TC-125 Kit
Вставка
- Опубліковано 15 вер 2024
- The TC-125 kit is part of the SLAB system for porcelain slabs and large format tiles, and includes all the elements necessary for cutting, with the TC-125 circular saw, of these materials.
The kit includes:
- The circular cutter TC-125.
- 3 SLIM CUTTER guides of 110 cm, each. (For the proper functioning of the TC-125, it is NECESSARY, the use of these guides).
- 2 fixing suction cups for rough surfaces (RM). - 1 TCR-125 diamond disc for dry cutting (compatible with wet cutting) of porcelain stoneware (the TCR disc is not suitable for 45º cutting). - 2 clamps for additional fixing of the SLIM guide. - Tool set. - Practical textile bag for transporting the guides and rigid case for the TC-125 cutter.
The circular cutter TC-125 of RUBI, has a double system of reduction and control of the dust generated during cutting. Either, by means of its connection to a vacuum cleaner (dry cut) or, through the intake of water.
For more info: bit.ly/tc-125-k...
We are getting really deep chips, on a straight cut 10mm porcelain tile, can you advise?
We are using the saw wet.
We are cutting a few mm first cut and then in steps.
Really does not look good thanks
Sounds like you are using the wrong blade for the material you are cutting, or you are cutting too fast. What blade are you using and what kind of tile are you cutting?
Ruby is trash that’s user opinion
tanks rubi 😍😍
много мелких сколиков . обычно такое может быть изо не правильно подобранного диска под конкретный материал , погнутый диск, погнутая направляющая, песок ( мелкие осколки плитки) в пазах направляющей, вибрация или не устойчивость . нужно доводить 0.5-1 мм. и это не просто при такой длине плитки ведь нужно сохранить чёткую линию.
Благодарим за Ваш комментарий. Появление мелких сколов также возможно связано с качеством самой керамической плитки. Вы правильно отметили, что подбор диска под конкретный тип керамической плитки очень важен.
Соглашусь, в начале вибео видим диск-турбо, из за него и сколы, и обороты в 13000 не помогают
Which disk is the best to cut 45' with tc 125
Hello Aurimas. Are you asking about cutting a 45mm thick tile? What is the material of the tile?
@@RUBITools 45 degrees, 10mm thick porcelian, because a lot of rubi disk write that its not using for 45 derees
Ah, you meant 45 degrees. Ok. YES! We do have some discs that are adequate for 45 degree cuts and others that are not. We recommend you download the Club RUBI App. There is a disc selection tool on the app that is very easy to use. You input what kind of cut you need to make and the type of material you're cutting, as well as a few other bits of information, and in seconds you have a list of discs recommended based on your specific needs.
Puede cortar piedras de 22mm de espesor?
Si usas un disco de 125mm, sí. Con un disco de 125mm, puedes cortar hasta 25mm de espesor. Con un disco de 115mm, solo puedes cortar hasta 20mm de espesor.
Precio en Ecuador
Precio par Ecuador
Hola. Aquí tienes la información de contacto de nuestro distribuidor en Ecuador.
Centros Graiman: KiWy y Ferrisariato.
Tel. +593 99 891 6591 Andres
Tel. +593 99 437 6017 Moises
www.graiman.com
Rubi ct125 How much
What city and country are you writing us from?
How much money?
What city and country are you writing from?
@@RUBITools is it possible delivery to Croatia, Sinj, and the price with the table
I want to buy
Hi. What city and country are you writing us from?
Bonjour une question concernant les coupes à 45°, quel disque utiliser ? Car le disque fournit avec la machine (le TCR-125) ne convient pas (lu sur votre site "ne convient pas pour les coupes en biseau")
Merci
Il existe de nombreuses options pour les disques à onglet. Celui que vous devez utiliser dépend des matériaux que vous coupez. Vous pouvez voir vos options ici sur notre site Web : www.rubi.com/en/diamond-blades-s12
There are many options for diamond discs that can do mitre cuts. Which you choose depends on what materials you are going to cut.
@@RUBITools Merci pour votre réponse. Justement j'ai regardé sur le site et dans la section "coupe à l'eau" il n'existe aucun disque 115/125.
Dans la section à sec je vois plusieurs disques pour le carrelage type grès cérame comme les CSV Superpro, CPR, TCR qui pourraient convenir mais il est écrit "Non recommandé pour coupe en biseau"...
Quelle matière voulez-vous couper ?
Principalement du carrelage type grès cérame
Pouvez-vous nous donner vos coordonnées ? Avec votre adresse e-mail ou un numéro de téléphone, nous pouvons demander à un commercial de vous contacter. Nous devons également savoir dans quelle ville et dans quel pays vous habitez.
Can you give us some contact information? With your email address or phone number we can have a sales representative contact you. We would also need to know the city and country where you live.
хорошый обзор
Plz give me repaly
Hi. What city and country are you writing us from?
Prix
Hello. ¿From what city and country are you writing us from?
@@RUBITools From Algeria following your product
You can talk to our distributor in Algeria about prices www.alugamme.net/contacto
@@RUBITools s the manufacture in China or in Spain the same specifications
We have multiple factories in various parts of the world, including Spain, the USA, and China. But don't worry, we always make sure that the quality is exactly the same regardless of which factory you product comes from.
I bought 2 TC 125 rubi both of the broke in the first use. Rubi is a garbage machine I have seen in my 30 year of experience in this field
Hello Cesar. We are very surprised by your story because we tested this machine's durability extensively before putting it on the market, as we do with all our products. Can you tell us in a little more detail about what happened, how the machine broke, and how you were using it?