Honda Trx 450r Rebuild 2020 (Crf450r Mugen)
Вставка
- Опубліковано 19 лис 2020
- Hond Trx 450r rebuild 2020 hybrid crf 450r 2011 Mugen banzai kit
Suzuki LtZ 400 Yamaha raptor 700 Raptor 350 Kawasaki kfx 400 kfx450r Honda Trx 450r suzuki ltr 450 crf450 kxf450 ktm 505sx ktm 450 Maxxis Bighorn Ceros Stag CST Quadbanden Quadwielen Quadvelgen Raptor 250 YFM Raptor 350 YFZ450R YFZ450 LTZ400 LTR450 KFX450 YFZ 450 R YFZ 450 LTZ 400 LTR 450 KFX 450 Honda TRX 450 TRX450 Yamaha Suzuki Kawasaki Honda HGS Goldspeed Maxxis Silver-tec Powercommander V 5 Banden Velgen Maxxis RAZR2 Dakar DWT Bodemplaat Skidplate Grabbar Spoorverbreders achteras dominator 2 RPM DID 520 Radiateur Streamline stuurdemper SC4 SC3 nerfbar Yamaha raptor 700 YFM Yamaha quads suzuki kingquad stuurdemper grizzly 350 450 nerfbars voorbumper Polaris Can am Doma uitlaat FMF dominator 2 ketting tuning Yamaha YFZ 450R Grizzly Yamaha Blaster Suzuki LTZ 400 LTR 450
Yamaha raptor 700 660 Quad banden wielen velgen twin air
Yamaha Grizzly raptor yfz450 yfm rhino kodiak banshee wolverline worrior rzr 900 1000
Polaris sportman outlaw ranger scrambler phoenix
Suzuki kingquad ozark ltz 400 ltr 450
Kawasaki kfx 400 450 700 brute force
Honda trx 90 400 450 650 700 forman
Can-am outlander renegade quest DS maverick
Arctic cat side by side utility
W-tec CRQF WSP Yamaha Banshee Worrior
Quadwielen Quad wielen Quadbanden Quad banden Quadvelgen Quad velgen Quad crossbanden Quadcross KTM 450 505 525 sx 450 505 525 xc - Авто та транспорт
That quad looks good! JMR
Thank you
Is that a oem brake pedal & you drilled holes in it?
Thats the oem brake pedel and yes i just simply drilled holes in it.
@@HondaRacingHolland looks awesome
I'm doing a 2008 crf450x motor in a 2005 trx450 frame. I have to slide the motor all the way to the left so the sprockets will line up with each other. Did you have to modify the swingarm bushing sleeves?
The Sprocket side sleeves have been made shorter, te clutch side sleeves are the same size.
The bushings in the engine cases has 1 originele bushing And one side has a thicker bushing, not sure wich side that was
@@HondaRacingHolland oh ok. I thought there would be some modifications to the bushings. I already made the front motor mounts so now I will work on the swingarm mounts. Thanks for the reply. I might be reaching out again if I have questions. Thanks.
If u pause the video at 1:20 u can see that the right case bushing is thicker. Left bushing is stock
Also the notch in the frame for the intake tube
Oh yeah I see it now. Did you notch the frame? Nice job. Thanks.
Kick start problem.. I’ve seen you have a shorter one is that from a blaster200?
Yes thats correct
Ok thanks and I have notice your nice water pump cover i’ve check with Walsh only makes crf17-22
How did u do ur fuel pump setup I see u used the plastic tank
Its the oem tank, the petcock holes are blocked off and underneath the tank towards the radiator side there had been a hole drilled that fits the fuel pump and glued in place
What type of rear brake lever is that?
Oem Honda, drilled some holes in the lever.
Finally a TRX Hybrid CRF.. Does it go faster if yes how fast does it go?
Compared to a stock Trx450 motor with full exhaust and open airbox, the top speed is about the same, the CRF won't go much faster top speed wise, but it does accelerate much much faster, the CRF has more HP than the TRX has.
In the Netherlands its a very common thing to build CRF's in Trx frames.
I thought it would go faster for sure ok thanks nice to know .. I might ask more question because I’m going to do the same project..
here I don’t even know one person that did it so that’s why it’s nice to see one on youtube 👍🏻👍🏻
@@randygarza1415 ok but now it’s getting more and more populaire but its more LTR hybrid CRF450.. here is my question.. I’ve noticed that especially 2020 crf450 it’s running on pump fuel you have to buy a fuel tank from walsh .. but I’ve seen you are running with a trx stock tank ? So I’m guessing 09-14 not running on pump fuel or?
Im running pump fuel, and using the oem tank, the petcock holes are blocked off and a hole has been drilled underneath the tank to get the crf450 fuel pump in. They glued it in place whit Some type of adhisive, but this trick Does not work on all oem fuel tanks, The adhesive wont stick/hold on all model years of tanks
Trx450 exhaust work with the hybrid?
No, its a crf exhaust front pipe and mid pipe, silencer not sure of its a crf or Custom Made for this setup, its a HGS who does sell these pipes.
Are you in Michigan?
No man, I wish.
Netherlands, europe