How to 1-step polish with a rotary!
Вставка
- Опубліковано 23 кві 2024
- At DIY Detail, we often teach the process of FINISH polishing with a rotary polisher and our rotary jeweling pad. But what about a 1-step polish and seal? That's what this video is all about -- bringing shine, and gloss, to dull paint. With just one pad, one machine, and one polish!
GOLD STANDARD POLISH: bit.ly/GoldStandardPolish
MAX GLOSS ROTARY POLISHER: bit.ly/DIYMaxGlossRotary
ROTARY JEWELING PAD: bit.ly/RotaryJewelingPad
PEARL WEAVE TOWEL (POLISH WIPE OFF): bit.ly/PearlTowelGrey
CERAMIC GLOSS: bit.ly/CeramicGloss
PLUSH BUFFING TOWEL: bit.ly/PlushBuffingTowel
With that said, a good portion of this video focuses on the prep process. Proper preparation of the paint (wash, decontamination, even Water Spot Remover) is essential for best polishing results.
We used...
RINSELESS WASH: bit.ly/RinselessWash
LEGACY SPONGE: bit.ly/LegacySponge
IRON REMOVER: bit.ly/3GfY4iM
DECON TOWEL: bit.ly/FineGradeClayTowel
WATER SPOT REMOVER: bit.ly/WaterSpotRemoverDIY
Oh, and if you can't afford a pad washer? Here's a great DIY method for washing your pads: • Detailing 101: cleanin...
Website: diydetail.com/
Podcast:bit.ly/DIYDetailPodcast
Join the DIY Detail Facebook Group!: bit.ly/DIYDetailFacebookGroup
#autodetailing #diydetail #yvanlacroix #carwash #claytowel #detailing #detalingtip #howtodetailacar #detailing101 #machinepolishing #rotarypolishing - Авто та транспорт
This company is blowing up the detailing market and it’s well deserved. Pure legit products.
Thank you.
Ivan, Nick - what's up? I have been a weekend warrior since I was 16 (almost 58 now) and now I have some pretty severe detailing OCD 😂 I am more than competent with a DA, and I did buy a cheap (Chicago Electric) rotary from Harbor Freight many moons ago, but I've only used it a few times, as I was basically afraid of it and the high speeds.
I've started watching your channel and saw this video. I figured. "Why Not?" and picked up a few waffle pads. I just got in from the garage, after polishing the top surfaces of my car. You are right on the money. Speed "1" and light movements are awesome. Even with only a medium polish, all but the absolute deepest scratches are gone (I'm not entirely sure they can be removed anyway).
The waffle pad IS better than the flat pad, there is a noticeable difference in the pad/machine "thinking for itself" and wanting to walk. I do have one issue, my polisher is VERY heavy. So I actually have to LIFT some of the machine's weight off the pad, or it gets twitchy.
AWESOME technique and process though, works GREAT!!
Wow, thanks for taking the time to comment
The Audi looked so much better after the gloss enhancement and ceramic gloss. Fun to see Nick loving the rotary as he was not a fan a year and a half ago. Thank you guys for another fun video!
Glad you enjoyed it!
Ceramic Gloss is honestly one of the best detsiling products out right now! I love using it and I absolutely love the results a day later. Still need to try Gold Standard and the pads!
Thanks for sharing!!
Really waiting on the gallon size water spot remover lol 😂 I keep buying bottles
It’s coming soon
Thank you for the video and the real time polishing section!
You are welcome!
Hi guys - just catching up on the last three videos. I was on a University Research project.
Great vid as always.
Hopefully it went well
Great video! my detailers love all your products and methods at my shop.
Great to hear!
Looking forward to getting the jeweling pad and polish! Love the rinseless and apc
Thank you.
Great video always like seeing the new polisher doing different work 💪🏼💪🏼👍🏼👍🏼
Thanks 👍
Nick I'm glad you mentioned the weather,because I been meaning to ask your and Yvan's philosophy on washing a car after a week or so,knowing it's gonna rain either soon or immediately after it was washed. 🤔
Thank you. Washing is better than letting dirt sit on the surface.
This will be helpful. Can't wait.
Thank you.
this is going to be a good one!
Thank you.
I’ve been waiting for this video lol. My old rotary is about done for. Gonna pick up the DIY rotary when I can.
Thank you.
Thank you.
Great video fella's
Glad you enjoyed it
When it comes to spraying, i've been really liking my DIY detail keg for blasting rinseless as of recent. I also have the IK foamer 12 that's going to be designated for foaming shampoos. I've hung up my foam cannon for right now lol.
Great
Awesome’ess guys …, the audi paint work looks great to start with 👍🏼
Thanks 👍
I’ve only ever used a DA and just bought my first rotary(spta) last week and your red jeweling pad, hopefully it won’t take too long for me to get the hang of it….also been using your rinseless wash so much lately I love it esp with your sponge, def gotta try your iron remover when it’s back in stock
Thank you, let us know how it goes in our facebook group
bit.ly/DIYDetailFacebookGroup
A perfect video for the spring. A skin rejuvenation! DIY...your car spa! If I use a random orbital polisher, similar to that one you used before on demonstrations, Should I have to be worried with the speed as it has one fast speed? Thank you Yvan and Nick! and keep it up.
Thank you.
Any update on when the diy wax will be released, thanks for another top video
We are hoping in May
@@diydetailofficial thanks
Great video guys! Keep up the good work!
If i may ask you a question, i have a Mercedes W124 and the clear coat looks like its cracking on the hood and also has some dark spots. Can you give me some guidance why is that happening and can i do paint correction on that car? I would really love to bring back to life that car
TIA
Unfortunately cracking indicates that it’s time to repaint. Lack of protection over the years is the most common cause.
Love the videos . When will iron remover, all clean , water spot remover be back in stock . We have been told next week for more than 1 month now! Real ETA ?
They came and went, they are back Friday or Monday
Okay, I love the rustic look of your garage. The product I've bought I have LOVED and have been incredibly impressed. And the keg for a sprayer? Thank you for that amazing idea! My dad who recently passed was a king and making his own beer and it was the best I've ever had with an average of 8 or 9 different kegs on tap. Now I know exactly what I'm going to do with a couple of his kegs and keep his joy of beer in my garage with my passion for car detailing. Thank you guys this actually got me pretty emotional, and thank you for the great product you continue to put out on the market.
Thanks for sharing!
The Marolex sprayers are top tier!
Thank you.
You guys are my favourite detailing channel! I'm a BMW mechanic from Québec but recently bought a whole bunch of DIY products as I'm learning better carwash techniques from you. For a one step, would the red or yellow pad be better? I assumed 1 step was the yellow, 2 step was the purple and then red. What do you guys suggest?
If you have a DA, use the yellow pad for a 1 step.
Good stuff
Glad you enjoyed
Im always waiting for a new video. How often do we have to apply polish on the pad? Because i see you polish a large section with nice results. And do we need prep before applying ceramic gloss?
Size of section is dependent on the paint and tool. Doing a test spot will provide an answer. No need for panel prep before DIY Detail Ceramic Gloss
@diydetailofficial thank you for fast reply
When will the decontamination bundles be available again??? Need all of it!!
Hopefully tomorrow
If you washed with Rinseless and used Ceramic Gloss as a drying aid over a bunch of water spots, will Water Spot Remover work? Or will it require polishing?
Yes it will be fine.
Hi there! A question if you will. I'm about to take on polishing my 2013 Jeep Wrangler that has pre existing swirl marks on the paint from car washes. Should I use just Gold Standard Polish during the polishing phase? Or in your opinions would it be wiser to compound first with something I have around the garage (I think Meguiars Ultimate Compound) first? I'm looking for the best result possible. Granted my Jeep looks pretty good already using your products with it.
Thank you. The JK is more fun to drive than detail.
Try DIY Detail Gold Standard Polish with the wool pad will do, if you don’t have that, experiment with what you have.
Could I use the red jewel pad with my basic palm sander as I'm a beginner detailer and thats what I have in my arsenal already? Or is a rotary really what's needed to take advantage of the red pad? Thanks for any help.
Yes, that’s fine.
You’ve talked me into a rotary. But should I. I have a Flex 3401. Would the rotary be that much of a difference. Odesa rotary need a different polishing compounds. Thanks. I truly respect you opinion
There’s no need, other than if you want too. The finish will be marginally better with the Rotary. Not necessarily do you need to change polish
how do you even do the decon method in direct sunlight? I did rinseless wash once and its awesome, any dried up stuff comes of with another pass of rinseless, but if Id like to add iron and clay towel decon how do I do it? Prerise with rinseless, spray off, at that point I cover car in rinseless again and start going pannel per pannel and drying right after, how to modify it to add iron and clay and do I do decon pannel per pannel as well and rinse it right after and dry???
Do the DIY Detail Iron Remover a panel or 2 at a time
Hi Guys,
Another great video, are your rotary polishers available in the UK ?
Not yet
fantastic 🥇👍🙋♂
Thank you! Cheers!
Question for you, if you're doing a 2 step using the yellow waffle followed up with the red jeweling pad do you wipe off the polish after you finish with the yellow first?
No
@@diydetailofficialthank you for always replying.
Are there any plans for Iron Remover in gallon form, not just 160z? Buying wholesale from Detailed Image i try and buy all major things in concetrate or at least gallon form. Especially something you spray a lot of when using it.
We have gallons available
Can i spray regular suds and rinse it off instead of using rinseless wash?
Yes
Nick, Yvan , forgot to add my question before..If I use a 3" random orbital polisher wth the jewel pad, similar to that one you used before on demonstrations, should I have to be worried with the speed as it has one speed at 12000 rpm? Thanks for your valuable advice!
That’s fine
@@diydetailofficial Thanks!
I am planning on using the 5/3 stack to coat my car. I am polishing with rotary and red jeweling pad. Is it ok to follow that with APP application using red pad and rotary palm sander before coating?
Yes
I've got a rotary at home so I tried your technique but not really getting the results I expected.
I'm from Australia so I can't purchase your exact products yet but I've got an orange waffle pad and am using Meguiar's UC.
No pressure low speed rotary slightly damp and covering an area about 10 times over gives me ~50% scratch removal. There are still a lot of visible swirls but looks glossier for sure.
Do I just need to keep going over? 20-30 times to get a good result?
You can get all our products in Australia, I’m doing trainings this week.
bit.ly/m/YvanVisitsAustralia
The pad is the most important part of the equation.
@@diydetailofficial thanks for the quick reply 👍🏻 are you selling your products at your training sessions/events or do we have to go to a retailer/online store?
Yall are some bad MF’s 😂 🔥 I’m a master detailer, I havnt detailed in a few years now I kind of lost the love for it unfortunately. But I see myself in yall ! The passion yall have for your craft is definitely there ! And yes the rotary is the best polishing machine if you really want that gloss to POP !! I always told my apprentices when I was teaching them how to paint correct , if you master how to polish a black painted vehicle you can polish any other color ! Anyways job well done 👍🏽 love it !
Thank you.
Hey! Can you share the link for the battery powered sprayer Nick used! Thanks!
Not available yet
Does Yvan not believe in using a different side of the decontamination towel when moving to different panels? Noticed multiple times simply adding iron remover to the same side and moving onto the next panel?
Yes, I flip it often, but if the contamination is light it might be every 2 panels
Need to move up to a wool pad on my black Volvo. Gold standard polish (My first time.) and then…
Question: Wool pad for better cutting, but then finish with the waffle pad or Jeweling pad? ~ Thanks ~
Yes wool for the most cut. For the finishing, try the yellow waffle
wistch product you use on the pad washer for clean the pads .
DIY Detail Rinse Less Wash
what is the RPM of the lowest speed setting on your brand rotary polisher? I use the Milwaukee and want to make sure I am using the right speed...
600
When will ceramic applicator be back in stock in the UK
It’s on the ocean
Could DIY do a video on the difference between a one step and a paint enhancement?
That’s an easy one, the name.
There's hundreds of videos online about this already. A one step is using a compound that has a cutting and finishing abillity. An enhancement might remove 50+ percent of swirls whilst improving gloss. Which is basically what a one step also does.
Do you use Deionized water for the buckets?
No need
Favorite sprayer, $5 Harbor Freight half gal. hand pump sprayer
Nice
Go for the 1 gallon pump sprayer instead. It's the one designed to be bleach resistant. The long hose/handle is much easier to work with and the pressure is better. I always find the half gallon to hold barely enough rinseless solution.
If my polish is not sprayable can i dilute it with water to make it sprayable? And how can i do a 2 step with rotary?
Don’t dilute your polish, use as designed. Yes you can do a rotary 2 step
If the key to prevent streaking is to keep the rotary flat, how do I tackle areas where it would be impossible to keep it flat? I.e side skirts that are concaved and front bumpers that are angled in tight areas.
Keep as much of the pad in contact as possible
Just need to know when their products will restock...All Clean specifically..lol
End of this week
When will iron remover ., all clean, water spot remover be in stock ? We have been told next week for about 1 month now!BTW love the videos .,.
@@SARKISKEHEYANKeep checking! They restock and in an hour or two its all gone! 😂 I’m one of those culprits my self 😊
I’m assuming rinseless 256:1 in the pad washer?
Correct
where do you get your clear buckets? Thanks
Local restaurant supply
What towels does he use to wipe it off?
PEARL WEAVE TOWEL (POLISH WIPE OFF): bit.ly/PearlTowelGrey
Could this be done with a small orbital sander?
Yes
@@diydetailofficial will it be enough to remove scratches?
@@MarcYanOfficial Yes, because it has abrasives and rotation.
@@privacyrules I’m genuinely scared to even use a hand sander. Never done it before. But this has given me more confidence
Ready
Thank you.
What was the red towel
diydetail.com/products/korean-plush-buffing-towel
Krakow welcomes you 😃
Thank you.
no need to wipe the polish off with a rinseless dampened towel?
Only if it isn't coming off easily in it's own.
It’s best to use a rinse less dampened towel
What is the ratio of Rinseless in millilitres? 🤔
4ml to a L
What’s the point of spraying rinseless on the car to immediately rinse it off? I didn’t think the rinseless was strong enough to cause any sort of chemical breakdown. Seems like an unnecessary added step that would add time and waste product?
Spray and rinse is to take off any abrasive particles before doing a contact wash.
Ahh I guess I was putting too much faith in the rinseless pre-spray to provide enough lubrication for the contact wash.
I clicked on a buff video and it’s 15 mins of car wash 🙄🙄🙄🙄
Prep is as important as the polishing
NEVER NEVER USE A BUFFER ON A CAR..NEVER..
Why not?
@@diydetailofficialit might get too shiny
@@rooboy99😂
Wait. What 🤣🤣🤣🤣. You have no idea what you’re talking about.
What about a 1 step with a yellow pad and rotary?
Yes, but red is better
@@diydetailofficial why is that? More gloss? I can only use a rotary now (old bones and joints that hurt.. rotary is smooth) and I have your gold pad, red pad, and gs polish. What about a 2 step? Gold pad, followed by a red pad? More cut than just a red pad? No?
That’s the best if you’re up to doing 2 steps.
I'm new to polishing. I've heard you need 1 pad for everyv2 panels. Is this true if you're using a pad washer? Will 1 pad do the whole car?
Nope, you only need 1 pad with a pad washer