Buenas noches amigo: nuevamente muy lindo tu trabajo de restauración. Esos motores diesel japoneses son extremadamente duraderos y funcionan hasta con aceite de cocina... ji ji... Felicitaciones.
I just found your channel...Nice videos keep them coming! My advice is to do full restoration (including painting) so it will be a little longer and more interesting to see all this old equipment as good as new. Only one question; when you are lapping the valves you hit them while doing the lapping. Why do you do that? I know that lapping process is when you turn the valves firmly on their valve seats using lapping compound to achieve maximum valve sealing between the valve and the valve seat....
@リサイクルショップ 我楽多道 Hello im from Malaysia, i got old kubota engine almost identical to this engine, it still working, just got a little white smoke i want to rebuild engine myself, i got few question to ask. do i need to change main bearing,conrod bearing and new piston ring? do you change all that in this video? Do this engine got Timing mark guide before installing cylinder head to prevent valve hitting piston? sorry for my english
I have watched a few of your videos and I do like the content. I have to put the speed up as you do things too slow for me. When you undo or tighten nuts / bolts, you go too slow. Nobody works like that. For me it isn't natural. Great videos though. I would love to have a small one cylinder diesel engine.
Excellent like always, buy my dear friend, if you allow me I will make an advice a little suggestion for you, please take note is for your security, you must wear always hand gloves, you should avoid direct skin contact with bare hands with any petroleun destilleds.
This man is a true craftsman.
These videos are proof that one does not need a big work shop and expensive tools to do quality work.
Thank you :)
なんかこの人凄くない?
手の感じから若い人っぽいんだけど、自分が生まれる遥か昔のエンジンを直しちゃうとか驚き。
現代のエンジンとは違うノウハウがたくさん必要だと思うんだけど、事も無げに直してるし。
再塗装をしたりビカビカにレストアするんじゃなくて、年式相応の雰囲気を残したままってのも好感が持てる。
ありがとうございます!
We have KND 40 and still working. Love from Philippines😊
ほんと何時も感心して拝見させてもらってますが、
再生能力凄いです‼️
いえいえ、ありがとうございます(^^ゞ
音楽も、作業風景も、癒されます。
ありがとうございます!
Just found your channel. Love your vids! They’re kinda soothing to watch.
Thank you!
@@garakutadou 0 ku
Kubota yanmar... Especially kubota is known, among's Indonesian farmers
This diesel is beast.
Buenas noches amigo: nuevamente muy lindo tu trabajo de restauración. Esos motores diesel japoneses son extremadamente duraderos y funcionan hasta con aceite de cocina... ji ji... Felicitaciones.
Very nice video, beautiful Kubota. Congratulations.
Thank you :)
おめでとう、エンジン修理は完了です。
👌👍👏👏👏😊
ありがとうございます!
very good! love the old Diesels !
Thank you!
I just found your channel...Nice videos keep them coming! My advice is to do full restoration (including painting) so it will be a little longer and more interesting to see all this old equipment as good as new. Only one question; when you are lapping the valves you hit them while doing the lapping. Why do you do that? I know that lapping process is when you turn the valves firmly on their valve seats using lapping compound to achieve maximum valve sealing between the valve and the valve seat....
Thank you.
It keeps the compound from staying in the same place.
Excellent!
Thank you!
最近ハマってる。(修理する)シリーズ!丁寧な仕事で見習いたいです。
手がきれい。まだ若い方かな?
ありがとうございます!
弄ってるのは私の生まれるはるか昔に作られたものばかりですね(^^ゞ
the little lever on the valve cover must be for reducing the compression so to make starting easier?
Yes, eliminate compression :)
compression release.all manual start diesel engines have them.
VERY VERY GOOD!!!!
Thank you!
@リサイクルショップ 我楽多道
Hello im from Malaysia, i got old kubota engine almost identical to this engine, it still working, just got a little white smoke i want to rebuild engine myself, i got few question to ask.
do i need to change main bearing,conrod bearing and new piston ring? do you change all that in this video? Do this engine got Timing mark guide before installing cylinder head to prevent valve hitting piston? sorry for my english
Very good
Thank you!
what anime is this?
昔の発動機ってガスケットいらないのでしょうぁ?
Nice
Thank you!
Золотые руки!!!
Спасибо!
So how do I get one these old engines to USA?They are so cool!
Thank you :)
Look for engine shows wherever you're located, you'll find something. If you're in the states, you're more likely to find Briggs & Stratton engines.
di mna ade alat mesin kubota itu bos
撮影は光線の感じがよいのでよくわかる映像です。ただ、素人はまねできないかなあと思う。特に噴射ポンプの組み立てが難しそう。私は工具は大体そろっているので分解はできるが、組み立てになると、図と説明文が必要です。でも参考になりました。
ありがとうございます。
ポンプの扱いは小さなミスが大きな事故に繋がるので要注意ですね。
Amo este tipo de motores
Obrigado!
@@garakutadou gracias a tí
I have watched a few of your videos and I do like the content. I have to put the speed up as you do things too slow for me. When you undo or tighten nuts / bolts, you go too slow. Nobody works like that. For me it isn't natural. Great videos though. I would love to have a small one cylinder diesel engine.
Thank you :)
@@garakutadou I prefer the slow deliberate speed.
New friend from indonesia 👍👍👍
ピストンなんか洗った後は新品みたいですね。エンジンってちゃんとメンテをしてやれば長持ちするものなんでしょうか。
すいません、ひとつ質問です。修理されたエンジンはショップで販売されてるのですか。
ちゃんと扱っていれば十分長持ちですね。
特に単純な構造のエンジンは壊れる要素も少ないのでいつまでも動きますね。
販売することもありますが、動画になっているのは展示物が主ですね(^^ゞ
ONDE VOCE MORA
Horizontal cylinders diesel engine can't using in U.S.A.???
偶然見つけて依頼はまっています。発動機はどこから入手されるのでしょうか、私もレストアに挑戦したくなりました。
ありがとうございます!
私の場合、ネットオークションや同好の方から分けていただくことが多いですかね~
Di jual berapa harga?
Excellent like always, buy my dear friend, if you allow me I will make an advice a little suggestion for you, please take note is for your security, you must wear always hand gloves, you should avoid direct skin contact with bare hands with any petroleun destilleds.
Thank you.
👍👍👍
トップリングとサードリングの位置関係が違うような・・・
普通こういう場合トップ・セカンド・サードそれぞれ120°ずつずらすのがオーソドックスなやり方ですね。オイルリングとの関係もあるのでこうなったんですかね
ただ大雑把に合口を避けてるだけです(^_^;)
ですね。セオリーどおりだとスラスト方向と側圧方向に合い口を持ってこないですね。
Châp hang mơi cua tau luôn.
bác thợ giỏi quá
Cảm ơn bạn!
排気バルブ等に塗られている缶に入ったグリスの様な物はなんですか?
コンパウンドですね。
バルブ擦り合わせの真似事です(^^ゞ
バルブコンパウンド。普通はシートリングを切って、バルブのフェースも三段階の切り直し。面を出す為、すり合わせをする。した後光明丹であたり幅の確認をする。コンプレッション確保の為。
Ok
Dpijual nggapk mas
I need method repair er900 engine.pls send to youtube.
クボタのインジェクションポンプは分解したことないけど調速ガバナーの仕組みがいまいち分からん。もう少しポンプを見せてくださればいいですが
ボッシュタイプなのでラックピニオンによる制御ですね。
タンクは人カなんですね(笑
無心でシャカシャカです!
Good but no paint? Better with body paint..
Help pump oil not good
👍🏻🇪🇨
Gear timing injin.⁰
Pelamordedeus macho, limpe essa tampa aí. Passe um pano com querosene.
Ex tempe
Hi❤👍🇰🇭😢