DIY: Stereo Audio Amplifier 3.5mm
Вставка
- Опубліковано 1 чер 2019
- Build from scratch, speakers, resistor and capacitors from old analogue TV.
Mosfet Tip31c: bit.ly/tdjgdsa
Step down module: bit.ly/2Wffql4
Power jack: bit.ly/3a5hGTx
-Input 6V, use heat dissipator.
-1k resistor ,16V 100uf capacitor.
-Schematic at 2:15
-Sound is clear in highs and mediums, the bass is not very strong.
-Using step down converter to supply 3 Volts to the blue led.
-Simple to build, easy design, i´m happy with the final result.
-12 volts is the max power supply, 6V to 8V is recommended.
-Heat dissipator from PC motherboard.
-Tested also with 0514 transistor.
Music list:
[Royalty Free Music] Summertime Vibes Del.
[Royalty Free Music] TripKV
[Royalty Free Music] Far Away Declan DP
[No Copyright Music] Hustle - Peyruis
AXEN & HYLO - Habits (feat. AKACIA) [NCS Release]
Raiko - Revenger [NCS Release]
Clarx - Zig Zag [NCS Release]
(Homemade line in phone playback, sound amplifier project circuit using transistor/ mosfet, the simplest and easyest way, 7w 8ohm tv speakers, use full range speakers for better sound, how to make a stereo amplifier at home, tip31 / tip41
Start to finish full video )
#DTekDIY - Розваги
No voice. No bullshit . Just amazing sounds of equipments. Good job man.
Life hack: use a single 1k resistor in series with the LED instead of the seperate regulator.
Dont know why but I find it so comical watching it sped up. Awesome work dude. 😁
Wicked, amazed at what I watch in the early hours and think hell yeh, so many projects ongoing for me it seems this could yet be another, thanks for sharing.
tanks
Where you buy the kit?
Sensational, dude. I watched a bunch of videos, and most of them were either unreliable or too complex for me. The sequence of your project is so logical and clear that it greatly increased some fundamentals that I didn't have yet. Thank you so much for your generosity.
thank you, glad you liked :)
This amp turned out really good
Good day, well put together video you've got right now.
Good job, grate Project Bro 👍
aapke banane ka tarika humko bahut hi aachha lagta hai......
Дешевле купить китайскую поделку, которая будет звучать лучше и выглядеть лучше. А если уж принципиально хочется сделать что-то руками, то почему не сделать это качественно и хотя-бы чуточку красиво?
Согласен с тобой.
Végfoknak nyugodtan használhattál volna 2xLM386, TDA2822, vagy TDA2616-os végfok IC-t is.
A LED-nél pedig több LED-et sorbakötve és az ellenállás praktikusabb és olcsóbb megoldás lenne.
De amúgy a hangszórók elrendezése nagyon jó lett.
Muito top parabéns mano.
VERY VERY BEST AWESOME JOB NICE VIDEO 😎
work of a good professional, it was very top this box.
which wire is the left side and which is the right side so you know where to solder each wire. you didn't specify
Good job ! Neat project ! I've built a similar device using a car stereo and a pair of jensons with built in tweeters + mids. While I was testing it, a neighbor said he'd buy it from me that was that. Radio no more....
Nice, i have done one with a car stereo also
Vc vende essas caixinhas amplificada? Quanto custa?
Trabalho perfeito
Good Morning! okay? Interesting your project. What source did you use for it: 12vts 5 vts? And that little module you used only for the blue led? thankful
Hello, i used 6 volts power supply, the little module is a "buck converter", its used to drop the voltage, in this case from 6 volts to 3 volts to be able to use the blue led, all the links and more infos in the description, tank you ;)
@@DTeKThanks! thank you. I'll try to make this your project. Can I use a potentiometer to increase and decrease the volume, where should I put it? Thank you.
Because this is a stereo amp i guess you could put it in the 3.5mm negative output, between the transistor and the 3.5 mm jack
@@DTeK why not just supply 1k resistor to the Led's?
Nice job
Why don't you use LM377 or LM1877 or MC34119 or TEA2025 or such like that?
Cheers from Indonesia
i wanted to use parts from my old television, check my other videos i have used many other bluetooth modules
Hello sir. I. Love this video. And i have tried to build up 1. But my speaker only 1 side got sound. Another 1 side no sound. Both speaker (8ohm 8 watt) was OK. I found the speaker no sound 1 side when i connect the DC step down voltage for LED. I use 6V and 9V input also same. 😅 Please advice sir.
Did you follow my schematic? check if both channel right and left are sending signal
@@DTeK hi. I have checked. I am sorry. It was my mini jack termination problem. 😅 By the wat, the speaker is OK if using laptop or handphone. But if i connect to my digital TV decoder, the sound very slow even the volume at decoder is maximum. Do you have any idea to make the sound louder? Thanks for your prompt reply & thanks in advance. 😊 I love all your ideas.
Он когда включил их, в голове чётко "радио маяяяк". Звук характерный для наших кухонных говорилок.)
Знающие люди, чего он недоделал, такие дины вроде должны лучше звучать?
незнающий, но пару дырок на опе улучшило бы низы.))
ну во первых объем маловат, а еще нет дэмпфирующего наполнителя, из за этого гундосит, а объем низов бы добавил, я тож делал колонку на советских овалах телевизионниках, уже не помню особо каких, у меня объем получился раза в 4 больше, эта колонка по низам 75 герц более менее тянет, неплохо для сч динамика)
Заднюю стенку надо убрать
Sir ess me kitne watt ka in put de
Как самураи без термо соплей собирали качественную акустику?.))
Đôi bàn tay bạn thật tuyệt vời. :)*
Posso colocar fonte de 9 volts?
Isme btao to Kya Kya lga he Kon Kon sha rjistens lgayq he
Please make it with pam8610
The speaker is nice but why did you use tv speakers
You could use some old speakers cause those have no bass thanks for reading
i build it using parts from an old TV, with diferent speakers it has bass
Надо запотентовать!
NICE 😎 👍👍👍
Did you stoll the speakers from 2 charge 4 ?
There tv speakers
bhaiya ji aap bahut hi achha bluethooth speakar banate hai.....ek humko bhi dimiye na jo price ho wo de denge..........
Bhai yeh speakers kitne watt ki hei
Does this speaker driver sound good?
no
Yes
its quite ok, you can build it for free, just need an old television
Depois vc coloca só uma bateria pra ser recarregável
Esse tipo de amp tem muita qualidade de áudio mas pouca eficiência, a bateria não duraria nada, pois, de toda energia que ele suga, só metade se transforma em som, a outra metade vira calor...
Por isso as caixas Bluetooth não tem som tão definido no volume máximo, elas usam amplificador digital...
Todo bien hasta k ponen la música!
q material usaste y q módulos usaste
all the links in description
у меня есть динамики от телевизора на 16ohm?подойдут?
Эти динамики можешь даже вместо наушников использовать
Can i use another mosfet?
yes, different mosfets can be used, but only those with the same parameters as the one that i used on the video
@@DTeK I made amplifiers with almost the same configuration and works good
Everything is cool, except for the amplifier... why did u use such a bad amp, there is some dc current running through speakers and the audio quality must be bad. I know that it's the simplest amp to build, but if u have put an effort into doing such a nice case for this why didn't you bother building a better amp?
Most of the parts are from an old tv, i used the tip31c because i had a few to use (could use the transistor from the tv also), i wanted to build the easiest and most inexpensive audio amp possible, even the case its from a not used part from one of my other projects, it was a fun project and the case ended up better than i was planing in the begining, tank you for your coment.
@@DTeK ah, ok, cool, it makes sense now xd
Oii bro which is the serial no of transistor
all the links in description ;)
waise me hum aapke old subscriber hai.......
Столько соплёй я давно не видел, в наше время китайцы лучше делают.
Зачем мучаться, если играет как радио?
Kou ñjju,
Стоит такой огород городить ради мощности 2х3 Вт? Я в таком объеме сделал 2х20 вт со встроенной зарядкой, блоком тембра и 2х полосной акустикой.
Modifed Volume Treble Bass Balance and X Bass
Power LED from dc/dc ?)) okay))
Step down converter
Nice 🤙🇧🇷 😍
tanks
Niiicee
No había entendido: "¿Para que era el 2do. circuito?" que colocaste ...... y resulta que es un mini regulador de voltaje.
Amigo................ Para muchos de aquí, le resulta genial tu diseño (y no opino que sea malo) pero, en mi opinión ¡Esto le falto!
Pudiste haberle puesto un Socket Auxiliar Jack 3.5mm Hembra y no el cable mismo. Hacer la entrada para el conector macho en ambas direcciones es fácil de hacer. Esperaba algun tipo de potenciometro (y no el sencillo) pero, me con formo con la luz led de carga.
try to reply with google translator, one circuit is for left chanel and the other for the right channel, 2 circuits for stereo sound
Done the hard way.
все хаят за качество... А вы не обратили внимания что УНЧ на одном транзисторе и громкость достаточная, ктонибуть прочёл текст автора задача была не создать супер пупер колонку а продемонстрировать что такое простое решение работает!
Author, very good demonstration of a simple solution. Thank you for your work. I also do the self-made.
Sao không gắn Bluetooth?
Very Good Broo !! Like !!
Tank you :)
Good, but bluetooth is better
it's not better, it's actually worse in everything besides being wireless
Dùng Pam8403 tốt hơn
Now you can throw it out the window into the skip
I buy 1 for Mercado Libre
Crack 🙏
Вапши маладес быля!
🎉🎉🎉❤❤❤
Проще такую штуку в картонной коробке делать - меньше пилить да и звук получше будет.... про усилок я вообще молчу... нет как класс - существовать может конечно.. но не должно!
Caixa de son eselente
Where is the bass
These are TV speakers, they were not made for music. The speakers are doing the job. There would be some bass response inside of that small box
true, it will have more bass with different speakers, this was made with old tv parts.
колонки даже не трясутся
Excelent... maybe you can put a chameleon led...
Part name
không hiểu nguyên lý hoạt động của công suất kiểu gì luôn 😲😲😲
🌺🌸👍🏼👍🏼👍🏼👍🏼
K dùng. Bluetooth. Hen
Music 7:38 please!
Btw very nice speaker, look like a soundbar :P
Bass. exe has stopped working
Г...но полное и никакой автономности. Хоть акб какие-нибудь вставил.
Мне было бы стыдно её использовать как портативную колонку так как качество звука, даже радио лучше
Hola
Not bad,just use better speakers
better bass with different speakers, this ones are from a TV
WTF..!!!!!!!😱
ये कहा बनाके मीलेगा फोन नबर
Only mids and highs
The speakers are also from the TV, they have little bass
Nice
This video is useful
Keep it up
🇸🇦🇷🇦 🇸🇲🇮🇹🇭
"How to channel creator"
(Learn making of different things)
-Links, music names and more infos in the description :)
-Most of the parts are from an old tv, i used the tip31c because i had a few to use (could use the transistor from the tv also), i wanted to build the easiest and most inexpensive (free) audio amp possible, even the case its from a not used part from one of my other projects, it was a fun project to do :)
Referencia do transistor
💄👡👚👙
Go to up to your favorite
Super
Bass?
to have bigger bass you need better speakers, this ones are from an old tv
Pouu
Ok ......????
А нормальный усилок впаять нельзя было
Он дурак, и из-за этого сиё чудо играет хуже радио
JBL CHARGE 5 🤣🤣🤣🤣
No it's the Yoco charge -5. 🤣🤣🤣🤣🤣
not lending amplifier with transistor will just warm up the speaker
is this sound crap?
For something that you can build for free the sound is very acceptable.
Колхоз какой то.
я такой хни ще не бачив ..мосфет в режиме усилителя да еще со смещением ....и ключи в окне на самом видном месте ..в окн..витрина мля
there are no bass
speakers from tv
Это самый ужасный диайвай
You have lot of expensive machine
I have a cheap drill and a hand saw, those are my main tools.
😒😒😒 what is that
Ладно блютуз ладно без проводная но это говно !
No,no... The sound is very bad.
Crackbox
Bad sound
VERY BAD!!!