Unlocking 3D Print Secrets: What 3DBenchy Reveals About Your Prints
Вставка
- Опубліковано 12 вер 2024
- Striving for perfect 3D printing? The Benchy, a widely used test model, is your secret weapon. This video will unravel the practicality of this little boat, showing why it's a must-have for evaluating and calibrating your 3D printer and filaments.
Creative Tools created the Benchy to facilitate tests and calibrations with a single piece. Its features allow you to assess print quality, printer calibration, and other critical aspects such as overhang, bridge, volumetric flow, geometric accuracy, elephant foot, retraction, bed adhesion, layer adhesion, and much more.
But what is tested?
🟢 Overhangs: Evaluation of unsupported angles.
🟢 Bridges: Printing bridges and cooling filament.
🟢 Ringing: Resonance effect caused by print speed.
🟢 Retraction: Evaluation of retraction and stringing.
🟢 Dimensions: Accuracy in horizontal and vertical measurements.
Tips for printing the Benchy correctly:
🟢 Use the original model from Creative Tools: www.3dbenchy.com/
🟢 Print at 100% size for accurate results.
🟢 Test before and after calibration adjustments.
🟢 Avoid using brim to test warping.
🟢 Use calipers to measure and ensure accuracy.
Check out these and other tips in this complete video! Remember to subscribe to the channel, leave your like, and hit the bell to receive notifications for the following videos!
- - - -
🛠️ Useful Links:
🟠 Multi Filament System for Creality K1 and K1C: • Creality K1 & K1C: Mul...
🟠 Multi Filament System for Creality K1 Max: • Multi-Filament System ...
🟠 Inventor's Garage Store: www.inventorsg...
_______________________________
Follow me on Instagram: / diginventor
LinkedIn: / wesleymilan
🟠 Multi Filament System for Creality K1 and K1C: ua-cam.com/video/zW_LQTWsoRs/v-deo.html
🟠 Multi Filament System for Creality K1 Max: ua-cam.com/video/1EkyMdFxhik/v-deo.html
🟠 Inventor's Garage Store: www.inventorsgarage.store/
Awesome video! Good point at 5:58, I always forget to take my "medication" before and after my benchy tests 😂
Ringing is the biggest thing I have now on my printer
I'll make a video talking about it, thank you for your feedback @ppekala
It's pointless unless you measure every aspect of it, so it matches what it's supposed to be, not just look at it and say hey that looks like a good benchy, when everything maybe out of whack.
well, I think that's the point, some people don't care about scaling precision so they can only pay attention to overhanging, flow rate etc, and others will look at measurement, and everybody can use the same model as a parameter, that's the magic 😉
He did say to have calipers…?😅