How to pull the rear hatch panel on a Toyota 4Runner?

Поділитися
Вставка
  • Опубліковано 20 лип 2024
  • Learn where the hidden screws and bolts are plus where to pull on this panel to remove it. This makes for an easier film installation by getting this door panel out of the way.
    If you're new to tinting and looking for more customers, click on the Become a Member link below and you'll be listed on Window Film Revolution's Nationwide Member Locator also listed below.
    Not sure what tint tools to get? Check out the WFR online store below. Don’t forget to join WFR’s private Facebook group with discussions daily about tinting tips and tricks from tinters worldwide.
    - Become a Member: windowfilmrevolution.com/Foru...
    - Member Locator: www.windowfilmrevolution.com/...
    - Find tint tools at: windowfilmrevolution.myshopif...
    - Join the largest Window Tinter Facebook group: / 1591848347716956
  • Авто та транспорт

КОМЕНТАРІ • 29

  • @ericcorvers1743
    @ericcorvers1743 Рік тому +9

    Amazing video!! Had a loose piece of metal clanging around every time I opened/closed the rear hatch. This video is perfect to follow! I also had to unscrew and pull down my speaker so I could shove my hand into the metal/body cavity… and wala !! A loose nut that turns out to be VERY important.. your 4Runner name plate (liftgate garnish) is secured by 4 bolts with nuts. My liftgate garnish was a little loose and it drove me nuts but I had no idea why. This loose nut was the culprit! I screwed it back on and now my liftgate garnish is super secure! Thanks so much for helping save my money and sanity!!

    • @seanpop2886
      @seanpop2886 Рік тому

      I am here for the very same reason. 2020 Off-Road

    • @michaelrobbins6669
      @michaelrobbins6669 11 місяців тому

      Same. 2017 TRD Pro

    • @pc1408
      @pc1408 7 місяців тому

      same!!!! haha.

    • @careymobley9475
      @careymobley9475 5 місяців тому

      Same 2016 SR5

    • @MarckySportsDenver
      @MarckySportsDenver 2 місяці тому

      This is why I’m currently watching this video. The screw is driving me crazy!

  • @junodawg8433
    @junodawg8433 7 днів тому

    This video was spot on!! Thank you!!

  • @nrg2178
    @nrg2178 2 місяці тому

    Much appreciated! Thanks to your video I was able to access and quickly fix a finicky reverse camera in my 4Runner -- a loose wire housing that was easy to fix but mystified my Toyota dealer -- and saved money too,

  • @joshbayers8008
    @joshbayers8008 2 місяці тому

    Thanks bro. Super easy to follow and quick to the point.

  • @Renato44Atx
    @Renato44Atx Рік тому +2

    Thanks man! Great video got to fix door wife is happy.

  • @DD556762X51
    @DD556762X51 2 роки тому +1

    Thanks , your vid saved me time to tighten some screws.

  • @westside_tints8197
    @westside_tints8197 Рік тому

    doing a 4 runner tomorrow thanks bro!

  • @leocadena6844
    @leocadena6844 2 роки тому

    Good info! thanks man!!

  • @seamosserchin9024
    @seamosserchin9024 Рік тому

    Thanks for sharing

  • @ricardocabralthetintguy6077
    @ricardocabralthetintguy6077 2 роки тому

    Thank you brother

  • @Joemama-jq8fm
    @Joemama-jq8fm 4 роки тому +7

    One 10mm at the grab handle. Thats it.. Have no idea what else you unscrewed. Also an indent to start the pry tool on passenger side

    • @JKFlaker
      @JKFlaker 2 роки тому

      Thanks! That helped

  • @ernestogonzalez1311
    @ernestogonzalez1311 4 місяці тому

    Real handy videos for a guy like me who started a job as a body worker thank you sir 🫡

  • @beeee777
    @beeee777 Рік тому

    Thanks dude

  • @ghahandi
    @ghahandi Рік тому

    Easy peasy- Thanx

  • @daytonaviolet6957
    @daytonaviolet6957 Рік тому +3

    Actually no need to remove the two 10mm by each of the lights. Those bolts hold the speakers to the door. Only need to remove the 10mm by the pull cord. The panel is held on my 12 push clips. so just pry them out.

    • @talsma
      @talsma Рік тому +1

      I came here to say the same thing. Just to be clear, you still need to remove the lights though.

    • @Pineoilheavan
      @Pineoilheavan 11 місяців тому +1

      Good call. I’m about to pop panel off. 2014 Runner lift gate is rusted out from the inside. All of this internal components have been compromised. So yesterday 7/29 I powered window down a bit to get some airflow and the glass went sideways & upon further inspection through rust holes in the garage I could see the tiny cable that secures glass has slipped off these round polyurethane guide tabs. Ahhhhh. Living in northern Wisconsin winters wreaks havoc on metal parts.

  • @jimmycoffey6708
    @jimmycoffey6708 2 роки тому

    I am having trouble getting license plate screws out on back of 2016 4Runner...would this allow me access to the back of the screws??? or would there be more to remove....was thinking vice grip from back?? the plate is on with rusted screws...not bolts...

  • @chrisb8573
    @chrisb8573 8 місяців тому

    Same 18 pro

  • @kellybray5753
    @kellybray5753 3 місяці тому

    What year?

  • @user-hf8ie8mf3n
    @user-hf8ie8mf3n Місяць тому

    Sweet. Easier than I expected. Cheers. 👍🤪🏳️‍🌈

  • @JBIRD575
    @JBIRD575 4 роки тому +1

    Torch it I see that tool.....

  • @marktwo3160
    @marktwo3160 8 місяців тому

    Hick