rc plane क्रैश नही होगा- nx4 evo Flight Controller Setting for Delta Wing
Вставка
- Опубліковано 11 лип 2024
- rc plane क्रैश नही होगा- nx4 evo Flight Controller Setting for Delta Wing #rcplane #flightcontroller
In todays video I will be showing you how to do the wiring for delta wing rc plane with nx4 evo flight controller/ gyro. This is the best cheap flight controller to begin with. Its available under rs2000 and just by following this video you can learn how to do its wiring with receiver and servo motors of rc plane. RC Planes will have a stable level flight if we install this flight controller in it.
Best for beginners who wants to use fc in their planes.
Subscribe for more.
Best of LUCK!
NX4 EVO: amzn.to/3s4rDyF
🔴 Follow me on Instagram - / automation_dude_
RC Plane Banane Ka Saara Saman: flyingmachines.in/?wpam_id=3
🔥5mm Depron ► flyingmachines.in/product/dep...
🔥3mm Depron ► flyingmachines.in/product/dep...
🔥Glue Gun:► flyingmachines.in/product/hot...
🔥Control Horn:►flyingmachines.in/product/con...
🔥Pushrod:► flyingmachines.in/product/pus...
🔥Pushrod Connector:► flyingmachines.in/product/2-1...
🔥Landing Gear+ Wheels:
► flyingmachines.in/product/sus...
► flyingmachines.in/product/foa...
🔥BLDC Motor:
► 2200KV: flyingmachines.in/product/a22...
► 1000KV: flyingmachines.in/product/a22...
► 1400KV: flyingmachines.in/product/a22...
🔥ESC:
► 40A: flyingmachines.in/product/40a...
► 30A Simonk: flyingmachines.in/product/esc...
🔥Propellers:
► 10inch: flyingmachines.in/product/104...
► 12inch: flyingmachines.in/product/124...
► 6inch: flyingmachines.in/product/gem...
► 7inch: flyingmachines.in/product/704...
► 8inch: flyingmachines.in/product/804...
🔥Batteries:
► 2200mah 3s: flyingmachines.in/product/eag...
► 1000mah 3s: flyingmachines.in/product/eag...
🔥Charger:
► 80W B6 V2 Charger: flyingmachines.in/product/htr...
🔥Building Materials:
► flyingmachines.in/product-cat...
--------------------------------------------------------------
Chapters:
00:00 - Introduction
00:26 - Receiver - Gyro Wiring
02:29 - Gyro - Servo Wiring
03:57 - Important Setting in Transmitter
04:40 - Flight Video
--------------------------------------------------------------
🔥My Recording Tools:
► amzn.in/gDE7tyL
► amzn.in/fiOhXZt
---------------------------//------------------------------
For Collaborations ► automationdudeofficial@gmail.com
-----------------------------------------------------------
how to install nx4 evo, best flight controller for rc planes, flight controller, rc airplane,3axis aircraft gyro, best rc plane flight cuntroller, rc plane best flight controller, which flight controller is best rc plane, fixed wing flight controller, remote controller airplane gyro, flight controller for rc planes, rc plane in india, rc plane pilot of india, automation dude
#flightcontroller
#rcplane #nx4 #flightcontrollersetting
#rcairplane
#AutomationDude
#automationdude
#AjinkyaDalvi - Наука та технологія
😅😅 mera problem to pahle hi solve ho gaya❤❤
Kisne kiya solve?
@@YumYouYesEyeSeeAutomation Dude group❤❤
Same here I asked
And he answered in q and a video
I am making an rc plane with 1.7 meter wing span using depron. Which adhesive should I use? I am considering ardalite.
Araldite and hot glue
Can u teach us how to make fov drone
Bhai dual edf su30 su35 ya mig35 bnaye koi.
Bhai sabse sasta 😂 receiver konsa he jo fsi6s transmitter me connect ho paye ??
Nice flight controller❤❤
Yes
Hello automation dude can you make video on how to find cg of rc plane
JUST REMEMBER THIS ! Homemade RC Plane - How to Make RC Aeroplane in Hindi | RC plane in India
ua-cam.com/video/g-KsatDKlnY/v-deo.html
You can use hobby king a3
Can this gyro works in flyskyi6 reciver b
Sir best wifi upa
What about e430 and e450 charger from skyrc how is it
Sir kya hum take off ke time flight controller on rakh sakte hai.? Crash nahi n hoga?😅
Plz answer
Sir iss flight controller ko Drone me use kr sakte hain kya? please reply
Nahi
Nx4 flight controller CT6B Transmitter ke sath connect ho sakega hai
haan hoga i guess
Which is the best lipo charger under 1500 which can give a good life for my battery or should i go for skyrc imax b6
I max is the best. Rest others won't keep your battery safe
Bhai mai es flight controller ko
FS-CT6B Use karsakthahoo kyaa
yes i guess
My f22 raptor caught fire due to overheating of esc
Jab Nx4 EVOvko hila jula Rahi hai to servo nahi chal rhi to kya kare plz solution ❤❤
V tail ka connect kese kare please help me
Could you tell me how to make rc plane with cardboard? Please
Process remains the same but your plane will be heavy
Can I can use flysky fs-i6s 10 channel transmitter and receiver for making rc plane ? Or it's only for making drones
better go with fsi6x
Sir sould I go with fs-t6
Can we check lipo voltage in transmitter
You need telemetry for that
Flying video chahia nx 4 wale plane ka
How to install NX4 EVO Gyro in RC Plane | Best Flight controller for RC Planes | rc plane
ua-cam.com/video/77SLQjjv0Q0/v-deo.html
Sir mera gyro delta wing mai kam nahi kar raha hai sirf aileron hi kam karta hai elevator kam nahi kar raha sab kar chuka lekin kuch kam nahi aa raha
FS-A6 does not support failsafe then why do you use it also can you tell me the range you get with it
I have 3 receivers.. this one, fsia6b and 10 channel.
I get a range good enough to fly in line of sight
And I don’t use failsafe because I fly safe
Like their are 90 degree servo motor, 180 degree , 360degree servo motor and even their is 180 degree ( 90 degree in each side) so which one should i use for elevon setting in f22
i use 100% of the throw. 90 degree on each side.. that you can adjust from dual rates
@@AutomationDude thanks
Hello automation dude if we make 3s li ion battery with 3 18650 cells , each cell c rating is 3 and its mah is 2500 ,then each cell give 7.5a continues, then we have to multiple 7.5a 3 times or multiple 7500mah with 9c . If we multiple 7.5a 3 times then we gate 22.5 amp continues and we multiple 7500mah with 9c rating when l we gate 67amp continues. which method is right. Rc plane can fly with this battery. I not have budget to buy lipo battery. The weight of this battery is 160 grams
Please reply
Can i add flaps with tis
ONLY if you use a 7-ch PWM receiver (minimum) and separate aileron servos fed from the "Aileron" and "AileronR" outputs on the Nx4EVO.
Main f117 plane bana raha hun. sare connection same to same kiya hai but nx4 evo kaam he nahi kar raha hai bas red light jal rahi hai. Please help me😢
Which one is best esc i should buy.... please help
go with ready to sky 40A
@@AutomationDude I just ordered Hobbywing Skywalker 40A, will it work fine.
My ESC was burnt while testing, I just want to know will it effect my flight controller and motor too, should I buy these items also....
@@AutomationDude l just ordered Hobbywing Skywalker 40A ESC, will it work..., And how much throttle I have to pull for take-off
How much degree (in each diection) servo motor should I use for eleven setting in f22
I didn’t understand
My 30amp ESC burned while testing my RC plane, will it be damege my other parts like flight controler, moter and evo nx4....please help me, i am using A2212 6T 2200kv moter with an 30 smp ESC, 5152 tri blade propler in my RC plane
Tell me battery specs you used
Orange 11.1v, 2200MaH, 30C, 3s Lipo battery
How to check remaining battery of lipo??
Can f22 raptor of 565 grams fly if the thrust is 900 grams
Offcourse.. that too with great speed
Thanks
I tested my 2200kv motor with 40amps esc 30c 11.1v lipo battery(1000mah)
And I got the thrust upto 900 grams but it is overheating what might be the reason and how can I make it proper
It will heat up.. don’t run full throttle more than 8 sec
OK thanks
Sorry it's elevon
Sorry mate, but your information at 1.54> is BS! For a Delta Wing you DO NOT need to add any wires from the "AileronR" port on the Nx4EVO to ANY port on your receiver, let alone to the "BAT" port. That should be only used for binding your receiver or adding a "spike buster" Electrolytic Capacitor to take care of any "brown out" tendencies when your servos are continuously moving under the control of the stabilizer and sucking too much current from the 5v BEC!
The ONLY time you would plug anything into the "AileronR" port on the stabilizer is when you are running 2 separate servos on a normal T-tail (or V-tail) plane. That is with NO y-cable connecting the aileron servos. For the 2 separate servos set-up you would need a receiver with a MINIMUM of 7-channels!
Also it is possible to mount the Nx4EVO in ANY of these 4 ways in your plane. 1 Arrow forward/right side up. 2 Arrow forward/upside down. 3 Arrow backwards/right side up. 4 Arrow backwards/upside down. (All flat mounted to base or roof of fuselage as near as possible to the Centre of Gravity.) You then adjust the A/E/R pots to get the gyro corrections going the right way and do the "Calibration" to get the correct Elevator response to the Emergency Mode.
Another point to watch is that you MUST cycle the power after making ANY changes to the Dip Switches for any settings to take permanent effect!
Bhai kya is plane ke hi video banata hai. Aur b kuch bana le