Great video I’m putting on on my 94 Tercel. With the manual it’s not necessary but I’m still learning how to shift smoothly and I think this would help. Thanks !🖖🏻
You do realize some older model cars don’t have a tach on the dash, and that tachs can help you see if you vehicle has a problem. Guess you wouldn’t know that since it doesn’t seem you have half a brain
This would all be unnecessary if car manufacturers would just install tachometers as standard equipment, especially in vehicles equipped with manual transmissions. Instead of having a one instrument cluster for the higher trims and a separate one for their lower trims wouldn't it be more cost effective to just provide one standard gauge layout that includes a tach on all trim levels?
What brand tachometer are you using? And if I may ask how much did it cost you? I'm considering buying one for a car that surprisingly didn't come with one from the factory (2005 Ford Focus) and not sure why the manufacturer didn't feel it was necessary to include on the gauge cluster. In a car with a manual gearbox especially, I feel it is very important to know what is going on with the engine at all times. That being said, I found a Bosch tachometer online for about $30. Is this a good brand?
This one is an Equus 7078. It costed me about $70 Canadian. Bosch is a good brand. Yea, the same thing with this car - It doesn't come with a factory tach. Stupid eh.
@@BriggsGuy54 Hello i am from srilanka . I have toyota axio 2007 X grade . It doesn't has RPM meter . But the same car G grade ( has more features than X grade ) has RPM meter in the meter board . So i found same meter cluster From G grade . I want to fix this meter board cluster to my car . So i just want to know i have to make new wiring or not. Tks for reply.
At the time of this video, I cut the muffler off and ran a straight pipe out the back. Since it was 97 I cant to do much as 97 still takes a probe to test the emissions. When I knew I wasn't going to have the car long I cut the cat off and made it a full straight pipe. Check my account for videos of it fully straight. I had it on the road like that for almost a year.
i got a question, i got a 2002 toyota echo 1.5 and it has ignition coil packs. im not sure where the green wire will go since i dont have a distrubitor
+steve lamain Make sure the wire splitter is firmly clipped in. The first time I did it I had no signal also but I used pliers and pressed the clip together so it would get contact with the wire and it did the trick. Good luck!
so I installed a tach in my 1995 tercel the same exact way you did. the tach itself works perfectly fine but the only issue I'm having is the green wire. I fed it through the door the same way you did but the hood won't latch all the way so any ideas for me there??
Jon Fincher spray white lithium grease all over the hood latch mechanism. and keep trying to close the hood to work i through it. Once it closes pop it and shut it, pop it and shut it, pop it and shut it. That will work the grease through it
Drill a 1/4 inch hole through the firewall with a rubber grommet in it then run the wire through like your supposed to so i isn’t getting pinched by the hood or door
i hope this helps, i have a 95 ford f150 and i want to wire an rpm gauge cause i have subs hooked up and i need to know when to shift since i wont hear it
Jeff Akerson i have 2 shallow mount 10"s, all you need to do is put them behind the seat, there is a box made that thins towards the top to fit in regular cab trucks
How would I add a Tachometer on my 1969 Morris Minor? I guess it isn't possible because there is no sensor? And if it isn't, is there a kit with sensor?
Well, your distributor gets voltage somehow. You gotta splice the signal wire of your tach to the ignition wire of the distributor, as the tach will read how fast the distributor spins and releases voltage and use that as your rpms. Being from 69 theres bound to be a distributor with a rotor and cap lol
@@BriggsGuy54 bet I appreciate it the advice bro, I figured it. I can wire into the direct acc power supply behind radio or push through the fire wall and link up to the plug control harness(ignition swt. Plug harness and tap into open fuse slots under dash👍🔧
UntrustedAlly i figured it out. on my distributor there's 6 wires going to spark plugs then theres a wire in the middle going to the ignition coil. also going into the ignition coil should be a green wire, that's what you splice into
I figured it out myself, hooked it all up right, then discovered I had a faulty tach. Even used a multimeter to check everything. Too late to return, too.
Does anyone know where to attach the tach wire on a 1999 Toyota Corolla because I want a tach and can't find where to attach it. I've been looking for weeks now and am getting fed up. I seriously want to just sell it for one with a tach at this point. It also runs and drives just fine.
There is a plug in the distributor with 4 wires on it. The black one is the ground wire for wiring a tach. The ground wire provides a pulse signal. Use a wire splicer about 6 inches up the wire away from the distributor. The distance is in case the splice ever corrodes or fails you wont be stuck with it being too close to the plug making it hard to cut out the bad wire and reattach it. Understand that if your car ever shuts off in the future and has no spark this should be the first guess as to why. Not that it happened to me, but your cutting the wire open exposing it to air and other contaminants so it could always happen.
If you need rpm in a civic just pull the gauge cluster from an ex they all cross compatible and you can get one used at a junk yard for like 20 dallord although and so should have a tach
+Cj Walsh I drove an '87 Caprice with the 4.3L fuel-injected... And an '87 Caprice with a 350 carb... I've driven an '85 Cutlass Supreme with a 305 V8 carb, an '86 Cutlass Supreme with the 307 V8 carb. Every one of those Rochester carbs sucked, but once you drop in a better carb, they run FOREVER! I personally have an '87 LeSabre, even with the little 3.8L she is a great old girl. Not as good as a Regal or Grand National, I may not beat someone off the line, but once I hit 3rd, punks are in my rearview realizing they just got whooped by a a thirty-something driving a Granny Car. They don't make cars like that anymore. *sigh*
@@BriggsGuy54 thanks that one looked perfect sad they dont ship to the netherlands :/ cant find it anywhere! all tachometers here that go via ignition are 150 euros or more. Cheap tachs here go via the dynamo but since my car is older and not a diesel it wouldnt work that way. I hope ill find something maybe
it seems to appear to be a manual transmition by seeing three pedals so my question is why does it not have one I nevr seen a manual tran. not have one whole purpose so you don;t over draft the engine to the gear shifting
Kangol Kid It is a manual! Good point! Having a tachometer in the gauge cluster is actually a manufacture option. I have no idea why they don't come standard. Surprisingly the car had 262,000 when I bought it and those were put all on it with no tach. This was the first thing I did to the car after I had it on the road. I couldn't stand not knowing what I was revving it.
+Kangol Kid Yeah my parent's 2000 Ford Escort is manual and doesn't have a tach either. I learned how to drive stick with that car. Me: "But when do I shift, dad?" Dad: "When you feel like it"
+Kangol Kid I've had a 89 Mazda 323 and currenty drive a 99 Mirage; both with no tachometer. If you really learn how to drive a manual, you don't need one. The best of us use our ears, not our eyes
+Shadizzleify I would suggest using plastic split loom, it's cheap enough, and will offer a decent amount of protection for the wire, since it is likely to rub against the metal and possibly wear through the insulation.
+Tyler Cameron Thanks for the compliment, and for showing interest in my exhaust! It's not actually a fart can... I removed the catalytic converter and the muffler and replaced them with a straight pipe.
i do agree with you. hahahaha he could have gone through one of the grommets through his fire wall. if he went online to find where the green wire (ghetto hook up) goes, he should have gone online and look on how to install it the correct way.
+Daniel Siegfried Dam yo, why would you say the mans car is trash? I mean I laughed out loud for real, no lol, but come on man, that ain't cool. Thanks for the video Briggs.
Lmao I looked up this video so I can do this to my Tercel, only to be greated by a Tercel.
7 years later and same lol
ups for the tercel
I instantly recognized that gauge cluster. Tercel owner myself. Glad I found your video.
Same
Yup same
Same, the vent gave it away to me
Great video I’m putting on on my 94 Tercel. With the manual it’s not necessary but I’m still learning how to shift smoothly and I think this would help. Thanks !🖖🏻
Ears help more than a tach
@@patgraeme775agreed
your camera needs glasses
Maybe you do.
@@BriggsGuy54 he means the camera is not focused
to be fair my phone does that all the fuckin time. by the way, hes trying to help ppl, so stfu
@@Niko-bf7nw turn on manual focus
crown Vic guru how you doin
Looks like a race car now . I added one and got 30 horse more !!
You do realize some older model cars don’t have a tach on the dash, and that tachs can help you see if you vehicle has a problem. Guess you wouldn’t know that since it doesn’t seem you have half a brain
@@i_see_u_0_0wweee99 ur a douche bag bro
"How to wire a Tachometer"
The video: "Don't! Just wedge the wires into the fusebox!"
This actually helps me 100% I have a 97 turcel 😂😂 same colour and everything lmfao
bought a tercel yesterday, same colour, same year 😂
Lol. Lucky
No way I’m looking for the same car model. Sick coming across this Will help awesome
Thank you. I actually understood this video unlike all the rest!
This would all be unnecessary if car manufacturers would just install tachometers as standard equipment, especially in vehicles equipped with manual transmissions. Instead of having a one instrument cluster for the higher trims and a separate one for their lower trims wouldn't it be more cost effective to just provide one standard gauge layout that includes a tach on all trim levels?
Exactly what I'm talking about. I have a 06 HB 2dr Focus 5 speed with no Tach. Yet a 4dr wagon Auto has one. Makes no sense
I noticed the Tercel cluster before you said the brand and model
If you have an LED bulb in your tach, don't hook it up to your dimmer switch.
why
Nice and simple explanation, I wouldn't bother going through the bulkhead either, well, not on a '97 car anyway☺
Thank you just installed mine today Lucky I hade a 98 Tercel was very easy to do
What gage did you use I like it it's small. Also you think it will be the same install method for a 92 corolla?
Thank you bro.
I have a 95 and I didn't know until I saw your video because other videos are for older car.
I like where your mounted at that’s gonna work perfect in my car
What brand tachometer are you using? And if I may ask how much did it cost you?
I'm considering buying one for a car that surprisingly didn't come with one from the factory (2005 Ford Focus) and not sure why the manufacturer didn't feel it was necessary to include on the gauge cluster. In a car with a manual gearbox especially, I feel it is very important to know what is going on with the engine at all times. That being said, I found a Bosch tachometer online for about $30. Is this a good brand?
This one is an Equus 7078. It costed me about $70 Canadian. Bosch is a good brand. Yea, the same thing with this car - It doesn't come with a factory tach. Stupid eh.
@@BriggsGuy54 Hello i am from srilanka . I have toyota axio 2007 X grade . It doesn't has RPM meter . But the same car G grade ( has more features than X grade ) has RPM meter in the meter board . So i found same meter cluster From G grade . I want to fix this meter board cluster to my car . So i just want to know i have to make new wiring or not. Tks for reply.
@@agampodipasindumangaladezo5547 Hey man. I dont know how you would hook that up. It may be totally different.
You can buy a good one for cheap on eBay
Nice I got a manual 06 Focus 2dr HB with no Tach. I'll never understand the logic behind it, so I hear you my guy🤣
currently installing a tach on my 2009 Ford F150 my only problem is finding out which wire i need to splice to connect to the green wire
Is this any similar to an gauge install on a "2002 Celica gt"?
Wow that Tercel revs up fast! My yaris seems to rev up way slower than that... No fair.. 😢 😂
Thank you for keeping it simple, amazingly helpful couldn't thank you enough. I'm decent at mechanics but I have no clue about wiring 😊
IS IT just piston 1 for a tach?
I’ve seen people with a adapter and was wondering if I need it or not
I’ve owned 2 Tercel’s 5 speeds
Pure highway mileage would truly exceed 50 mpg
that green wire is going to move a lot, probably break.
But, easy to repair.
so i cant add a second tacho to car which has already got one as standard?
how do i find which wire on the ignition module?
you put a bolt in your dash I dont think the green wire is the promblem. The promlem is a loose nut between the steering wheel and the seat
What was the exhaust on the car, I have the same car and I'm installing a tachometer too, but seriously is that straight pipes?
At the time of this video, I cut the muffler off and ran a straight pipe out the back. Since it was 97 I cant to do much as 97 still takes a probe to test the emissions. When I knew I wasn't going to have the car long I cut the cat off and made it a full straight pipe. Check my account for videos of it fully straight. I had it on the road like that for almost a year.
Briggs Guy It sounds like ass. 4-cylinder engines should not be straight piped
How to install RPM meter in a Bajaj 2 stock tuk tuk?
u can use the obd2 port too bottom 3rd pin from right for my toyota echo
What if you're like me and have a fuel injected car that ALSO has a distributor cap and is NOT a distributorless ignition system?
Look at a wiring diagram and find a ground wire. Use that as it's the "signal" wire.
i got a question, i got a 2002 toyota echo 1.5 and it has ignition coil packs. im not sure where the green wire will go since i dont have a distrubitor
I have same car just tried to wire it the same it lights up but no signal . RPM doesn't work. what am I doing wrong.. I installed exactly like u did
+steve lamain Make sure the wire splitter is firmly clipped in. The first time I did it I had no signal also but I used pliers and pressed the clip together so it would get contact with the wire and it did the trick. Good luck!
And that’s how you start a fire 🔥
How did you tap into the fuse like that?
He should be using a add a fuse
Not a bad install great tips 👍
Hey man this video really helps I have a tercel 96 nd also I wanted what did u put on ur engine to make it go to 180 mph
gustavo montes you're a funny guy its obviously kph. It's probably in canada.
+gustavo montes The only way this car is doing 180mph is if you drop it out of a plane. A Bradd LaRocca guarantee.
J. Bradd LaRocca unless it’s a high end sports car
@@edgarrivera4623 then itd go 240mph being dropped from an airplane. Cuz of aerodynamics 😂
so I installed a tach in my 1995 tercel the same exact way you did. the tach itself works perfectly fine but the only issue I'm having is the green wire. I fed it through the door the same way you did but the hood won't latch all the way so any ideas for me there??
Jon Fincher spray white lithium grease all over the hood latch mechanism. and keep trying to close the hood to work i through it. Once it closes pop it and shut it, pop it and shut it, pop it and shut it. That will work the grease through it
thanks, I will have to try it tomorrow when it's not so cold.
Drill a 1/4 inch hole through the firewall with a rubber grommet in it then run the wire through like your supposed to so i isn’t getting pinched by the hood or door
do i need to use constant 12v from the fuse box or i could use it from behind my radio?
i hope this helps, i have a 95 ford f150 and i want to wire an rpm gauge cause i have subs hooked up and i need to know when to shift since i wont hear it
Can i ask where you put your subs i have a 93 and am trying to figure out how i should upgrade my system as its only a regular cab
Jeff Akerson i have 2 shallow mount 10"s, all you need to do is put them behind the seat, there is a box made that thins towards the top to fit in regular cab trucks
+ImKnil can the bench seat still be all the way back ?
Jeff Akerson mine can be
+ImKnil or you could just shift every 10 mph, lol cruise in a higher gear while you lean back in your seat with your hat down low acting all gangster.
Hello, how does the white wire connect to the power source?
How would I connect the green wire for 94s10 distributorless?
wow a bolt hole in a nice dash, who would a thought
Conecte uno aún tercel solo limita a 2rpm no me pasa mas de ahy
I have a mechanically injected 5.9 Cummins with a Bosch P7100 mechanical injection pump. Does this have an ignition module like the Turcel?
Nope! Would start by looking at a schematic of the crank sensor to see what wire would be the feed.
Addd a fuse???
I have a friend that want to hook one up to honda civic 1999 its a automatic u think it be ok or dum to have one
can i used this guide for toyota vios 2004?
Hi what type gauge tachometer?
Sir help Toyota hiace cummuter 2018 install ah rpm ..
Was the dash easy to get off to get the wires in
I don't remember exactly how i fed the wires through the dash. But i know it didn't take me long.
what about a 95 nissan pickup 2.4 litre with a coil pack and distributor.........wire to distributor not a signal wire
Is that a 3rz?
An easier thing would be just to put some loud mufflers so it is easier to hear when to shift, that is what I did......a glasspack on my 98 Sentra
That camera focus tho
How would I add a Tachometer on my 1969 Morris Minor? I guess it isn't possible because there is no sensor? And if it isn't, is there a kit with sensor?
Well, your distributor gets voltage somehow. You gotta splice the signal wire of your tach to the ignition wire of the distributor, as the tach will read how fast the distributor spins and releases voltage and use that as your rpms. Being from 69 theres bound to be a distributor with a rotor and cap lol
Hey bud, what would u say about 1997ek civic hatch jam swap automatic where to I install the green signal wire ignition source or tach aensoe
Hey man. That may require something more specific. Try looking up a how to on that car.
@@BriggsGuy54 bet I appreciate it the advice bro, I figured it. I can wire into the direct acc power supply behind radio or push through the fire wall and link up to the plug control harness(ignition swt. Plug harness and tap into open fuse slots under dash👍🔧
Thank you. That's helpful
Hi what’s another name for the ignition module? I cannot for the life of me locate mine and google won’t help
i got a '79 with a carbourater so what do i hook up the tach to?
and im pretty sure theres no tach wire on my distributor
+The Andoxico '77 here. Did you figure it out? I'd love to install a tach in my car.
+The Andoxico Hook the green tach wire to the "-" ground on your coil pack.
UntrustedAlly i figured it out. on my distributor there's 6 wires going to spark plugs then theres a wire in the middle going to the ignition coil. also going into the ignition coil should be a green wire, that's what you splice into
I figured it out myself, hooked it all up right, then discovered I had a faulty tach. Even used a multimeter to check everything. Too late to return, too.
can u tell me what is the red thing u connect wires?
The red thing is a wire splicer. Its not the best way to spice a wire so don't make it a habit of using them a lot but it gets the job done.
Wha'ts the highway speed at 3000 RPM for this car? What does it read on the tach?
its around 130 kmph. i dont drive the car anymore so i couldnt tell you exactly.
Mine is 1994 model it's carburetted.
Does anyone know where to attach the tach wire on a 1999 Toyota Corolla because I want a tach and can't find where to attach it. I've been looking for weeks now and am getting fed up. I seriously want to just sell it for one with a tach at this point. It also runs and drives just fine.
There is a plug in the distributor with 4 wires on it.
The black one is the ground wire for wiring a tach. The ground wire provides a pulse signal.
Use a wire splicer about 6 inches up the wire away from the distributor. The distance is in case the splice ever corrodes or fails you wont be stuck with it being too close to the plug making it hard to cut out the bad wire and reattach it.
Understand that if your car ever shuts off in the future and has no spark this should be the first guess as to why. Not that it happened to me, but your cutting the wire open exposing it to air and other contaminants so it could always happen.
Will this work on my Mercedes 190e?
how abt on 2013 Toyota Prius
car model?
I'm looking for the same thing but for a 1995 Honda Civic SI
If you need rpm in a civic just pull the gauge cluster from an ex they all cross compatible and you can get one used at a junk yard for like 20 dallord although and so should have a tach
Would this method of installation work on my 1995 bmw 318ti?
Did you find out?
Not all cars are 80s and up I've got an 87 caprice she's still got the carb :)
As of about 86 carbs were optional. It's even easier to hook a tach up it a distributer style setup.
yes and thank you for vid bro you should see my caprice shes a project
+Cj Walsh I drove an '87 Caprice with the 4.3L fuel-injected... And an '87 Caprice with a 350 carb... I've driven an '85 Cutlass Supreme with a 305 V8 carb, an '86 Cutlass Supreme with the 307 V8 carb. Every one of those Rochester carbs sucked, but once you drop in a better carb, they run FOREVER!
I personally have an '87 LeSabre, even with the little 3.8L she is a great old girl. Not as good as a Regal or Grand National, I may not beat someone off the line, but once I hit 3rd, punks are in my rearview realizing they just got whooped by a a thirty-something driving a Granny Car. They don't make cars like that anymore. *sigh*
hi nice video, do you remember what tachometer u used in this video?
Equus Pro Tach. I think it's the 6088. Nice little tach. Not too big.
@@BriggsGuy54 thanks that one looked perfect sad they dont ship to the netherlands :/ cant find it anywhere! all tachometers here that go via ignition are 150 euros or more. Cheap tachs here go via the dynamo but since my car is older and not a diesel it wouldnt work that way. I hope ill find something maybe
You could have used a add a fuse.
Good video but need better camera 📸 lol
it seems to appear to be a manual transmition by seeing three pedals so my question is why does it not have one I nevr seen a manual tran. not have one whole purpose so you don;t over draft the engine to the gear shifting
Kangol Kid It is a manual! Good point! Having a tachometer in the gauge cluster is actually a manufacture option. I have no idea why they don't come standard. Surprisingly the car had 262,000 when I bought it and those were put all on it with no tach. This was the first thing I did to the car after I had it on the road. I couldn't stand not knowing what I was revving it.
Kangol Kid I drive a manual Hilux and it doesn't have a tacho. You can just go by ear or how the car feels to drive.
Oh okay thanks eveery one I just oblivious I always driven a standard and usually make sur H.U.D has all gauges no idiot lights
+Kangol Kid Yeah my parent's 2000 Ford Escort is manual and doesn't have a tach either. I learned how to drive stick with that car.
Me: "But when do I shift, dad?"
Dad: "When you feel like it"
+Kangol Kid I've had a 89 Mazda 323 and currenty drive a 99 Mirage; both with no tachometer. If you really learn how to drive a manual, you don't need one. The best of us use our ears, not our eyes
Where did you get the kit?
Canadian Tire sells them for around $60. Napa stores can order them in, I'm sure most other parts stores can get them too.
They’re cheap on EBay
Please redo your video to see better
My Corolla doesn't have a distributor. It uses electronic ignition.
Still has a distributor
Omg I would send a few add fuses.If 1 of those wire falls it's going to be a bad day.
TheVintagetamiya Theres only two wires. As long as it's in nice and tight it's good. If you think its worth it to run fuses on a Tercel be my guest.
that's funny! tercel??
Electrical work always scares me
Great way to short out a wire... Running it through the door. Why can't people run wires properly through a grommet?
because 97 tecerl beater with a fart cannon on it
Shadizzleify the green wire should be on the coil ground so I dont think it makes a difference. Even if it shorted it would make things better? lol
+Shadizzleify I would suggest using plastic split loom, it's cheap enough, and will offer a decent amount of protection for the wire, since it is likely to rub against the metal and possibly wear through the insulation.
My truck has never been over 4 thousand
Why would anyone put a fart cannon in a Tercel?...
+Tyler Cameron Thanks for the compliment, and for showing interest in my exhaust! It's not actually a fart can... I removed the catalytic converter and the muffler and replaced them with a straight pipe.
+Briggs Guy (BriggsGuy54) Ah, I see!
+Briggs Guy (BriggsGuy54) hmm its runnig fine no loss of power yu still have resonators rite
Nothing but straight exhaust pipe (:
bruh crazy how is the engine like yu dont feel no loss of power?
LMAO! Turcel? Hahahaha
Now do a diesel
I thought only high school kids ran wires around the door jam. SMH
At the time I was 19 - I had just got out of highschool.
Not on a td5 lanny you wont!
LOL
GHETTO wire job
i do agree with you. hahahaha he could have gone through one of the grommets through his fire wall. if he went online to find where the green wire (ghetto hook up) goes, he should have gone online and look on how to install it the correct way.
It works doesn’t it?
LOL god forbid you have a wire but the copious amounts of garbage on the floor is just fine
lol so random i have the sam car
This video is comically bad
I hope it was intended lol
can u be more energetic, that will really help.
he says hes a mechanic I woulnt let him change the battery in my old ladys vibrator
haha tell that to the $200 i made of this video. And I dont claim to be a mechanic.
well I guess were your at you could buy a new car
#ricer
How?
Car is trash
It might not be the best and most fastest car in the world, but it sure in hell holds up.
Its still on the road... 308,000 kms.
+Daniel Siegfried Dam yo, why would you say the mans car is trash? I mean I laughed out loud for real, no lol, but come on man, that ain't cool. Thanks for the video Briggs.
take that $200 and buy a new car
You can get 4 nissan micras with 200 bucks.. I know i got two for 100 bucks.. Driving one to work 100km per day for months and no problems yet.
I’ve seen people with a adapter and was wondering if I need it or not