Hello Sir, thanks for the tutorial. In the "Virtuoso Layout XL Editing" Window, I can select and move transistors, as needed. But", I face challenges with electrical connections, specifically wires, as I am unable to select or edit them. I would appreciate guidance on how to solve this problem.
Hello Sir I am a 4th yr ECE Student. I am familiar with the Layout designing of basic gates in Cadence Virtuoso using 90nm and 180 nm tech nodes with DRC and LVS. I am looking for guidance from an experienced person related to this field. Thank You
Hello sir, can you guide me I am interested in the analogue layout part and I want to learn analogue layout analysis from scratch so can you guide me from where we start to learn
Hello, Hafeez KT , I want to learn VLSI physical and lay-out design using Cadence Encounter and Cadence Virtuoso. But, I think Cadence Tools are not affordable by me alone. Again, I don't have an opportunity to join a training institute soon. I am being frustrated....can you suggest me an alternative affordable way to learn it.
I have a virtuoso cadence version vIC6.1.4, but I don't have PDK environment (Ex: UMC_18_CMOS cell library) to design, so could you help me to find some PDKs? I appreciate that.
hi Hafeez KT Assura menu is missing from my layout window. please you can help me ? my configuration is : - ubuntu 14. - cadence 615.5. - technologie 0.18 µm thank you in advance
Can you give me the download link of the libraries? Actuator I need UMC_18_CMOS library. It will be helpful for me if you give the direct download link of the library.
Thanks a lot. This is the best cadence tutorial I have came across.
Excellent and very helpful for me,as I'm doing master's I'm referring your videos,so helpful,thanks for your content
This is what I need. Been searching for ages
awesome way of teaching,nice video
thanks for sharing knowledge.
please keep it up.
Great tutorial! Appreciate it.
great video!!!
Very usefull sir..
Thanks Hafeez...very useful and informative :)
very impressive tutorial thank you ,but Is there any atuo layout generation from schematic or it is done only manually ?
thanks for the tutorial! Keep sharing please! :)
nice video! can you tell me how you installed it & got it working?
Very practical and useful tutorial ... Thanks
Thanks for the tutorial. Good one..... Can you please send video of 8x3 priority encoder design in cadence. It would be of great help for me.
Amazing! Thanks a lot
Hello Sir, thanks for the tutorial. In the "Virtuoso Layout XL Editing" Window, I can select and move transistors, as needed. But", I face challenges with electrical connections, specifically wires, as I am unable to select or edit them. I would appreciate guidance on how to solve this problem.
salam brother Hafeez, it's really helped a lot!
Awesome man....It was really helpfull...
That's GNOME
Nice explanation..!! Keep-up
Layout Starts at 9:14
Hello Sir
I am a 4th yr ECE Student. I am familiar with the Layout designing of basic gates in Cadence Virtuoso using 90nm and 180 nm tech nodes with DRC and LVS. I am looking for guidance from an experienced person related to this field.
Thank You
thank you sir.
Where did you get the cadence software
It was helpfull to me this tutorial.
While creating the pin in layout shouldn't the out pin be of type output
thanks hafeez.....
can you show me how to do layout for inductor and diode?
Thanks ,very helpful
Thank you sir!
SIR, i wana to draw layout of vlsi on chip interconnect, kindly suggest how to proceed
Hello sir, can you guide me I am interested in the analogue layout part and I want to learn analogue layout analysis from scratch so can you guide me from where we start to learn
Heyy.. how to make capacitor in layout?????? plz make one video on it..
sir it is showing that 240nm is not available lower limit is 400n m
Hello, Hafeez KT , I want to learn VLSI physical and lay-out design using Cadence Encounter and Cadence Virtuoso. But, I think Cadence Tools are not affordable by me alone. Again, I don't have an opportunity to join a training institute soon. I am being frustrated....can you suggest me an alternative affordable way to learn it.
you can start with Electric software. i think it is free
en.wikipedia.org/wiki/Electric_(software)
hOW to find area occupied by the inverter???
Thanks !!
hello, tutorial was nice. i need help in cmos circuit designing, basically i need help to simulate a cmos circuit can u help me how to do?
I have a virtuoso cadence version vIC6.1.4, but I don't have PDK environment (Ex: UMC_18_CMOS cell library) to design, so could you help me to find some PDKs? I appreciate that.
+Huy Nguyen Ngoc you can download ncsu pdk from here www.eda.ncsu.edu/wiki/FreePDK
Huy - Do you have the DRM and Verification tools???
nice tutorial..
what is the difference between proteus and cadence software?
Cadende softtware is professional software that permit create circuits design and layout for fabrication of vlsi circuits.
Hello hafeez Sir..can I have a tutorial for layout of low drop out voltage regulator in cadence virtuoso
27:12 who enter the room ?
Thanks
hi Hafeez KT
Assura menu is missing from my layout window.
please you can help me ?
my configuration is :
- ubuntu 14.
- cadence 615.5.
- technologie 0.18 µm
thank you in advance
thank u sir
thanks!
how did you check the distance at 22:13
Using Ruler.. Press k to get ruler
i have the pdk will you please tell me how to add library to cadence
Mail id vlsi.pcb.service@gmail.com
Whats up number 9344831002
please contact for tool and library guidance
Can you give me the download link of the libraries? Actuator I need UMC_18_CMOS library. It will be helpful for me if you give the direct download link of the library.
can i have candence virtuoso in my pc ? like any link is there to download it from?
Mail id vlsi.pcb.service@gmail.com
Whats up number 9344831002
please contact for tool and library guidance
@@milindbhandari2134 Mail id vlsi.pcb.service@gmail.com
Whats up number 9344831002
please contact for tool and library guidance
29:31 QRC Extraction
how to download cadence?
Mail id vlsi.pcb.service@gmail.com
Whats up number 9344831002
please contact for tool and library guidance
plz send me the download link and installation process of this software its extremely urgent
Mail id vlsi.pcb.service@gmail.com
Whats up number 9344831002
please contact for tool and library guidance
very nice..I
worst presentation .why are making those annoying sounds every time. ahhhh hmmm ahhhh