The techniques you use have produced a beautiful piece. If I had not watched it I might think it's wood at various stages. I hope you keep posting stuff like this I enjoy the information as well as ideas for things to make
Love love love this. I think it would look amazing on a floor. Go back afterward and spray paint in some lines to make it look like a wooden floor. Wow.
I see other brands videos use a blowtorch to move the paint around where needed to achieve different looks. can you use that same technique with Leggari Products or would that damage or alter the look of your product.
Going to do our countertops, island, and kitchen table. Are there any examples of doing cabinets? I want to paint our island base as the 90's walnut has worn out it's welcome. This is awesome. Just discovered Y'all tonight!
We do not have a video on the cabinets because this is a product that can't be applied vertically. You could take the doors off and apply the epoxy horizontally then hang them back up. Thanks
Whoah! I'm a fluid paint artist but have not yet ventured into epoxies. I came across this video and Wow, the results of this table are stunning. (I just subscribed to your channel) Question: with all those guys around, I was dying for you to lift and tilt the table to see if the expoxy lines would flow a bit and create some additional organic effects? Also, have you (or do) you ever use a heat gun to move the freshly poured epoxy? Looking forward to learning more about Leggari!
The metallics will flow together and give it a different look as the epoxy is curing. We have a high end epoxy that has an additive in it to make the bubbles rise to the surface and pop on their own. Thanks
What is the difference between your epoxies and marine epoxies? As I what is the chemical or molecular difference? It looks to me like yours has a thinner added, but is this all? Thanks in advance. Beautiful work!
Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating.
Yes you can apply the epoxy to any hard surface, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
Seus vídeos são os melhores!! Parabéns. Só uma dúvida, como você faz para deixar a resina totalmente nivelada depois do trabalho com a espátula e aplicação de água?
Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating. Thanks
What do you do with when the top coats dry and its got a glass finish but little dots caused by air born dust ect that falls on the surface during the curing time ??? Im yet to see a video with wat to do ..it just seems everyone shows the top coat pour and boom its finished ... but iv seen 1st hand how poor it looks with the little bits sat on top thats from the air :(
I couldn't stop but wonder how the final texture would turn out as well!! It is not mentioned, so I imagine this does leave a texture as if it didn't I would really expect he would have noted that.
A granite marble , Tile counter top , starts with a rough top im thinking that ,in the Epoxiests , its a smooth or nice top , what material is it , ?!? Finish carpenter plywood , i gotts ta know bro
You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Order Counter Kit Here, then follow the steps.
The base coat , must be perfect , like a mirror , and all the other come out ,very nice .
Yes! Thank you!
The techniques you use have produced a beautiful piece. If I had not watched it I might think it's wood at various stages. I hope you keep posting stuff like this I enjoy the information as well as ideas for things to make
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Wow!! Amazing! Wonderful blend of colours!
5th time watching this project.....fantastic
Absolutely outstanding work.
I've just been addicted to watching all these videos... 🍀🍀🍀
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Outstanding work!
Great work! Looks so natural and it really would look great on a floor as well!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
I LOVE THIS TABLE!
Love love love this. I think it would look amazing on a floor. Go back afterward and spray paint in some lines to make it look like a wooden floor. Wow.
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Beautiful natural wood grain look.❤️👍🏼
That is gorgeous. Hoping to be ordering a kit from you soon 🤗
I am obsessed with your products and want to do every hard surface in my house!😂
Thats beautiful. I want to fo my cpunter counter tops like that
Me too. I love tghis stuff and have looked at a lot of other epoxy products.
its like road work, one guy working and three to watch, but your project looks better than any road I've ever seen.
Thanks for watching the video Lee
This is freakin money $$$$$$$$$$$ Love it
We do too, thank you!
Absolutely amazing. I love this stuff. Ordered a sample today cannot flipping wait!!!
Awesome, good luck with the sample kit when you receive it. Thanks
That was a joy to watch. Beautiful work dude. Loved it.
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Sweet liked how you had the guys leaning on the chairs watching
Oqui é isso qui ele coloca por ultimo esse spray ?
Serve para tirar as bolhas de ar????
Come on, someone has to hold the chairs up. Just like road workers, they need 12 guys to hold the shovels
Looks great!!!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
How much epoxy did you use on this table?
That is remarkable!!!
Thanks for watching the video
Beautiful! I really love those colors together!
Hey mate is the first coat of black epoxy dry before you add the coloured strips
Thanks bro
very pretty, did you tape the under side of the table, what about the drips?
Magnifique!!merci pour la démo 👍🏽
Thanks for watching the video
Awesome guys. That’s a beauty
any paint roller will work same way...?
Bad ass Boyzz 🤗👊🏽
Thank you!
I see other brands videos use a blowtorch to move the paint around where needed to achieve different looks. can you use that same technique with Leggari Products or would that damage or alter the look of your product.
Yes you can use a blowtorch to move the metallics around.
online.flippingbook.com/view/364043
hello, the base can be wood and mdf's as well, right ... only this is we have to use priemer first for epoxy to bond..
That product is amazing..
Is it important to apply primer on wood
Can you do this with a floor?!
Would you put a clear coat over this? Or is it fine like this? Is clear coat only for floors or countertops?
Amazing.
Thanks Jose for commenting and for watching the video
I get fine pits when I use alcohol spray, do you do a flood coat to eliminate that?
Wawww..... I am from Argentina...
Thanks Miguel from Argentina for watching the video
Gorgeous
Thanks Sheryl for the comment.
Going to do our countertops, island, and kitchen table. Are there any examples of doing cabinets? I want to paint our island base as the 90's walnut has worn out it's welcome. This is awesome. Just discovered Y'all tonight!
We do not have a video on the cabinets because this is a product that can't be applied vertically. You could take the doors off and apply the epoxy horizontally then hang them back up. Thanks
Amazing work guys! Did you put a clear coat on top of that? It looks so level and perfect.
Yes he did apply our glaze top coat.
@@LeggariProducts Thanks a ton for the reply.
amazing...you are the one!!!!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
That table is it someone house or is an office?? Is huge but sooo lovly colours loves dem ❤️❤️❤️❤️
That is somebody's table at their house.
hey guys, what colors did you use in this video? I tried with the khaki but doesn't look the same.
Very beautiful
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Whoah! I'm a fluid paint artist but have not yet ventured into epoxies. I came across this video and Wow, the results of this table are stunning. (I just subscribed to your channel) Question: with all those guys around, I was dying for you to lift and tilt the table to see if the expoxy lines would flow a bit and create some additional organic effects? Also, have you (or do) you ever use a heat gun to move the freshly poured epoxy? Looking forward to learning more about Leggari!
The metallics will flow together and give it a different look as the epoxy is curing. We have a high end epoxy that has an additive in it to make the bubbles rise to the surface and pop on their own. Thanks
Amazing
Thanks for sharing this technique
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Very nice ...Sana from Algeria
How did you keep the drips off the bottom? OR do you sand them off?
You will want to scrape them as you go along but if they are still there the next day then you will just sand them off.
What is the difference between your epoxies and marine epoxies? As I what is the chemical or molecular difference? It looks to me like yours has a thinner added, but is this all? Thanks in advance. Beautiful work!
Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating.
excelente trabajo que le pone de fondo a la madera es resina también pero con un fondo gris gracias
I hope you guys are defuzzing those roller covers. Or are you using special roller covers?
Yes we are shedding the nap rollers with masking tape to remove the loose fibers. Thanks
I’m wondering if you could give me a list of your kits? Thanks
You can go to our website at www.leggari.com and under the ordering process we have a list of kits.
What kind of color do you use ?
Water based or solvent based ??
He is adding metallic powder to the epoxy to color it.
Fantástica
Is thisntypenof epoxy can be used like on a deck of a boat ?
Yes you can apply the epoxy to any hard surface, take a look at our brochure to see all the different applications. Thanks
online.flippingbook.com/view/364043
gorgeous!!!
Thanks for watching the video
Hello friends, how are the base that they put in the wood after sanding ir good night ?
The epoxy will leave a high gloss smooth finish on the surface.
mr, im from indonesian, , good jobs, very2 cool
Thanks for watching the video.
The maximum!!!!
Buenísimo.....👍👍👍👍👍👍
Thanks for the thumbs up and for watching the video
can you make one to mirror the clouds of jupiter? I want to do that in my kitchen
Where store in USA buy that epoxy and all equipment for this gob?
How hard would it be to recreate this look on a floor or is it possible to make a "wood" looking floor other than this way?
Seus vídeos são os melhores!! Parabéns. Só uma dúvida, como você faz para deixar a resina totalmente nivelada depois do trabalho com a espátula e aplicação de água?
The resin should self level. You can always apply heat to help it "run" but the downside of heat is that it will kick the resin sooner as well.
can you please tell me what you were spraying ?
He is using isopropyl alcohol to give it a dispersing effect. Thanks
what if you used a rake lol, also how much would you charge for something like this, no breakdown just the final price
Hola buenas noches donde podre comprar su producto en mexico o hacen envios?
how long this epoxy last?is this durable ?
Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating.
Thanks
Hi from Venezuela, I LOVE your work, you are artist, but i need one video in spanish!
Great video top job 👍
What is the under coat, paint?
We applied a primer first before we did the epoxy. Thanks
would any of these products hold up to the elements outside
This is not for outdoor applications, they are coming out with an outdoor application later in the year. Thanks
Any particular brand of alcool when spraying on top of epoxy? Great video by the way
You want to use isopropyl alcohol to give it the dispersing effects. Thanks
Do you let the product dry between each application?
Once you apply the base coat you immediately fallow with the highlights so you can still work with the epoxy. Thanks
How many square feet would a sample size cover? I’m wanting to cover a 4X3 foot dresser top.
One sample kit will do 1x2 sq. ft. Thanks
Como faço para comprar o seu epóxi?
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Is there a way to do this inside of a sink.
Yes we have had customers apply it to their sink, you just need to scuff it up really good with 80 grit and make sure you remove the drain. Thanks
No top coat needed on your epoxy products??
You don't have to use a top coat but we do recommend putting one on for more durability. Thanks
That's really cool, thanks for sharing this awesome bit of information! love your vids, subbed
Thanks for watching the videos
After you sand the table 39 seconds into the video you start to roll a topcoat , is it just grey primer or black paint or what is it?
It's a Primer. They charge you a ton of money for it too in their kits.
What's the name of the stuff you spray on it for the natural look effect.???
We use isopropyl alcohol to give it a dispersing effect. Thanks
What do you do with when the top coats dry and its got a glass finish but little dots caused by air born dust ect that falls on the surface during the curing time ??? Im yet to see a video with wat to do ..it just seems everyone shows the top coat pour and boom its finished ... but iv seen 1st hand how poor it looks with the little bits sat on top thats from the air :(
You can sand the surface with 220 grit using a palm sander then clean with denatured alcohol then re-apply a new top coat.
How safe. Are those chemicals ??
I notice no protective clothing or masks are worn
The product is very low VOC’s meaning it has little to no smell at all. It’s 100% solids so there’s no toxins evaporating in the air.
Seen a few videos , where you don't use masking tape . ?
What's that spray?
He is using isopropyl alcohol to give it a dispersing effect.
The exposed carpet was my main focus. I kept watching your feet lol
Thanks for watching the video
Is it perfectly smooth after isapropal alcohol applied
I couldn't stop but wonder how the final texture would turn out as well!! It is not mentioned, so I imagine this does leave a texture as if it didn't I would really expect he would have noted that.
0:41 what's this? is this paint? if yes then what kind of paint?
We add metallic pigment to our epoxy. It is Leggari brand. Thanks
Amazing
is it color all metalics?
what's in that spray bottle?
We use isopropyl alcohol to give it a dispersing effect. Thanks
The one is paint epoxi?
We add metallic powders to our clear epoxy to color it. Thanks
Yes i think this ( add comment ) is an upgraded chat room.
Not sure what that means but thanks for watching!
A granite marble , Tile counter top , starts with a rough top im thinking that ,in the Epoxiests , its a smooth or nice top , what material is it , ?!? Finish carpenter plywood , i gotts ta know bro
So what kind of board is installed before the base coat goes on
Colloidal silver good or bad for humans
So sick.
What is this spray
I want to use this product how I can get
You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Order Counter Kit Here, then follow the steps.
Dentre todos os seus trabalhos, este é o mais maravilhoso que eu acho. Parabéns. Quero reproduzir na minha mesa de jantar, aqui no Brasil.
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
جميل ماشاءالله 👍🏻👍🏻
Thanks for watching the video
online.flippingbook.com/view/364043
Dope!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Love
Why is dude putting random tape on the drop cloth? I know it’s not a big deal but I’m sooo curious