Fixing Faulty Pressure Switch - Fresh water pump RV / Campervan

Поділитися
Вставка
  • Опубліковано 24 сер 2024
  • Diagnosing and fixing a faulty pressure switch on a Seaflow water pump used in a campervan, motorhome, RV & Boat, the same concept applies to most water pumps including most Shurflo units. Watch till the end to see the whole process.
    Disclaimer:
    This video was created for informational and educational purposes only. I cannot guarantee against the improper use or unauthorised modifications of this information. No liability for property damage or injury incurred as a result of any of the information contained in this video is assumed. Use this information at your own risk. I recommend safe practices when working on any vehicles and with tools seen or implied in this video. You are using the information and automotive parts shown in this video solely at your own risk. It is not intended to be a substitute for the professional advice of a service centre or mechanic.

КОМЕНТАРІ • 24

  • @kennyshepard3028
    @kennyshepard3028 2 роки тому +3

    Mine is stuck on after I let it run for several minutes to empty my tank following a trip. Assume it to be the same issue. I purchased a new one for like $35 but I plan to fix the old one like this to have a refurbished spare. Cheers!

  • @jtownsager
    @jtownsager Рік тому +1

    Thanks. Just what I needed.

  • @gerardomontoya2698
    @gerardomontoya2698 3 роки тому +1

    Thaks a lot for your explanation... (not Indi),... Congratulations from Sinaloa, in México country

  • @jaybonano661
    @jaybonano661 4 місяці тому +2

    Where did you sourced the pressure switch?

    • @AutoBuddynz
      @AutoBuddynz  4 місяці тому +1

      It comes with the new water pump

  • @gerardomontoya2698
    @gerardomontoya2698 3 роки тому +1

    In mi case I change that spring from the switch (Was working from on to off very fast, till I made that adjustment), then I began to adjust that screw... (clock wise, in short steps.. Till stars working that it usted to be)

  • @paulanthony9280
    @paulanthony9280 2 місяці тому

    Nice video but you talk too quietly.

  • @modataller1616
    @modataller1616 Місяць тому

    Dime por favor, si es para 12 v

  • @sunnindawg
    @sunnindawg Рік тому

    So did it work? Part 2.

  • @ThomastheJokester
    @ThomastheJokester 2 роки тому +1

    Need help re wiring to new pressure switch

    • @AutoBuddynz
      @AutoBuddynz  2 роки тому

      Depends on what pump you have, but most of the time its wired in series so it does not matter which way the wires go, as its just a switch in-between a circuit.

  • @timrice5342
    @timrice5342 2 роки тому +1

    Can't I just wire the motor up direct? All I'm using the pump for is a transfer pump.

    • @AutoBuddynz
      @AutoBuddynz  2 роки тому +1

      Yes you can if your just using it as a transfer pump. Do note the run time of your particular pump as some cannot handle being on continuously for too long.
      The pressure switch is there to prevent pipes blowing off or rupturing from excessive pressure and to cut off the pump automatically.

    • @timrice5342
      @timrice5342 2 роки тому +1

      @@AutoBuddynz thank you. 21 min at a time. Just long enough to transfer water from truck to RV.

  • @DIYjust
    @DIYjust 4 роки тому +3

    Where can I buy a pressure switch? Please give me the link.

    • @AutoBuddynz
      @AutoBuddynz  4 роки тому +6

      www.amazon.com/12PAack-Action-Button-Microwave-MXRS/dp/B083C113YL/ref=sr_1_2?dchild=1&keywords=micro+switch&qid=1600115132&sr=8-2

    • @AutoBuddynz
      @AutoBuddynz  4 роки тому

      There is an extra terminal which can be removed if it does not fit in the housing (link above)

    • @DIYjust
      @DIYjust 4 роки тому +1

      @@AutoBuddynz Thank you very much.

    • @AutoBuddynz
      @AutoBuddynz  3 роки тому

      @@DIYjust No problem

  • @ThomastheJokester
    @ThomastheJokester 2 роки тому

    Willy his fix the issue of mine sparking up