Girl I’m 63 years old & been trying to get this sublimation / thing right,, well guess what u helped me. I could understand every direction u told us to do! Hats out to u from this “ bout to throw it out da window Grandma” TyTy
You must have been a teacher in a former life! Your step by step has been the best I have seen thus far! Thank you so much for the walk through on the pc and printer!
This is the BEST tutorial I have come across. The steps, the directions, and the measurement are 100% Thank you so much for your time and help. Two thumbs up!!
Thank you soooo much for this !!! It helped my tumbler come out so nice ! Can you do a tutorial for the sublimation mugs ? I was trying to find one but i didn’t see it
Thank you, I just bought my first heat press. Your Video very clear and understandable .. I'm sure I'm gonna watch few more times before I start my 1st one. Thank You
Your instructions have been the best I have heard so far. Direct and brief and not a lot of unnecessary talking about stuff that had no bearing on sublimating - THANK YOU !!!
Hello. Love your video. Very helpful. So i have a question. Do you use the same setting for all design tumblers? Ive notice that on the red color whe. I have something red it looks more orangy. The settings i have it is on 0, 4, 8, and 3 hope to hear from you back 😊
Everything about this video is soo helpful. I just made my first tumbler, and from the color to size was perfect!! Thank you soo much for sharing your knowledge!!!!. ❤
Thank you for this awesome tutorial. I learned so much with your presentation and finally did a tumbler without ghosting. I've watched other tutorials but yours is the most helpful ❤. Looking forward to seeing more of your tutorials
Just got into sublimation and found your video. Your measurements and the way you added the tape had me with an almost perfect cup. Just didn’t leave it long enough. Thank you for great content.
Hello. I don't speak your language but I really liked the video, I understood a lot of what you showed, but since I don't speak English I had some doubts. What did you clean the Tumbler with? Why do you put heat tape behind the insole? And finally, are your tumblers the exact size of the worksheet? I have made artos and sometimes there are white spots on the bottom where the bottom is not straight, I have used millimeter larger templates, therefore I have to make small doubles to stick the tape at
i am finding it impossible to download the silhouette studio 😖 it has so much adds to download other stuff and its just stuck on the installation process
Bidirectional printing: Prints faster because it prints in both directions, but it may result in slightly less sharp prints, especially on high-quality sublimation designs.
so i have a question i have 20oz Tumbers and i have 8.5x11' paper and i did my first print out and my print does not fit around my cup the paper don't fit around i also have the 11x17 also my image is tall but i have to cut out some of the print what do i have to do for my image to fit around and to fit up and down so i dont have to cut off some of the image plz help this will be my first cup i am trying to make. thank you.
i have a problem with my green turnsyellow when pressed and my blue dont press .it stays on the paper . what can i do . is it my ink . i have used all types of sub paper.i have tried different temp and time .i even change up on color setting. Help
My printer settings don’t show the same at all. I did step by step. But once I hit print it don’t give me the same options. Also I did sizes exactly how you said but it came out too short. I need help
Try going into your settings then printer and devices and select your printer the try changing the preferences if that doesn’t work once you select print for your image the print option box pops up you can try changing there. It has to be there if you followed step my step. Also with that size you have to cut exactly on the line not to much or it will come up short. I have that issue too sometimes and I personally think that some tumblers are 20oz but differ in sizes sometimes so you can also go up in size. Try the size 9.33 or 9.34 x 8 this should give you extra to work with. Let me know if you still need help. 😊
I watch your video the other day as I was looking for information on sublimation tumblers. Yours has been the best that I’ve watch. Thank you very much for sharing John Figueroa.
Thank you for your help, could I ask what kind of PC you use? I think the pc I have doesn’t have the same printer settings and it might be because I need an updated pc.
Loved your video...by far the best one I have watched. Made my 1st tumbler but I still had some imperfections but i loved how it turned out. I will watch again and try again so i can do better. Thanks so much for this video. 🥰🥰🥰
Hey love I started my tumbler business and have been having an issue with the image not transferring. To the tumbler. I set my heat press to 385 for 55 sec then 30 seconds and when I unwrap it nothing is on the tumbler , the paper turnt brown and hot so I know the heat press machine works . I have tried different temperatures and double wrapping it with butcher paper. Do you know what causes this or how it can be fixed I’m running out of options and I don’t want to give up on my business
How does copyright work for something like that design you have? Would you be allowed to sell it since its not the exact starbucks logo or could they still get you for copyright since everyone knows what it is?
I tried using this video to help me become more familiar with the steps of doing this but, when I push the print button and I’m at the screen where u can change the settings, my screen doesn’t show me as many details as this lady’s screen does.
I have a hp laptop that I’m working from setting are different across different devices you have to find where yours is located maybe go to your computer settings and try changing the preferences under your printer there
Nicely done. I just started doing this and your tips answered a lot of the questions I had. I also read the comments and a lot of the questions people are asking you actually answered in the video, I think they should rewatch and listen to the things you said. Great work.
Girl I’m 63 years old & been trying to get this sublimation / thing right,, well guess what u helped me. I could understand every direction u told us to do! Hats out to u from this “ bout to throw it out da window Grandma” TyTy
I’m so glad I could help you don’t ever give up
You look amazing for 63
You must have been a teacher in a former life! Your step by step has been the best I have seen thus far! Thank you so much for the walk through on the pc and printer!
lol no i think I’m actually terrible at explaining because I’m a talkative person and I don’t want to talk so much it become confusing
This is the BEST tutorial I have come across. The steps, the directions, and the measurement are 100% Thank you so much for your time and help. Two thumbs up!!
thank you for setting I didn't know how to make sublimation very vibrant colors . beautiful design
Glad I could help!
What size do you use for printing?
Thank you soooo much for this !!! It helped my tumbler come out so nice ! Can you do a tutorial for the sublimation mugs ? I was trying to find one but i didn’t see it
Yes I sure can
You did a GREAT JOB!!!
Thank you, I just bought my first heat press. Your Video very clear and understandable .. I'm sure I'm gonna watch few more times before I start my 1st one. Thank You
Glad it was helpful!
thank youuuu girl for the video, This tuto is perfect and the trumbler look's like very pretty ,
You’re welcome 😊
Amazing content. Thank you!
This is the best detailed video by far....my tumbler came out PERFECT! Thank you.
Great to hear!
Your instructions have been the best I have heard so far. Direct and brief and not a lot of unnecessary talking about stuff that had no bearing on sublimating - THANK YOU !!!
Great video! =) Can you show how you measured to get the exact size for your tumbler?? So that it just butts up and doesn't overlap.....
I cheated and did a tumbler where the top and bottom of the print were white, that's where my ghosting issue is. Thank you for the video.
Hello. Love your video. Very helpful. So i have a question. Do you use the same setting for all design tumblers? Ive notice that on the red color whe. I have something red it looks more orangy. The settings i have it is on 0, 4, 8, and 3 hope to hear from you back 😊
Everything about this video is soo helpful. I just made my first tumbler, and from the color to size was perfect!! Thank you soo much for sharing your knowledge!!!!. ❤
You are so welcome!
Thank you for this awesome tutorial. I learned so much with your presentation and finally did a tumbler without ghosting. I've watched other tutorials but yours is the most helpful ❤. Looking forward to seeing more of your tutorials
EpsonC98398 Sure color F170 is my printer type. But My prints are ghosting. Please help 😢😂🖤💐
Your prints are ghosting after your presses? Try applying more pressure on your heat press
Just got into sublimation and found your video. Your measurements and the way you added the tape had me with an almost perfect cup. Just didn’t leave it long enough. Thank you for great content.
Great Tutorial. My seams are FINALLY crips and sharp. The side taping was the trick. Noooooo ghosting. Thanks so much....
No problem glad I could help 🙂
I’m new here and I’m trying my best to find the silhouette studio app…can you please lead me in the right direction. I’m using a iPad for all my work.
Yes just type silhouette studio in safari then click on it’s official website you can download the app straight from their website
Soooo pretty! I’m ready to get back into crafting so thank you for the motivation! You’ve earned a new subbie! I neeeed that cup!
Thanks for subbing!
Hello. I don't speak your language but I really liked the video, I understood a lot of what you showed, but since I don't speak English I had some doubts. What did you clean the Tumbler with? Why do you put heat tape behind the insole? And finally, are your tumblers the exact size of the worksheet? I have made artos and sometimes there are white spots on the bottom where the bottom is not straight, I have used millimeter larger templates, therefore I have to make small doubles to stick the tape at
Thank you for taking the time to make such a detailed tutorial! Your video was fantastic and I learned a ton!
you did a very great job on this video. Great presentation
i am finding it impossible to download the silhouette studio 😖 it has so much adds to download other stuff and its just stuck on the installation process
Do you have space for the app on your computer?
Thank you 🙏🏼 can you write the studio name I am trying to find it 😅
Silhouette Studio
Well done! Best instructional video I have seen.
Thank you for your patience showing us very slow, I'll try out, first beginning. So nervous
what paper cutter is that you are using if you don't mind me asking
I bought it from hobby lobby
That came out perfectly. Thanks for sharing... New Subscriber!
mine came out all faded and the the heat tape left marks all over the tumbler 😭
Sounds like you made a mistake somewhere. Your temperature may be to high or your heat press is over heating that sounds like you burned it.
This is the first time i hear someone has the same name as my sister, just spelled a little different
She has a beautiful name 😊
You use the regular ink or special ink ?
Sublimation ink (hippo) from Amazon
Absolutely BEAUTIFUL!!! That PURPOSE!!! 🌹
i cant get mines to stay at the 9.323. Im very new to your page
Once you change the size hit the lock button beside it
1 year later and this video is still helping civilians such as myself. Thank you for this!
You are very welcome
Bidirectional printing: Prints faster because it prints in both directions, but it may result in slightly less sharp prints, especially on high-quality sublimation designs.
thank you, only one question, enhancing my color my preference box its different from your. I have a brothers printer. thanks again love the video
so i have a question i have 20oz Tumbers and i have 8.5x11' paper and i did my first print out and my print does not fit around my cup the paper don't fit around i also have the 11x17 also my image is tall but i have to cut out some of the print what do i have to do for my image to fit around and to fit up and down so i dont have to cut off some of the image plz help this will be my first cup i am trying to make. thank you.
What is the size for 12oz tumbler
Haven’t done a 12 ounce but if you have a tape measure you can use that to size the cup
I have a question. I’m starting a tumbler business. What would be the sizes for a 30 oz skinny tumbler ?
I am having issues why my wording is coming out backwards on my tumbler? Ughhh?
Did you mirror the image?
You have to mirror your image
I know I can do this. Your presentation was simple and informative. Thank you
What was the printer information?
What are you meaning?
i have a problem with my green turnsyellow when pressed and my blue dont press .it stays on the paper . what can i do . is it my ink . i have used all types of sub paper.i have tried different temp and time .i even change up on color setting. Help
It sounds like it may be your ink. It's a mess and a challenge removing ink.
I need this wrap... beautiful work
I keep getting ghosting and my black is not dark enough. Any suggestions?
What size paper do you use?
8.5 x 11
Do you have a video doing sublimation shirt?
omg thank you so much i been try to figure out how to do thing for a minute now. your video just helped me a lot. Thank you
I am so glad that I found your video! You are the Best!
What software addition do you use? My silhouette studio does not allow me most of the stuff you have.
Hello where I could print my picture
What kind of printing paper is being used?
ASUB
Or HTVRONT
Came out really nice. 👍🏽
Super cool!! We have those blanks too! Love your works!🥰
Thank you lots 😊
I’m gonna have to get silhouette bc my design space doesn’t allow me to print a large image to fit a tumbler. Saving this and will try soon. Thank you
No problem it makes it easier
Which laptop exactly can I use ?
I have a hp that’s not a Chromebook you can us Mac
I have a tumbler press, Epson printer 2800 and the same sublimation paper as you and it’s not printing
Very easy to follow. Is it possible to sublimate the large cappuccino mugs?
Yes make sure you tumbler press is compatible for it
Lord to protect beautiful
My printer settings don’t show the same at all. I did step by step. But once I hit print it don’t give me the same options. Also I did sizes exactly how you said but it came out too short. I need help
Try going into your settings then printer and devices and select your printer the try changing the preferences if that doesn’t work once you select print for your image the print option box pops up you can try changing there. It has to be there if you followed step my step. Also with that size you have to cut exactly on the line not to much or it will come up short. I have that issue too sometimes and I personally think that some tumblers are 20oz but differ in sizes sometimes so you can also go up in size. Try the size 9.33 or 9.34 x 8 this should give you extra to work with. Let me know if you still need help. 😊
I watch your video the other day as I was looking for information on sublimation tumblers. Yours has been the best that I’ve watch. Thank you very much for sharing John Figueroa.
Glad it was helpful!
Thank you for your help, could I ask what kind of PC you use? I think the pc I have doesn’t have the same printer settings and it might be because I need an updated pc.
Yes I have an hp it’s not a Chromebook
Loved your video...by far the best one I have watched. Made my 1st tumbler but I still had some imperfections but i loved how it turned out. I will watch again and try again so i can do better. Thanks so much for this video. 🥰🥰🥰
Only watched onece.. and did my first tumbler perfectly!!!
👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾 HAPPY TO HEAR THAR
Bought all the equipment the other day. Have to load the ICC file then going to print my first tumbler. Great job teaching
Awesome! Thank you!
I’m going to try your tape method tonight, I’m nervous to skip taping the top and bottom but you’ve convinced me to try! Thank u 😊
I promise you don’t need all that tape 😂
Thank you! Your videos make sense and my very first cup turned out perfect ❤
Wonderful!
Hey love I started my tumbler business and have been having an issue with the image not transferring. To the tumbler. I set my heat press to 385 for 55 sec then 30 seconds and when I unwrap it nothing is on the tumbler , the paper turnt brown and hot so I know the heat press machine works . I have tried different temperatures and double wrapping it with butcher paper. Do you know what causes this or how it can be fixed I’m running out of options and I don’t want to give up on my business
Ran across this video and followed and I've made 3 tumblers since.. I've been playing around with the length 8.0 - 8.1 - 8.2..
I just tried your method. I’m so happy! Thank you so much for your helpful tips!!! Yay❤
You are so welcome!
I tried the way you said to tape the cup. It turned out perfect the best cup I've made so far. I can't even find the seam.❤
This makes me happy.
How does copyright work for something like that design you have? Would you be allowed to sell it since its not the exact starbucks logo or could they still get you for copyright since everyone knows what it is?
Loved the video!!! But I didn’t understand much the white border taping part ?
I tried using this video to help me become more familiar with the steps of doing this but, when I push the print button and I’m at the screen where u can change the settings, my screen doesn’t show me as many details as this lady’s screen does.
Go into your computer settings. Go to printers and scanners. Then go to your printer. Then follow her directions from that point.
I have a hp laptop that I’m working from setting are different across different devices you have to find where yours is located maybe go to your computer settings and try changing the preferences under your printer there
❤❤❤❤
Best explanation step by step and it came out perfectly n it was my first time making one
Happy to hear that!
Wow beautiful, i should start a business already😂. Please i would like how this could be done on shoes.
Ugh. I don’t any of the silhouette devices, what can I do alternatively for free or a cheap price?
You don’t need silhouette devices to work that program I don’t have silhouette devices either lol
Thank you. I got it now, my computer was acting slow and wouldn’t download silhouette
Nicely done. I just started doing this and your tips answered a lot of the questions I had. I also read the comments and a lot of the questions people are asking you actually answered in the video, I think they should rewatch and listen to the things you said. Great work.
Hey, what's the name of the app you like to use? Again other than Photoshop?
So beautiful, can you do more videos like this one?!
Yes of course!
Hi can I use any printer or does it have to be a specific printer to do these tumblers ?
I am 65 yes and your video helped me to sublomate perfectly. Thank you. Please post more videos
Perfect settings! Thank you so much!!!
You're welcome!
I love the way you showed all the items you will need. Very structural on your presentation. Awesome! Will be trying every step given...
What ink do you use for your sublimation
It’s called Tonha Sublimation ink on amazon
Wow thank you thank you this the best tutorial
I been thinking about getting into this as a hobby but didn’t know where to start.
Wow this helped me a lot..thank you very much. I'm so new to this
How much do you charge for your tumblers?
20-25
I'm having the same issue. I unlocked and tried to change the width and the height and it would back to its original size. I'm stuck
I dont have them printing features
What is the app you use
Silhouette studio
@@sharenalatrese_thecraftgoatdo I have to purchase the equipment or what do I do to use silhouette?
Best video yet! Thank you!
Wow, thanks!
Please send the App name for miroir
You gave great instructions, I can’t wait to try it out!
Please do!
She's the best. From many I've seen I LOVE the way she explained everything well 💕
That came out absolutely perfect 🥰
Thank you 😊
@sharenalatrese408 you're welcome and thank you for sharing
That’s a beautiful cup yes 🎉
Thanks that’s a great tip
Thank you glad I could help 😊
Excellent class❤️