NEJE PLUS 2S N40630 Laser Engraver - Unboxing and review
Вставка
- Опубліковано 22 гру 2021
- NEJE official page: neje.shop/
LASER ENGRAVER: bit.ly/3J3Smzn
NEJE PLUS 2S N40630 Laser Engraver is a good laser engraver. It's compact and affordable. You can also cut with it and use your phone to operate it. Good to buy for your first laser engraver. Easy to assemble and easy to use.
✎MUSIC:
Music from #InAudio: inaudio.org/
Infraction - Dancing Time
Infraction - Fly Away
Infraction - Nostalgia
*Upbeat Fashion Funk by Infraction [No Copyright Music] / Dancing Time
• Upbeat Fashion Funk by...
*Sport Trap Rock by Infraction [No Copyright Music] / Fly Away
• Sport Trap Rock by Inf...
*Chill Groovy Hip-Hop Relax by Infraction [No Copyright Music] / Nostalgia
• Chill Groovy Hip-Hop R...
✎FACEBOOK: / 3d-printsbuilds-101348...
✎INSTAGRAM: @3dprintsbuilds
✎TikTok: @3dprintsbuilds
✎Cults3d: cults3d.com/en/users/3DPrints...
✎THINGIVERSE: www.thingiverse.com/3dprintsb...
#3dPrinting #Timelapse #LaserEngraver - Розваги
Thank u for the video I'm definitely buying 1 tomorrow I'm happy about the app. thank u again
Awesome ❤️
Is it possible to change the setup up of this laser by placing the control board to the front and the X rail staying on the as it is. Meaning it would home to what would be front left?
The alternative is simply turn the laser 180 degrees to get the board at the “front” and X rail pointing to the left!!
Haven't done it myself, but it may work.
Why do you need to change the setup?
How do you adjust your focal length to be suited for cutting? I have the same module focused with the tiniest possible dot on the beam and i struggle to cut 3mm plywood or mdf even with air assist
I use wooden block(came with laser) to adjust the height and then I focused the laser beam to smallest as possible.
@@3DPrintsBuilds thank you!
Прикольная штука
Peut-il couper du plastique transparent ??
It can't cut transparent plastic
what would make this a 30W Laser Module (with a 36W Power Supply) ?
Module input 30w and optical power is 5.5w
@@3DPrintsBuilds this thing never uses 30W for the Laser! And its simply not a 30W Laser
@@JoergGebhard That's the info from NEJE. I think 30w is the machine power and the laser module power is 5.5w.
@@3DPrintsBuilds they said 5.5w , its the output power ,different with the 30W . Many brands have an output of 5.5W and say 30W or 50W or 80W of power. This is the way the seller sells
@@Kun373 You are right! Laser module output power is 5.5w and the 30w is machine power.
Pouvez-vous couper du bois de 5 mm d'épaisseur?
you can cut 5mm plywood.
@@3DPrintsBuilds Peut-il couper du plastique transparent ??
Как на anycubik