He looks great! Maybe a little "juicy". His delts, traps, and forearms are suspiciously large. More power to him. He has decided to get healthy and it shows. He looks 100% better
@@christiandulaney1638 At his age, taking test is pretty necessary if you do it right legally with a doctor that specializes in that kind of therapy. Low test cause depression. Lot of depression going around and they aren’t checking their hormones first. Instead they’re given antidepressants. Unfortunately.
all companies make turds. what makes a company a good company is the ability to admit mistakes and fix them. hopefully they take a close look at this to see if it is a one off or something to be concerned about.
I've been wanting to buy a mk47 for while. But I would rather have original if it's that much tougher. The forward charging handle & folding stock or brace is awesome. But your only gonna shoot it with stock deployed & you don't run the charging handle that much unless you only using 5 -10 round mags. So I want which ever is the real mutant! . Kinda need see the meltdown for that. I haven't seen anyone run a dissent on a mg lower though have you?
@@maxcole3930 It didn't fall apart . The handrail washer was likely not tightened down before shooting . Once it came loose it stripped the thing . So the UA-camrs likely didn't check it first
@@cramerlong2276well it happened twice so obviously he checked it the second time , he installed it the second time himself. Kind of a bummer something that expensive doesn't run right out of the box. And I'm not a CMMG hater.
@@cramerlong2276 Sounds like you didn't even watch the video. It broke twice. One out of the box, the second time after he reinstalled the new part, which I'm sure he tightened up after. It's a $2400 firearm, it shouldn't be this way out of the box. It shouldn't be this way after replacing the part either.
Theres gotta be a way for a company to integrate a LRBHO feature into AK mags to work congruent with the AR bolt catch design. If that happens, it will really bridge the gap. CMMG, make it happen.
I bought one in the Titanium finish. I installed a buffer tube adapter and put on a Magpul stock - far more stable than the cheesey plasticy side folder. I run iron sights only so the long section of rail gives you a decent sight radius. Only issue is a sticky bolt after 40 or so rounds. Probably due to extractor band being a little oversized. Got a spare BCG on the way just to have on hand.
Im really starting to consider talking to my doctor about trt. So many dudes using it to increase longevity and improve their workouts with what appears to be fantastic results.
I just received the new MK47 Resolute that came with a bolt stop/release installed. This is not the Dissent! It’s not a last round bolt hold open due to the AK magazine but it’s still a good feature for those that were complaining that the platform didn’t come with one.
I will say this to hopefully draw more attention to this fact. You have an AR-15 pattern rifle with a bolt release on it. If you took an m70 ak magazine with a high follower on the magazine then why can't someone modify the receiver on one of these hybrid rifle lowers so that bolt release interfaces with the magazine and then you could drop the bolt on last round. The rifle could still use regular akm magazines in addition to m70 magazine or even a proprietary magazine that allows for a higher magazine tab to interface with the bolt stop or whatever technical term locks the bolt to the rear on interfacing with the magazine. It is my dream to be a unicorn operator on the range and put 200 rounds through a rock and lock with a last round bolt hold open (Yes I know it exists on the FAL, but FALs use bullets that are double the cost) and then get bored and go home after getting a decent enough group at 20 yards
I love seeing good people go from fat to ripped... i wish more people would take the initiative in life to do so, it just makes everything in life easier.
Got mine in 3 days ago.went out today and gave up after 150 rnds. Failure to feed every 3 to 5 rounds. I used 5 different magazines 6 different ammo types and manufacturers. So disappointed. It was smooth and accurate just not reliable for anything. I’m gonna try again before it hits the sale block though.
Wow Eric, you have really lost some weight buddy. Great job sir! I wish I could motivate my ass to get back in the gym, but after working 12 hour days I'm just tapped at the end of the day.
Do you think the Dissent mk47 or dissent 9mm is worth the price increase over the standards ones? It's roughly a 400-600 dollar difference depending on which models. the side folding stock or brace option is awesome but realistically your gonna have them deployed when shooting. I wanna buy a cmmg 9 having hard time deciding weather I should build my own 9mm banshee with bolt & barrel kit or get the Dissent 9mkg? Any suggestions? I built my own cmmg banshee dedicated 22lr pistol & it saved me a lot of coin! Is the Dissent with the cost!??!
After seeing One Come apart at about 350 rounds comma sent the part at about same round Count the Handguard was Moving Forward with a Gap That is an issue , i would like to see someone else Put a lot of Rounds through it, and see If it was just one , But having the same Problem around 350 rounds ,I will have to see that problem Permanently Fixed ?
It looks like you can not sling this rifle ( no attachment point on the rear). Another YouTub reviewer had the hand guard retaing lug shear off and the hand guard slide forward when firing. Lets talk about AR compatibility of parts?
This rifle, like the original MK-47 (aka the Mutant) uses an AR-10 sized bolt in a modified carrier. It has never had the problems that some hogged out 5.56 bolts had.
@@greenbean7853 I kinda want a scope on my marlin 30-30 but it's a great gun and has a waffle top and is nice to look at without a scope on it. I think I'll get a vortex for my 30-06 instead. I've been wanting to get more into western revolvers. Have a great day man! Thanks
Why are so many manufacturers pin and welding these barrels? It’s a turn off in my opinion for suppressor owners with cans that don’t work with their muzzle device of choice.
Was super excited to see these come out! These are the perfect adaptation for people who invested in AK mags and 7.62x39…don’t feel bad, I’m talking about me as well lol
Dang bro you are getting in great shape. Nice job.
What I want to know is Natty or TRT? At his age I wouldn’t blame him if it’s TRT not taking anything away from him.
Great video. Also, great job on your fitness Eric I'm glad you're getting after it 💪
Lookin healthy eric. Can definitely tell you been lifting. Got them army spec pythons on ya
Dang homie you looking good glad to see you getting in shape. Awesome rifle I'm buying one now
I said he was looking r i p p e d an I think YT deleted the comment 🤔
He looks great! Maybe a little "juicy". His delts, traps, and forearms are suspiciously large. More power to him. He has decided to get healthy and it shows. He looks 100% better
You aint kidding. He's starting to look a bit like Chuck Liddel. Georgia Redneck Chuck Liddel with the dip in, but still Chuck Liddel 😆
Ooooooohhhhh yeah!! Dig it?
@@christiandulaney1638
At his age, taking test is pretty necessary if you do it right legally with a doctor that specializes in that kind of therapy.
Low test cause depression. Lot of depression going around and they aren’t checking their hormones first. Instead they’re given antidepressants. Unfortunately.
Awesome Eric. Keep the range videos coming!
Tactical Considerations did a review on this and the rail came off while shooting it. Sent it back and had it fixed and it did the same thing again.
all companies make turds. what makes a company a good company is the ability to admit mistakes and fix them. hopefully they take a close look at this to see if it is a one off or something to be concerned about.
Sounds like their design was strong enough for a pistol round but failed with rifle caliber.
We need see a meltdown of the Dissent mk47 to see if it is as tough as the original!!!
Agree, I just saw a video of one with a broken part even after getting replaced by CMMG.
I've been wanting to buy a mk47 for while. But I would rather have original if it's that much tougher. The forward charging handle & folding stock or brace is awesome. But your only gonna shoot it with stock deployed & you don't run the charging handle that much unless you only using 5 -10 round mags. So I want which ever is the real mutant! . Kinda need see the meltdown for that. I haven't seen anyone run a dissent on a mg lower though have you?
Just saw one fall apart yesterday...twice, on Tactical Considerations. Hopefully they figure that out.
I saw that too, it could just be a fluke thing with a single part out of spec? Time will tell if it is a real issue!
@@maxcole3930 It didn't fall apart . The handrail washer was likely not tightened down before shooting . Once it came loose it stripped the thing . So the UA-camrs likely didn't check it first
@@cramerlong2276well it happened twice so obviously he checked it the second time , he installed it the second time himself. Kind of a bummer something that expensive doesn't run right out of the box. And I'm not a CMMG hater.
@@cramerlong2276 Sounds like you didn't even watch the video. It broke twice. One out of the box, the second time after he reinstalled the new part, which I'm sure he tightened up after. It's a $2400 firearm, it shouldn't be this way out of the box. It shouldn't be this way after replacing the part either.
@@IconTacticalthat's the first time I've ever seen someone have a issue with a CMMG gun tho to be fair. I think it was a fluke. I could be wrong tho
Theres gotta be a way for a company to integrate a LRBHO feature into AK mags to work congruent with the AR bolt catch design. If that happens, it will really bridge the gap. CMMG, make it happen.
The MK47 is what got me into CMMG
Look like you’ve gotten in shape brother. Nice work on training.
Just saw a clip of you attending the NAAGA convention 2023, sitting a table, shaking hands. Respect.
I bought one in the Titanium finish. I installed a buffer tube adapter and put on a Magpul stock - far more stable than the cheesey plasticy side folder. I run iron sights only so the long section of rail gives you a decent sight radius. Only issue is a sticky bolt after 40 or so rounds. Probably due to extractor band being a little oversized. Got a spare BCG on the way just to have on hand.
Im really starting to consider talking to my doctor about trt. So many dudes using it to increase longevity and improve their workouts with what appears to be fantastic results.
I just received the new MK47 Resolute that came with a bolt stop/release installed. This is not the Dissent! It’s not a last round bolt hold open due to the AK magazine but it’s still a good feature for those that were complaining that the platform didn’t come with one.
“Boringly accurate”. That’s a great way to put that. Always appreciate a bit of a challenge.
It uses a Rise Armament single stage trigger.
Yes indeed it does
This is the future of the AR platform
That’s what I want, already have an AK with folding stock.
Only in 308
They copied the PSA Jakl 💯
This isn't the future. It's just an AR18 clone which has been out since the early 1960s
It's not an AR-18 clone, lol. Have you even seen one field stripped yet? Doesn't sound like you have.@@notme3184
Looking jacked and tan. Keep getting after it brother.
Looks just like the PSA Jakl 💯
Bro you just motivated me to hit the gym 🙏🏾
Is the barrel mounted with a AR barrel nut?
I will say this to hopefully draw more attention to this fact. You have an AR-15 pattern rifle with a bolt release on it. If you took an m70 ak magazine with a high follower on the magazine then why can't someone modify the receiver on one of these hybrid rifle lowers so that bolt release interfaces with the magazine and then you could drop the bolt on last round. The rifle could still use regular akm magazines in addition to m70 magazine or even a proprietary magazine that allows for a higher magazine tab to interface with the bolt stop or whatever technical term locks the bolt to the rear on interfacing with the magazine. It is my dream to be a unicorn operator on the range and put 200 rounds through a rock and lock with a last round bolt hold open (Yes I know it exists on the FAL, but FALs use bullets that are double the cost) and then get bored and go home after getting a decent enough group at 20 yards
I'd like to see a torture test remake on this rifle. Great review as always brother.
you’re getting strong ole son!
Please make a vid demonstration of how ak bolt hold open mags work with these new dissent models
Meltdown video on this gun next please
Damn, Eric looking juiced to the gills.
Damn, Eric is looking jacked.
I like CMMG but after seeing Tactical Considerations review, I’m very leery about purchasing this rifle.
Aparently it was a soft retention bolt... the company switched them out almost immidiatly but a few were already sent out.
The price of new rifles is getting out of hand.
Inflation is real.
Damn! Has Eric been working out?!
Dude!! You look great. 💪
Dude your looking ripped!
I love seeing good people go from fat to ripped... i wish more people would take the initiative in life to do so, it just makes everything in life easier.
Can you review the 6mm Arc dissent? Though you would have to probably hand load the ammo.
Wonder how it handles corrosive ammo. Ik ik you should avoid it but im still curious.
Damn good lookin' gun.
It’s cool to you buff now after all those years 😂
Damn daddy you’re looking ripped.
God damn you are a unit, looking good. What the hell.
That stock looks nice
Bro this dude is looking ripped af
looks like a sweet rifle. and looks like Eric has been eating his wheaties...lol
Got mine in 3 days ago.went out today and gave up after 150 rnds. Failure to feed every 3 to 5 rounds. I used 5 different magazines 6 different ammo types and manufacturers. So disappointed. It was smooth and accurate just not reliable for anything. I’m gonna try again before it hits the sale block though.
Wow Eric, you have really lost some weight buddy. Great job sir! I wish I could motivate my ass to get back in the gym, but after working 12 hour days I'm just tapped at the end of the day.
A nice cup of coffee, like half a gallon.
You been working out bro? Looking jacked
This content, not all podcasts
Great video
Would love that side charger but not shelling out more money for it. My original gen 1 mk47 mutant still rocks
Lost some weight Erik, looking good brother!
Is this the dark bronze color?
Do you think the Dissent mk47 or dissent 9mm is worth the price increase over the standards ones? It's roughly a 400-600 dollar difference depending on which models. the side folding stock or brace option is awesome but realistically your gonna have them deployed when shooting. I wanna buy a cmmg 9 having hard time deciding weather I should build my own 9mm banshee with bolt & barrel kit or get the Dissent 9mkg? Any suggestions? I built my own cmmg banshee dedicated 22lr pistol & it saved me a lot of coin! Is the Dissent with the cost!??!
No
What's that clicking it's doing right before the round goes off I can hear this loud
Trigger Reset
Cool looking rifle. By chance, are you storing Skittles in your ear muffs?
After seeing One Come apart at about 350 rounds comma sent the part at about same round Count the Handguard was Moving Forward with a Gap That is an issue , i would like to see someone else Put a lot of Rounds through it, and see If it was just one , But having the same Problem around 350 rounds ,I will have to see that problem Permanently Fixed ?
Dude you’re looking swol!
It looks like you can not sling this rifle ( no attachment point on the rear). Another YouTub reviewer had the hand guard retaing lug shear off and the hand guard slide forward when firing. Lets talk about AR compatibility of parts?
Can you make this rifle in 6,5 gredal with 18" barrel..
It is what you say "not a lot of money" @11:25
Will the og full auto come back???
You lookin shredded like a Julianne salad man 😎🇺🇸
When did Eric get this fine? 👀 Nice guns and the MK47 too.
How is this weapon compared to the SIG MCX Spear LT?
I thought I just commented that you look great buddy looking good❤
4:30 maybe you meant ar18 and ar15?
I still love my ARAK
I do believe that's a Rise Armament trigger in there.
Meltdown the mk47 dissent day 1
Yes, more range time, less podcasts.
Whos the gym bro???
Great r3view
Rise armament makes the trigger
That is a very nice rifle
Now with a side-folding stock and a self-ejecting handguard.
He’s wrong: only the 300 blackout Dissent has an adjustable gas system.
Your handguard gonna come off while shooting
How does CMMG address the notorious extractor issue on 7.62x39 that uses a 5.56 bolt?
Bolt is a complete redesign from Gen 1 comparison vids I've seen, I think the new extractor is larger, the bolt face is crazy robust on these.
This rifle, like the original MK-47 (aka the Mutant) uses an AR-10 sized bolt in a modified carrier. It has never had the problems that some hogged out 5.56 bolts had.
A gunsmith told me buffers are not ATF acceptable as 16". Any easily removed length accessories are nfg.
What are you talking about? Please elaborate.
The A.. T... who?
I think you mean muzzle break, not buffer. The MB/flash hider needs to be permanently (welded or pinned) to count as part of the barrel length.
Maybe clean your ears.
@@inigomontoya6075 yes
Could you do a scope video, i wanted to get a vortex scope but idk. And I'd want a simplified scope
I can say the Vortex Strike Eagle is a great scope. I have a 1x6 on a Henry X Model. Maybe I'm easy but it does everything I want.
@@greenbean7853 I kinda want a scope on my marlin 30-30 but it's a great gun and has a waffle top and is nice to look at without a scope on it. I think I'll get a vortex for my 30-06 instead. I've been wanting to get more into western revolvers. Have a great day man! Thanks
4:33 No you're the one that's looking big and beefy bro
How does this guy have 2.7 m subs and only 21k views in 8 days. UA-cam is shadowbamming Eric
Exactly what I was thinking bro
It would be alot cooler with the charging handle on the receiver and a 8" barrel ...
Гарна гвинтівка 🎉🎉🎉👍🇺🇸🇺🇸🇺🇸🇺🇦🇺🇦🇺🇦🗽🗽🗽⚔️⚔️⚔️💪👌👍✌️😎
Interesting
I can say that this gun is great, but I drive a Toyota Corolla and have a new baby. Eric… does that company make a Corolla model gun?
Most of the guys our age that get buff do so after a divorce. Hope you’re doing ok dude.
Dude has been in the gym for a long time now. Gains don't show up just like that.
I think Eric is doing better than ever. Both mentally and physically.
Eric got a divorce?!? No more Brandi?????
I like Eric 💪.he a nice guy he is always trying to be a useful person .and help his fellow man .keep going iraq veteran 8888
I am married and just 90lbs now with lean muscle. I did it for myself and my wife gets to benefit. I suggest all men to do the same.
WTF 😮What s Your Anabolic Stack 🤣
Who's selling tickets to this gun show? Dang.
Compare this to the 21st-Tec!!!!
wtf is that ERIC? he on the TRT?
Why are so many manufacturers pin and welding these barrels? It’s a turn off in my opinion for suppressor owners with cans that don’t work with their muzzle device of choice.
Capture more market. Most populated states tend to have stricter gun laws but people still purchase firearms regardless of more restrictions.
Buffers and or tubes are becoming a thing of the past.
Same price as Robinson Arms XCR.
Was super excited to see these come out! These are the perfect adaptation for people who invested in AK mags and 7.62x39…don’t feel bad, I’m talking about me as well lol
Bob here
Hi bob
@@ThomasHendrickson hello
Boberrrrrt
BOBBEHHH
Hello Bobithy.
Have you been hitting the gym? You look good man, not as good as that rifle though
💪
I always liked this gun on PUBG. One thing on my list though is a single shot shotgun. My budd let me shoot his dove hunting.
Eric is all roided up now wtf 😂😂