Full Wash: Maytag Commercial Washer MVWP575GW WHITES
Вставка
- Опубліковано 25 сер 2024
- Bringing back out the Maytag Commercial washer to run it through its paces. Still one of our favorite modern machines, as well as one of our best selling.
Try my favorite detergents:
Buy Tide Pods: amzn.to/37j9nar
Buy Ariel Powder: amzn.to/3HZSxtP
Buy Tide Powder: amzn.to/3hTNlwZ
Support Me on Patreon: / lorainfurniture
Buy a Tee Shirt: lorainfurnitur...
Get a Appliance Screwdriver: lorainfurnitur...
I have this washer and it’s absolutely awesome. I wouldn’t trade it for anything. It washes great and doesn’t take 2 hours to wash a load and the clothes come out clean. I had a Maytag Commercial Technology before and it was a piece of crap.
I got to agree. My Maytag commercial washer just went out after replacing pretty much everything on it including the rotor clutch and everything
This is the exact same sound my GE makes while washing, it’s like a dying duck. But I do get to select my own water level.
While I do think these washing machines are somewhat close to an old school machine, NOTHING beats an old belt driven Whirlpool Kenmore, or an Original Maytag. NOTHING, those machines are bulletproof. My 1977 Lady Kenmore is still chugging along. After 46 years. Let's see if this washer will last that long. Nope it'll be dead in less than 10 years.
For me it permires 1 hour before new years: edit i thought it said 11 pm not am
I purchased this machine after seeing the video you posted a few years ago and having been through 2 HE crap machines finding that my clothes were not getting clean. (My sister also bought the same machine after I raved about its washing abilities. This machine is a work horse for sure… But, it took a bit for me to realize that it was not rinsing all the soap out very well. I never put the soap up to the line it says I always use less, so that is not the problem. I use All Free and Clear liquid soap and find that the suggested amount it definitely too much or at least that this machine does not rinse it completely out the first time. I don’t add anywhere near as much as it says can be added on the cap, so it should not be a “too much soap issue”. My sister has the same exact issue with her towels in the same machine at her house. I’m very bummed that this is the case because it is a fortune to use so much water rinsing and rinsing and rinsing.
My top loader spun at 1100. Just make sure to get a decent brand.
Were you able to figure out the soap issue? I have seen the issue sometimes on the speed queen top loader I use (usually with towels), even using a small amount of soap. I'm guessing sometimes there is just so much detergent built up in the towels you really need to do quite a few extra rinses. Also, have read somewhere that using some Calgon water softener can help the soap get rinsed out better if you have hard water. I usually use a front loader, so it's always a balancing act with just the right amount of detergent. But the calgon did seem to help with less soap residue. Also curious to know if you use the extra rinse so it does two rinses? If I used this machine I'd probably use presoak (for the enzymes to work) and extra rinse perpetually!
That's what the extra rinse option on the machine is for.
Look at the water inlet pipes, sometime they moves. So it mean it start using cold or hot water according to the pipe that move.
They say according to Protocol:
105 f is the target temperature for enzymes and other surfactants to work properly.
Nice
Thx❤
I always thought the normal cycle used half tub like on the normal eco cycle on whirlpool commercial. Is that different on the maytag?
@PinkPower4 in this case i mean water level (how much the tub us filled). Not temperature. :p
@PinkPower4 I see. I just asked this since he said it only had full tubs and i thought that wasnodd considering the normal cycle uses half tub. :p
Kirk. Would really like to see you test that hot water temperature again. I had spoken to Maytag about the hot water temperature 2-3 yrs ago and they did tell me it only reached I think(can't remember exactly) around 90 degrees. In any event, it was only a lukewarm temp.
So not so sure it was a faulty hot water tank on your part.
When u retest, can u plez check the warm settings to see if they come out any warmer and not cool? Appreciate it and all these wonderful reviews, videos!
Thank u for retesting the water temp!
To the person that said “sticking with your front loader”, If you have special one that’s awesome. But I might suggest that you take it to the laundry mat and put it in a washer with No soap. You may be surprised how much soap is still in the clothes. I was shocked when I did this and that led me to selling my front loaders and switching to this machine.
"Laundromat"
And yes I ageee my family switched to a front loader some years back and I swear my clothes dont smell as clean.
The reason why suds appears in the laundromat machines is not usually because of your home machine not rinsing. It is because of the overuse of soap in the laundromat machine stays inside it and comes back next load.
Chances are this isn't the soap left in your clothes, it's the soap left in the laundromat machine.
I'd bet money that if you ran a laundromat machine completely empty you'd see plenty of leftover suds. People very frequently overdose detergent at a laundromat.
@@Smurdle450 I was at the laundromat on Thursday and there was so much suds in one machine I just ran it over again. The machines were the agipeller CAE2743 machines and they cleaned the rugs just fine. One of the mach8nes had shot bearings though.
@@DylBuilder1 yes, í have noticed that since I have been using laundromat!
I wish they would have just made this washer a direct drive. Other than that it’s great.
Should do normal wash for small loads since it only fills the tub half way
This is still the best machine compared to LG!
Hi, I watched and liked your videos before I bought this washer a few months ago. It's got one big issue for me. Clothes with drawstrings, bra straps, etc sometimes get caught under the agitator fins because there's a gap. My cheap solution: I took some silicone drinking straws and cut them, then slide them under those gaps. It has definitely helped, but the straws come off between every load and it's always a game of "find the straws" when I transfer clothes to the dryer. Do you have any better ideas for a fix or know if Maytag or anyone had a product for a more permanent solution? Thank you.
Put your bras or anything with a strap in a zippered laundry net bag
This washing machine I assume uses planetary gear transmission, the washing algorithm and double action agitator are excellent. Too bad these transmissions aren't as durable as the old school ones.
Modern washers do not have transmissions.
@@UrOpinionsSucc What does the word transmission mean to you?
Yes they do.
Transmissions with plastic gears. The horrible reviews are starting to stack up for this washer. It allegedly only lasts 2 years before needing repair
Why is the agitator just spinning the clothes in one direction? An agitator is supposed to agitate the clothes back and forth for an even and thorough wash like the Kenmore 80-90 series
It's a "dual action" agitator.
Turns out that spinning the upper part in only one way helps the spiral to move the clothes from the top to the bottom of the washer so they get a better wash movement. Don't worry, that system does work and the bottom part of the agitator does always spin in both ways.
Why is maytag discontinuing this set?
Kirk I bought this model a few months ago but mine doesn't fill as much as yours. Is there a fix or hack for this? Thank U
Anthony Sada,I just got mine too,and it doesn't fill but an inch or two below slots in top of washer
I’ve heard that they’re unfortunately discontinuing this model.
where?
@@bluemystic87 Kirk Rivas mentioned it in one of his videos, and I’ve heard it from other people as well.
@@DrummerboysWashersAndMore that sucks. I was thinking of getting this. I have no idea why they would do this. There is no machine on the market like it. I always see people raving about it is the closest thing to an old school washer. This makes no sense.
@agiflow I am wondering if it is the one with the five year warranty included in the purchase price and they will keep the one with the one year warranty they sell at Lowe's. Different model number, same machine, two different warranties. To get rid of it entirely makes no sense.
@@DrummerboysWashersAndMore I have also heard this. Whirlpool's dealer portal also seems to list the model as discontinued.
What’s the difference between mvwp575gw & mvwp576kw?
575GW has a 5yr parts and labor warranty, whereas the 576KW is only a 1yr parts and labor warranty.
Only 30 minutes for a cycle? My Samsung top loader takes a little over an hour to do a normal load
Why that much water??🙄🙄
A normal wash would’ve filled the tub only halfway
To me it is way to noisy of a machine I will stick to my front loader
Since my long comment disappeared.
I there not as loud as you hear on the video .
It's the enhanced microphone that makes it much more intense in the space your residing in .
And a little noise is good .
That way you know where the washer cycle is . If close near there operating positions.
I s better then the drop and lefting that front loaders do with fabrics. And then the buckles.. zippers..buttons to name a few.
Even with and induction model.
That could be worse in my opinion.
Washers should have designated sound clues as older tops in American machines had there own distinctive sounds .
I indulge in that topic intensely.
But way to exhausted to write it out again.
But this not a Maytag nice hum from a classic Maytag helical drive quite . But it's also not a bad sound when doing average chores or relaxing or sleeping.
😏🤨😉😎🌀🇺🇲👋
I’m the first commenter😂
Stop wasting water man . WATER IS LIFE
Nice