Rail Head Defects - Severe Engine Burn at the Derailment Site
Вставка
- Опубліковано 14 лип 2021
- In this video I'm going to show you a very severe rail head engine burn caused
by locomotive wheel slip. This happened as they were trying to re rail the loaded
cars that were off track. I will explain how Hulcher re railed the 2 cars and why
this engine burn occurred as they were re railing the last car.
Most engine burns that we have had are very small in comparison
to what you will see here. I will do a future video on some of the other burn fractures
we have had.
Hulcher did have to get their side booms up here to re rail the last truck set.
Sorry I was not here when that happened. Hope you enjoyed the show today
where we bring the railroadin to you!
There are more videos of the derailment here on the Cumberland Mine RR
located near Kirby Pa. Here's the link to see all the videos:
• Curve 18 Derailment
Something I learned the hard way, from many years in industry, is that when we ran equipment with known issues ( in your case the cut out traction motor) we would regret it, as ultimately we would create even bigger issues.
I couldn't agree with you more Stan, sadly not everything thinks
that way or possibly this might not have happened. Appreciate your
watching sir
This guy is true legit. I bet he makes a great mentor to anyone willing to learn this fine art form. What sucks is kids these days all expect 6-figures out of HS. So I bet it’s hard to find good help these days.
I'd love to get into this field and learn from him. Seems like the perfect mix of experience, common sense, and humor!
Always knew Engines (Units) slipped but you’re the 1st person to show us the damage it causes.👍
Glad you enjoyed the show today Ken, thanks for writing in and for
watching sir
I thot with all the automation and sensors on the new units (maybe that's not this one) sanding was automatic and slipping nearly impossible. Analogous to automatic/manual 12 speeds on a truck. Gear clutch grinding nearly impossible (l've only ever heard the slightest barely audible grinding only once in a very long while)
Here's a couple slip videos...
ua-cam.com/video/xmwX_cILJgM/v-deo.html&ab_channel=TrainMasters4848
ua-cam.com/video/07vc1q73i-c/v-deo.html&ab_channel=HotspotsSoutheast
ua-cam.com/video/dSmtV8hrlAY/v-deo.html&ab_channel=DelayInBlock%E2%84%A2Productions
ua-cam.com/video/t5r6LyC9Krg/v-deo.html&ab_channel=C%26ORailfan
@@kleetus92 thanks for sharing
Actually AvE showed us huge train burn outs a few years ago
I remember seeing these rail burns as a kid walking a track, but never understood what I was looking at. Great video and insight.
Well now you know. These are extreme, will have do a vid in
the future with some of the smaller ones, they are far less
intimidating to look at. Appreciate your watching sir
As a retired locomotive engineer, I can honestly look back and say I produced a few rail burns over the years I've worked in engine service. It's interesting to note that it always happened when I was running an EMD GP38-2 diesel locomotive. It seems these four axle engines were a bit "light footed" (not as much weight on the drive wheels). Once when shoving a heavy cut of cars in the yard, the wheels underneath the cab of a GP38-2 I was running at about 5 mph just "took off" and before I knew it there was an orange glow (it was dark out) coming from underneath my cab windows. I throttled down immediately, but the damage was done and there were four nasty, new rail burns on the tracks.
Thanks for sharing the cool story! Probably not a lot of engineers
who can say they never had some degree of engine burn, we got
burns all up and down our rails, most are insignificant, but still there.
Sure is a lot of heat created from wheel slip. You might enjoy
this video of steam locos slipping, and appreciate your viewing this
video
ua-cam.com/video/MQKbwiRZ7fY/v-deo.html
@@ccrx6700 Watched the video. OUCH!
We have GP38-2 that go through our town, they have a pretty unique sound to them.
I was always curious as to when the locomotive would spin its wheels how much damage it could do ! I found this interesting ! Thanks for the video !
Your welcome Victor, after I put this video out, several folks wrote
in with links to some vids and pics where the wheels had actually
burnt the rail almost in two, that was amazing to see. Do appreciate
your watching sir
Great videos! It’s very interesting to see everything that happened! I work with an engineer at NS. He is famous for spinning out. When you work nights with him, he will tie on to cut of cars and go straight to notch 8. Sparks flying and the GP38 with the slug starts jumping like crazy. He won’t let up until you start counting car lengths for the tail end. I see these marks every day. Anyway, great video! Thanks!
Your welcome Sam, glad you enjoyed watching, but from what you're
saying you could make a whole series on these...LOL Be careful working with that guy, as I'm sure you are
Really do enjoy you taking us through these inspections and going into detail explaining it.
Thank you Pierce, appreciate your writing in and for watching sir
When i first started on the CN as a Holland welder, it blew me away how much science,math and know how goes into just 2 pieces of steel. More than just two simple pieces of steel nailed down to lumber ( spiked to ties )
Hello from Nakina Ontario Canada
It never ceases to amaze me either 🌝
@@ccrx6700 hehe I bet. Hope all is well and best wishes from Nakina Ontario Canada bud
@@nakinajay thanks Jay, you also 😊
Wow I just seen the exact same thing last month. I along with my little buddy 11yr old grandson was walking westbound on the ole SSW COTTON BELT and found the same thing, I thought it looked like wheel slip wasn't sure. Thank You Mr. Dave for your railroad expertise.
Thank you Terry for taking the time to watch and write in
with the nice comment my friend. How cool you go rail fanning
with your grandson, that is so neat.
I loved trains all my life and appreciate your technical breakdowns of the operational, maintenance and emergency functions of the railroad.
Thank you for the nice comment kdaddy. Glad you could take the time to pay us a visit and check out the video. May you have a most blessed day my friend.
Always good to review Track Maintetance video - Great Work & Effort!
Thanks 😊
Very pleased to hear you enjoyed the video. We do
appreciate the nice comment and for watching sir.
Appreciate that you take the time to explain things like this to us.
Thank you Al, glad you enjoyed and thank you for the nice comment sir
Thank you for taking the time to show us another fantastic video, that is full of interesting issues. I would never have dreamed of all the things that are involved with the railroad. Take care and have a great week.
Thank you again Valerie, appreciate your very nice comments and
for watching my friend
Makes me feel better knowing guys like you are on the job. Love your vids!
Thank you Tom for the nice comment and glad you are feeling better.... :-)
Thanks for sharing your knowledge with us train lovers. I sure hope there is someone coming along behind you to learn.
Your very welcome Lindsey, my pleasure. Nice to hear you enjoyed 😊
Always a pleasure to watch dave. Nice vantage point from in the truck keep them coming!
Thank you Jeff, appreciate the nice comment my friend
Just discovered you on this video, thoroughly enjoyed the specification side of things and your detailed explanations , trackwork usually takes a backseat in most forums but I've spent a long time on line shutdowns in Aus and really enjoy seeing how it's done elsewhere . Subscribed 👍
Welcome Tim, we're glad to have you with us and great to hear you
enjoyed the video, got a lot more on my channel page if you're interested sometime
I've learned more from you in an hour of watching your videos than I would have been able to any other way besides being in your shoes
Well golly Ray what a nice comment, really do appreciate your
saying that and we thank you so much for watching good sir
Thank you for sharing your knowledge and showing us exactly what happened 👍
Your welcome, very nice to hear you enjoyed the show, we do
appreciate your viewing
Always enjoy your videos and how you give us in depth information w issues that occur especially w the rails. Thanks for sharing this video and I'm viewing this from the 1st state of DELAWARE!
Thank you Richard, appreciate your watching in and for the nice comment sir
I like it every time that you come out with a new video you keep your videos interesting and informative
Well thank you Clark for the nice comment, really good to hear
that you are enjoying them, do appreciate your watching
I'm really glad I found your channel I enjoy railroad videos seeing the different engines but what you do makes sure the trains CAN keep going it helps give me a better understanding of the whole operation thank you so much 🙂
Awesome comment Larry! Thanks so much and we are really
glad to hear you are enjoying and for the great support of
the channel my good man.
Great explanation on the rail damage. Keep up the good work and thanks for sharing.
Thank you Brian, I do appreciate the nice comment and for
you watching my friend
Wow, I've walked many a mile of rail in my days. Only seen track that looked like that a few times, and had no idea it was from wheel slip. Thanks for educating me on this now I know, and thanks for the hi-rail ride, you should do a video just on that.
Glad you enjoyed, have you seen this video riding the hi rail?
ua-cam.com/video/Ti9o0e1qFzA/v-deo.html
Your videos are interesting and educational for people like me who don’t know much more than I like watching trains. Fascinating all the things that have to be maintained to keep the trains going. Thanks for making these.
Your welcome and thank you very much for the nice comment, really swell of you to write in and for watching
Thank you for bringing us this very interesting and informative video, it is much appreciated by the people.
Thank you John for the very nice comment and glad to hear you
enjoyed sir, appreciate your watching sir
Dave, your on my list for number one employee:
1. Conscientious, 2. Knowledgeable, 3. Gets the job done right
Thank you for the very nice comment Mack. We did get those rail
changed after that video was made. Very much appreciate your taking the time to write in and watch the rail defects video my friend.
You have a great gift for making education enjoyable (or entertainment educational) , Thanks and Be Safe!
Thank you Alan for the very nice comment, we do appreciate that
and for you watching sir
Fantastic channel, I've learned a lot from watching, I'll keep my eye out for these now, knowing what they are when fanning. Thank you
Your welcome, and we are really glad to learn you are enjoying
these videos my friend. Really appreciate the very nice comment.
Good detective work! So much to know----who knew tracks are so complicated?
Thanks for showing the burns. The ride in the truck was neat 👍
Your welcome, really glad you enjoyed, appreciate your watching
and for writing in
Awesome detective work Dave! You're like the 'Columbo' of railroading 😉
LOL I used to love to watch Columbo! and Charlie Chan! Appreciate
your watching my friend and thank you sir
No, he isn't. He doesn't keep saying "Oh, one more thing" all the time. :p
@@NiceMuslimLady 😄
Dave, once again, another fabulous, informative video! So many things I never knew. Plus I get to see some Greene County scenery! Thank you sir!
Thank you Pete, appreciate the nice comment and for your watching sir
@@ccrx6700 Thank YOU, Dave! It's like I'm standing there with you!
Yet again a very interesting video. Thank you sir !
Thank you, glad you liked watching, do appreciate that
Pretty interesting and knowledgeable video man. I had an uncle that retired from CSX, he was on the repair crew. He told me that they had a pull engine out of a bank that had derailed. It was in the bank around 6-7 feet.
Another time an engineer wore the rail down like this in your video, but he wore it down until the rail was about 3 inches tall. Pretty crazy
Thanks Christopher, glad you enjoyed. Here's an image another commenter sent in that is pretty much what you are talking about
imgur.com/RO4Fb1e
This is a type of friction welding , good luck replacing all that burned rail , very interesting thanks .
Your welcome Tony, glad you enjoyed and appreciate your watching sir
Conrails Dow line went past my
house growing up and the grade
started there and went halfway
to Alexandria Indiana and when
those SD's would dig into a coal
train they would slip a little.
We used to have Rail grinders
come thru every so often along
with those SPERRY detector cars
and check for cracks and wear.
Back in 77 Conrail replaced all
of the jointed rail with continuous
Rail and the cool thing was watching
track crews using thermite to weld
in sections that had to be replaced
for cracks and wear!!! Thanks Dave
for another great video for us train
freaks!!!!!!!!
Your welcome my friend, glad you enjoyed and appreciate
your writing in with the history lesson, I love to hear stuff
like that about Conrail. Got a video in future coming out watching
thermite welding, will be awhile for it comes out
Real fascinating Dave. Saw some railburn once in a yard some many years ago. Hard to imagine it.
Glad you enjoyed the show today Bill, appreciate your viewing
Thanks for the update and education, Dave 👍 I sure don't envy you or your crews. Wish I could ride along sometime 😉
Your welcome Joseph, thanks for the nice comment and for
watching today's show sir
Excellent job teaching "railroading. " 👏
Glad you enjoyed the show HugsBach. We do appreciate your
writing in and watching my friend.
Great in depth info as always.
Thank you for the nice comment and for watching, appreciate that
learn something new with every video, you're great explaining and the reasoning.
Thank you Edward for the nice comment and really glad you are enjoying these sir, it's great to hear that. Appreciate your watching sir
Thanks for the info my friend! Very interesting.
Your welcome Rick, glad you found it enjoyable sir
Thank you for making these videos, i've been wanting to see what happens to the rail when train wheels slip.
You are welcome Robert, glad you enjoyed. Thank you so much for watching and writing in with the nice comment. May you have a wonderful day my friend.
Another interesting video. I was watching someone else's video the other day and it was showing a CRX train full of hoppers going up a grade and it was barely moving. Every time the crew on the train throttled up it was a shower of sparks from both ends of the 2nd locomotive.
That's pretty cool if you got to see that. Wonder if the sanders
weren't doing their job? Was it wet rail? I've seen them stall on
horseshoe curve several times but have never seen the sparks,
they usually stall with only cars in front of the camera. Appreciate
your watching and writing in sir
Very interesting, thank you!
Thank you Derrick, glad you enjoyed the show today, appreciate
your viewing sir
Informative interesting and a great video. Thanks for posting it.
Thank you Clyde, really swell to hear you enjoyed sir and do thank
you so much for watching
Loram is not going to be able to grind those spots out! To continue safe rairoadin' those rails eventually need replaced. Thanks for the video Dave.
Yes sir, no hope for them now but replacement, you are right in
that. Do appreciate your comment and for watching my friend
hard to imagine someone choosing to build an isolated rail line like this nowadays, seems like similar projects all use long conveyors now because of all of the issues that you run in to when you can't interchange with other railroads
thanks for showing us all the work that goes into keeping the line running!
Guess that what US Steel back in the early 1970's decided to do,
but then again if it was all belts, there wouldn't be any RR videos
from me, so count your blessings there...LOL Thanks for watching
Hey Dave !!! Thanks for explanation !!! Saw this when they used the ""OL"" Steam Locos ,,but never thought much about ""DIESEL" Locos doing that !!! Have a good week & ""KEEP IT SAFE ""!!!
Thanks K B, you may enjoy this video, all about steam wheel slip
ua-cam.com/video/MQKbwiRZ7fY/v-deo.html
@@ccrx6700 Viewed the video !! Yepper !!! Lots of rail slippage there !!! Thanks
@@KB-gs8zi thought you might enjoy it
what a great video and sharing your knowledge ,
Thank you Gabby, glad you enjoyed the show today, appreciate
your viewing
Had no choice, I had to "Subscribe" to your channel as I've become addicted. As a newly minted "Railfan" after visiting the Horseshoe Curve last month I crave to learn & understand the exact things you cover in your videos...Many thanks for sharing your work experience & compassion for RR'ing with us. Can't wait to view all your past videos!!!
LOL, glad you are addicted to something good! Really appreciate
that and thank you. HSC a nice place to visit, hope you saw Railroaders Museum there too. Did you know Virtual Railfan has
a 24/7 railcam at HSC? I watch it sometimes
@@ccrx6700 Thanks for the reply. We traveled 4 hours to spent nearly 3 days (more time needed) in Altoona, HSC, Cresson, Gallitzin, Tunnel Hill etc. & the Museum too. Yes, I watch VRF@HSC Live almost daily. Planning another trip in October!
@@bobblenuts awesome 👍 you had a great trip there, saw the good places
Your vids are great. They can even help a non railroader be safer which helps us both. Thanks again, Dave. Peace
Thank you Randy for the very kind words. We really appreciate
your watching the shows my friend.
Thank you so much for your explanation. You are speaking my language. Appreciate it.
Glad you enjoyed and thanks for the nice comment. This is the most
extreme burn we have ever had, got lots smaller ones which you know
what they look like, will sometime do a future vid with a compilation of the various degrees of burns
Nice explanation of this subject, I have piloted Sperry and Herzog rail detector trucks over the territory almost every time that they came onto our territory throughout my RR career.
Glad you enjoyed Steve, ultrasonic testers were here bout 4 weeks
ago and didn't find any internal defects here, so that made me feel
better until we can get them replaced. Appreciate your watching
@@ccrx6700 You are welcome and every time they came onto our territory and tested we were asking each other what are they going to find today and how late are we going to be working.
@@StormySkyRailProductions i can understand that 😊
very interesting, thank you!
Thank you David, good to hear you enjoyed and appreciate
your watching my friend
Great video Mr. Dave. I've seen some burn but nothing compared to that, wow! Are you sure they didn't have the ice cleats on that engine? lol! Thanks again Dave and stay safe my friend.
Thank you Rick for the nice comment, do appreciate your writing in and for watching my friend
Great video. I've never seen the damage that causes. Excellent video
Thank you, glad to hear you enjoyed the show today and for the
nice comment, appreciate that sir
@@ccrx6700
Was talking to my friend who has been on the railroad for some 35 years. He said he has never done that, but once he saw the video, he said you are pretty much spot on with what ya said. He even said that it's crazy. He went back and watched the entire derailment series, he was as astounded as you was. Very impressive. Thanks for sharing.
@@vanlifeinthecity9798 thanks for sharing that with me 👍
I absolutely love your videos it opens up a lot and shows really what’s needed in good track work and not to mention any names but a tourist RR in New England I might say shouldn’t be operating with what they have it’s so scary I don’t even go near tracks when they run around the train. You would have a heart attack if you see what my eyes see!!!! Great cideos as always keep up good work bud.
Thank you Christopher for the nice comment and great to hear
you are enjoying these. Do appreciate your watching my friend
Good lesson today thank you!
Thank you, glad you enjoyed watching sir! Appreciate that
We call these Wheelburns in the UK. Often they appear on the approach to Signals or around Station areas; wherever the Trains might slow down or speed up for whatever reason. We tend to keep an eye out for these during leaf fall season as this reduces wheel-Rail traction, increasing likelihood of slipping.
This can be one of the reasons for flat spots (or ‘flat tyres’) on wheels too, because it’s not just the Rail that wears like that but the wheel will have matching damage. This can then turn the wheel into a hammer as it rolls on down the track. This will present yet more problems like surface damages and cracking which can lead to Rail breaks.
Great stuff!
Thank you for the excellent comment, always I love to learn how our overseas neighbors do things and the terminology used. 😊
I thought about the sand. Glad you covered it.
Your welcome Howard, thanks for watching sir
I enjoy your videos so Much Sir !! HooAH !!
That's really great to hear Tom. We very much appreciate
your taking the time to watch them and write in my friend.
Looks great!!
Thank you Shane, glad you enjoyed watching sir
Now that I've watched your videos, I can't look at a train track the same way!
LOL... glad to hear that you are enjoying the videos, there a lot
behind the scenes stuff goes on that most folks don't realize, just
glad I can be a small part of revealing it. Do so much appreciate
your watching today's show
Thanks for the explanation. I too am curious if the wheels on the trucks were affected as well. Hope that doesn't cause any more trouble before you get them replaced. Have a good weekend sir!
Your welcome John, yes the wheels on the loco were affected. The next operator noticed a really rough ride and actually stopped the
train and looked at the wheels. He did tell me that eventually
later that day the wheels smoothed out for him. Good question and
thanks for writing in and watching sir
Another fascinating video! Is there a cost-benefit tipping point where the value of recovering from the derailment faster and with less supplemental equipment, is worth the risk of the locomotive damaging the rail? Or, should a higher priority always be given to protecting the rail infrastructure?
Well, this was human error caused, the ground man from Hulcher
kept telling the loco operator to pull and he did up to a certain point,
should never have happened, but it did. Appreciate your watching and for writing in
Great Explanations
I'm new to your channel
Thank You/Take Care
Thank you Jeff and we appreciate your watching. Do welcome
you to the channel and hope you will continue to enjoy what
we're showing. We're glad to have you with us.
Thanks for the video. I use to see those marks on the tracks behind my house and could never figure out what caused them.
Your welcome and glad you enjoyed the show, appreciate your
writing in and for watching
@@heyyy4783 I have absolutely no idea what you are trying to say.
Howdy , i find this very interesting and i have seen this before on some rail Thanks
Your welcome Gary, good to hear you enjoyed the show today sir,
appreciate your viewing
@@ccrx6700 Thanks , i really enjoyed it How is it going Now
@@9005067 👍
Every time I've seen a video with sparks flying off the wheels I've wondered what it does to the rails! As always good content! Thanks. PS: it doesn't matter if your lawn is 100 acres
Are those rail grinding videos? Where the rail top/inside face is lightly touched to re-smooth the surfaces.
ua-cam.com/video/OWWR-NRKy4w/v-deo.html
@@thomasboese3793 I meant wheel slip videos, not the Loram
Yes Thomas that link is, they are amazing to watch, all the stones
on those grinders are computer operated
Thank you, great to hear you enjoyed and appreciate your watching and for writing in
@@Alcorob Well to me your "sparks flying off the wheels" sounded like rail grinding. I have never seen a loco slip, other than a steamer. (Living in a sort of a flat-ish sawtooth territory. Lots of short, light grades. Only one major place where helpers might be used now and then.)
My engineer sir.
Thankyou very much for this good video.
for the introducing of damages of rails by traction of train wheels . Lovely your friend Thomaskutty from India 🇮🇳
Locos can be hard on the rails specially when they spin
in one place for a short period. Unfortunately this could have
been avoided, grand man and loco operator got their
communications mixed up.
@@ccrx6700 Thankyou my engineer sir. ❤️❤️
A local siding has some engine burn on it from trains sitting and then leaving over the past few years.
Does happen when a train first starts to pull a heavy load specially
with wet rains, don't know if you like steam or not but here is a vid
you may enjoy all of wheel slip on steamers Eric
ua-cam.com/video/MQKbwiRZ7fY/v-deo.html
Good ol wheel burns got to love them. Last round we had there were 6 in a rail length.
Oh dear! We have many others but they are isolated, always
puzzles me why here and there it happens, Appreciate your writing in and for watching Michael
Pulling hard I was taught to fan the independent brake + sand, but our sanders didn't always work, nor did the wheel slip indicator. I did see a photo of rail burn all the way down to the base of the rail, all three axles! I must compliment you, you keep a very nice ROW.
Thanks Matt, this was an unusual circumstance, the operator
knew he was slipping and yet the ground man from Hulcher kept telling him to pull, it was something that never should have
happened,error on both of their parts, but it did and that happens
on RR as you probably well know. do appreciate your writing in
and for watching sir.
@@ccrx6700 you don't have switchers but, I think it was, sw1500 have a hole in the heavy plate that sits on top of the frame for the handbrake chain...guess where all the engine oil leaks go. Right on the second axle and brake rigging. Lots of sand!
@@mattberg916 thanks for info Matt, i have never been around switchers working
I love watching your videos, please explain traction motor.
That's great to hear Kirk. Appreciate the suggestion, I will add
that on my list of future to do videos, although it may be sometime
next year before I can get it shown. Appreciate your stopping by
and taking in the video today my friend.
In the Pentrex video Last of the Giants Vol. 3, they interviewed several of the engineers that ran the 4-8-8-4 Big Boys back when they were in regular service and one of the guys tells the story of how one time the throttle of one of the Big Boys couldn't be shut and the engine cut through the rails! He didn't specify if it was just one set of drivers (8-wheels) or both sets (16-wheels), but either way, that must've sure been quite a scene during the event and after when the engine was moved from the spot on the track. I sure would've like to have had you there with your camera and commentary, Dave. Thanks, buddy!
Wow, that's pretty interesting, thanks for sharing, That had to
be a scary experience for that guy! Here's a vid on tube with lots
of steam wheel slip you might like
ua-cam.com/video/MQKbwiRZ7fY/v-deo.html
Thanks Dave, there was a lot of new clips there that I hadn't seen yet. It sure is entertaining to watch engines slipping, both steam and diesel, but as you've shown, it's very destructive for track and engine. Thanks for steering me to that video.
@@espeescotty 👌
The detail l of attention you give to your miles of railway gives me pause to the thousands+ of miles out there that don't get your level of attention.
Thank you Ted , but we have lots of problens to deal with, hard to keep up with only 2 guys and little dead track time. Do appreciate your writing in and watching 👍
I've seen that a few times. Usually appears in smaller patches from what I've seen. Normally from places where train is stopped and have to restart on a grade on a daily basis. Not sure how much using the sander could help with some spots
Most of ours are much smaller, this was an unusual circumstance
why it so severe, saw a vid on tube some time ago that had all
steam loco wheel slip, it's a wonder some of that rail wasn't burnt
pretty bad. Thanks for watching Sam
Here (SJ-ie Sweden) for example, they got trouble with damaged rail in front of certain main signals in the 50s after the steam engines was replaced with a serie of MaK diesel engines. The only effective cure was to move the signal to a more favorable position.
We had a set of motors drive down almost through the rails. The Engineers backed 2 1/2 engines over them and on into Haugan. We then brought 3 rails out on push cars. Our motor car was able to make it through the burns. Good old Milwaukee Road
Milwaukee Road for life! lol
The good old days! Appreciate your taking in the show today and
for writing in
Thankful
Thank you for watching
I don’t know why I’m here. But this is enjoyable.
Glad you enjoyed, hope you will like more of my RR videos. We
do appreciate your watching
Years ago when I was an operator at a local (now closed) paper mill, we had our road foreman of engines show up and insisted on running the engine (though he never had here). There was a crossing we had to shove coal across where you couldn't stop, the flagger (myself at the time) had to be way out in front and told him this ahead of time. What's he do? Stops even though I'd given him the 'All clear, keep shoving!'. So he stops, then proceeds and I can see sparks flying as he slowly continues on.
Later, when the move was done and we were back at the office, he goes back and looks at the track. He comes back and asks me "Why is the rail burned up back there?"
I loved that job but the amount of idiocy we had to deal with 'those in charge' was amazing.
What a cool story that is, really thank you for sharing it, I can
fully understand your thoughts! That's railroadin, like it or not.
We have the same problem at times... as you can see.
He knew what he had done. He was trying to deflect.
Amazing how much work a railroad is.
A lot goes into maintaining a RR for sure, most folks never
realize just what all is involved, I'm glad to be able to share a small
part of the behind the scenes stuff. Really appreciate your writing in and for watching Tommy
@@ccrx6700 Thank you so much for sharing. As a civil engineer specializing in transportation, the “behind the scenes” stuff is what really interests me.
@@tommyhunter1817 your welcome Tommy, that kinda stuff intrigues me also, wish i had your education
@@ccrx6700 first time anybody has ever said that. LOLOLOL
Your one cool dude! Rail head for life!
Glad you enjoyed the show Chad, appreciate your watching
I never knew trains could do that. My second husband worked for the railroad in Minneapolis. We have coal trains here. Not as many as we use too unfortunately. It's like a investigation! Cool video.
Glad yoy enjoyed the show, appreciate your watching 😊
Saw a picture going around Facebook of a track that looked liked someone tried to do a burn out with a locomotive. Melted deep groves in the track.
I'll bet it did, lot's friction. Appreciate your viewing today's show
I really enjoy your videos! They are always informative. I hope your employer supports you making them!
That said, I understand you are isolated from the U.S. rail network -- does that preclude you from doing any rail grinding?
Thank you Ed for the nice comment and yes management does
know I make these and so far has no problem with it, we are very
fortunate in that, although it does come with some stipulations, there are some things they don't want me making videos of like
other employees faces. Unfortionately rail grinding is out, it sure
would make a difference if we could tho.
@@ccrx6700 great to know! Keep up the good work!
"This is railroadin'!"
@@edtompkins865👍
This Video is a good one
Thank you Raymond, glad you enjoyed today's show sir
Those flakes look like one of my cold chisels. Thanks for sharing
Your welcome Adrian, appreciate your watching
You be sure to grind off those flakes.......keep the head clean before a strike piece comes flying off
@@johndonaldson3619 will do John, appreciate your thoughtfulness 😊
Hello there. Love the videos, you sound just like my grandfather did when you say crick. Do the engine wheels get damaged as well?
Crick ...southwestern Pennsylvania-ese, and if my relatives from
Baltimore were here they would tell you the crick was filled with
wooter, not water...LOL Glad you are enjoying and thank you for
watching
I enjoyed your presentation, Dave.If I understand what happened, in an attempted work around to reoair the derailment, several sections of rail were flattened. What was the cost to make the repair vs waiting for the equipment to cross the creek and make the repairs the normal way? While I am not a bean counter, I do know how attempts to do a work around can prove more costly. Thank you for sharing your knowledge.
You make a very good point Shirley. I was not there when they
did that, but you are right, it sure would have made better sense
to get the side booms up there first, they had to come up anyway
to put the derailed loco back on. But those guys got in a big
hurry and you see what happened.
There are 3 wheelslip Transducers WST 14, WST25, WST36 . These measure current on the traction motors . The WS card dects a current inbalance and will knock the load off and then apply sand and can disable the pair of motors. The engineer can go and use the The Traction motor switch and cut the pair all the way out .
That's rail roading. Gotta love it.
Yep John! What not to love, appreciate your watching sir
They don't call locomotives "the power" for nothing. That is amazing how quickly they can dig into that hardened steel rail. I may have missed it but is there going to be any changes to how often the center bowl lubrication is done on the trucks? I saw the video with the dry bowl.
You got that right Jeff, and so far they only gonna keep what they
have been doing, just lube when a truck set is changed, but we got some new management coming in and things may change, we will
wait and see. Thanks for writing in and watching my friend
@@ccrx6700 I hope that they make some wise changes. It seems like this one accident could have paid for a whole lot of lube. But making changes sure can be an uphill battle no matter how much sense they make.
That is crazy!
Yep, pretty wild stuff, thanks for watching the show today
Another fantastic video Dave.Hope you have copyright as I’m sure a rail training school somewhere would love to use these videos and explanations.You are to nicer man to say it but maintainence issues seem to be the causes of these problem that’s wagons and locos not the track.Stay safe and healthy mate👍🏴🇬🇧
Thank you for the very nice comment Tim, actually there have been
several guys with big railroads who have written me and said
they sometimes use these videos as training films for their new
hires, that totally amazed and flattered me for sure. There a long story here, but our last company was in huge cost cutting mode and
a lot of things got neglected, our new owners are spending money
on getting things fixed, which is a really good thing.
Nice Freightliner you get to ride around in.
Needs heated seats...LOL Thanks for writing in and for watching
@@ccrx6700 😆 she also needs a bunch of chicken lights and chrome. 😉
Those are fun anchors 😂