4 Ways To Repair And Restore A Car Body | Cars Insider
Вставка
- Опубліковано 9 чер 2024
- Cleaning and restoring a vehicle can be performed in a variety of ways. From chemical dipping to dustless blasting, these satisfying techniques can bring delicate car parts and rusted metal back to life.
MORE CAR VIDEOS:
How The Filthiest Wheels Are Restored To A Mirror-Like Finish
• How The Filthiest Whee...
How A Filthy Tractor Cab Is Deep Cleaned
• How A Filthy Tractor C...
How to Rebuild A Wrecked Semitruck
• How to Rebuild A Wreck...
------------------------------------------------
#CarRepair #CarRestoration #CarsInsider
Cars Insider highlights the innovators and DIY masters who are changing the automotive world.
Subscribe to our channel and visit us at: read.bi/7XqUHI
Cars Insider on Snapchat: / 5218556092
Cars Insider on Facebook: insder.co/2OaJTkv
BI on Facebook: read.bi/2xOcEcj
BI on Twitter: read.bi/2xCnzGF
BI on Instagram: read.bi/2Q2D29T
4 Ways To Repair And Restore A Car Body | Cars Insider - Авто та транспорт
very straight forward and informative! liked and subscribed. wish you the best
I used a 1:5 ratio vinegar/water soak in a 50 gallon plastic drum to remove rust from all parts that would fit into the barrel. Way easier than sandblasting and no effort required. 5 to 7 days remove parts and lite scotch brite rust just falls off
Sandblasting with sand tends to harden the surface, like shot-peening but in miniature. Media blasting would be better but still hardens the surface: plastic, pulverized nut shells, dry ice. I used naval jelly on small parts. But I got impatient and couldn't wait a day or whatever. So I used steel wool to speed up the process.
SALUDOS AMIGO DESDE MÉXICO PUEDES AYUDARME DICIÉNDOME EL NOMBRE DE LOS QUÍMICOS A USAR
Warping in metal during a media blasting event is not caused by heat, it is caused by peening of the media. It doesn't matter if it's dry or wet blasting.
I’m glad someone already said it 👌🏻
The acid bath was so pleasing to watch😁
I've been told of issues after dipping; mainly stripping effluents coming out of trapped areas in the body and eating your expensive paint job.
He said in a much earlier vid that he takes special care to get those hollow spaces with the water blast. Probably need to let it dry in some eccentric direction before the repaint.
The real question is how much does this cost
I 👍 agree how much?
How much cost all money? And acid ? And pressure water ? Thanks
And cost to strip all paint and rust for one car
I agree 👍 how much?
In another video they said 2400 for full strip with the acid bath process
There's Larry from Ammo NYC