Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Done this on a beko washer/dryer the other day I got for free as they wanted rid of it and got a new one. it had damaged door seal so I replaced it so I could sell it which I did last night, but Never in my life have I had so much trouble getting on a door band as I did with the beko brand it felt way to small but I took it off so knew it had to go back on. Me and a friend with some thin screwdrivers stretched it and took the both of us to get it on. Will definitely invest in one of these tools next time.
The simplest hacks are the best @NV-ul3mc please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Glad I could help mate. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Hi Paul, thank you for al the tips. I have a quick question, how do you level a washing machine after it's under kitchen worktop? there is no access to put a level on top.
You would make sure the floor is level first, if the floor is higher at the back than the front, you would adjust the machine befor you before you slide it in
Jesus Christ! 20 years in industry and struggling every time with this bloody spring especially one on the tub... Pliers ordered!!! (on eBay slightly cheaper) . THANKS MATE!
You never stop learning mate I've done a whole playlist on these lgs I like the new machines, especially when they're putting the part numbers on the components. @danielmielnik9000 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
I am happy to help you mate👍 Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
You're welcome mate! I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
I'm very glad to hear that it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand. I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Glad you liked it! The simplest hacks are usually the most beneficial @deebee3901 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thanks a lot for all the info you are sharing.... Could you please make a video on the connections to the main board for a bosch or siemens washing machine... There are so many connectors and its confusing
Glad you enjoyed the video, but with regards to the Bosch that would be an impossible one for me to do because I would need to do videos on every different type of circuit board and there are so many
@@How-to-repair oh... I understand... But is there a pattern say most of the boards have ay the heater which is a two wire connector, the door lock would be a 3 wire connector etc? is there some hack to figure out which one is what in case we dont take a picture of it before disassembling?
Thank you! 😄 What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @tahirmahmood3597 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Fantastic hack. I was on the verge of going crazy.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Done this on a beko washer/dryer the other day I got for free as they wanted rid of it and got a new one.
it had damaged door seal so I replaced it so I could sell it which I did last night, but
Never in my life have I had so much trouble getting on a door band as I did with the beko brand it felt way to small but I took it off so knew it had to go back on.
Me and a friend with some thin screwdrivers stretched it and took the both of us to get it on.
Will definitely invest in one of these tools next time.
Thank you for the tip! It is indeed frustrating when fixing these bands!
Happy to help! The simplest things are always the best
Fantastic hack! Cable ties and a spanner...I can't believe it worked!! Thanks for sharing, as I was just about to give up and call an engineer.
The simplest hacks are the best @NV-ul3mc please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thank you for the advice really helped with the rear spring for my Hotpoint Washing Machine. I had so many troubles with that inner spring!!!!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Mate, you saved me. Amazing.
Glad I could help mate. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Hi Paul, thank you for al the tips. I have a quick question, how do you level a washing machine after it's under kitchen worktop? there is no access to put a level on top.
You would make sure the floor is level first, if the floor is higher at the back than the front, you would adjust the machine befor you before you slide it in
Jesus Christ! 20 years in industry and struggling every time with this bloody spring especially one on the tub... Pliers ordered!!! (on eBay slightly cheaper) .
THANKS MATE!
You never stop learning mate I've done a whole playlist on these lgs I like the new machines, especially when they're putting the part numbers on the components. @danielmielnik9000 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Saved my life
Tysm.
I am happy to help you mate👍 Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Great tip, thank you.
Holy crap. Thank you!
You're welcome mate! I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
The clamp just came out on mine thanks for the tip.
Hi thanks a lot for your comment and I'm glad it helped. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Amazing I did it.
Thank you . ❤Thank you Paul
I'm very glad to hear that it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.
I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Hi can you add a sponge filter before the impeler? Many thanks
Excellent!
Glad you liked it! The simplest hacks are usually the most beneficial @deebee3901 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair already subscribed. We love you in Australia!
Thanks a lot for all the info you are sharing.... Could you please make a video on the connections to the main board for a bosch or siemens washing machine... There are so many connectors and its confusing
Glad you enjoyed the video, but with regards to the Bosch that would be an impossible one for me to do because I would need to do videos on every different type of circuit board and there are so many
@@How-to-repair oh... I understand... But is there a pattern say most of the boards have ay the heater which is a two wire connector, the door lock would be a 3 wire connector etc? is there some hack to figure out which one is what in case we dont take a picture of it before disassembling?
Love a good Hack!! 👌
I've been doing this for over 40 years, and I only learnt about it recently
Thank you
Great job ❤
Thank you! 😄 What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @tahirmahmood3597 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
👍👍👍👍👍
Woow , I had to sit down for 30 minutes to put that ring , but ended up frustrated
I am going to find you and I am going to give you a massive hug. I was about to lose my actual mind 🫠
Actually, I take it back. It doesn’t work either 🫠