Sounded like what? I think you might be hearing some artifacts from either my phone's camera mic or some crackling from my sweep generator. At the test voltage of 1 watt, the SPL is about 110+dB, so the mic is getting a bit stressed and the compressor/limiter is kicking in.
I also apply it to the suspension. Less than a gram of added mass. I blew compressed air to redistribute some of the Aquaplas, so it gave the wavy, textured impression.
You'r changing it's caracteristics. You want to avoid those harsh midds, go for metalic horn, damped with bitum. It will calm those harsh midds & have better highs at 12khz
@@obiessen JBL, nor any other manufacturer of compression drivers publish Thiele-Small parameters. I'm curious from where your data come. BTW...Meyer Sound dampened the metal surrounds of JBL diaphragms with a coating to dampen resonances...distortion.
Good job 👍
where is "Aquaplas" available?
was the first sweet in the mid band sounded like it
Sounded like what? I think you might be hearing some artifacts from either my phone's camera mic or some crackling from my sweep generator. At the test voltage of 1 watt, the SPL is about 110+dB, so the mic is getting a bit stressed and the compressor/limiter is kicking in.
How did you apply the aquaplas?
Very carefully. Measured for before and after moving mass. Apply...allow to dry...weigh for added mass. It's a pretty delicate proprietary process.
Did you use a primer? Did you use a brush? How has it lasted?
It looks like it is applied much thicker than the SL diaphragms
I also apply it to the suspension. Less than a gram of added mass. I blew compressed air to redistribute some of the Aquaplas, so it gave the wavy, textured impression.
You'r changing it's caracteristics. You want to avoid those harsh midds, go for metalic horn, damped with bitum. It will calm those harsh midds & have better highs at 12khz
You're correct. The characteristics of the harsh secondary harmonics are greatly reduced by the damping of the Aquaplas.
nevercoat the surround Fs will go up pulse will go down! qms will change and so on.
Please tell me the Fs of the JBL 2445H/J.
data are on internet around 460 HZ@@edgewound why you need to know?
@@obiessen JBL, nor any other manufacturer of compression drivers publish Thiele-Small parameters. I'm curious from where your data come. BTW...Meyer Sound dampened the metal surrounds of JBL diaphragms with a coating to dampen resonances...distortion.
@@edgewound messurements, he will have the same problems .all parameters change,
@@edgewound check imp curve you wil see
I think you have made inadequate a diphragm .........................
You are free to think what you will. The response is improved. Secondary resonances damped.