Thanks for the shout-out Jeff. Just a quick clarification. We will indeed record on the 24th but we still have to do post-production editing and we usually release the 26th of each month. Having said that, the episode we record tomorrow will be available on November 26th so that we have enough time to edit.
Thank you! It came out immaculate and it looks amazing! I definitely like looking at them when I’m done lol they look like a work of art! Hope all is well to you and your family as well!
Looking forward to picking up the KSE this weekend glad it’s done thanks for doing my 420 580 raw and kraken and 700 raw nitro looking forward to the future
I have the same model and it has a really bad vibration even in a hover. I got it used with only 10 flights on it. Blade tracking was spot on setup was great. Guess I need to balance the blades. Amazing model despite my gremlin issue
Hi Jeff. My Battery retaining Clip broke on my 570. I've removed all Battery tray screws, looking like I'm going to have to take the Landing Gear off, so I can remove the Battery Tray and screw the Clip on the other side of the Heli. I Love SAB but sometimes they are a little bit of a pain! lol
Hello, I'm wondering what you set differently in the ikon for the 3 blade and tail from the two blade. I've got a Goblin 630 Competition with 3 blade setup and wondering what you change. Cheers
Hello, so you just need to select Three Bladed head in the software and you will probably have to lower cyclic gains a little bit. I had to lower P and D gain on elevator for Idle up 2 (high head speed)
I have a question, so do you need to buy a separate yellow wire to plug into the P port of the ESC That then goes into the Ikon 4,5,6 channel? And also, where does that single yellow wire coming from the ESC go to?
Yes, you have to supply your own wire. It is just servo wire that I cut down. Yes, P port from the ESC goes to CH 5 from the 4-5-6 port. The yellow wiring coming from the ESC goes to governor port as it’s a RPM wire.
Sorry one more question, does the Yellow wire that goes from the ESC P port to the 4,5,6 Channel allow for you to set the governor head speeds in the Ikon? Sorry I’m just a little confused on how you can use the Governor in the Ikon. Also thanks so much for your time!
@@pumagaming2482 no, the wire going from the P port to CH5 of the 4-5-6 port is only for telemetry. The Yellow RPM wire that I tie into BEC power and plug into the Governor port is what allows you to set the head speed in the iKon.
How do you check the cg with a three bladed heli? One blade along the boom, and the other two blades "forward"? It doesn't say anything about that in the manual. And I haven't found anything when I google. Still waiting for the motor to show up for My RAW KSE.
I plan on making a video about the proper way to balance your helicopter. But, no, you pick the helicopter up by the head and hold it on its side. So it doesn’t matter if it’s a two or three bladed machine, you balance it the same way by holding the head of the helicopter straight out with the helicopter on its side blades vertically but on a three blade you were just kind of put the blades however, you can get them.
Thanks for the shout-out Jeff. Just a quick clarification. We will indeed record on the 24th but we still have to do post-production editing and we usually release the 26th of each month. Having said that, the episode we record tomorrow will be available on November 26th so that we have enough time to edit.
Awesome! Thanks for clearing that up. Looking forward to recording our episode tomorrow!
Definitely another Beautiful Goblin RAW and Another Incredible Build!
Happy Maiden my friend and my best to You and your entire Family!
❤️🙏🙏🙏🙏🙏🙏❤️
Thank you! It came out immaculate and it looks amazing! I definitely like looking at them when I’m done lol they look like a work of art! Hope all is well to you and your family as well!
I’m in love with this build. I definitely need one just like this one
So Nice that u show us this build🤝😁
Looking forward to picking up the KSE this weekend glad it’s done thanks for doing my 420 580 raw and kraken and 700 raw nitro looking forward to the future
I have the same model and it has a really bad vibration even in a hover. I got it used with only 10 flights on it. Blade tracking was spot on setup was great. Guess I need to balance the blades. Amazing model despite my gremlin issue
What head speed are you running at? A lot of the times a low head speed will cause a vibration as well.
@@westhobbiesrc8051 I put a 19t pinion on it. 1680-2000 is the HS at 70-85% gov
Was looking forward for this :)
Maiden flight video next!
Hi Jeff. My Battery retaining Clip broke on my 570. I've removed all Battery tray screws, looking like I'm going to have to take the Landing Gear off, so I can remove the Battery Tray and screw the Clip on the other side of the Heli. I Love SAB but sometimes they are a little bit of a pain! lol
Sometimes they could definitely be a pain! And it’s always the simplest things that you have to do so much to fix lol
Very nice job
Thank you!
That build is clean damn. I am just done with my piuma
The components i used is
130a hobbywing
4525 560kv xnova
Torq hde 2208 and 0704T
Might get the white canopy
It came out great! I know I am very happy with it! That is a perfect set up on the piuma 700 pretty much identical to what I’m running.!
Really nice 👍
Thank you!
You welcome.
Hello, I'm wondering what you set differently in the ikon for the 3 blade and tail from the two blade. I've got a Goblin 630 Competition with 3 blade setup and wondering what you change. Cheers
Hello, so you just need to select Three Bladed head in the software and you will probably have to lower cyclic gains a little bit. I had to lower P and D gain on elevator for Idle up 2 (high head speed)
I have a question, so do you need to buy a separate yellow wire to plug into the P port of the ESC That then goes into the Ikon 4,5,6 channel? And also, where does that single yellow wire coming from the ESC go to?
Yes, you have to supply your own wire. It is just servo wire that I cut down. Yes, P port from the ESC goes to CH 5 from the 4-5-6 port. The yellow wiring coming from the ESC goes to governor port as it’s a RPM wire.
Do you connect the Yellow RPM wire along with the BEC wire, and then plug it into the GOV port?
@@pumagaming2482 yes I do. No need to tie up two ports.
Sorry one more question, does the Yellow wire that goes from the ESC P port to the 4,5,6 Channel allow for you to set the governor head speeds in the Ikon? Sorry I’m just a little confused on how you can use the Governor in the Ikon. Also thanks so much for your time!
@@pumagaming2482 no, the wire going from the P port to CH5 of the 4-5-6 port is only for telemetry. The Yellow RPM wire that I tie into BEC power and plug into the Governor port is what allows you to set the head speed in the iKon.
How do you check the cg with a three bladed heli? One blade along the boom, and the other two blades "forward"? It doesn't say anything about that in the manual. And I haven't found anything when I google. Still waiting for the motor to show up for My RAW KSE.
I plan on making a video about the proper way to balance your helicopter. But, no, you pick the helicopter up by the head and hold it on its side. So it doesn’t matter if it’s a two or three bladed machine, you balance it the same way by holding the head of the helicopter straight out with the helicopter on its side blades vertically but on a three blade you were just kind of put the blades however, you can get them.
@@westhobbiesrc8051 Ahh, ok! I have always done it this way: ua-cam.com/video/oTXOnNsnFzk/v-deo.html
Please show it with the blades folded in the blade holder.
Where can I find the tail boom antenna mount that's 3D printed?
I made it, it’s my own design.
@@westhobbiesrc8051 Is it available for download?
@@SurajChandiramani unfortunately no it’s not as of now. I’m working on it.
Finally first! Lol
Why did you ruin it :(. Jk gj man
Awesome! I’m glad you were finally first lol