Source Code:create.arduino.cc/editor/mertarduinotech/5d77b4bc-d24f-4f14-b887-fa08050e4baf/preview Recommended Items: Use Your Muscles in Project - amzn.to/3fXtMnL 37 Sensor & Module Packages - amzn.to/3m66WeQ Try this Robot Arm - amzn.to/3fq8DCl Best Resin 3D Printer - amzn.to/39tY8KB Arduino Compatible Kits - bit.ly/2J2AFF7 Banggood Spring Sale - bit.ly/3slMbOn
I dont know why but mine EMG sensor burned when I connected the 2x 9v, do you know whats wrong? Negative of battery 1 to the (-) on the sensor, connected pos and nagative (ground) and pos of battery 2 to the (+)
Mert Arduino Do you happen to have the schematic for the board because the emg sensor isnt picking up a signal, so I think I may have screwed up the wiring
Do these sensors only work on large muscle areas like in the arms? I had this weird idea for using sensors like these to change the colour of an LED array in a costume, but using the sensors attached to the forehead (under a bandana or something) so that when the wearer frowned, the lights in the costume changed from say blue to red.
Çok güzel bir proje elinize sağlık. Aynı sensörden ben de aldım. Fakat değerler çok değişken sağlıklı değil. Sensörlere birşey sürülüyor mu sıvı? 3 sensör var R R ve L bunlar hangisi nedir. Bazı projelerde sadece ikisi kullanılmış.
MERT Arduino & Tech I am having trouble finding the muscle sensor chip that you used in the video. Do you have any links on where I can find one? Thanks
Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Uno" Sketch uses 3138 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 229 bytes (11%) of dynamic memory, leaving 1819 bytes for local variables. Maximum is 2048 bytes. An error occurred while uploading the sketch This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
it's possible to make that the speed of a motor, increase and decrease in proportional way compared to the force that you makes with your arm? greetings from Mexico!!!
hola que tal una consulta y si queres habilitar todas las salidas pwm para q cumplan la misma funcion? osea para poner mas servos q hagan lo mismo... como seria el codigo?
I have set this up exactly the same way as you have in the video - My muscle sensor reads between 0 and 1. - I can't seem to get this to work correctly. I am using the exact same sensor and an Arduino UNO and literally copied and pasted your source code (as well as other peoples and tried initially to use an ESP32 chip) Any idea what I'm doing wrong?
Hi i used what you are doing but sometimes i just have 0 and 1 and 2 in the monitor series i don't undersand ? And sometimes i have 500 700 what is the meaning of these values please.
I was using one of these to make an EKG but my girlfriend has muscular dystrophy and I’d much rather use it to make a motor assisted knee brace. Anybody recommend any resources I can use to learn more about servo and stepper motors? I’m still fairly new to arduino and raspberry pi
Hello i'm trying to reproduce it myself but and i'm stuck to the code part the link given in the description doesn'tWork anymore is there any way i can have it again that would be really nice. Thank you.
üstad kolay gelsin bir servo motoru arduino ve flex sensör yada emg sensör kullanılarak kontrol edildiğini gördüm ancak bu servo motorlar orta konumda iken sola ve sağa hareket ettiklerini görmedim, yani demek istediğim bir adet flex sensör ile ilişkilendirilmiş bir servoyu pilli bir aracın ön tekerleklerine bağlayıp sag sol yatırtmak mümkün mü ? youtube deki videolarda bulabildiklerime göre proje yapıcak olsak sensör gerilimi algılayınca araç misal sağa dönüş yapacak ve sensör gerilimi ortadan kalkınca tekrar tekerlekler düzelicek ben istiyorum ki bu servo orta konumda olsun ben uzaktan kumanda ile kontrol etmeyeyim aracımı eldiven yapayım parmağımı yukarı kaldırınca sağ aşağı basınca sol yapsın. dersenki bir servo için o zaman 2 flex lazım yada emg sensörü 4 tane lazım sorun değil ama nasıl yapabiliriz bizi bilgilendirebilirseniz seviniriz.
İyi günler projeleriniz çok başaralı. Bende bu tarz şeyler yapıyorum.Size bir şey sormak istiyorum voice module ile ilgili. Module Bana erken lazım da nasıl tedarik edebilirim ya da siz de fazla varsa ücreti karşılığında alabilirim. Veya nasıl iletişim kurabiliriz. Şimdiden teşekkürler
Merhabalar. Biraz bu videodan alakasiz olacak ama, rx ve tx pinlerine birden fazla modul baglayip kullanabilir miyiz? (Nextion lcd ekran ve gps modulu)
I have a sensor like this, but the value doesnt change when I move my arm. Could someone please help me???? ps: the circuit is placed like in the video.
hola!ns porq pero en el serial monitor me va súper rápido,es decir las subidas y bajas van muy rápido ,y no me detecta al cerrar el puño y al abrirlo,pero sí q al ir tocando un poco el sensor emg varían los números,puede ser q el sensor esté roto?
Sir I am having one problem That I want to build a robotics hand but I couldn't do this. Because I am not having 3D printer. Is there is any online website to make a 3D design for me. In my house they would not allow to buy 3D printer. Because of it's expensive.... So please give me some ideas to build new designs Thanking you sir
first of all check your "COM" in "ARDUINO IDE" for this go to tool then com then there will be 1 option select that then check that it is compiling or not
@HUZAIFA SHAUKAT bro i totally made it self. I made wooden hand and its finger also made with wood. For finger pulling i used mg96r servo motor. Same sensor used which mentioned in video.
you have to write an arduino code that reads the value and then chunks up the values in small parts so that with if-sentences you could create conditions for the servos to move
Source Code:create.arduino.cc/editor/mertarduinotech/5d77b4bc-d24f-4f14-b887-fa08050e4baf/preview
Recommended Items:
Use Your Muscles in Project - amzn.to/3fXtMnL
37 Sensor & Module Packages - amzn.to/3m66WeQ
Try this Robot Arm - amzn.to/3fq8DCl
Best Resin 3D Printer - amzn.to/39tY8KB
Arduino Compatible Kits - bit.ly/2J2AFF7
Banggood Spring Sale - bit.ly/3slMbOn
Hi! Can you use smaller muscle movements like small finger movements? Would be Great for people with muscular dystrophy.
I dont know why but mine EMG sensor burned when I connected the 2x 9v, do you know whats wrong? Negative of battery 1 to the (-) on the sensor, connected pos and nagative (ground) and pos of battery 2 to the (+)
Mert Arduino Do you happen to have the schematic for the board because the emg sensor isnt picking up a signal, so I think I may have screwed up the wiring
Do these sensors only work on large muscle areas like in the arms?
I had this weird idea for using sensors like these to change the colour of an LED array in a costume, but using the sensors attached to the forehead (under a bandana or something) so that when the wearer frowned, the lights in the costume changed from say blue to red.
Hi Mert. Is it possible to play a sound on a headphone when contracting a muscle? I want to build a biofeedback thing to stop my teeth grinding.
Thanks for the great video! Are the electrodes you used reuseable or do you have to use new ones every/ every few times?
Reusable for the same person for a few times if you don't care much about sweat and hygiene
Çok güzel bir proje elinize sağlık. Aynı sensörden ben de aldım. Fakat değerler çok değişken sağlıklı değil. Sensörlere birşey sürülüyor mu sıvı? 3 sensör var R R ve L bunlar hangisi nedir. Bazı projelerde sadece ikisi kullanılmış.
MERT Arduino & Tech I am having trouble finding the muscle sensor chip that you used in the video. Do you have any links on where I can find one? Thanks
can i use this to controlling a robotic hand? i wanna do a arm that just moves and open/close the cand
Arduino: 1.8.9 (Windows Store 1.8.21.0) (Windows 10), Board: "Arduino/Genuino Uno"
Sketch uses 3138 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 229 bytes (11%) of dynamic memory, leaving 1819 bytes for local variables. Maximum is 2048 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
heey, i tried making this but i the serial monitor only gives me a value of 0. I don't know what I'm doing wrong? Can someone help me?
I would like to know how does the muscle sensors work
can you make an explanation please
CAN YOU PLEASE TELL ME FROM WHERE HAVE YOU DRAWN YOUR CONNECTION DIAGRAM
Can you please make a review on the following sensor, Gravity: Analog EMG Sensor by OYMotion.
omg please, i have the same sensor, u could find how to control the servo with that sensor? i apreciate if u give some information :D
Hello, congratulations on the video!
Did you use any type of filter for the analog signal from the sensor?
Please publish the next video(how to control a robot hand with the emg sensore
it's possible to make that the speed of a motor, increase and decrease in proportional way compared to the force that you makes with your arm? greetings from Mexico!!!
I am doing the same project but i have as issue my signal is not changing with respect to motion.?What should i do?
I am also suffering from the same problem. Have you found a solution ?!
It is perfect! Only this i tell you !! Well done !!!
hola que tal una consulta y si queres habilitar todas las salidas pwm para q cumplan la misma funcion? osea para poner mas servos q hagan lo mismo... como seria el codigo?
Hi after coding can we use arduino,muscle sensor without computer direct use??
Someone have got the datasheet of the EMG SENSOR?? I want it
Ty
I have set this up exactly the same way as you have in the video - My muscle sensor reads between 0 and 1. - I can't seem to get this to work correctly. I am using the exact same sensor and an Arduino UNO and literally copied and pasted your source code (as well as other peoples and tried initially to use an ESP32 chip) Any idea what I'm doing wrong?
To check.
- Hardware set up.
- Software set up.
Check them one by one until you find the problem.
I'm also facing same problem whether you find the solution
I wanna ask about this project. Can I use 1 battery for pin VS?
I want to check my muscle activity by simulation software, so which software is best?
Merhaba yüzey elektrotlarını nerden aldınız acaba?
That is so cool! The only thing keeping away from trying it is the price
Hi i used what you are doing but sometimes i just have 0 and 1 and 2 in the monitor series i don't undersand ? And sometimes i have 500 700 what is the meaning of these values please.
I was using one of these to make an EKG but my girlfriend has muscular dystrophy and I’d much rather use it to make a motor assisted knee brace. Anybody recommend any resources I can use to learn more about servo and stepper motors? I’m still fairly new to arduino and raspberry pi
sir can you please upload the wireless version of the same😊
I have ecg sensor May I use ecg sensor also for it not emg?
Hello i'm trying to reproduce it myself but and i'm stuck to the code part the link given in the description doesn'tWork anymore is there any way i can have it again that would be really nice.
Thank you.
Hi! So cool video. It's so fantastic
I would like to know how to do a robot hand with EMG.
Did you post it ? Where is the link ?
Thank You!!!!!!!!!!
üstad kolay gelsin bir servo motoru arduino ve flex sensör yada emg sensör kullanılarak kontrol edildiğini gördüm ancak bu servo motorlar orta konumda iken sola ve sağa hareket ettiklerini görmedim, yani demek istediğim bir adet flex sensör ile ilişkilendirilmiş bir servoyu pilli bir aracın ön tekerleklerine bağlayıp sag sol yatırtmak mümkün mü ? youtube deki videolarda bulabildiklerime göre proje yapıcak olsak sensör gerilimi algılayınca araç misal sağa dönüş yapacak ve sensör gerilimi ortadan kalkınca tekrar tekerlekler düzelicek ben istiyorum ki bu servo orta konumda olsun ben uzaktan kumanda ile kontrol etmeyeyim aracımı eldiven yapayım parmağımı yukarı kaldırınca sağ aşağı basınca sol yapsın. dersenki bir servo için o zaman 2 flex lazım yada emg sensörü 4 tane lazım sorun değil ama nasıl yapabiliriz bizi bilgilendirebilirseniz seviniriz.
nice job, i waiting Impatiently how to control a robot hand
İyi günler projeleriniz çok başaralı. Bende bu tarz şeyler yapıyorum.Size bir şey sormak istiyorum voice module ile ilgili. Module Bana erken lazım da nasıl tedarik edebilirim ya da siz de fazla varsa ücreti karşılığında alabilirim. Veya nasıl iletişim kurabiliriz. Şimdiden teşekkürler
Can we use more then one servo
Merhabalar. Biraz bu videodan alakasiz olacak ama, rx ve tx pinlerine birden fazla modul baglayip kullanabilir miyiz? (Nextion lcd ekran ve gps modulu)
where is the emg controlled prosthetic hand video?
БОГ ЕСТЬ ЛЮБИТЕ БОГА И СВОИХ БЛИЖНИХ!!!
Use brain wave band to control wheelchair and also you can make an artificial hand that can help disable person
Hi, I'm having a problem in which the serial monitor doesn't show any values, does anyone know how to solve it??
Do we have to include any library for it
Nice job... and if I want 2 servomotors?
cual es el nombre del sensor muscular?
I have a sensor like this, but the value doesnt change when I move my arm. Could someone please help me????
ps: the circuit is placed like in the video.
Same here bro
Up
does your problem resolved?If so,can u plz help me.. to solve mine
No, it didnt
I requested refund
mert abi bu sensörden bende almak istiyorum ama ilerde bir sorun çıkartıyor mu acaba diye bi sana sormak istedim. Lütfen cevabını bekliyorum abi.
hola!ns porq pero en el serial monitor me va súper rápido,es decir las subidas y bajas van muy rápido ,y no me detecta al cerrar el puño y al abrirlo,pero sí q al ir tocando un poco el sensor emg varían los números,puede ser q el sensor esté roto?
Hii how can contact you because I need to how to make this for my clg project
Can you see the muscle activity as a graph,and not just voltage numbers?
The output stays under 5v even with +/-9V input ??
Nice video! Why aren't you making more? Waiting for your next video.
Sir I am having one problem That I want to build a robotics hand but I couldn't do this. Because I am not having 3D printer. Is there is any online website to make a 3D design for me. In my house they would not allow to buy 3D printer. Because of it's expensive.... So please give me some ideas to build new designs Thanking you sir
Anyone understand why we using 9v. Because my sensor's supply volt is 3.5-5v
Hii can you tell me what the name of the blue device that you put on the breadboard a the 1:20 minute 😿😿?
Arduino nano
How can I get the prosthetic hand
can i get the raw emg values from the board ?
Please can u make reviews of aurdino kits
Fianllllllyyyy!!!! Someone who explains things!!!
sir cant we make. wolworine claws by this feature
I followed the steps, and copied the code but my signal is not moving the servo??
where can i buy Disposable Surface Electrode
Please create a video on how to create wireless robotic hand with this sensor amd please use 3d printed robotic hand
Does any Arduino model work for this
always be my best teacher
Sir i have done your obstacle avoiding robot it is not working the code doesnot compile please help me
first of all check your "COM" in "ARDUINO IDE" for this go to tool then com then there will be 1 option select that then check that it is compiling or not
Very much needed video for mei
*Can I use ecg sensor module for the same project?? *
No
Why am i always getting the max value out of the sensor?
Can someone tell me why you need to connect the arduino to a computer for the servo to work?
una duda se podria conectar con matlab a este proyecto?
Plz teach us how to make own muscle sensor sir
Puedes hacer un proyecto con relés y el modulo GSM de arduino Uno, controlar mediante sms
Please can you help us out with using this output of servo motor in any applications.. Please 🙏🤗
Thank you.. :)
I'm eager to see ur next video
Can i use arduino uno?
can i know actually the value 298 296 meaning?
kasını ya sıkıyorsundur ya sıkmıyorsundur tabi ama sersörler analog sinal alabiliyormu biraz sıkma gibi
I have some problems
Its not working at me =(
control robot hand with emg sensor...please publish this video
next video when ???
controlling hand with emg sensor
I use the same sensor but the output of signal is a random... What is the solution of this problem
I am also suffering from the same problem. Have you found a solution?!
plz make a video how to make temperature sensor with an arduino nano
I love u man....😍
U r amazing......
Thanks alot for helping me....😊
Ok when u make this project again with robot hand...
@HUZAIFA SHAUKAT yes i made one
@HUZAIFA SHAUKAT how may i help you
@HUZAIFA SHAUKAT bro i totally made it self. I made wooden hand and its finger also made with wood. For finger pulling i used mg96r servo motor. Same sensor used which mentioned in video.
my ECG electrode cant detect my arm movement, can anybody help?
I made an EMG circuit and used your code to run it. But somehow it's not runnings
Amazing! Thank you for Sharing
Can you make domotic house with arduino
plz make a video on how to control room lights with phone via Bluetooth
Source code page is broken
thank you so much!!
Very good!!! 😊😊😊
Keep up the good work!
nice series mert
make a robot from this
i am currently now making robot from this sensor
Amigo me ajuda, como faço a ligação do motor?
Koluna takınca seruma benziyor :D süperrrr ❤❤❤❤❤❤❤❤❤
how do i put the code in?
Videolarına Türkçe altyazılı eklesen hani Türk olduğunu unuttun herhalde
How do I control 2 servo with one EMG sensor?
you have to write an arduino code that reads the value and then chunks up the values in small parts so that with if-sentences you could create conditions for the servos to move
next please make CNC from old dvd player