Just for the fact that they brought over same mag compatibility they did for Glock lower to the MP9 lower is awesome! This has to be the best most affordable/customizable gas smg platform on the market. Hopefully the lowers are also swappable! Awesome ending song btw.
Never clicked on a video faster. Lmao I was about to say I remember you saying you were gonna clean your worktable until I saw the extra time at the end.
I’ve got my GHM9-G working with Marui mags and guarder mags. Interestingly, the new V2 Marui mags (with the G17.5) fit without modification. However for the older mags it required me to file down the trigger box “bump” that hold the magazine in place. You have to reshape that section so suit the shape of the Marui mags as they’re more square edged than the VFC/LD mags.
awesome, im also getting the SD KIT and the gen3 suppressor. would be awesome to see your step by step take down of it and reassembly. cuz i have no clue what im doing and i usually just follow youtube videos :D
Hey mate! Pretty cool to have a look at this GEN2. I've just made a review of the gen1 and I must say that I can not shoot straight with this gun. the hop effect is nice but BBs keep flying left and right. Tried with different barrels and buckings and nubs and it is not really better... Have you had this kind of trouble with your gen1? Cheers.
Any idea what the size of the o ring is at the magazine baseplate? I couldn't find any information on its measurements and don't have the proper tools to do it myself.
Literally last night broke the plastic outer barrel on my GHM9. Still dont get why of all components they couldnt have made that one component metal. Some dork genuinely put 14mm ccw tyread on a plastic barrel.
I've been really loving my Gen1 GHM9. I wish I had a friend with a printer though to make those spring spacers. I might still get this gen 2 though since they are pretty cheap. I just hate the stock pistol grip. Its so skinny for my hands. Had to immediately replace it. The only other problem I have with the gun, that will probably be the same with this one is when I got the longer metal outer barrel. I had to do some serious filing down to get it to fit in the hop up housing. And after I got it to fit, it tends to wiggle off center. I'm hoping eventually there will be another that fits better. Maybe an after market one.
Great video as always. Which mag do you think runs the best in this gun? I know you tested a bunch, but maybe you have fielded this or used the mags in a more extended capacity (if I were to buy a bunch of mags, which ones should I buy). Thanks a bunch!
hi james love the tune by the way 😁😁 question do lamda do the lower on it own as i would love to be able to swap uppers keep up the excellent content 👍👍👍👍
6:37 @jaeger precision take a look at the pins! They shouldn't go in that hard! I had to change the direction of the smal retaining clip in my airsoft ghm9. They somewhat mounted it wrong from factory!
Just for the fact that they brought over same mag compatibility they did for Glock lower to the MP9 lower is awesome! This has to be the best most affordable/customizable gas smg platform on the market.
Hopefully the lowers are also swappable! Awesome ending song btw.
Never clicked on a video faster.
Lmao I was about to say I remember you saying you were gonna clean your worktable until I saw the extra time at the end.
I’ve got my GHM9-G working with Marui mags and guarder mags.
Interestingly, the new V2 Marui mags (with the G17.5) fit without modification. However for the older mags it required me to file down the trigger box “bump” that hold the magazine in place. You have to reshape that section so suit the shape of the Marui mags as they’re more square edged than the VFC/LD mags.
Very excited for this to become available in the states. Only reason I say that is because I told myself NO MORE NEW GUNS IN 2024! 😂
awesome, im also getting the SD KIT and the gen3 suppressor. would be awesome to see your step by step take down of it and reassembly. cuz i have no clue what im doing and i usually just follow youtube videos :D
Love the song at the end
Hey mate! Pretty cool to have a look at this GEN2. I've just made a review of the gen1 and I must say that I can not shoot straight with this gun. the hop effect is nice but BBs keep flying left and right. Tried with different barrels and buckings and nubs and it is not really better... Have you had this kind of trouble with your gen1? Cheers.
Can we get a video like this using all the mags in all the guns to see what the best combos are?
Won’t lie. That AI sign at the end was bloody brilliant.
Ore of this please
A full album? 😅
Aesthetically the "apc45" is way more pleasing than the 9 with the vertical mag over the tilted mag.
Good 'ol bench! 😍👍
i waited so long for this ;0
Any idea what the size of the o ring is at the magazine baseplate? I couldn't find any information on its measurements and don't have the proper tools to do it myself.
Have they fixed the bolt from the gen 1 ?
Literally last night broke the plastic outer barrel on my GHM9. Still dont get why of all components they couldnt have made that one component metal. Some dork genuinely put 14mm ccw tyread on a plastic barrel.
I've been really loving my Gen1 GHM9. I wish I had a friend with a printer though to make those spring spacers. I might still get this gen 2 though since they are pretty cheap. I just hate the stock pistol grip. Its so skinny for my hands. Had to immediately replace it. The only other problem I have with the gun, that will probably be the same with this one is when I got the longer metal outer barrel. I had to do some serious filing down to get it to fit in the hop up housing. And after I got it to fit, it tends to wiggle off center. I'm hoping eventually there will be another that fits better. Maybe an after market one.
Where do you live i might be able to help you with those printed parts!
@@ddspixelrush6848 Massachusetts, USA
Hi I just took 2 pieces of clear 3/16 tubing cut them down to 1/2 inch. Put them in and it worked just like the spacers he sales.
@@arvo_septus uuf im from europe so i think im not able to help you sadly...
Great video as always. Which mag do you think runs the best in this gun? I know you tested a bunch, but maybe you have fielded this or used the mags in a more extended capacity (if I were to buy a bunch of mags, which ones should I buy). Thanks a bunch!
Is it compatible with the Maruyama scw pro mag ?
love the song lol
Been waiting let’s go
hi james
love the tune by the way
😁😁
question do lamda do the lower on it own as i would love to be able to swap uppers
keep up the excellent content 👍👍👍👍
You can get the lower on its own but you need a new gen2 nozzle so its not just a case of switch and go
6:37 @jaeger precision take a look at the pins! They shouldn't go in that hard! I had to change the direction of the smal retaining clip in my airsoft ghm9. They somewhat mounted it wrong from factory!
Looks like a modern day uzi
@Jaeger Precision, how long approximately are those short stroke spacers?
roughly 30mm
@@Jaeger-Precision Thank you!
#TEAMCLEANBENCH SUCK IT THOR