NEW BAFANG DISPLAY DZ41 UART
Вставка
- Опубліковано 7 лют 2025
- Bafang E-bike HDMI Colour OLED Display Colour Display For BBS01/BB02/BBSHD/M400/M500/M600/M620 Bafang Motor CAN / UART Protocol
www.aliexpress...
Product introduction
Intelligent liquid crystal Display
Simple and light, left switch display
High brightness 1.8-inch multi-color nixie tube screen
Excellent outdoor design, IP65 waterproof capacity
Serial communication interface to facilitate maintenance service
Suitable for electric power assist bicycle in accordance with the standard of EN15194
enerprof.de/me...
and here is a link to Neeko DeVinchi • DZ41 Display - (The CA...
hope you enjoyed the video and it helped you out a bit now get out & ride :) Please click on the like (if you like the video) and please consider subscribing & and click on the bell button to be notified of my next video thanks watching
Nice. I got mine in less then 2 weeks working fine with bafang M500👍
I have this display also, its great for its brightness and simple use and layout, only thing I didn't like was its limited to 5 pas settings and won't display battery voltage or percentage, that said its not a deal breaker for its price and it does have a hinged clamp which is a good addition for fitting on handle bar.
Can you change the speed limt with it
I have 500C.... really nice and stealthy; shows battery voltage and engine power being applied continuously too in an analogue meter.
yes m8 the 500c is one of my favourites
Trouble with 500c thats well known is the battery doesn't display full percentage but does voltage level.
Dose it work on mid drive motors?
Great video Fat Bike Rider. Keep it up 👍🏿
Hello. Thank you for this video very interesting about the available settings.
I have an e-bike from a french brand (Go Sport) with Bafang 36v250w motor and Dorado 36V battery (with Samsung cells). The LCD goes out of service on last saturday.
I bought this model of LCD screen to replace it but I am worried about an uncompatibility...
The cable/plug is the same green 5 pins (UART I think). Is there a risk of uncompatibility ?
And how is it on light sun? Are digits visible? My friend tells me that his 850C not visible at light sunny day. And he have ordered monochrome C965 LCD dispay. And now I have seen also one more new L200 monochrome display with bluetooth on Ali.
hi m8 yes its very good i have a new vid coming soon on it
Its very bright, its good if all u want is speed,trip avg speed and max, i prefer my dcp18 thou,
Is there a way to adjust the power from the motor per the 5 assist settings on the controller? I can not find this in any manual.
It just hooked right up and worked? Man I wanna see if they have one for bbshd.
yes it will work with bbshd
I bought 2 of the 860c for my wifes bike and mine. Mine refused to come on one day so i swapped them over on our bikes, my original wouldn't work on my wifes bike either. I saw the writing on the wall and ordered two of these dz41's ans wouldn't you know it the second 860c stopped working on my bike 3 weeks later. I installed this today on my bike and it does work but for how long? The thing i dont like about this one is that it doesn't remember my ride settings and i have to adjust it everytime i turn it on.
@NigelM18 I cracked the lcd display on one of my 860c's - would you be interested in selling me your's for spare parts ?
Do you have a new link to the manual, the link doesnt wordk anymore
I have the Bafang DP-C18 display connected to a M420. The controls and display are separate units. Can I replace these with this single unit?
not sure buddy
Yes, for the m420 ur need a can type connector if u order the dz41, one thing thou, this dz41 lacks some features the dpc18 has like showing voltage/percentage of battery, the total watts draw and amp draw, i went back my dpc18.
@@what-about-mike83 Thanks! As long as it shows the battery capacity, I'm fine with it. We have 2 bikes with DP-C18's and they both are filled with moist after 3 years, causing malfunctions. I need something waterproof! The DPZ41 looks just right. Is it easy to install?
Hey, I'm looking to buy this display, can it run on 52V battery tho?
Yes m8
bro I have the same display on my ebike but I am unable to increase or decrease the speed, it is displaying the speed set parameter but +/- doesn't change the speed. plz make a video on how to change speed
sorry buddy i dont have the disply any more
@yashankgupta8886 did u find a solution for this?
Provato sul mio bafang. Una porcheria immane
Volevo prendere un display x bafang m500 ...un display che dà riuscisse a modificare la velocità coi tasti....ho trovato e mi hanno consigliato un 600c... questo in questione nn va bene?
Grazie
Can I set my own password? Can I check the battery voltage in the menu?
sorry buddy i dont have that model any longer
How to turn on bluetooth?
No Bluetooth on this model.
@@what-about-mike83Why does it light up when You Turn it on then
@@ioanniss2438 Sorry, what lights up are you referring to? dz41 doesn't have bt, I own that display!