Building PVS-31 Clone Night Vision [WP GEN2.5 IIT]

Поділитися
Вставка
  • Опубліковано 18 гру 2024

КОМЕНТАРІ • 446

  • @JaMikePhotography
    @JaMikePhotography 3 роки тому +262

    I hear the flannel daddy music, I hit that like button

    • @nighthorus
      @nighthorus  3 роки тому +6

      Thank you so much.

    • @e3n975
      @e3n975 2 роки тому +5

      @@nighthorus where did you get the housing for it ?

    • @chase_h.01
      @chase_h.01 2 роки тому +6

      Nah this Filthy Frank music first and foremost

    • @DK-zv7tp
      @DK-zv7tp Рік тому

      @@nighthorus What is the FOM value of ITT shown in this video?

    • @swib6993
      @swib6993 Рік тому

      Can i order a set

  • @tacticalfacepalm20233
    @tacticalfacepalm20233 3 роки тому +256

    I built a set at the beginning of the summer, my total cost was 800 USD. great work!!!

    • @nighthorus
      @nighthorus  3 роки тому +29

      That's nice. Keep up the great work 👍

    • @tacticalfacepalm20233
      @tacticalfacepalm20233 3 роки тому +19

      @@nighthorus thanks man, Im making another set, where did you get your IITs?

    • @nighthorus
      @nighthorus  3 роки тому +23

      @@tacticalfacepalm20233 I got it from an agent in my country

    • @tac6vikingactual227
      @tac6vikingactual227 3 роки тому +17

      I would be very interested doing the same, I'd like to figure out where you got your parts from

    • @SB-xb3td
      @SB-xb3td 3 роки тому +18

      How did you do it for so cheap?

  • @boosted95
    @boosted95 2 роки тому +43

    Lot better than my clone. I only used 2 toilet paper tubes with some green glow sticks inside. All held together with some duct tape.

  • @PlagueHD1080p
    @PlagueHD1080p 2 роки тому +43

    Would you mind providing a link to each of the parts you got, The Clone, Tube's, ect...

  • @chip5403
    @chip5403 Рік тому +9

    The music that plays as I do a tactical random raid on my neighbors house at 3 am with PVS 41

  • @emmettk554
    @emmettk554 2 роки тому +37

    Thanks so much for blessing us all with the holy powers of night vision

  • @felipevazquez123
    @felipevazquez123 Рік тому +66

    We wanted one of this to see the critters in our backyard. ua-cam.com/users/postUgkxGix1RueFf66g4dKZ0w4Qsw_3Vv6Xqant The first thing that I like about this is that it has a rechargeable battery. The other is that it is small and fairly easy to use. The instructions weren't too great but we played with it awhile and figured it out. Can see very well in our back yard down to the woods which is roughly a football field length in the dark. There were certainly more expensive ones out there but this works for us and was within our price range. We have not tried the video recording portion and may update the review later.

  • @ordomaliosangeloseterna6832
    @ordomaliosangeloseterna6832 Рік тому +14

    When I was a younger almost 20plus years ago there was a toy some kids had that looked just like the new 4 nod nvgs. It even had the eye divider glass for the site picture . It was white and purple and were supposed night seeing devices. I wonder if they got the patent from that toy company or if it was the other way around.

    • @dj1NM3
      @dj1NM3 11 місяців тому

      You mean the toy NODS packaged with the "dark edition" of "CALL OF DUTY - Modern Warfare" ?
      ua-cam.com/video/JkbrDnm7xV0/v-deo.html&pp=ygUwTW9kZXJuIFdhcmZhcmUgRGFyayBFZGl0aW9uIG5pZ2h0IHZpc2lvbiBnb2dnbGVz

  • @skinny4070
    @skinny4070 2 роки тому +4

    Cat’s all class. Nice back ground music

  • @おは太郎-r9q
    @おは太郎-r9q Рік тому +1

    かっこいい!いつか僕も手に入れたい!映像を作ってくれてありがとう! from japan

  • @PrellaProductions
    @PrellaProductions 2 роки тому +4

    man old garand thumb intro music hits different

  • @americandodo8309
    @americandodo8309 3 роки тому +8

    This was really neat. Nice work Night Horus.

  • @NicoleSmith-jf5yb
    @NicoleSmith-jf5yb 2 роки тому +14

    can you please list where you got the parts from?

  • @detectiveamevirus8
    @detectiveamevirus8 2 роки тому +3

    Damm pretty clear night vision goggles

    • @nighthorus
      @nighthorus  2 роки тому

      Thanks, It's really clear.

  • @Flash-Strike
    @Flash-Strike 2 роки тому +2

    QUESTION the Clone is the one used in airsoft? Tkx

    • @nighthorus
      @nighthorus  2 роки тому +3

      I have never used it with Airsoft. However, when I was climbing a low mountain, I fell and hit PVS-31 on the ground, but it’s still working. Maybe the durability is good.

    • @Flash-Strike
      @Flash-Strike 2 роки тому +1

      Thanks I trying to find the clone, you see I from abroud and dont know exacly were to look for a clone, I only found airsoft replica

  • @chaserichards3261
    @chaserichards3261 2 роки тому +4

    Idk why but it was so calming. Cool vid nonetheless, but the asmr was on point.

  • @jasonbyrd5150
    @jasonbyrd5150 2 роки тому +9

    Do you have a link to the parts? Or a build list?

    • @jdontrevino-lp8pb
      @jdontrevino-lp8pb Рік тому +1

      Hay if you find some parts to buil some nvgs let me know I want to build my own

  • @kiddowenproductions8152
    @kiddowenproductions8152 3 роки тому +14

    Can you make a few short out door vids with this set up? Like in the darkest conditions, cloudy nights, and indoors?

    • @nighthorus
      @nighthorus  3 роки тому +2

      I'll challenge. But before that, I should buy a high ISO camera.
      sony a, sionyx or something.

    • @michaelbattin
      @michaelbattin 9 місяців тому

      @@nighthorus heck you can make one. Can you suggest where to purchase the parts needed?

  • @Silent-sm3lq
    @Silent-sm3lq Рік тому +4

    No O-Rings? Enjoy the rain my main.

  • @Edmund_Mallory_Hardgrove
    @Edmund_Mallory_Hardgrove 2 роки тому +5

    Where are the links to the products used? Where did the cloned housing come from? Is it a quality unit?

    • @Angry-Little-Fish
      @Angry-Little-Fish 6 місяців тому

      Coldharborsupply it will run you around 4 to 6k to build them

  • @Red80008
    @Red80008 2 роки тому +1

    GREAT choice of music!!

  • @BaptSimracing
    @BaptSimracing 2 роки тому +1

    newbie question : Why the little hole in the butler creek ? thanks.

    • @nighthorus
      @nighthorus  2 роки тому

      The reason for making a hole is to confirm the operation in a bright place, And a simple aperture function.

  • @dannyfedoruk
    @dannyfedoruk Рік тому +3

    How does it perform without nitrogen purging? I imagine any temperature change would cause them to fog up

    • @basekiff
      @basekiff Рік тому

      purging is not necessary.

  • @That1AirsoftGuy
    @That1AirsoftGuy Рік тому +1

    could you please link the housing you used. I would love to make one of these.

    • @iamnotacriminal
      @iamnotacriminal Рік тому +1

      Fr I see some housing with button battery boards that can’t be the correct ones?

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      ​@@iamnotacriminal What are you talking? There is literally not a SINGLE housing on the market with button batteries. The market is full of different housings. The 31 is the most used housing ever.
      Its not even possible to not find them.

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      Alibaba.

  • @enigmafusion
    @enigmafusion Рік тому +5

    Where did you get the housing? I am finding some clones for 50 USD. Do they come with the correct lens and electronics to just drop in an IIT tube, or do I need a parts kit? I am planning on building one of these myself.

    • @swirlypan4174
      @swirlypan4174 Рік тому

      I don't think you'll find a clone with objective lenses on them and you'll also need to do some wiring on them

    • @enigmafusion
      @enigmafusion Рік тому

      @@swirlypan4174 this was 7 months ago, but i have pvs 7 now

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      What are you talking about? In which dream fantasy world do you live in? 5O bucks? Wtf
      More like 5OO - 1OOO

    • @enigmafusion
      @enigmafusion 9 місяців тому

      @@aesthetic8780 This comment is a year old before I knew anything about night vision. Most people don't really know how this stuff works and just ask questions to learn.

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      @@enigmafusion Sorry bro. I'm just an ridiculous a hole.

  • @elouafitaharrast1721
    @elouafitaharrast1721 2 роки тому +2

    The housing is an fma one? Or another brand i don't want to buy twice so i ask ahahahah

    • @nighthorus
      @nighthorus  2 роки тому +1

      This housing is a LINDU OPTICS PVS-31.
      I bought in alibaba.

  • @anacondamusic6970
    @anacondamusic6970 3 роки тому +2

    I have a question, this is with aliexpress, and it all goes into the package, give me a link

    • @nighthorus
      @nighthorus  3 роки тому

      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html

  • @jackhamlett9835
    @jackhamlett9835 2 роки тому +1

    Night Horus, where did you buy those from?

  • @calebyang9230
    @calebyang9230 Рік тому +3

    I’m super interested where u got the clone pvs 31 housing because im looking into building one, it looked great and came with objective lens and other internals, it would be great if u can tell me the name or a link

    • @nighthorus
      @nighthorus  Рік тому +1

      I used a LINDU OPTICS PVS - 31 housing.
      by the ways, I bought the nods housing on Alibaba.
      I'm not sure if you can get one on Alibaba at the moment for $2000.
      but there're other interesting PVS-31 clone housings out there besides LINDU, so check them out.
      Also, although it's not the URL for this product, I found a store like this
      www.aliexpress.com/store/1102475008?spm=a2g0o.detail.0.0.305aTPZtTPZttB
      Good Luck

    • @bradt5426
      @bradt5426 Рік тому +1

      ​@@nighthorusWhat other housings exist? Don't see any good ones.

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      ​@@bradt5426 There are so many on Alibaba.

  • @travislupum
    @travislupum 2 роки тому +2

    I was unaware I could do this until now my budget is limited even building for myself but I am going to do this

    • @nighthorus
      @nighthorus  2 роки тому +2

      That's nice. Good Luck👍

    • @travislupum
      @travislupum Місяць тому +1

      ​@nighthorus 2 years later and I built 2 pvs14's and a pvs7 i did get my hands on some thermal for a dualband set up and next I am looking to build my own quad-pan !!!!!! You really kicked off my interest in this game and I went full bore thank you !!!!!!

    • @noahjames6713
      @noahjames6713 2 дні тому

      @@travislupumhey travis, did you use the FMA “dummy” models for the housing?

  • @johnbraun5465
    @johnbraun5465 2 роки тому +1

    Where did you buy the clone housing I can’t find it

  • @zachm7088
    @zachm7088 3 роки тому +3

    What brand is the housing.can you provide links to materials please

    • @nighthorus
      @nighthorus  3 роки тому +1

      LINDU OPTICS PVS 31 Housing.
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html

  • @The40SW
    @The40SW 2 роки тому +1

    Thanks for posting. Would you tell me the parts sources please?

    • @nighthorus
      @nighthorus  2 роки тому +1

      Housing
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html
      IIT
      My country IIT agent is told not to tell you where you bought it, so IIT can't know it. However, here is the IIT that fits this housing. But GP.
      www.alibaba.com/product-detail/37-31MM-Image-Intensifier-tube-for_62294623513.html?spm=a2700.9114905.0.0.Wzr96h
      Good Luck👍

    • @The40SW
      @The40SW 2 роки тому +1

      @@nighthorus Thanks

  • @Ares-TN02
    @Ares-TN02 11 місяців тому +1

    Hi, did I misunderstand or did you create an NVG using the housing of a PVS31 Dummy and 2 analog tubes? Is the procedure simple as seen in the video or are there other steps you have omitted? What is the cost of all?

    • @moistenedeel4791
      @moistenedeel4791 9 місяців тому

      I did the same and the cost was just under 4 thousand with 1700 fom tubes

    • @Ares-TN02
      @Ares-TN02 9 місяців тому +1

      @@moistenedeel4791 I decided to try a Jerry31. I had a PVS14 with 1700 FOM NNVT5 and I took a Jerry with 1600 FOM NNVT4. We hope well🤞🏻

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      ​Why downgrading so heavy? NVT-5 has modern performance like OMNI 7. Nvt-4 has omni 3-4 performance. Thats a big difference​@@Ares-TN02

  • @doctorchaotic3415
    @doctorchaotic3415 2 роки тому +1

    How much does it all cost? Would this option be more benefit than buying more expensive real deal product?

    • @nighthorus
      @nighthorus  2 роки тому

      The cost was about $6000.
      You can easily get PVS-31.

    • @doctorchaotic3415
      @doctorchaotic3415 2 роки тому +1

      @@nighthorus thanks for the tip. I wanted to get into the night shooting game aswell for along time.

  • @beatpictures8961
    @beatpictures8961 2 роки тому +1

    Hi where can i get the tubes and how much are they?

    • @nighthorus
      @nighthorus  2 роки тому

      I didn't buy it here but it was a candidate for purchase.If you buy one tube, about $1300 including shipping.
      www.alibaba.com/product-detail/37-31MM-Image-Intensifier-tube-for_62294623513.html?spm=a2700.9114905.0.0.E9ssFl

  • @OmarHernandez-qp6tj
    @OmarHernandez-qp6tj 2 роки тому +1

    What brand is the clone housing for the pvs? I suppouse its the FMA with leds? AWESOME!!!

  • @uknowngamer8852
    @uknowngamer8852 2 роки тому +1

    Where did you get the white phosphorus from?

    • @nighthorus
      @nighthorus  2 роки тому

      Actually, I'm not sure. i think the IITs from Russia, China or somewhere maybe

    • @uknowngamer8852
      @uknowngamer8852 2 роки тому +1

      @@nighthorus Oh okay thanks

  • @someonehere4763
    @someonehere4763 3 місяці тому

    wait, how is it powered? from my understanding it has to have a battery to power it.

  • @Live1509
    @Live1509 2 роки тому

    Why there isn't any gasket between tube housing and the mount? 🤨

  • @JJDunne
    @JJDunne 2 роки тому +2

    @Night Horus , do you have a parts list needed besides the PVS31 clone? links would be helpful too

    • @nighthorus
      @nighthorus  2 роки тому +1

      1) PVS-31 clone housing
      LINDU OPTICS www.alibaba.com/product-detail/LINDU-OPTICS-large-IPD-range-FOV_1600088148554.html
      Visionking www.alibaba.com/product-detail/Visionking-Optics-Fov-50-Degree-Gen_1600055595788.html
      2)MX 10160 IIT sry I don't know about IIT because the seller has asked me to keep it private.

    • @ggalbreath1234
      @ggalbreath1234 2 роки тому +2

      Still like 10gs just for the housing it seems.

  • @Mikey-Himself
    @Mikey-Himself Рік тому +1

    Where did you purchase the complete housing with electronics/lenses?

  • @tompz
    @tompz 2 роки тому +1

    It has been over a year, how has the lindu housing held up for you?

    • @nighthorus
      @nighthorus  2 роки тому +3

      No problem. It's still working.

  • @scottyxiong7733
    @scottyxiong7733 Рік тому +1

    What was the overall cost for the kit. And web link will be nice also

  • @correamax449
    @correamax449 2 роки тому +1

    Where can i find that housing i World lime to bulid one my self

    • @nighthorus
      @nighthorus  2 роки тому +1

      Alibaba LINDU PVS-31
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html?spm=a2700.9114905.0.0.5HslE1

  • @giuseppecrescio117
    @giuseppecrescio117 2 роки тому +1

    Great video!!! Rhanks a lot, really! What about the gain? Auto or manual?

    • @nighthorus
      @nighthorus  2 роки тому +1

      Thanks. The IITs auto gain.

    • @giuseppecrescio117
      @giuseppecrescio117 2 роки тому +1

      @@nighthorus l sent a message to the Chinese brand Lindu, unfortunally right now they don't have the high version but just basic and medium version with FOV 40°...

    • @giuseppecrescio117
      @giuseppecrescio117 2 роки тому +1

      On the site is wrote manual gain

  • @cjquispe
    @cjquispe 2 роки тому +1

    I PUSH THE LIKE TOO PLZ BRO WHENRE YOU BUY THE HOUSING ALLIE? and the IIT: MX10160 Gen2.5 White Phosphore?
    i´ll appreciatte that thx

    • @nighthorus
      @nighthorus  2 роки тому

      Thanks.
      1) PVS-31 clone housing
      LINDU OPTICS www.alibaba.com/product-detail/LINDU-OPTICS-large-IPD-range-FOV_1600088148554.html
      Visionking www.alibaba.com/product-detail/Visionking-Optics-Fov-50-Degree-Gen_1600055595788.html
      2)MX 10160 IIT sry I don't know about IIT because the seller has asked me to keep it private.

    • @cjquispe
      @cjquispe 2 роки тому +1

      @@nighthorus you can only buy the housing is more cheap right ?

    • @nighthorus
      @nighthorus  2 роки тому

      @@cjquispe Yes.

  • @sk8phil
    @sk8phil 3 роки тому +1

    How did you purge the air from the tubes and culminate them?

    • @nighthorus
      @nighthorus  3 роки тому +2

      I used an air duster used for a PC.

  • @longonponce
    @longonponce 2 роки тому +1

    Wait!!!! You brought a FMA PVS-31 clone? And drop image intensifier in the clone and it work?? And how much $$$$

    • @nighthorus
      @nighthorus  2 роки тому

      This is a LINDU OPTICS PVS-31 housing.
      Total cost was about $6000.

    • @longonponce
      @longonponce 2 роки тому +1

      @NIGHT HORUS ok give me all the links

    • @nighthorus
      @nighthorus  2 роки тому

      @@longonponce
      housing
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html?spm=a2700.9114905.0.0.yKHUS3
      Tubes
      www.alibaba.com/product-detail/37-31MM-Image-Intensifier-tube-for_62294623513.html?spm=a2700.9114905.0.0.E9ssFl

    • @longonponce
      @longonponce 2 роки тому

      @@nighthorus so I work in the electronics and electrical industries and I have a FMA PVS31, you think I can convert it to a working one? I need wire diagram. Or do you know who/where I can get the electrical components

  • @chrisr.1039
    @chrisr.1039 2 роки тому +7

    Great video. I'm new to the game and looking into building a set for myself. Would this housing work with any green phos iit?

    • @nighthorus
      @nighthorus  2 роки тому +4

      I think that there is no problem if it is MX10160 type.

    • @chrisr.1039
      @chrisr.1039 2 роки тому +1

      @@nighthorus Thank you! I noticed you have White phosphor but the link you dropped is for green tubes. Will the green tubes in that link work with the Lindu Optics housing?

    • @nighthorus
      @nighthorus  2 роки тому +1

      @@chrisr.1039 I think, Yes.
      BTW The color doesn't really matter. P20 Light Green, P43 Green, P45 White.... Whatever.
      I haven't purchased the tubes here, but I think they are compatible with LINDU PVS-31.
      The size of MX10160 is 1.448”diameter and 1.210”length.
      There are some errors in the calculation, but it should fit. maybe.
      1.448”x1.210”=about 36.7mm x30.7mm
      37mm x 31mm IIT
      www.alibaba.com/product-detail/37-31MM-Image-Intensifier-tube-for_62294623513.html?spm=a2700.wholesale.0.0.71094bc50VSg0p
      Please purchase at your own discretion
      and Good Luck🤞

    • @izayaorihara7059
      @izayaorihara7059 2 роки тому +1

      @@nighthorus
      May we know where you got the white phosphor tubes?

    • @nighthorus
      @nighthorus  2 роки тому

      @@izayaorihara7059 I bought it from an agent in my country. The seller didn't tell me where I bought it. And he said "pls you're not to say who bought it from" BTW, Nods is legal in my country.

  • @catalyst8163
    @catalyst8163 Рік тому

    Where are the o-rings that go between the articulation arms and the pods? How would this hold a purge without them?

  • @mylesgalloway3920
    @mylesgalloway3920 Рік тому +1

    Wait how and where you get theses

  • @LTViniciusAlmeida
    @LTViniciusAlmeida 2 роки тому +1

    Hi. Where i can buy the MX10160 Gen2.5 White Phosphor?

    • @Аку-ю7ф
      @Аку-ю7ф 2 місяці тому +1

      bro hearted your comment then didnt reply thats crazy disrespect 😂

  • @LibertyArmsCo
    @LibertyArmsCo 2 роки тому +1

    Who makes the replica housing

  • @peterau1720
    @peterau1720 2 роки тому +2

    who made this housing?

  • @Shep01
    @Shep01 3 роки тому +1

    i have seen some stunning 3d printed models of the quads. but hey use much crappier inserts. where did you get the 2.5 gen tubes?

    • @nighthorus
      @nighthorus  3 роки тому +2

      That's Amazing.
      I bought IIT from an agent in my country.
      But he said ”I couldn't tell
      where he got it from.”
      BTW The IITs not used.
      As far as I know, KATOD, EKRAN, china, Russia or something maybe.
      BTW min order with EKRAN IIT is 20.
      Good luck

    • @Shep01
      @Shep01 3 роки тому +1

      @@nighthorus here you go as a present for you sharing. ua-cam.com/video/EC-WgZzpoNU/v-deo.html

  • @Heropk5
    @Heropk5 2 роки тому +1

    I know nothing about night vision, but isn't there supposed to be some sort of purging of something done? I'm guessing for water-proofing or something?

    • @nighthorus
      @nighthorus  2 роки тому +2

      Some do and some do not.
      I wouldn't even worry about it since the gas inside of the NODs will eventually escape in a few months.
      If you do this,
      use argon wine gas.
      With the opening facing down, remove the ocular lens and work in a sealable storage bag. Place the NODs in the objective lens unit and reinstall the ocular lens.
      Good luck.

  • @prodalright
    @prodalright 2 роки тому +1

    I’m confused, the Lindu housing is 10k how did you get the housing and the tubes for 6k total? Not tryna be rude just curious, and other than the experience of building NVGS, for that price wouldn’t it make more sense if you did spend the 10k to just buy actual PVS31s? I mean 10K for the housing and even being conservative with the price of your tubes wouldn’t it come out to be the same or even more price wise? Again not trying to be rude but I just wanna know if I’m missing something?

    • @nighthorus
      @nighthorus  2 роки тому +2

      It's not a mistake. I got the Lindu PVS-31 housing for 2k on Alibaba at the time.
      and Two 2k tubes For 4k total I got it.
      2k housing + 2k IIt x 2 ⁼ 6k
      Total cost of 6k.
      It may have gone up in price now. If you are interested, please contact the company via Alibaba chat.
      I don't know why the price is going up, but maybe it's cuz of the situation in Ukraine?
      Similar PVS-31 housings from other Alibaba companies should be available starting at 2k
      www.alibaba.com/product-detail/Visionking-Optics-Fov-50-Degree-Gen_1600055595788.html

    • @prodalright
      @prodalright 2 роки тому +1

      @@nighthorus awesome, thank you for clearing that up ❤️

    • @nighthorus
      @nighthorus  2 роки тому

      @@prodalright No prob👍

    • @aesthetic8780
      @aesthetic8780 Рік тому

      ​@@prodalrightWhat are you talking? You can even get it done for 4-5k with this housing. Stop talking shii.

    • @prodalright
      @prodalright Рік тому

      @@aesthetic8780 learn to read.

  • @yimmenjamir650
    @yimmenjamir650 3 роки тому +5

    I screamed like a baby when it worked haha ty♥️♥️♥️I’ll try making it tooo

  • @stfu4823
    @stfu4823 Рік тому

    wow brother just wow does it have a shut off and switch on button or do i do that by the caps?

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      What kind of questions is that? Wtf
      Just use the big knob. It even has "OFF - ON - IR - AUTO" on it.

    • @stfu4823
      @stfu4823 9 місяців тому

      @@aesthetic8780chill it was js a question but thanks

    • @aesthetic8780
      @aesthetic8780 9 місяців тому +1

      @@stfu4823 sorry, im an extremely big asš hole :(
      I don't why I'm always like this in the comment section. Sorry bro!

    • @stfu4823
      @stfu4823 9 місяців тому

      @@aesthetic8780no it’s alright man it’s good but the thing is are you alright? if you’re going through some shi tell me abt it bro i’m here for you ❤❤❤

  • @919delo
    @919delo 3 роки тому +1

    What the cheapest phosphor I can buy that will fit?

    • @nighthorus
      @nighthorus  3 роки тому

      Maybe,,, You can buy MX10160 Green Phosphor P43.

  • @yuriorlov47
    @yuriorlov47 2 роки тому +1

    Where may I get the clone to build my own?

    • @nighthorus
      @nighthorus  2 роки тому +1

      First of all, if you want to assemble, get PVS31 housing of Lindu optics in Alibaba
      Next, get the MX10160 IIT gen2 + or gen3 and assemble it. It is usually cheaper to assemble.

    • @yuriorlov47
      @yuriorlov47 2 роки тому +1

      @@nighthorus where's a good place to find the mx10160?

    • @nighthorus
      @nighthorus  2 роки тому

      @@yuriorlov47 This GP IIT Gen 2 was one of the candidates I had.
      I have never traded here. However, it is rare here that you can order from 1 min order.
      I think it's better to chat with the seller before making a purchase.
      Good Luck👍
      m.alibaba.com/product/62294623513/37-31MM--Image-Intensifier-tube-for-night-vision-PVS14-Housing--IIT-Gen2--HD-Level-60-IP-MM-for-NV-monocular--binocular.html

  • @kajhelin6822
    @kajhelin6822 3 роки тому +2

    How much was the housing alone? Seems like a decent unit.

    • @nighthorus
      @nighthorus  3 роки тому

      The housing cost was $1900.

    • @kajhelin6822
      @kajhelin6822 3 роки тому +1

      1900 usd sounds like very much for a simple housing. I paid 460 usd for a nvm-14 monocular housing including vat and shipping. I might get this one at sometime though.

    • @BattleChemist
      @BattleChemist 2 роки тому

      @@nighthorus The link you've posted from 6 months ago now shows that Lindu Optics housing for over $10,000. Quite the jump!

  • @despacitoRC
    @despacitoRC 2 роки тому +1

    is that NNVT gen2.5 WP?

  • @Da-jw8fb
    @Da-jw8fb 2 роки тому +1

    I’m thinking about buying a gen 1 monocular on Amazon and taking the IIT and battery system and transferring it into the PVS housing. Would that work?

    • @nighthorus
      @nighthorus  2 роки тому +1

      I think Maybe not. The tube that fits this NOD is MX10160.

    • @Mr_Glenn
      @Mr_Glenn 2 роки тому +2

      Gen 1 is pretty bad. You'd only see things with the illuminator on, everyone sees the red glow. Without illuminator you're better off with your own eyes.

  • @MyMd1111
    @MyMd1111 3 роки тому +2

    Cool, was thinking about the Lindu clones but had not the guts to pull the trigger. Will you be going for their quads either?

    • @nighthorus
      @nighthorus  3 роки тому +1

      Probably not.
      I'm not thinking about it now.

    • @Shep01
      @Shep01 3 роки тому +1

      @@nighthorus i have seen some stunning 3d printed models of the quads. but hey use much crappier inserts. where did you get the 2.5 gen tubes?

  • @ColoradoBergsteiger
    @ColoradoBergsteiger 2 роки тому +1

    Where did you find the clone housing?

  • @captnspino4149
    @captnspino4149 11 місяців тому

    Wonder if I could do this to some GPNVG-18s

  • @mtcondie
    @mtcondie 2 роки тому +1

    Great video!

  • @onlykotti5343
    @onlykotti5343 2 роки тому +1

    Where did u get the Housing ? is it the Fma ?

    • @nighthorus
      @nighthorus  2 роки тому +1

      No. It's not FMA.
      I used the PVS 31 housing made by LINDU OPTICS.

    • @onlykotti5343
      @onlykotti5343 2 роки тому +1

      @@nighthorus thanks Mate what did u pay for the housing ?

    • @nighthorus
      @nighthorus  2 роки тому +1

      @@onlykotti5343 I used VISA.
      LINDU OPTICS asked me to make a deposit by bank transfer or Western Union.
      However, I negotiated with them and purchased with VISA credit card payment.

    • @onlykotti5343
      @onlykotti5343 2 роки тому +1

      Crazy haha thanks for the Info :)

  • @alexpawak3885
    @alexpawak3885 2 роки тому +1

    Where did you get the clone body?

  • @joshzwiener6132
    @joshzwiener6132 3 роки тому +1

    What kind of focal adjustment are there? Is the housing capable with pvs14 lenses?

    • @nighthorus
      @nighthorus  3 роки тому

      In this NOD, the objective lens is used to focus.
      I don't know about the PVS14 lens cuz I don't have it.

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      No.

  • @jago5300
    @jago5300 2 роки тому +2

    Friend of mine bought a pair of night but I can for your helmet. It was pretty cool paid $6,000 for him. When you looked at all the clouds you couldn't see a star but with the binoculars you can see through the clouds and see all the stars. I don't know how much this one is but you can't see that in this video

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      There is not a single unit on the market thats able to see through clouds.

  • @richardscarlett7942
    @richardscarlett7942 Рік тому

    I believe you put those in backwards, isnt the little notch supposed to line up with a corresponding tab? I dont know , myself, i just watched a similar video and thats what they said

  • @spectre06x
    @spectre06x 2 роки тому +1

    what PVS-31 clone did you use?

    • @nighthorus
      @nighthorus  2 роки тому

      Lindu Optics pvs31

    • @spectre06x
      @spectre06x 2 роки тому +1

      @@nighthorus thank you! I went on your website and saw several options I'm interested in. How do we discussing price and any financing options?

    • @nighthorus
      @nighthorus  2 роки тому

      ​@@spectre06x I chatted directly with LINDU on Alibaba's site and asked. You can get started by pressing "Chat Now" on the site.

  • @ligmaleftybruh2073
    @ligmaleftybruh2073 2 роки тому +1

    Where did you get the housing? I’m trying to find a similar set but struggling to find some

    • @nighthorus
      @nighthorus  2 роки тому

      I found the housing on Alibaba.
      LINDU OPTICS PVS-31
      www.alibaba.com/product-detail/LINDU-OEM-factory-1X-binoculars-night_1600115721917.html?spm=a2700.shop_index.89.2.336a3481V8hRWx
      I paid $2000 for the housing and battery pack.

  • @battel6596
    @battel6596 Рік тому

    hello, sorry to bother you but I have a question, if I take the base from an fma with the green light (with the same wiring and changing the lens and putting it iit could work?, thanks a lot

  • @q.rsevercedalpha7191
    @q.rsevercedalpha7191 2 роки тому +1

    Out of curiosity how much did you spend in total on everything?

  • @dominicandawg3455
    @dominicandawg3455 3 роки тому +1

    Where do you get the clone nvg???

    • @nighthorus
      @nighthorus  3 роки тому

      LINDU OPTICS PVS 31
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html

  • @Deathloec
    @Deathloec 3 місяці тому

    aint no way it just drops right into the FMA model ? it has the glass and everything works ??

  • @glennroberts3069
    @glennroberts3069 Рік тому +1

    I don’t see it should be a parts breakdown and where to get the parts needed

  • @SykesFW
    @SykesFW Рік тому

    No tube purge?

  • @davidholloway1522
    @davidholloway1522 2 роки тому +1

    Where do you find the parts?

  • @Mr_Glenn
    @Mr_Glenn 11 місяців тому

    Gen 2.5? So are these 2200+ FOM Photonis Echo tubes?

  • @GlomorianPeacock
    @GlomorianPeacock 2 роки тому +1

    I'm curious where you got the clone housing? I have some Gen 2+ WP IITs that I'm trying to get a good solid housing for and CANNOT find some good ones for the life of me...

    • @nighthorus
      @nighthorus  2 роки тому +1

      I purchased a PVS-31 Clone made by LINDU on alibaba. There are other companies that make these things, so look them up on Alibaba.

  • @MonsterChuck
    @MonsterChuck 2 роки тому

    Do any home builders bother with nitrogen purge? I am curious how one would get that done or what is needed to setup the pump/vacuum for it.

    • @cdragen
      @cdragen 2 роки тому +1

      I can't remember where I saw it (90% sure it was a video here on YT) but I have heard of people using canned Argon to purge housings rather than Nitrogen. The theory is that since Argon is heavier than Nitrogen and Oxygen it naturally purges it out if you hold the housing so that the port is at the highest point. It's not perfect and there's no way to measure the pressure, but it should stabilize at close to standard pressure for your environment if you fill it slowly. The source that I watched said that they have used this method multiple times and never had an issue with fog or condensation.

    • @ZacharyCox
      @ZacharyCox 2 роки тому

      @@cdragen s2 underground video did that. With wine saver bottle

    • @heyarno
      @heyarno Рік тому

      One can just find a cavity inside to store a bit of desiccant.
      You can sow a custom bag to fit tiny corners.

    • @itsyaboo7834
      @itsyaboo7834 Рік тому

      U don’t need to purge it, its will eventually leak over time. The only thing you consider is collimate them if your building a dual

  • @andreyp.contreras9338
    @andreyp.contreras9338 2 роки тому +1

    Where I get that

  • @deadspeed6679
    @deadspeed6679 2 роки тому +1

    Can someone please drop a link to the items

    • @nighthorus
      @nighthorus  2 роки тому

      Alibaba LINDU PVS-31
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html?spm=a2700.9114905.0.0.5HslE1

  • @gilsondacostaqueirozqueiro7008
    @gilsondacostaqueirozqueiro7008 10 місяців тому

    Comprei um na aliexplex desse cor com lente azul e não funciona

  • @gordex2009
    @gordex2009 2 роки тому +1

    How much does this cost to build it myself?

  • @alexisvaldes955
    @alexisvaldes955 7 місяців тому

    is this like the Jerry 31s?

  • @Gunmonkey5
    @Gunmonkey5 3 роки тому +1

    Saying clone is a bit misleading I would probably say offbrand but I get what you’re saying. A lot of peeps will come for the purpose of making real working nods from airsoft accessory nods.

  • @campbellaviation7289
    @campbellaviation7289 2 роки тому +1

    wait how much did this cost

    • @nighthorus
      @nighthorus  2 роки тому +1

      About $6000

    • @campbellaviation7289
      @campbellaviation7289 2 роки тому +1

      @@nighthorus dang im broke i might just order like a 70 dollar night vision camera off amazon

    • @nighthorus
      @nighthorus  2 роки тому

      @@campbellaviation7289 oh god....

  • @Burnt-Milk27
    @Burnt-Milk27 3 роки тому +1

    Where can I buy the mx10160

    • @nighthorus
      @nighthorus  3 роки тому

      Agents in your country, Alibaba, or ebay.

  • @armondomazzucchi6233
    @armondomazzucchi6233 10 місяців тому

    What does gen 2.5 mean? How does it compare to gen 2 and 3

    • @aesthetic8780
      @aesthetic8780 9 місяців тому +2

      Never heard of gen2+? It has gen3 performance but the manufacturing process is different.

    • @armondomazzucchi6233
      @armondomazzucchi6233 9 місяців тому

      @aesthetic8780 asgood as gen 3?

  • @northerngear6814
    @northerngear6814 3 роки тому +1

    Where did you purchase the housing? I'm trying to do this.

    • @nighthorus
      @nighthorus  3 роки тому

      I bought the housing on AliExpress.
      LINDU OPTICS PVS 31 Housing.
      www.alibaba.com/product-detail/LINDU-OPTICS-PVS-31-housing-NVG_1600070474440.html
      Good luck👍

  • @jdontrevino-lp8pb
    @jdontrevino-lp8pb Рік тому +1

    Hay man if you know a website that builds nvgs for way cheaper than the actual thing and works the same I don’t want to build my own so if you know any website let me know

  • @l.t_tacleon7776
    @l.t_tacleon7776 3 роки тому +14

    This nods don't need batteries??
    It's very impressive!!!
    I want to make so stetic NVGs but are a lot of videos only with prototypes. Thanks a lot to make it real. Greetings from México

    • @nighthorus
      @nighthorus  3 роки тому +17

      The nod is need to CR123 battery.
      Absolutely nothing nod building videos....lol
      Probably the Nod building video of this model is the "first" video uploaded in the world.
      Thank you so much.

    • @totenfurwotan4478
      @totenfurwotan4478 2 роки тому +1

      @@nighthorus 31As take AAA batteries or 4 AAA in a cold weather battery pack

    • @woodwj987
      @woodwj987 Рік тому +3

      What pvs-31 clone is that and where did you get it?

    • @aesthetic8780
      @aesthetic8780 9 місяців тому

      ​@@woodwj987the standard clone from ali

  • @aldilahbudiman5268
    @aldilahbudiman5268 5 місяців тому

    Where can I buy the camera

  • @MylesDavid
    @MylesDavid 3 роки тому +4

    Nice build! 👍🏼
    How much did everything cost?

    • @nighthorus
      @nighthorus  3 роки тому +7

      Thank you👍
      The cost was about $6000.

    • @pek2602
      @pek2602 3 роки тому +7

      lmao

    • @Venom2U
      @Venom2U 3 роки тому +10

      @@pek2602 You may laugh but US issued PVS-31A's are +- $14,000 with so so tubes............

    • @eli.boxgaming-r682
      @eli.boxgaming-r682 3 роки тому +3

      @@nighthorus WHere did you find the housing? what company? Im thinking of building some with some gen 3 tubes

    • @nighthorus
      @nighthorus  3 роки тому +3

      @@eli.boxgaming-r682Lindu Optics PVS-31 m.alibaba.com/product/1600070474440/LINDU-OPTICS-PVS-31-housing-NVG.html
      Good luck.