How To Make CARBON FIBER Fin Blades

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • How To Make CARBON FIBER Fin Blades? EASY!
    Just follow the steps from the video!
    Made a DIY video for all people who want to make custom fin blades at home with no special equipment.
    Used Materials:
    200g/m2 Carbon fiber - 1m2
    200g/m2 Fiberglass - 3m2
    Very basic Resin - 1L

КОМЕНТАРІ • 97

  • @hungrose2k
    @hungrose2k 2 роки тому

    few day ago i make a fin carbon fiber with vacuum! but i'm fail. and i think i can make fin with your idea verry easy . thanks so much!

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому +1

      Hi! What went wrong with vacuum? Just wondering as this will be my next project.

    • @hungrose2k
      @hungrose2k 2 роки тому +1

      @@IlyaYarshou That’s my first project i’m forgot to apply the coating and it stuck to the glass surface😢. you should make a logo on the fins I think it's pretty cool. I will follow your new project.

  • @chadiving3380
    @chadiving3380 День тому

    Steps to empty each floor How many minutes must be separated? Or available to each other

  • @Womenlovefishpics
    @Womenlovefishpics Рік тому +1

    Ive seen people use a roller to get the bubbles out

  • @odysseyalternative
    @odysseyalternative Рік тому +1

    That was awesome man! 👏🏼

  • @mauriziogiasan4411
    @mauriziogiasan4411 2 роки тому +2

    thank you . why didn't you use all carbon instead of fiberglass?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому +2

      Hey! There were several reasons for that:
      1. Fiberglass is cheaper
      2. Less chance to brake it while traveling as I have a basic diving travel bag only.
      3. Well known brands are doing combined materials fin blades so I did not think much as it was a "pilot" version of mine.

  • @ALBERTO-dp6iz
    @ALBERTO-dp6iz Рік тому +3

    Hi, I want to build a pair of carbon fins but I have a doubt about the amount of resin to use. The fins will be 75cm long and 20cm wide...The mold will be 100cm long and 40cm wide.
    I will use the vacuum technique. There will be 5 or 6 carbon fiber layers. Do you know how much resin I have to use in total or for each layer how much of A and how much of B? On the resin I bought it says 100:25 A:B
    Thank you very much

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      Hi. I learned this from @ajhartmanaero.
      For the vacuum bagging I would suggest you to cut the material (all layers) and check the weight of it. After that multiply the weight to 0.75 and you will get the amount of the mixed resin.
      So if the carbon weight will be for example 250gr*0.75=187.5rg of mixed resin.
      Now look your epoxy is 100:25=4:1.
      So now 187.5gr/1.25=150gr of epoxy.
      150gr of epoxy+37.5gr of hardener. = 187.5gr of mix.
      You need to take attention to the
      That is what I used so I hope that will be helpful for you.

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      Also, You can use this formula: Fabric weight *Surface area(in meters)*number of plies. Don't forget to add some grams for tubes.

  • @chadiving3380
    @chadiving3380 День тому

    What kind of fabric is the last sheet? Is it the nylon cloth used to make screenprinted bloks ?

    • @IlyaYarshou
      @IlyaYarshou  День тому +1

      Hi, I did not wait between layers at all. Was mixing small amount of epoxy. The last layer is pure 50mg nylon.

    • @chadiving3380
      @chadiving3380 День тому

      @@IlyaYarshou Thank you very much.l'm learning how to use it myself.

  • @doctorspearo
    @doctorspearo Рік тому

    Good job

  • @thedeerco
    @thedeerco Рік тому

    Thank you for sharing with us
    I see that you have omer shoes how did you fit the fins inside it

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      Hi! That was a bit tricky task. Rubber T-rails are not really sliding in the rubber footpocket. Not sure if that was the best idea but the regular olive oil on both footpocket and the t-rail helped. Anyway that was not easy.

  • @jpslupik
    @jpslupik Рік тому

    any last comments on changing anything before i start? any details would be much appreciated. Ill document it also, to add to this project as a whole, for anyone interested. so we have the best result for people doing it based off these trial videos. unsure of weather to use carbon on the inner layers too

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      I'll be doing another pair for my wife shortly using vacuum bagging as I have built a vacuum pump (the last video on the channel). But I will be using 160gr fiberglass to make it a bit softer for her. Go ahead man! Good luck!

  • @antoxa3107
    @antoxa3107 2 роки тому

    Получилось очень хорошо 😁

  • @thuyan6890
    @thuyan6890 Рік тому +1

    What kind of binder do you use to join the carbon and fiberglass sheets together? Could you please explain to me?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +2

      No binder was needed. You just put one sheet to another. The resin itself is glueing it up.

    • @thuyan6890
      @thuyan6890 Рік тому

      @@IlyaYarshou I see each layer overlap, you have to apply an adhesive layer. What substance is it?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +2

      Look, I pore resin manually on each layer which make the carbon/fiberglass stick to each other and it does not move once I place another layer.

    • @thuyan6890
      @thuyan6890 Рік тому

      @@IlyaYarshou What is the binder in the white cup you used to apply each layer?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      @@thuyan6890 This is the regular resin+hardener for laminating from a Polish company Royal Resin.

  • @user-gc8if5ts3l
    @user-gc8if5ts3l Рік тому +1

    hi, do you really need to burn the glass fiber? for your final product? too stiff?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      For me it is perfect (used 200gr carbon and fiberglass) but for my wife I'm doing 160gr to make it softer. I'm always burning out wax from the fiberglass (Just learned that 15 years ago when I was making еру crossbow replicas) to make the adhesion better.

    • @jpslupik
      @jpslupik Рік тому

      u think its necessary to burn off from carbon sheet. i have never done that didnt know it was a thing. @@IlyaYarshou

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      @@jpslupik definitely not necessary for carbon as the factory does not use wax and oil in the production process for carbon as it is used for fiberglass.

  • @Luis-je7hz
    @Luis-je7hz Рік тому +1

    How did you connect the 2 glass and whats between them?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      I have glued up two pieces of glass with a silicon glue. I had to do it for every fin blade as the glue stayed on the resin. I would suggest to put a piece of plastic bag to cover the glue but it is up to you.

    • @Luis-je7hz
      @Luis-je7hz Рік тому +1

      Also last question. Whats the exact name of the nylon im actually trying to do it right now but the im having a hard time finding that “nylon sheet”

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      @@Luis-je7hz Search for "Peel ply". I was using the one with red lines. It is quite cheap and works great.

  • @AtasubSpearfishing
    @AtasubSpearfishing 8 місяців тому

    resiba epoxy ou polister?

    • @IlyaYarshou
      @IlyaYarshou  8 місяців тому

      Sorry I could not understand the question.

    • @AtasubSpearfishing
      @AtasubSpearfishing 8 місяців тому +1

      @@IlyaYarshou Did you use epoxy resin or polyester? low or high viscosity?

    • @IlyaYarshou
      @IlyaYarshou  8 місяців тому

      @@AtasubSpearfishing Epoxy resin with medium viscosity (for lamination).

  • @mitchsvlogs5361
    @mitchsvlogs5361 Місяць тому

    Hi man, what weave was the carbon

  • @bethranyaqub5460
    @bethranyaqub5460 Рік тому +1

    𝗪e have the same brand 𝗽𝗿𝗼𝗱𝘂𝗰𝘁, Ok I will try to make 𝗶𝘁. 😉👌

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      Wszystko kupowalem na Allegro :) Powodzenia!

  • @andrzejfabianski4948
    @andrzejfabianski4948 Рік тому

    Easy job. Anyway title was about CARBON fiber blades, not mixed with glass fiber. IfI would buy it from You I'm expecting product as described ;)

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      Will be making more stuff soon. Sorry for the delay.

    • @yiucycle
      @yiucycle Рік тому

      A lot of composite product don't use just one type of material. Plus as other videos have indicated all carbon layup will make the blade too stiff. His title is still correct, since he didn't said "100% or all carbon". Since he is making it for himself and not selling it, he don't need to deal with those a-hole customer.
      Love the your blades, I think I will make one too, but probably will vacuum bag it to get a bit better resin ratio.

  • @AlesCar-tp4et
    @AlesCar-tp4et Рік тому

    do you have to treat the fiberglass with heat? my friend warned me that bubbles are a big problem, this is where the fin cracks under heavy load. look's nice

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +2

      Hi! Nope, all was done at about room temperature. I used this blades for 3 months and the only problem I have noticed was the wrong glue I used for the rubber t-rails.

  • @belmyrosario4413
    @belmyrosario4413 2 роки тому +1

    hello greetings, what type or brand of resin did you use, I have seen several videos doing the same thing and they say that it must be west sistem epoxy resin, but in my town it is not possible to obtain,
    what do you recommend?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому

      Hi! Look, I had the same issue with ordering West System epoxy. The price was very high (around 60euro for 1l of epoxy with hardener) +delivery+custom tax. My experience of work with basic cheap epoxies told me that it is just not worth it. I used Royalresin clear epoxy (15 euro for 1l canister) and quite happy about it. Will be using it also for vacuum infusion in the next video doing carbon fin blades for my wife’s fins.

    • @belmyrosario4413
      @belmyrosario4413 2 роки тому +1

      @@IlyaYarshou thanks for the information I am very grateful, I will look forward to the infusion video:
      I think I'm going to wait for the infusion video to make mine

    • @belmyrosario4413
      @belmyrosario4413 2 роки тому +1

      @@IlyaYarshou What advantage is there in doing it by infusion?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому

      Mostly it is about product quality. The main problem I had doing manual resining was air bubbles on the gloss surface (sometimes very big ones). It was not a problem for me as I was doing it for myself but you always want a perfect product, right? :)

    • @belmyrosario4413
      @belmyrosario4413 2 роки тому +1

      @@IlyaYarshou I understand clearly. quality is very important
      Thank you very much for answering and clearing my doubts👍

  • @mitchsvlogs5361
    @mitchsvlogs5361 Місяць тому

    Hi man, crazy work. How much did it cost you to make them.

    • @IlyaYarshou
      @IlyaYarshou  Місяць тому

      Around 50 EUR in total. 1 thing is that I was suggested to use 3406 Cyanoacrilic glue for t-rails as the regular superglue I was using worked for 1 season only...

    • @mitchsvlogs5361
      @mitchsvlogs5361 Місяць тому

      @IlyaYarshou oh okay, do you mind telling me what types of glue you used and poxy and carbon Fibre layers and where one can buy it. Really liked your video and want to try it myself. Thank you

    • @IlyaYarshou
      @IlyaYarshou  Місяць тому +1

      @@mitchsvlogs5361 I have used a regular epoxy resin for laminating (just cheap one from Polish brand). 1/1 200gr carbon fiber from the internet store ( on Allegro). The glue for t-rails for shoes (don't ask why) I have bought in a local store on Tenerife.

    • @mitchsvlogs5361
      @mitchsvlogs5361 Місяць тому

      @@IlyaYarshou thank you very much, safe diving

    • @mitchsvlogs5361
      @mitchsvlogs5361 Місяць тому

      @IlyaYarshou what did you put in the search bar for the carbon fibre layers. I can't seem to find it.

  • @Whitearmada
    @Whitearmada Рік тому

    Hello. Tell me, please. I want to make a full carbon fin blade. 1 meter (40 inches) long. What density of carbon fabric should be chosen to make the blades of medium stiffness?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      160-200gr. Mine was 200gr.

    • @Whitearmada
      @Whitearmada Рік тому

      @@IlyaYarshou Большое спасибо.

  • @marchanzigmunddalen.1250
    @marchanzigmunddalen.1250 2 роки тому +1

    Can I also use 200g fiberglass at first and 2nd layer?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому

      You can use 200g fiberglass for all layers with no problem. You can add a color pigment to resin to get rid of white/milky fiberglass color.

    • @marchanzigmunddalen.1250
      @marchanzigmunddalen.1250 2 роки тому +1

      @@IlyaYarshou thanks! Gonna try making one next week, by the way what brand of epoxy resin did you use?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому

      It was Royal Resin Clear. 1L was more than enough. The price was about 15$.

    • @marchanzigmunddalen.1250
      @marchanzigmunddalen.1250 2 роки тому

      How was the fins holding?

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому

      @@marchanzigmunddalen.1250 What do you mean?

  • @syedmuhammadhamza7608
    @syedmuhammadhamza7608 Рік тому +1

    Hi can you make customize for me?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому +1

      It depends on your needs and expectations. I´m creating a new pair for my wife and a bit stuck with a vacuum pump to make the quality the best I can. So a new video is coming within a month I hope.

    • @syedmuhammadhamza7608
      @syedmuhammadhamza7608 Рік тому

      @@IlyaYarshou when you made it so please let me know and share cost so i will be your first customer

    • @syedmuhammadhamza7608
      @syedmuhammadhamza7608 Рік тому

      I want free diving fins for spear fishing carbon fins

    • @syedmuhammadhamza7608
      @syedmuhammadhamza7608 Рік тому

      Medium Blade for Carbon Fin Foot Pocket size 42

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      @@syedmuhammadhamza7608 Sure thing. Do you have your foot pockets already or you need everything?

  • @jpslupik
    @jpslupik Рік тому

    im making some, thoughts on how much shorter the layers should be based on urs? how many layers u think would be perfect?

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      Hi! For me this layers quantity was perfect. It was even a bit softer than Leaderfins medium carbon fin blades. You can use 160gr carbon instead of 200gr (to make it softer/thiner) once you think it can be uncomfortable for you.

    • @jpslupik
      @jpslupik Рік тому

      @@IlyaYarshou ive got 200gsm carbon, any last comments on sheet design, been lookinggg at diagonal corner strips or a. Triangle inner layer for a bit of subtle performance. thanks mate appreciate it

  • @deewaagiakoko8234
    @deewaagiakoko8234 Рік тому

    Look very nice ,but very hard to understand !

  • @Adhdad1
    @Adhdad1 2 роки тому

    Sorry mate, I’ve watched this a few times now, and am still puzzled as to your “1st layer”, and the gloss finish you end up with. Are you painting resin on to a clear gloss product? Are you painting resin on clear plastic then adding the carbon sheet? Must be my adhd, but I just can’t figure it out. Awesome idea, can’t wait to try it. Thanks so much.

    • @IlyaYarshou
      @IlyaYarshou  2 роки тому +1

      You need to put wax on the glass surface and polish it (I have done it 6 times). The whole sandwich looks like(bottom to top): glass-wax-resin-carbon-resin-fiberglass-resin-fiberglass-resin-fiberglass-resin-carbon-resin-nylon. No coating resin, no painting. You are getting the glossy surface from one side at once. The only problem I got was the air bobbles on the gloss surface as I did not have a vacuum chamber to remove air from resin. Hope that answers your question.

    • @jpslupik
      @jpslupik Рік тому

      a quick fire torch gets rid of bubbles@@IlyaYarshou

  • @rogamingz206
    @rogamingz206 Рік тому

    what twill are you using ? we need a vacuum video thnx ^_^

    • @IlyaYarshou
      @IlyaYarshou  Рік тому

      Hi! I was using twill 2/2 spread. For the next one I bought 1/1 but will see if there will be any difference.

    • @rogamingz206
      @rogamingz206 Рік тому

      @@IlyaYarshou the 2x2 will do as i have observed

  • @baghovicizet2957
    @baghovicizet2957 Рік тому

    sorry, where do you buy the side rubber from?

  • @ziegfredpanen6623
    @ziegfredpanen6623 2 роки тому

    Bro is that a wooven carbon cloth?

  • @carlosalexandre3807
    @carlosalexandre3807 Рік тому

    👏👏👏💯💯🇧🇷