Looking at the board you can easily add the starting caps and fan connections to run the extra fans needed for another chassis as well as what looks like extra power connectors for the main control board. I will take a closer look at the control board and see if I can identify what some of the other components are used for
Clean up the pads first with copper braid, then your capacitor will be easier to place. It's best if you have 2 soldering irons at hand. Great video thanks for the information.
And where is the advantage? Why not mine in parallel with two unmodified? Or if you want it to be more quiet, why not slow it down from 13.5TH/s to 10TH/s? From the calculations, with an original one you get $ 90.72 today, and with a modified one you get $ 133.97, excluding electricity. Why would I care about life time? These ASICs are obsolete anyway. Can I use the 6 boards version at maximum power 27TH/s, with additional cooling and double power supply? Does anyone know in this case what would be the consumption at the outlet? Thank you!
the z9 mini uses the v9 controll board -> 3 of 4 slots are used.. is it possible to activate the 4th slot by switching the jumpers right next to it? Great work please give us some more details
thank you for your information, but what about fan connectors? which one can use for fan? and the fan connectors needs extra resistor and capacitor for complete this action.
hello friend have you already done maintenance on asic dragonmint T1 I have one that it connects the three hashboard but when it starts working it just restarts with a hashboard working normally the other two are as if it was not connected to the machine. but let her turn on the lights but not start working.
@@Alexander1560 So even with another source this only happens when the board turns on but when it turns off and on like lights again there is only one light as the other two don't say already tried with two boards the same thing happens.
Hey awesome video,I tried to use the link to get to your website to order the parts but the website seems to net be working,what type of resistor are they?
Hi Alex Thanks for Teaching and share your knowledge for upgrade controller card of Bitmain Antminer S9i. I have some Questions about this hardware upgrade. 1- I have S9i, can I upgrade this controller with that method? 2- In my controller has 9 points for socket, company use 3 sockets, 6 sockets are free. possible upgrade controller to 9 Hash cards? 3- At the beginning of the video, you have Welded a series of small pieces (under the microscope ) that I think should be a transistor, where can I find the type and technical details of these components, to buy it from the electronic market? 4- What is the benefit of this, apart from removing an extra ping network and saving the price of a controller? 5- Does this integration affect hash speed rates and hash rates? 6- I'm sorry if my sentences are difficult in grammar, my mother tongue isn't English. Thanks for answer me
1. Yes, you can do the same on the s9i board 2. In my tests the other 3 ports were not working, feel free to test and let me know the results. Other users said the same, that the other 3 ports are not usable 3. The components you need are resistors, and you can measure the ones on the other connectors. I also sell them on my website : mining-upgrade.com/product-category/electronics/ . I do free tutorials but I cannot give all the info, must find a way to get some cash as well. 4. This setup is very convenient for modded miners, you have 1 controller to ping for miner stats, update firmware, temp check etc. I would not do this on stock miners if no other modification for cooling or other will be done 5. From my tests no 6. No worries! Good luck!
@@lepadatupetrica8487 Cred ca am una din ce-mi amintesc. Vad ca se dau cu 70 USD pe ebay modificate. O las la 250 Ron. Consumul ajungea la 2500 W. Singura diferenta intre 1 sau 2 placi de control e ca ai hashrate-ul pe un singur miner si porturi doar pentru 2 ventilatoare. Eu dadusem disable la fan check ca le raceam cu apa.
amigo que puedo hacer si el minero me muestra una temperatura que es totalmente falsa, es decir tengo dos s9 y mientras uno esta en 75 c el otro esta en 86 c. pero en una sola placa. aconséjame
Hi Alex, ur link of parts isn't available. Please update the link. Dose this mod need any firmware tweaking apart from the hardware mod? I am willing to do this and need ur help. thanks.
Hi Alex, great work this is just exactly what I'm trying to do at the moment. I liked your work on the bmminer fixed Freq mod for the S9 too by the way. I just have one urgent question I wanted to ask you about this. Will it work with just one extra hash board port instead of the 3 you've added in your vid? I know you'd have to still skip a port cause like you said the middle port & outside 2 don't work but would it still work? Thanks Alex. Keep up the great work & have a great day. 😁
Hello Alex, would you consider doing this for me if I were to pay you for the work, parts, time & postage? As I have found the resistors are too small for me too solder. With my smallest soldering iron & using flux like you said I still can't do it & have damaged 2 or three boards trying. I am only trying to add one extra port like mentioned in my last comment. Please help me out if it is possible please & if you are willing to give it a go? Thank you for your time.
Hi, it will be expensive to do it with me, I recommend going to a phone or laptop repair shop. It will be a breeze for them to do the task. Show them what they need to do and you're all set.
Dear Alex, nice job! Based on your video I did the same process and it is works, Thank you! But I went further and attached all the 9 connectors what I need for my project. Of course (as you said) 3 of them are dead normaly. I would like to ask you please help me (give advice) how to turn them to active status.
@@custodialcustodian5996 extra capacitors and resistors are implemented already. But these 3 ports are not working. What do you mean on that add extra power supply?
Looking at the board you can easily add the starting caps and fan connections to run the extra fans needed for another chassis as well as what looks like extra power connectors for the main control board. I will take a closer look at the control board and see if I can identify what some of the other components are used for
think you can run 9 hashboards on one control board?
I am currently in the process of modifying the control board I will post a video of what I did if it works.
I wont be bothering, they're fan setup seem to suck an awefull lot of power for 2 12 volts fabs sucking only 1/2 an amp
Clean up the pads first with copper braid, then your capacitor will be easier to place. It's best if you have 2 soldering irons at hand. Great video thanks for the information.
And where is the advantage? Why not mine in parallel with two unmodified? Or if you want it to be more quiet, why not slow it down from 13.5TH/s to 10TH/s? From the calculations, with an original one you get $ 90.72 today, and with a modified one you get $ 133.97, excluding electricity. Why would I care about life time? These ASICs are obsolete anyway.
Can I use the 6 boards version at maximum power 27TH/s, with additional cooling and double power supply? Does anyone know in this case what would be the consumption at the outlet?
Thank you!
Nice. Would you please give a link for the resistor? Or maybe details about it?
Will like a like for the resistor
the z9 mini uses the v9 controll board -> 3 of 4 slots are used.. is it possible to activate the 4th slot by switching the jumpers right next to it? Great work please give us some more details
If you have a mini with the right firmware the 4th board will work out of the box
@@awidesigns Can you tell me what firmware I need for this?
thank you for your information, but what about fan connectors? which one can use for fan? and the fan connectors needs extra resistor and capacitor for complete this action.
hello friend have you already done maintenance on asic dragonmint T1 I have one that it connects the three hashboard but when it starts working it just restarts with a hashboard working normally the other two are as if it was not connected to the machine. but let her turn on the lights but not start working.
Try with another PSU. It sounds like a psu issue if each board works when is alone
@@Alexander1560 So even with another source this only happens when the board turns on but when it turns off and on like lights again there is only one light as the other two don't say already tried with two boards the same thing happens.
@@jardellemedeiros6988 No idea, I never worked with that kind of machine
@@Alexander1560 thank you very much for your attention.
Hey awesome video,I tried to use the link to get to your website to order the parts but the website seems to net be working,what type of resistor are they?
Can you do this with 2 T9+ I do know there is 6 connectors on the T9+
hello, can you tell me where you usually need repair on the control board and the hash board antminer z9 mini..!!
No idea.
hi what is the value of these resistors?
4.7k
Hi. Your website is down?
Hey brother have you tried to run 9 boards? With filling in more of the component slots?
Hi. Tried, it doesn't work. Software or hw limit
I had the same question. It looks like the chip is set up for 3 sets
Did you add extra power connectors and caps for everything?
so theres 3 more ports, could we not add 9 total?
Hi Alex
Thanks for Teaching and share your knowledge for upgrade controller card of Bitmain Antminer S9i.
I have some Questions about this hardware upgrade.
1- I have S9i, can I upgrade this controller with that method?
2- In my controller has 9 points for socket, company use 3 sockets, 6 sockets are free. possible upgrade controller to 9 Hash cards?
3- At the beginning of the video, you have Welded a series of small pieces (under the microscope ) that I think should be a transistor, where can I find the type and technical details of these components, to buy it from the electronic market?
4- What is the benefit of this, apart from removing an extra ping network and saving the price of a controller?
5- Does this integration affect hash speed rates and hash rates?
6- I'm sorry if my sentences are difficult in grammar, my mother tongue isn't English.
Thanks for answer me
1. Yes, you can do the same on the s9i board
2. In my tests the other 3 ports were not working, feel free to test and let me know the results. Other users said the same, that the other 3 ports are not usable
3. The components you need are resistors, and you can measure the ones on the other connectors. I also sell them on my website : mining-upgrade.com/product-category/electronics/ . I do free tutorials but I cannot give all the info, must find a way to get some cash as well.
4. This setup is very convenient for modded miners, you have 1 controller to ping for miner stats, update firmware, temp check etc. I would not do this on stock miners if no other modification for cooling or other will be done
5. From my tests no
6. No worries!
Good luck!
Salut .
Mai trebuie softata placa dupa ce lipesti tot?
Sau recunoașterea se face automat.
Mulțumesc
Salut, recunoaste automat
@@Alexander1560 ms frumos .
Ai una de vanzare gata facuta?
Ce consum ai avut cu toste 6 placi
Mulțumesc
@@lepadatupetrica8487 Cred ca am una din ce-mi amintesc. Vad ca se dau cu 70 USD pe ebay modificate. O las la 250 Ron.
Consumul ajungea la 2500 W. Singura diferenta intre 1 sau 2 placi de control e ca ai hashrate-ul pe un singur miner si porturi doar pentru 2 ventilatoare.
Eu dadusem disable la fan check ca le raceam cu apa.
@@Alexander1560 poti sa o adaugi pe olx sau sa imi dai un id de facebook
Mulțumesc
@@lepadatupetrica8487 gasesti nr de telefon la contact us pe www.deepcyclepower.com/ poti sa-mi scrii pe whatsapp
amigo que puedo hacer si el minero me muestra una temperatura que es totalmente falsa, es decir tengo dos s9 y mientras uno esta en 75 c el otro esta en 86 c. pero en una sola placa. aconséjame
Hi Alex, ur link of parts isn't available. Please update the link. Dose this mod need any firmware tweaking apart from the hardware mod? I am willing to do this and need ur help. thanks.
Hello i have a question sense you added three more ports for three more boards what soze power supply is needed for all 6 boards?
psu 2800 w or two 1600 w
Hi i tried to go to your website - its no longer active, Do you have any of these boards for sale? id like to buy 10x minimum
Hi, you can get in touch on discord if you want to talk: discord.gg/JKFzRbE
Hi Alex, great work this is just exactly what I'm trying to do at the moment. I liked your work on the bmminer fixed Freq mod for the S9 too by the way. I just have one urgent question I wanted to ask you about this. Will it work with just one extra hash board port instead of the 3 you've added in your vid? I know you'd have to still skip a port cause like you said the middle port & outside 2 don't work but would it still work? Thanks Alex. Keep up the great work & have a great day. 😁
Hi, yes, as long as the extra port is one of the threes I added
can i but 9 boards in one control antminer s9 plz rep
Hi, you can't
@@Alexander1560 thanks bro
Hello Alex,
would you consider doing this for me if I were to pay you for the work, parts, time & postage? As I have found the resistors are too small for me too solder. With my smallest soldering iron & using flux like you said I still can't do it & have damaged 2 or three boards trying. I am only trying to add one extra port like mentioned in my last comment. Please help me out if it is possible please & if you are willing to give it a go? Thank you for your time.
Hi, it will be expensive to do it with me, I recommend going to a phone or laptop repair shop. It will be a breeze for them to do the task. Show them what they need to do and you're all set.
Okay cool. Thank you heaps Alex. I think you've saved me a world of hurt & much more expenses. Thanks again man. Have a great day & all the best!
What reason to do it?
Easier management for custom equipment, less cables for immersion cooling where space is scarce.
halving electricity costs ? ^^
Dear Alex, nice job! Based on your video I did the same process and it is works, Thank you! But I went further and attached all the 9 connectors what I need for my project. Of course (as you said) 3 of them are dead normaly. I would like to ask you please help me (give advice) how to turn them to active status.
any luck?
you most likely need the capacitors and resistors, as well as the extra power supplies. I would guess.
@@custodialcustodian5996 extra capacitors and resistors are implemented already. But these 3 ports are not working. What do you mean on that add extra power supply?
Any way you can solder my board for a fee? Or sell me a board? I really want to do a 6 board setup
Saw some on ebay. Get it to an electronics shop, they can help you.
человек который паял первый раз в жизни браво
firmware is no problem?
Ya. Firmware works as default
@@Alexander1560 you mean no need any modification right? like VI editor
@@batbatchaa7135 no mod
Hi Alex Gradea can you make me a firmware that S9 Dual board go maximum th please i willing to pay or devfee ..
update a braiinOS+
HI dude, is it also possible with 2 antminer S9 SE 17th ?
Not sure. I think they don't have extra connectors anymore
@@Alexander1560 Hi Mate, thank you for your fast respond, I´ve looked the board it are stille the same board or i am wrong ? it´s similar the s9 board
yes they must be the same board´s, i´m interesting how much i cold take out maybe 30th/s ? that will be awsome
обязательно надо было так много флюса не?
Site is dead =\
nasty solder job dude, try flux then apply a dot solder.... you know, so it has something to stick to lol
Salut! Da-mi numarul tau sau fb. Multumesc!
Salut, intra pe discord daca vrei sa luam leg. discord.gg/5Eq5hUB
asicfw.io special custom firmware for 6 hashboard - 1550W/20.5T 1 PSU APW3+ 1720w/22.4T APW7+ 1800w PSU with chip tuning www.dropbox.com/s/ev69l4ejrz5319j/Antminer-S9%28i%2Cj%29_Pro_v5.0_%286%20boards%29_rc1.tar.gz?dl=0
dev fee 1%, antivirus inside, fixing more antminer bug