Hey J perm and everyone reason this comment I just wanna say thank you for making such gud vids cuz earlier in 2019 I was a fighting cancer and I struggled a lot but your videos about cubing really kept me going when I was hospital so just thank you for being there for me....😇
Hey Dylan, just writing a sweet message for you, I really like your videos, they're chill and veru usefull, you taught me cubing and english, I now average sub 12 on 3x3 which ranks me in the top 100 in France :D Btw I'm broke so I can't support you on patron or buy your merch, so I just watch your videos with adblock disabled, wish you an amazing year
U should really do megaminx and make a progression series imo. You will like it a lot as it has a lot of efficient ways to solve cases and block building. It is a mix of what you like in cubes
Hi j perm i have been watching you for a couple months now and you have put an impact of cubing on me and i have just learnt to solve a 3x3 just because of you and you're videos
Sand the outside of stickerless with 800g sand paper, it’ll give it a very smooth matte finish that is a lot grippier if your hands are slightly damp from sweat
You can achieve a feel in between medium and strong magnets by putting 2 opposite ones on strong and two on medium make sure that magnet strength on one edge is different
I stareted watching your videos and started learning how to solve a Rubik's cube Then a video came in my notifications box It was this video but it was recommended Then I said to my self... Why the hell I have not subscribed to this amazing channel??? So i quickly came and subscribed Love your vids bro...
Use sugar to get rid of logos. Just take some sugar, pop the logo piece out of the cube, and rub the logo with some sugar on your fingertips. Do that for about 5 minutes or until the logo is gone, and then put it back in the cube.
Would you recommend the yufu v2m 7x7 over the spark if I'm on a budget or is the spark just that much better that I need to spend $60 for the event to be fun?
yufu will probably be fine until sub 4 ish if you can't afford the spark, but I've found that, especially for big cubes, buying the best made me actually enjoy practicing, so, that's my opinion i guess
For 4x4, I prefer gan 460 because mine came already setup from the houston 2020 comp and it feels REALLY good, came with a good inner core too so I like it. Kljust my opinion
Do you still use the moyu pyraminx? If not which one do you have as a main(if you compete in the pyraminx) And what do you think about the YJ HuangLong pyraminx???????????? Please read the comment 🙏🏻🙏🏻😁
Thanks for the great videos. I've learnt a lot from them. I'm pretty new to cubing. Currently learning 2 look OLL/PLL and almost there. I'm looking to get my first magnetic cube. Can you recommend one that is pretty cheap? Thanks.
The kylin v2 M is $10, and the MF3RS3 M is $15. Both are pretty good, and if you're wondering about other options, check out my 2019 best cubes review!
@J Perm, just wanted to tell you that I appreciate that you make helpful videos... A month ago I was still using the beginner method and then I saw one of your videos which encouraged me to start learning CFOP. I kept watching your videos ever since and I improved my average time from 1m to 30sec. Oh and I have one question though, I think that my F2l is pretty efficient at this point(using almost all of your advanced tips, mostly intuitive) so should I start doing lookahead? thanks
@@officialveerbajaj You prolly are much better and own a GAN cube now, but I would say go for the 356 M or M Lite. Pretty much a GAN X and on par with the XS for half the price.
@@officialveerbajaj I think if you haven't learned F2L, you should. Try to learn 2 look OLL and PLL. And last but not least, just try to turn really really fast without messing up. You will mess up in the beginning, but it will get better with practice.
![My Rubik's Cube Collection! [200+ Cubes]](http://i.ytimg.com/vi/MyDnyfS7c1g/mqdefault.jpg)
![My Rubik's Cube Collection! [200+ Cubes]](/img/tr.png)
When he has more mains then my entire collection...
Me to
Yeah like what
Same here 😑😐😪
Fax
He doesn't even show all of the WCA cubes in this video. This comment seems like an "I'm being super relatable right now please like".
4x4: “ pretty simple”
5x5: this is what everyone uses
6x6: this is what everyone uses
7x7: this is what everyone uses
0:05 that made my life 10 times better
Haq nago
I don’t care what u were doing this is an automatic click of the notification
JPerm: I think its crazy that a 7 by 7 can be turned THIS fast!
Also JPerm: My only problem with it is that its a little slow.
Lol
@@wakkle thanks bro
Ikr
haha
Haha 😂
J Perm:
Says the spark is one of the most stable 7x7s ever
Also J Perm:
Continues to lock up repeatedly on the spark
Bamboo Cuber he said it was slow from not using it
That says something about 7x7
Maybe its too stable
Bronze Cuber /aka Witherfoot congrats you made me laught somehow.
It's not extremely stable but it's more stable than all the other 7x7s!
1:39, Did this guy really just say "in my opinion, objectively the worst..."
It makes sense, he's a UA-cam god
*1:37
Alister it doesn’t make sense lol, something objective is something factual, for example, earth is a planet, opinions are subjective
@@bespinguard9946 Im sure you missed the meaning of the phrase
I really like your cubing videos and they really help me solve new cubes. I just wanted to say Thankyou
Same here
Fun fact my friend is personally best friends with jperm
Leviathan230 • he’s lucky
Leviathan230 • wow
@@leviathan2303 omg
Hey J perm and everyone reason this comment I just wanna say thank you for making such gud vids cuz earlier in 2019 I was a fighting cancer and I struggled a lot but your videos about cubing really kept me going when I was hospital so just thank you for being there for me....😇
Wow good luck and I hope ur doing good
Are you fine?
At last there is a gan cube which j perm likes.
hes always liked gan cubes, its just there’s always been better options that fit his style
The GAN Air, SM, and XS have all been my mains at some point :)
J Perm my point exactly.
Ok
J perm big fan. From India
J perm:I hope at the end of 2019 this will be a laughable list of mains.
almost got it
Hey Dylan, just writing a sweet message for you, I really like your videos, they're chill and veru usefull, you taught me cubing and english, I now average sub 12 on 3x3 which ranks me in the top 100 in France :D
Btw I'm broke so I can't support you on patron or buy your merch, so I just watch your videos with adblock disabled, wish you an amazing year
@TheTrooper literally stfu "U" is right next to "Y"
"It's 2020" - Dylan Wang just before the world went into chaos
Yup
This is the amount of videos jperm will upload in 2020
⬇️
Five. Nice.
5? That's sad
15 that's not a lot
Still sad amount of videos bro I recommend you to delete this 😂
No
“Aoshi GTS if it were good”. Straight 🔥🔥😂
I feel like when you said I don't know my time because it's still going down, you had some pixilated sunglasses 😎
TIL: You can’t compete in blind with a cube with a logo
It has been like that for over a year
But you can for 3x3
Why not?
Skate with Zain that makes sense
Not Bored Did you know it’s illegal wear slippers after 10p in New York? Oh why not? It’s been a law for over a year.
U should really do megaminx and make a progression series imo. You will like it a lot as it has a lot of efficient ways to solve cases and block building. It is a mix of what you like in cubes
You have really good speed cubes
I love the click clack of the QiYi WuWei
JPerm: I never got around to making a review on this, so this will be my review.
Also JPerm: PULLS OUT DIFFERENT 4X4s
Great video thanks!
The link in the description for "4x4 MoYu AoSu WR M" is actually the non magnetic version.
I wish my 2020 will be as smooth as those moves
No
Haha no
L nope
oof
Rip
Gan -Releases expensive good cubes
Yj-Releases cheap good cubes
Jperm: this cube is sooo controllable. Also Jperm: I cannot believe how fast this cube is. 3:00
Just because it's fast, doesn'tmean it can't be stable smh
Man I love your 2x2 main
OH MY GOD THE WUWEI YES PLEASE FINALLY
You did it, you made last years mains a “laughable list of mains”
its my dads birth day when this vid was made
I’m trying to make a centerless 2x2 design
Mr.Machees hmm
A Void cube
Except a 2x2
Hi j perm i have been watching you for a couple months now and you have put an impact of cubing on me and i have just learnt to solve a 3x3 just because of you and you're videos
Sand the outside of stickerless with 800g sand paper, it’ll give it a very smooth matte finish that is a lot grippier if your hands are slightly damp from sweat
You should do solving a 6x6 like a 3x3
I love you J Perm! Always great content! ❤️❤️
can we please appreciate Dylan's 0 adds
After magnetization and setup the tunics brand cube is my main over other every flagship.
Lol
You should make a new speed cube tier list
2:20 me when I don't wan't to mess up a big cube just because it takes too much time to solve
I agree, whenever I practice a new algorithm, I use my 3x3 cuz it takes a few seconds to solve, unlike how good I am taking over 2 minutes with 4x4
For the Gan 356 xs, which one is better or preferable-stickered or stickerless?
Also, big fan J Perm, keep up the good work :)
Finally!!!! Thanks Jperm! Keep up the awesome content!
Love your Videos, but can you also Review bigger cubes (8x8 - 15x15)? I realy would like to see that :)
I got the GAN 356 X S for Christmas and I love it
I like how you said most of the year when it’s been 4 days into 2020
You can achieve a feel in between medium and strong magnets by putting 2 opposite ones on strong and two on medium make sure that magnet strength on one edge is different
I wanna see an all round cuber tell their mains for all the wca events
I'll make one soon
Pls make mains vids more often
Whenever I'm too lazy to choose what cubes to use, I just copy JPerm's. 😂
Cubing Gem that is basically what my friends and I also do
Thats not good. U know how satisfying it is to do research and collect information and then get the cube knowing u did the right choice
Mars The Pro yeah
@@marsthepro3546 Yes, I totally agree, because that's what I do!
Yea same.
HAPPY NEW YEAR J PERM I HOPE YOU GET BETTER THAN YOU ARE NOW YOU ARE AWESOME
Whenever you review a new 3x3, you should say what spot it sits at in your tier list.
Thanks for all your effort for us man
Thanks for another great year of great videos dude!
Jperm: events I don’t really practice ... blindfolded
Jperm now: all I practice is blind
LOL
0:09 i bought the yj mgc. Its a really good and smooth cube. But if your fingers are dry, make your fingers a little bit wet for much beter grip
Pro tip! Sugar is much faster and easier to remove a logo with than an eraser.
who's back there at the end of 2020? time flies
My Mains:
2x2: MGC 2x2
3x3 GAN 356 X
4x4: GAN 460
5x5: MF5S
Megaminx: Gan Megaminx
Pyraminx: some qiyi one
Melting Cuber thanks
J perm: The X man Spark M is super fast
Also Jperm: The problem is it is a bit slow.
Thank u JPERM for giving us a video a I will surely meet u in the next video
Valk 3 elite man
Looking forward to the Wuwei review!
1:28
all girls ever:
I do t get it
?????
if you dont understand, you are probably too young
😉😏
@@carsonjohnson1845 u don't wanna know
I stareted watching your videos and started learning how to solve a Rubik's cube
Then a video came in my notifications box
It was this video but it was recommended
Then I said to my self...
Why the hell I have not subscribed to this amazing channel???
So i quickly came and subscribed
Love your vids bro...
Sponsored cubers have an advantage in competitions, periodt
how
How???
Happy new yearrrr
I hope I could have it all the cube like that.thank you J ferm
Hey jperm what 3x3 should i buy for about 30$
Wuwei is really nice. Wish it was 56 mm.. it has the smoothest turning I've felt.
Use sugar to get rid of logos. Just take some sugar, pop the logo piece out of the cube, and rub the logo with some sugar on your fingertips. Do that for about 5 minutes or until the logo is gone, and then put it back in the cube.
Make a tier list againnn
Would you recommend the yufu v2m 7x7 over the spark if I'm on a budget or is the spark just that much better that I need to spend $60 for the event to be fun?
I have the yufu and I think it's the best budget cube. The only problem I have is that it's corner cutting isn't that good
Arvind Manohar yufu
yufu will probably be fine until sub 4 ish if you can't afford the spark, but I've found that, especially for big cubes, buying the best made me actually enjoy practicing, so, that's my opinion i guess
I just bought the yufu and it is even better than my 4x4 (thunderclap)
Arvind Manohar just get the mgc
Love the intro
thanks for all the helpful videos
We love you jperm
From philippines
My mains for N/N are : gan 249 v2m, gan x but mostly use weilong wr m, auso wr m, aouchang wr m, x-man shadow m, X-man spark m
Hey j perm great video bro 😎
By the way, love your video's
Rubiks cube collection wow.
I hope i can afford gan 356 xs someday.
Every time you make videos like this I always get jealous on your cubes coz I'll never gonna be able to afford one of those
Can you believe that in a few days 2019 will be 2 years from now?
This year has gone pretty fast I guess
My main for 3x3 with feet would *definitely* be _the lego cube_
Team megaminx in force!!!
Good video. I also use the gan mega and i wish become sub 45 this year with it!!!
Make a 7x7 toturial
Can you make a tierlist of the new cubes in the market
Just bought an air sm with code jperm
make a video about your 2021 mains
Perfect 4:20 time dodge!
You posted this when i was in a competition
0:26 j perm gets short on words haha
For 4x4, I prefer gan 460 because mine came already setup from the houston 2020 comp and it feels REALLY good, came with a good inner core too so I like it. Kljust my opinion
Do you still use the moyu pyraminx?
If not which one do you have as a main(if you compete in the pyraminx)
And what do you think about the YJ HuangLong pyraminx????????????
Please read the comment 🙏🏻🙏🏻😁
J perm:Try to minimize regrips
Also J perm: Regrips on multiple pll algs
man...
my main for clock is amazing.
Can you do a review on the Gan RS compared to the Gan 356 R
My 2x2 is 1$ and it works like a charm
sugar can take the logo off just rub for a few minutes and you can use the Gan XS if you do it i did it on my QiYi warrior W
Even without sugar the logo will eventually fade away.
Thanks for the great videos. I've learnt a lot from them. I'm pretty new to cubing. Currently learning 2 look OLL/PLL and almost there. I'm looking to get my first magnetic cube. Can you recommend one that is pretty cheap? Thanks.
The kylin v2 M is $10, and the MF3RS3 M is $15. Both are pretty good, and if you're wondering about other options, check out my 2019 best cubes review!
@@JPerm Thanks so much. I'll check those out and also that video.
@J Perm, just wanted to tell you that I appreciate that you make helpful videos... A month ago I was still using the beginner method and then I saw one of your videos which encouraged me to start learning CFOP. I kept watching your videos ever since and I improved my average time from 1m to 30sec. Oh and I have one question though, I think that my F2l is pretty efficient at this point(using almost all of your advanced tips, mostly intuitive) so should I start doing lookahead?
thanks
After learning F2L, first learn Full PLL, then better cross, then Full OLL, then work on your TPS and efficiency, then at last learn lookahead.
J Perm, you are the best!
Can you upload videos on how fast you do PLLs on a 4x4 or 5x5? Would be an interesting comparison to 3x3 speeds.
Haha! My XS’s logo faded after about 2 weeks of using it so I mean, you can probably use that pretty soon if you practice 3x3 a lot.
i average about sub 40 should i buy a gan if so then which one
@@officialveerbajaj You prolly are much better and own a GAN cube now, but I would say go for the 356 M or M Lite. Pretty much a GAN X and on par with the XS for half the price.
@@futuregmchess1561 Haha, i kind of lost interest in cubing and havent gotten any faster. Any tips on reaching that sub 30 mark?
@@officialveerbajaj I think if you haven't learned F2L, you should. Try to learn 2 look OLL and PLL. And last but not least, just try to turn really really fast without messing up. You will mess up in the beginning, but it will get better with practice.
Oh my God finally a new video even if I was asleep while it came out