedom’. A costly price for freedom when you look at the condition of the working class in the US. Fully loaded in debt and cashless. Worse is the inflation that Biden does nothing about. Nixon at least froze prices and wages to curb inflation. This time around the politicians do not even bat an eye at the eroding effects of inflation on worker’s earnings. They raised interests rates, thinking this will discourage employers from raising prices and it will, slow and long over a period of time, not before a lot of people are damaged from inflation.
Will Korea face the same decline of industrialization seen in America and England with their low GDP rate (2%) and when wages rise high enough the companies pack up their gear and split? Seems inevitable economic decline is what happens when production is divided between two economic interests, worker and their employers. There is a struggle and one of them is left holding the bag.
casting* :) forging is squishing with big hammers and presses
we have super expensive free healthcare that prices us out of the market
@Jk Ok, ready for your lesson that you missed. Did you ever see a graph with a line that travels from zero and rises to higher number over a period of years? That is called a chart. Wages is represented by the line in the graph, the line extends over 20 years when wages were low in Asia to where they are now higher than 20 years ago. You get the point now? Just as wages rose high in the US, wages will rise generally in Asia. When they cut into profits the companies you work for will leave just as they did in the US. Textile industries go first, left the US in 1980 with the passage of NAFTA.
You don’t know what I am talking about because you are not trained in the life cycle of modern industry, i.e., the business cycle.
@@jamescollier3 Healthcare in the US is a thing you can buy. But only the healthcare provider (corporation) can buy and sell healthcare. They buy it cheap and sell it dear to each other. Their job is to make their healthcare insurance profitable to be sold or attractive enough for another buyer of their healthcare insurance program that the hospitals are connected with in the network system they designed for themselves. The end user of health care is forbidden by law to buy or sell their healthcare. Doesn’t sound like a free market system to me. Sounds like the way a street drug cartel operates guarding their turf. Another thing, it is illegal to develop a vaccine to treat a disease in the US as long as a treatment for that disease exists even if that treatment is not 100% good. The providers have laws that will enable them to take your vaccine development and market it for themselves and have you locked up in jail. What a sick system, eh?
In the end healthcare is a thing you can buy where the rich live and poor die in America and the hospital system rates as a death sentence.
@@MrDXRamirez NAFTA came into effect in 1994 during the Clinton Regime.
Carter was president in 1980, despite his (many) faults, he never would have given us NAFTA.
And now i know how bitcoins is appearing!
Да, это не Пакистан, никаких пижам и шлепок на голую ногу
но принцип тот же я даже не удивлюсь если и качество одно и то же
작업 환경이나 안전 장치가 부족하다 보니 안전 의식도 부족하게 보이는 거 같습니다.
Как то все это сложно. То ли дело Пакистан... А эффект тот же.
Поэтому в Пакистане люк стоит в сто раз дешевле Корейского.
Только в Корее рабочий доживет до старости, а в Пакистане помрет в глубокой старости от кучи болезней - лет в 35)))
И цены там всего раза в два отличаться будут, а качество намного хуже как и повторяемость.
ЗЫ: в Пакистане про выплавляемые модели слышали наверное только в сказках)))
@@vasiliiv9532 ну и что? Это же капитализм. Одни страны живут за счет других. Убирают у себя вредны производства в страны третьего типа мира. Борются за зеленую энергетику, а производят агрегаты для нее опять же в странах третьего мира. Золотому миллиарду надо жить в чистом мирке, и пофиг что остальная планета загажена и люди не живут а выживают. А мой коммент это был сарказм. Но горький.
I thought manhole covers, were a pair of underpants lol
Да...металлические крышки - вещь!!!А то сейчас мода на пластик пошла...наступил и провалился в подземное царство.
стальную крышку 15 мм проломишь ? ее себестоимость ниже.
buen video aca donde vivo no lo hacen porque se los roban para venderlo al chatarrero