I was stumped because (for fear of doing it wrong) I didn’t know the all-blue power wire on the aftermarket harness connects to the blue and white wire on the adapter. Your video helped me a lot. Thank you!!!
Yeah they are all color matched in your video. But, I need A video for same exact aftermarket radio to my 2005 Chevy Silver LT 1500 for my Bowes bypass 150 dollar harness. It's got alot of extra wires on it comeing free m the green door charm box.
I have a 2008 Toyota hiace. Can you please tell me what wire connector I need to connect the radio to my vehicle factory harness. I don’t want to cut my factory harness wire to connect it to the harness that that my new android radio comes with., I just want to plug an play 😢
I have one question I have a blue remote wire coming from my amp which wire on the back of the harness should I connect that to to turn it on when the car start up ( the power antenna or splice it into the red wire ? ) thanks
Wiring harness that goes between car and after market head unit harness has two blue wires, one solid and one with white stripe (amp turn on and antenna wires), while the head unit (after market stereo)harness only has one solid blue wire that the book labels for amp turn on. My question is: can I just connect all three blues, the solid on the head to both the solid and striped on the harness? Or just cap one off? Don’t have an amp and don’t think it’s a power antenna but not 100% sure.
@rachelray3250 If you have an Amp them the blue/white must be connected to your Amp on of the radio. For now they can all be connected together if you do not have an Amp. It will still work
@eazidiy I know rca gotta connect from sterio to amp but I'm talking about my 4 door speakers to my amp ? How do my 4 door speakers connect to my 4 channel amp ?
@thomassaballa do you have a factory Amp or aftermarket? I think you must use line output converter for an aftermarket amp. I recommend you seek professional assistance to install.
For your amp you either run new wires from your amp to each door speaker or use a 9 wire contuctor or "speedwire" and you can connect at your speaker wiring harness to each designated speaker location there will also be a remote wire..with the blue remote wire in the 9 wire and run it out the back of dash into your amp. No need for a L.O.C "Line Output Converter"
Hi I have a problem when I plug my radio in it blows the fuse and idk why. It’s the same radio as you but on my harness it doesn’t have a solid blue wire. Just a striped one. But when I plug my factory radio in it works
Hello my friend! I'm having a problem with my VW POLO 1.2 2008. When I turn off the car the screen stays on and I manually turn it off.. Ok but my phone keeps connecting to carplay via bluetooth... I suppose that even if the radio is "off" it continues to drain my battery. I don't know much about it but I know that behind the radio there are several connections with different colored cables. Is there a cable that I should cut?
Your radio needs both wires but the 12v constant is a yellow wire and 12v ACC is a red wire. 12 ACC allow your radio to come on only wire the key is turned to ACC. If you interchanged the wires, your radio will stay on and drain your battery.
I have a 2007 jeep grand cherokee with a separate factory amp in the back. I've been told I need to splice the blue wire with the accessory. I've done this and still no sound, the blue wire acts as a constant for some reason even though its labeled antena/amp turn on. Any suggestions?
Do you have an Android radio or a 2DIN radio? You may need to buy special harness or canbus for an Android radioto work. For a 2DIN radio, you need to take the speaker feeds from the RCA ports of the radio. Which means you must have an harness thar can support that.
Hello, I have a strange problem, so to speak, when I turn on the ignition on the red wire which I assume is from the ignition switch I have 12V, as is normal, but when I turn on the ignition I have 8V, can someone help me???
The issue can be cause by battery, the ACC wire or fuse. Use a multimeter to check the voltage at the battery, at the fuse box, and at the ACC wire itself to identify where the voltage drop is occurring.
i have a 2007 lexus gs450h with no compatible stereos, could i install a small kenwood stereo into my glove box like this and run a amp to it ? and if so, could you find me a wire connector ??
Unfortunately, I was unable to find a compatible harness. It is difficult for me because I don't drive the drive the car. I suggest you keep searching online.
My backup camera had a red piggy wire and RCA plug which go to the back of the head unit. It said has go to trigger or reverse wire. In this video, seem like you don't has it, where does it can hook up to ? Thanks you.
Wondering if I can connect my remote wire from aftermarket amp to the solid blue wire coming from my stereo harness, it’s the only blue color, I don’t have blue with a white stripe
Hi, your video helped clarify the basics, but could you tell me what harness and stuff I’d need. I have a Kenwood KDC-BT370U, and an 06 Subaru Legacy. I’d really appreciate it
Hi, I encourage you to determine what the color wires of your radio harness means. 12 ACC and 12 V constant are needed for the radio to power up. However, the 12 ACC which is usually the red wire prevents the radio being powered up without the key ignition turned on. From your description, it seems the 12 ACC and 12 V constant have been mismatched. Try swapping the wires and check.
PLEASE HELP. I have a 07 civic si, I ordered a Boss BE7ACP. The wire harness connector that powers the after market unit is a 20 pin. My factory head unit is a 16 pin. Can I still use a 16 pin atenna jack and the other 16 pin wire harness connector that comes with it? Or can I only use a 20 pin
@@eazidiy I finished installation today, thank you! Everything was perfect and works great, first try. Was overthinking and thought the 20 pin wouldn’t work lol
Thank you for your positive feedback and experience. I'm glad you are able to complete the installation. In the video, I used a 16 pin to 24 pin harness. The concept is to understand the wire color codes. Cheers 🍻
Hi there. So I don't have blue wire coming from my car for ant turn on wire thats comming from radio. Where do I need to put blue antenna wire comming from my radio. I have aftermarket antenna.
Which wire does the black wire connect to? I have a problem with my stereo not turning on and IVE seen my black wire disconnected I just don’t know where it it supposed to be connected to
I have a question I just hooked up an aftermarket radio on a 2009 Chevy HHR I connected all the wires yellow to yellow but on my harness it comes with a separate red wire I connected that to the ignition switch fuse but it's draining my battery What could be the issue??
Red wire should be for 12V ACC. Only Yellow wire to 12V battery. If you connect the red wire to your battery directly, it mean your radio will be on at all time.
Hey my radio says i cant do stuff while im moving,even though im not moving. It may be because its a old manual. Do you have any way to get around this?
@chaneli4855 You can read more about Amp here blog.rockfordfosgate.com/car-audio/car-amplifiers/what-does-a-car-amplifier-do/#:~:text=Amplifiers%20work%20to%20enhance%20sound,noise%20and%20other%20competing%20sounds.
The purple +12v reserve cam is the trigger for the radio to go into reverse camera mode. The purple should be connected to the positive wire your reverse light in your trunk.
@GabrielHernandez-sf4lx how was the connections made? Direct connections or you used connectors for the harness. My suspension is loose connections on the harness.
Nice Video friend, I am trying to use a factory car stereo at home, it works well. But the issue is when power with ATX Power Supply as usual, it goes into 1 hour mode automatically. Any way to overcome this problem.
Are you sure the output voltage is up to 12V? Connect yellow wire (12v constant) and red wire (12v ACC) to the positive of the ATX. Then Connect black wire ( ground) to the negative of ATX
@@eazidiy Yes I checked it is 12V no problem with that. Other than that is there any other way the car stereo can detect the ignition status of the car.
Red wire is 12V ACC. You should only have 12v when the car is turned otherwise there will be no 12v when the car is off. Yellow wire is the 12v constant ( +12v at all time as long as you have battery in the car)
On my 2010 chevy cobalt diagram I only see positive and ground. I put the yellow with positive, black with black and put all the colors for speaks. I had removed the original connectors because my friend told me to, I shouldn't have done that and just get a harness. Now it won't turn on when I turn on the vehicle at all. Do I need to put the red wire with the yellow together onto the positive wire? Idk what to do. Please help.
Red wire is 12V ACC. Prevents your radio constantly turned on and drain your battery. Please check your radio wiring diagram to determine which wire is for the 12 V ACC.
So on some older cars the radio is t designed with a memory circuit. Mine wasn't so I had to run a wire in to allow it to have a trickle of power to save presets while the car is off. A way to figure out which wire is your accessory wire and your battery wire is to take a multimeter to the wire and to your ground. if it shows 12 volts until you turn the car off it's your accessory. If it keeps showing 12 volts after the car is off it's your battery wire.
There isn't a single video on the internet which is pretty pathetic it's 2024 and there's not a single video to show that actually shows instead of being fake how to wire a Bluetooth radio with a regular solid color wire adapter to a factory wire harness that is striped colored I don't have a single solid color wire that are not the same color red goes to yellow and green black goes to white and purple like what the fuc
@@eazidiy yeah I just gave up the radio that came with the car factory radio just stopped working so I tried to put my own in almost got shocked a few times blew some fuses replace the fuses but I'm going to stop
@@eazidiy I just think it's BS how they make everything so hard why do they have to use wires with several different colors why can't they just use solid colors on wires so it would actually be possible to color match it's impossible to color match a solid color with a wire that is two colors that makes no sense they don't match
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I was stumped because (for fear of doing it wrong) I didn’t know the all-blue power wire on the aftermarket harness connects to the blue and white wire on the adapter. Your video helped me a lot. Thank you!!!
I am glad you gave up the fear and it worked for you. Appreciate your positive feedback ✨️
How can I get my factory DVD player to play my videos with the aftermarket stereo?
@sheldonwillis5807 impossible! You need to purchase android radio with DVD player.
I had the same issue! You gentleman saved the day.
Yeah they are all color matched in your video. But, I need A video for same exact aftermarket radio to my 2005 Chevy Silver LT 1500 for my Bowes bypass 150 dollar harness. It's got alot of extra wires on it comeing free m the green door charm box.
Could you send me a picture of your harnesses ( both radio and side into the car) eazidiy@gmail.com. Let me take a look.
I have a 2008 Toyota hiace. Can you please tell me what wire connector I need to connect the radio to my vehicle factory harness. I don’t want to cut my factory harness wire to connect it to the harness that that my new android radio comes with., I just want to plug an play 😢
This should work for you amzn.to/3hgSwdS
@@eazidiyIs there one you can find for a 2005 toyota camry that’s does a similar job?
The harness will work for 2005 Toyota Camry with no factory amplifier
@@eazidiy Ok, this car is has the JBL as well will that change anything?
You need another harness for a JBL toyota. The first one won't work. Let do some research for you
I have one question I have a blue remote wire coming from my amp which wire on the back of the harness should I connect that to to turn it on when the car start up ( the power antenna or splice it into the red wire ? ) thanks
Splice it into red wire 12v ACC
Wiring harness that goes between car and after market head unit harness has two blue wires, one solid and one with white stripe (amp turn on and antenna wires), while the head unit (after market stereo)harness only has one solid blue wire that the book labels for amp turn on. My question is: can I just connect all three blues, the solid on the head to both the solid and striped on the harness? Or just cap one off? Don’t have an amp and don’t think it’s a power antenna but not 100% sure.
As long as you car do not have Amp, you may cap off the blue/white wire. Connect just the solid blue wires
@@eazidiy what would happen if I did connect all three if I did get an amp. Can you do that?
@rachelray3250 If you have an Amp them the blue/white must be connected to your Amp on of the radio. For now they can all be connected together if you do not have an Amp. It will still work
Love the video. I see youve recommended harnesses for people. Coukd you recommended what id be looking for, for my 06 scion xb?
See this Amazon link amzn.to/3W45E7Z
Do we need to connect the blue wires together?
You could connect them together.
Thank you ..Question.. If i wanna install a 4 channel amp ..Do i use the speaker wires from the sterio harness and then run it to the 4 channel amp ?
For amp connection, use the RCA wires.
@eazidiy I know rca gotta connect from sterio to amp but I'm talking about my 4 door speakers to my amp ? How do my 4 door speakers connect to my 4 channel amp ?
@thomassaballa do you have a factory Amp or aftermarket? I think you must use line output converter for an aftermarket amp. I recommend you seek professional assistance to install.
For your amp you either run new wires from your amp to each door speaker or use a 9 wire contuctor or "speedwire" and you can connect at your speaker wiring harness to each designated speaker location there will also be a remote wire..with the blue remote wire in the 9 wire and run it out the back of dash into your amp. No need for a L.O.C "Line Output Converter"
@JJBigDadd86 Thanks I just ran my door speakers from my amp to my sterio harness on the dash ..much easier
Do you know what wire harness i need for a 2005 chevy Silverado with steering wheel buttons
Unfortunately, I don't know anything about Chevy Silverado.
Hi I have a problem when I plug my radio in it blows the fuse and idk why. It’s the same radio as you but on my harness it doesn’t have a solid blue wire. Just a striped one. But when I plug my factory radio in it works
Nvm we don’t have the same radio. And my radio doesn’t show which wire is which
I hope you are able to get the radio manual and check the wiring harness label
Did you connect the brown wire onto the ground wires.
What does it do
The brown wire is the brake wire and it should be grounded. It may prevent you from using the video functions of the radio while driving.
@eazidiy thank you.
Hello my friend!
I'm having a problem with my VW POLO 1.2 2008.
When I turn off the car the screen stays on and I manually turn it off.. Ok
but my phone keeps connecting to carplay via bluetooth... I suppose that even if the radio is "off" it continues to drain my battery.
I don't know much about it but I know that behind the radio there are several connections with different colored cables.
Is there a cable that I should cut?
First is the radio harness a factory made with the harness or did you make the connection with aftermarket?
It sounds like the 12V constant wire is connected with 12 V ACC which keeps the radio on all times and drain your battery.
@@eazidiy And what i need to do? Remove the 12 V Constant or 12 V ACC?
@deshiris you did not answer my question?
Your radio needs both wires but the 12v constant is a yellow wire and 12v ACC is a red wire. 12 ACC allow your radio to come on only wire the key is turned to ACC. If you interchanged the wires, your radio will stay on and drain your battery.
What about the OEM tweeters what colors are those
Your car must have an Amplifier? The wiring harness in the video is for a non-amp radios
Brotha, that is some banging music!
Appreciate you bro! Aftobeat popping 🎶
Hey do you have a link for where you got your connectors from
Is it the connector into the radio or the one into the car? Depending on your radio and car make, the harnesses are different.
@ I ment the connectors for connecting the wires together
Ok. You may use this link to purchase amzn.to/49A69eD
hey bro was wondering if u could help me with finding the right harnesses for my 2011 kia forte ex. any help would be appreciated!
www.amazon.com/dp/B0B5WFPVQC/ref=cm_sw_r_as_gl_apa_gl_i_QSY2587R2JBGAVW28GNZ?linkCode=ml2&tag=eazidiy-20
Hi there, I have problem installing after market to a polo vivo, none of the colors are there. There's 2 red&yellow wire and some brown
Check the radio manual for what each wire represents.
I have a 2007 jeep grand cherokee with a separate factory amp in the back. I've been told I need to splice the blue wire with the accessory. I've done this and still no sound, the blue wire acts as a constant for some reason even though its labeled antena/amp turn on. Any suggestions?
Yes, splicing the blue amp on wire to 12v ACC can turn on the amp. You must also consider how the amp speakers are grounded.
Do you have an Android radio or a 2DIN radio? You may need to buy special harness or canbus for an Android radioto work. For a 2DIN radio, you need to take the speaker feeds from the RCA ports of the radio. Which means you must have an harness thar can support that.
Hello, I have a strange problem, so to speak, when I turn on the ignition on the red wire which I assume is from the ignition switch I have 12V, as is normal, but when I turn on the ignition I have 8V, can someone help me???
The issue can be cause by battery, the ACC wire or fuse. Use a multimeter to check the voltage at the battery, at the fuse box, and at the ACC wire itself to identify where the voltage drop is occurring.
i have a 2007 lexus gs450h with no compatible stereos, could i install a small kenwood stereo into my glove box like this and run a amp to it ? and if so, could you find me a wire connector ??
Unfortunately, I was unable to find a compatible harness. It is difficult for me because I don't drive the drive the car. I suggest you keep searching online.
My backup camera had a red piggy wire and RCA plug which go to the back of the head unit. It said has go to trigger or reverse wire. In this video, seem like you don't has it, where does it can hook up to ? Thanks you.
The radio harness has a reverse wire trigger. It is different color wire.
The radio harness has a reverse wire trigger. It is different color wire.
Wondering if I can connect my remote wire from aftermarket amp to the solid blue wire coming from my stereo harness, it’s the only blue color, I don’t have blue with a white stripe
Yes, you can.
What if our old radio sietes that where connected don’t have two white wires ?
Do not understand your question. However, the 2 white wires, solid white is positive and white/black is negative
Where do i put in the extra brown wire ? I think its a mute wire but idk where to put it
You may leave it without connection if it is not required by your radio harness.
Hi, your video helped clarify the basics, but could you tell me what harness and stuff I’d need. I have a Kenwood KDC-BT370U, and an 06 Subaru Legacy. I’d really appreciate it
You have to search online for the appropriate harness for your car model. I don't have Sabaru, unfortunately I cannot help.
Hey man I need some help I have a 1998 gmc sierra and do I connect the wires to the same color or different colors
Match the wire colors
I have a Dmx4707s what is the harness i need to get to fit my car i have a 06 honda accord i currently have a pioneer stereo
amzn.to/3WURoyy
@@eazidiy which one goes ln the back of the kenwood ?
What about a harness for a 2006 Honda pilot
amzn.to/3XeK4wA
How do you take these caps off?
Which caps???
Wiring my nephews 2009 Jetta matched all colors but once yellow is connected radio comes on without car being on. What should I do?
Hi, I encourage you to determine what the color wires of your radio harness means. 12 ACC and 12 V constant are needed for the radio to power up. However, the 12 ACC which is usually the red wire prevents the radio being powered up without the key ignition turned on. From your description, it seems the 12 ACC and 12 V constant have been mismatched. Try swapping the wires and check.
I’ll try it a let you know
I need the harness if is the 26 pines can you put the link so I can buy it from your store?
Unfortunately, I do not have the harness available. Thank you
PLEASE HELP. I have a 07 civic si, I ordered a Boss BE7ACP. The wire harness connector that powers the after market unit is a 20 pin. My factory head unit is a 16 pin. Can I still use a 16 pin atenna jack and the other 16 pin wire harness connector that comes with it? Or can I only use a 20 pin
You may use them. Match the wires color by color
@@eazidiy I finished installation today, thank you! Everything was perfect and works great, first try. Was overthinking and thought the 20 pin wouldn’t work lol
Thank you for your positive feedback and experience. I'm glad you are able to complete the installation. In the video, I used a 16 pin to 24 pin harness. The concept is to understand the wire color codes. Cheers 🍻
I have a SJOY stereo. Will this setup work with a 2005 highlander with the JBL amp?
No. It won't work. Check out this video that should help you ua-cam.com/video/SuNPs0zBMwE/v-deo.html
What's all harnesses part numbers?
Check the video description box
@@eazidiy One set is 70-1761. I know about that. The second connector comes with radio I've figured it by now.
That should come with the radio. Otherwise, you may need to search on the internet. I don't know that part number.
Hi, what's the cable with the white plug called?
I need one of those.
Thanks in advance
Wiring harness
Thanks for your fast reply, I'm trying to find the exact same one (female) but I only run into the opposite one (male)...no luck
The female is hard to find
Wiring harness
Hi there. So I don't have blue wire coming from my car for ant turn on wire thats comming from radio. Where do I need to put blue antenna wire comming from my radio. I have aftermarket antenna.
Do you have blue/white wire? If not, you can use red wire 12V ACC to turn on your antenna.
I do not have blue/white. I'll try to connect it like you said. Thanks for quick response
Will this work for a 2008 scion xb?
Get the correct harness for your car and color match the wires. It will work as long as your car do not have a factory Amplifier
What about the extra red wire i got for my harness? The radio won’t turn on and i feel that it has something to do with that
The red wire is tour 12V ACC. It must be connected.
Thank you
@BeeRockk you are welcome
I have polo vivo 9n 2014 could you pls tell how to connect
Unfortunately I do not have the wiring diagram for your specific car. Simply color match the wires, I hope it will be helpful.
Which wire does the black wire connect to? I have a problem with my stereo not turning on and IVE seen my black wire disconnected I just don’t know where it it supposed to be connected to
Black wire must be connected to the ground wire of your harness.
Same with mines I connected both black ground and still not working
For any radio to turn on, it requires constant 12v (yellow wire), 12v ACC ( red wire) and the ground chasis ( black wire).
If your connection is right and still no power, check the radio's fuse.
@@eazidiy ima see tomorrow the black i didn't connect to the harness as it said Subaru only
I have a question I just hooked up an aftermarket radio on a 2009 Chevy HHR I connected all the wires yellow to yellow but on my harness it comes with a separate red wire I connected that to the ignition switch fuse but it's draining my battery What could be the issue??
Red wire should be for 12V ACC. Only Yellow wire to 12V battery. If you connect the red wire to your battery directly, it mean your radio will be on at all time.
@@eazidiyso how do you do that because I don’t really understand what you mean
Hey my radio says i cant do stuff while im moving,even though im not moving. It may be because its a old manual. Do you have any way to get around this?
Your radio harness has a brake wire. The brake wire must be grounded.
It says parking brake on the harness diagram, would that be the same thing?
@@eazidiy and how do you recommend I ground that wire?
@@eazidiy the only reason I ask is because it's a very short cable
Yes
I have a blue dvr-Ir cable, what is that for and what do i connect it to?
DVR is Digital Video Recorder, IR is Infrared. The cable you mention sounds like it is meant for video or camera.
I found my blue a white wire cut..in the other video I watched his was cut too..why
Blue/white wire is for Amplifier. It is not needed if you do not have an Amp.
Okay thanks...what exactly is the amplifier
@chaneli4855 You can read more about Amp here blog.rockfordfosgate.com/car-audio/car-amplifiers/what-does-a-car-amplifier-do/#:~:text=Amplifiers%20work%20to%20enhance%20sound,noise%20and%20other%20competing%20sounds.
Can I connect the purple 12+ reverse cam wore on with the red 12+ wire? Thanks so much. Asome videos
The purple +12v reserve cam is the trigger for the radio to go into reverse camera mode. The purple should be connected to the positive wire your reverse light in your trunk.
@@eazidiy will it work if I connect the power wire in the trunk to the back up light ?
Yes, power wire to reserve light positive wire in the trunk and the other end of the power wire Connects to the purple wire of your radio harness.
@@eazidiy awesome thanks
You are welcome
i have a 2004 mustang screen turns on everything works but once i close my door or i start driving screen turns off
what do you think the issue could be
I suspect the wires are not properly terminated. Is the radio harness joined together, or is it is factory fitted?
@ i’m using an after market harness from auto zone
@GabrielHernandez-sf4lx how was the connections made? Direct connections or you used connectors for the harness. My suspension is loose connections on the harness.
@ i used connectors at the harness
Whats the pink wire for
Depending on your radio it could mean a different function. It was for the reverse camera trigger in the radio I used.
@@eazidiyhow is this one connected? What do i connect it to
i dont have a red wire on the car.so where does the red wire go.
Check your car radio wiring diagram, look for your 12V ACC wire. Maybe it is a different wire color.
I got same radionwith my car but damn thing not powering on.
Are the wires properly terminated? Check the radio's fuse if it not blown out
Can i ask do you know what power harness for a 2005 mercury sable LS
Please check online. Amazon, Ebay etc.
@eazidiy ended up buying the metra 99-5719 headkit it wasnt cheap but it actually made my ac run correctly somehow 💯💯
When I go to the explore it says nulldisk what is that????
I am sorry I don't understand your question. Could you please retype your question?
Nice Video friend, I am trying to use a factory car stereo at home, it works well. But the issue is when power with ATX Power Supply as usual, it goes into 1 hour mode automatically. Any way to overcome this problem.
Also I think the car stereo isn't detecting ignition status.
Let me understand you. Are you using an external 12v power supply to power the radio?
@@eazidiy Yes an old computer power supply
Are you sure the output voltage is up to 12V? Connect yellow wire (12v constant) and red wire (12v ACC) to the positive of the ATX. Then Connect black wire ( ground) to the negative of ATX
@@eazidiy Yes I checked it is 12V no problem with that. Other than that is there any other way the car stereo can detect the ignition status of the car.
What if no power on red from car? Run a new wire?
Red wire is 12V ACC. You should only have 12v when the car is turned otherwise there will be no 12v when the car is off. Yellow wire is the 12v constant ( +12v at all time as long as you have battery in the car)
On my 2010 chevy cobalt diagram I only see positive and ground. I put the yellow with positive, black with black and put all the colors for speaks. I had removed the original connectors because my friend told me to, I shouldn't have done that and just get a harness. Now it won't turn on when I turn on the vehicle at all. Do I need to put the red wire with the yellow together onto the positive wire? Idk what to do. Please help.
Yes, put the red and yellow wires together on the positive wire.
What if my harness has two yellow wires then what?
Yellow constant 12v is with the main power harness, you can tell by the size of the wire.
Thanks so much men
You are welcome 😊
13 dodge grand caravan?
amzn.to/46mkkTc
what about a black and yellow wire ?
Depending or your car and the wiring harness, it must be an accessory wire.
My radio is old 02 so I don't have red lol
Red wire is 12V ACC. Prevents your radio constantly turned on and drain your battery. Please check your radio wiring diagram to determine which wire is for the 12 V ACC.
So on some older cars the radio is t designed with a memory circuit. Mine wasn't so I had to run a wire in to allow it to have a trickle of power to save presets while the car is off. A way to figure out which wire is your accessory wire and your battery wire is to take a multimeter to the wire and to your ground. if it shows 12 volts until you turn the car off it's your accessory. If it keeps showing 12 volts after the car is off it's your battery wire.
i wish you would’ve told me i needed the blue things when i asked you if i needed anything else
What blue thing? Are you referring cable connectors? If yes, you could connector cables without butt connectors. You can slice cable directly
Slice and joint the wires together and an electrical tape to wrap up.
There isn't a single video on the internet which is pretty pathetic it's 2024 and there's not a single video to show that actually shows instead of being fake how to wire a Bluetooth radio with a regular solid color wire adapter to a factory wire harness that is striped colored I don't have a single solid color wire that are not the same color red goes to yellow and green black goes to white and purple like what the fuc
I ask you to look for your specific car's wiring diagram and study it. Seek professional assistance if you need one.
@@eazidiy yeah I just gave up the radio that came with the car factory radio just stopped working so I tried to put my own in almost got shocked a few times blew some fuses replace the fuses but I'm going to stop
@@eazidiy I just think it's BS how they make everything so hard why do they have to use wires with several different colors why can't they just use solid colors on wires so it would actually be possible to color match it's impossible to color match a solid color with a wire that is two colors that makes no sense they don't match
Hello everyone, I have a question if any of you followers know someone who can unlock the radio eclipse fujitsu CD8053
Reachout to seller or manufacturer of the radio