First proper idling of krolla. The k24 corolla on Speeduino.
Вставка
- Опубліковано 26 сер 2024
- Finally the car idles. Just playing with the fuel map.
Skip to 12:15 for tunerstudio view.
#k24a #k24a2 #k20a #k20a2 #corolla #honda #kswap #speeduino #standalone #tuning #vtec #vtecsociety #vtechvideos #toyota #ae86 #ae85
Use PW adder not multiplier, and use less TPS threshold values as much as possible (till you start getting noise then back off a few percent).
I was just playing with the interface. Checking in different settings to see what engine likes. Now engine responds quite well with PW multiplier. Will try out adder as well. Threshold will be tuned on road or dyno.
Salam o Alikum, Ma Sha Allah, excellent work, In Sha Allah on road it will perform like a racing car 👍
Wailaikum Assalam, Insha ALLAH thanks alot.
Im also doing 96 corolla k24 swap any tips will help
First you need to get rid of engine crossmember, center the engine right to have equal axles. So you can use Ek civic kswap axles. Rest just take care of transmission and steering rack distance.
Please upload you setup to use in mi swap, thanks
Follow this thread. www.pakwheels.com/forums/t/k24-swap-corolla-running-an-open-source-standalone/3008357
So did you modified the trigger wheel or where you able to run it without modifying it how dod you het the vtc to work do you have a base map ypu can send me and a wireing diagram......sorry for all the questions i have an rsx base i want to run as a piggy back ive had the ecu for over a year and have done nothing with it please help as i am new to the fuel injection world
Yes it's been modified in both cars. Vtc works but i still need to work on PID to put it in close loop. Which pcb you got? and You are from?
We have a base map and can make one according to the setup. Also remote tune your car as well. Along with the wiring guide.
@@engineeringapplied-e80The PCB is a vo.4.3c will it work for what I'm doing
@@charlestorruella8591 I also have 0.4.3c. But i also added another pcb to increase input/outputs. But 0.4.3c can work fine. You might like to check the runs of that civic, last video we shared. Car is not dyno tune yet!. Have a stock 4.3 final drive transmission and still got some good hp left to pull out.
@@engineeringapplied-e80my idea is to put together a frankenk with a2 cams on a3 head VTech locked and a2 pistons which are higher compression and a prb intake all stock parts from junkyard right now it's am auto so I want to run it piggyback once I get it tuned I'm going to manual swap it but can't unless I get a manual ecu which is why I want to use speeduino this way so I don't need 1200 bucks for kpro they say it's 795 but that's with out installation on your ecu I've been thinking of this for a year and ready to do something
does it still have vtec though?
Yes, both vtec and vtc.
@@engineeringapplied-e80how did you get the vtc working I thought speeduino didn't support vtc
@@charlestorruella8591 it does in negative trigger pattern.
@@engineeringapplied-e80 I'm working on a k24a4 swap for a 68 VW beetle and I want to use a speeduino as a standalone ecu but I'm not sure how to get vtc working with speeduino. From what I understand, the K24a4 has vtc only on the intake cam, how exactly did you get the vtc working? I am new to this sort of stuff so I'm learning as I go along. Any help is appreciated, thanks!
@@natedog93612 Yes K24 has vtc only on Intake cam. You can use vtc inclose loop in minus trigger pattern.