Bottom to top is the way to go!!! It allows you to see where the dirt is and insures you dont miss anything. Top to bottom the water going down rinses away some of the dirt and soap. Making it harder to see your progress.
Hello Nerta, A few questions Does the acidity of the chemicals over time damage the body work? (Contemplating using on high end vehicles so need to reassure customers) Next question after application of the chemical, once you rinse off the chemical with high pressure does the dirt that gets dragged along damage the paint work? (Again i would like to reassure customers) Last question just your personal view. would you think it’s just as good as washing the vehicle the common way bucket and mitt vs the touchless method (As I will be charging customers I don’t want them to say you have not washed my car properly etc) Thanks
Yes, yes and 3 - both ways aren't ok for washing a car. But considering that washing a car is bad for the car, there is no other way.. You gotta "attack" the dirt. Paint lasts in good condition, for at lest 5 years. Then you sell the car.
Mifta Ua it’s best to put the snow foam on wash it off on put it on again and use a mit or you could just put snow foam on and use a mit straight away but it’s up to you if you use a mit at all
After watching carefully, it is clear that the very high pressure wash did all the dirt removal......Where did this idea of covering the car with soap but not rubbing the dirt would do anything but make the car look white for a while? I threw my foam cannon away and went back to rinsing the car well, touch wash with lots of suds then rinsing the car well and drying it with microfiber. Very happy with the results.
Not sure if it’s the soap or the extremely high pressure power washer 2” away from the surface! Watching this gives me anxiety. From bottom to top and that close to the paint with the wand?! 🤨🤭
@MDlo Kredt For thick and hardened mud, there is no way to spray the product and to get a clean surface. You have to wash away the layer of mud and possibly wait until the surface is dry. Then you can apply the product, and if it works well then it will clean the car flawless. I am doing professional car cleaning over 15 years. The biggest problem is the export and the stability of the product. Every time i used a brand, some of them for years. At the beginning you get perfect quality of it, after one year the ingredients change ( manufacturer starts to save on expensive chemicals ) and the product gradually gets worse until it is useless. I tried so many brands from Italian manufacturers, all of them do the same thing. I said to myself a long time ago, you fool me once, the second time you are just out. Another brand or product gets the chance. I am using Nerta since 6-7 years. The first 4 years i used Nerta Diamond. In a time span of a year, the product became useless. The smell and consistency changed, at the end it smelled like a sewer, when you open a canister. I started to use Nerta Diamond Blue. I was surprised by the quality it delivered. First 2 25L canisters flawless. The best product i tried until today. The irony, already the second delivering showed lack in quality, today for me it is also useless. All dirt stays on the car, a shame for a such expensive product. I will wait for the response of the supplier to see what Nerta will say. For non EU countries it seems they are also prone to deliver garbage to the market, since the laws and controls are lower. But nobody will get their self fooled, no quality no further buying !
As a detailer myself, I am also concerned about why you would wash from the bottom up and why you would have the nozzle that close to the paint. If it weren’t for me detailing mine and my wife’s vehicles, I would never do business with someone who washes in this manner. It makes no sense at all.
Sorry but, from what i saw from the video, beading and sheeting properties are week :( . Can you upload a video that shows the dirt repellency properties. Also, whats the pH value?
Applying the cleaning agent from bottom to top, ok, but when rinsing, top to bottom is always more effective, gives the cleaning agent more time on the dirtiest area which is 99% of the time the lowest areas
Rinsing bottom to top is the correct way to use a touch less wash. If you start at the top then all of your product is on the floor by the time you reach the bottom. It also helps you see any parts you might have missed. The wand does look a little close at times, but on a modern car like this it's not a problem.
В этом есть смысл, есть повод пройтись кузов водой ещё разок, что более увеличивает эффективность, а так сверху смыл, бока смыл, и верх уже не трогаешь. Вот в этом и прикол!
do you have anything that's really dirty with grease (example: motobike rear tire rim with grease from the chain)..and a very dirty exterior car..i've being following your videos from day 1..thanks and keep it up.. (Greece)
ZACHARIAS KYRIAZIS They have certain products that’s more specific to road grime film and tar, it’s concentrate solution not dilute so you have to apply it on as a spray, seen it done on here it’s quiet good, A company in Australia called chiefs do an own brand which is a dilute solution so it will be like snow foam for grime and tar
@@miftaua4229 thanks for the info.. I would trust their products by far.. problem is, will I find them in Greece... Doubt it... shipping would be expensive.... Motorbikes are difficult to wash, even by using warm water pressure washer.. I do have the karcher k7.. touchless chemicals like nerta would be my candidate..
ZACHARIAS KYRIAZIS You will be surprised nerta will have offices dotted all over the world however not all are called nerta For example nerta in Australia have a company called chiefs which I mentioned above who sell nerta solution. Best thing to do is email or phone the head office for nerta google the number ask for your local supplier or better yet ask who they supply near to Greece or in Greece and u shall have your answer But they are well recognised so I think you will be successful
@@miftaua4229 I've noticed that in Australia is called differently... Anyway I'm hoping soon that I can get my hands on nerta... It's a pain washing my vstrom... I'll send an email requesting shipping costs to Greece..
Bottom to top is more effective for touchless washing. While in "traditional" washing is the mitt to remove the dirt, in this case is just the soap (and the pressure washer) to do the job. Rinsing bottom to top allows the soap to stay longer on the surface and to remove the dirt more effectively. Obviously a final rinse top to bottom is needed anyway.
this gentleman will probably wash a car for the first time ... from top to bottom and not so close to the pressure in the car ... otherwise the foam did its job ...
Tyres first especially if you're using a wheel cleaner. Bottom to top for touch less wash. Soap is for getting the grime soft so pressure washer can remove
I suspect the car would have been just as clean if you skipped the foam cannon. I have never seen a car wash using foam cannon that didn't need a touch wash or an extremely high pressure sprayer to remove the dirt.
genelde rahatlatır bu tarz videolar, bu gıcık etti beni herşeyi tersten yapıyor yarım bırakıyor sonra dönüyor.. ıı ııh beğenmedim suyada yazık 1/3 üyle yıkardım ben. alttan üste yıkamak ney ya.
If you like our content, don't forget to subscribe! 💧
I like It but How can i get that product and whts the name im hre in Brasil i need it
Bom dia aonde encontrar este produto aqui no Brasil??????
Please please, can I know the foaming machine you’ve used?
Nerta Official joatnh
Ande em comtro esse produto
Great 👍😃 Music 🎶🎵 now come wash my car!!
Bottom to top is the way to go!!! It allows you to see where the dirt is and insures you dont miss anything. Top to bottom the water going down rinses away some of the dirt and soap. Making it harder to see your progress.
3:12 Here comes the satisfactory part.
Hello Nerta,
A few questions
Does the acidity of the chemicals over time damage the body work?
(Contemplating using on high end vehicles so need to reassure customers)
Next question after application of the chemical, once you rinse off the chemical with high pressure does the dirt that gets dragged along damage the paint work?
(Again i would like to reassure customers)
Last question just your personal view.
would you think it’s just as good as washing the vehicle the common way bucket and mitt vs the touchless method
(As I will be charging customers I don’t want them to say you have not washed my car properly etc)
Thanks
Yes, yes and 3 - both ways aren't ok for washing a car.
But considering that washing a car is bad for the car, there is no other way..
You gotta "attack" the dirt.
Paint lasts in good condition, for at lest 5 years.
Then you sell the car.
Mifta Ua it’s best to put the snow foam on wash it off on put it on again and use a mit or you could just put snow foam on and use a mit straight away but it’s up to you if you use a mit at all
Geweldig spul de we sky! voor iedereen die het niet gelooft, probeer het zelf een keer en je zult versteld staan! was mijn auto er elke week mee!
Ok
After watching carefully, it is clear that the very high pressure wash did all the dirt removal......Where did this idea of covering the car with soap but not rubbing the dirt would do anything but make the car look white for a while? I threw my foam cannon away and went back to rinsing the car well, touch wash with lots of suds then rinsing the car well and drying it with microfiber. Very happy with the results.
Not sure if it’s the soap or the extremely high pressure power washer 2” away from the surface! Watching this gives me anxiety. From bottom to top and that close to the paint with the wand?! 🤨🤭
Bottom to top is the rigt way, low pressure on the washer, as seen when he washed on the ground
@MDlo Kredt when they would just use the presseure washer alone a fine dirtlayer wont go away, with the soap it does,
@MDlo Kredt For thick and hardened mud, there is no way to spray the product and to get a clean surface. You have to wash away the layer of mud and possibly wait until the surface is dry. Then you can apply the product, and if it works well then it will clean the car flawless. I am doing professional car cleaning over 15 years. The biggest problem is the export and the stability of the product. Every time i used a brand, some of them for years. At the beginning you get perfect quality of it, after one year the ingredients change ( manufacturer starts to save on expensive chemicals ) and the product gradually gets worse until it is useless. I tried so many brands from Italian manufacturers, all of them do the same thing. I said to myself a long time ago, you fool me once, the second time you are just out. Another brand or product gets the chance. I am using Nerta since 6-7 years. The first 4 years i used Nerta Diamond. In a time span of a year, the product became useless. The smell and consistency changed, at the end it smelled like a sewer, when you open a canister. I started to use Nerta Diamond Blue. I was surprised by the quality it delivered. First 2 25L canisters flawless. The best product i tried until today. The irony, already the second delivering showed lack in quality, today for me it is also useless. All dirt stays on the car, a shame for a such expensive product. I will wait for the response of the supplier to see what Nerta will say. For non EU countries it seems they are also prone to deliver garbage to the market, since the laws and controls are lower. But nobody will get their self fooled, no quality no further buying !
Nice pre-wash but where's the wash itself?
What pressure washer and gun are u using bro? It's sick!
Im waiting 4 reply.. damn good Pressure!
Nice foam wash👌👌
Zawsze wydawało mi się że samochód myje się zaczynając od dachu czyli od góry do dołu . Profesjonalny film hehehehe
To źle ci się wydawało. Pianę nakłada się od dołu do góry
Skoro jesteś tak inteligentny😅😅 to powinieneś się domyśleć że nie miałem na myśli piany tylko MYCIE WODĄ
@@arekpawelec2583 mycie wodą? chodzi ci chyba o spłukanie 🤦🏻♂️
@@dAwid-px1vd mycie wodą 😂😂
As a detailer myself, I am also concerned about why you would wash from the bottom up and why you would have the nozzle that close to the paint. If it weren’t for me detailing mine and my wife’s vehicles, I would never do business with someone who washes in this manner. It makes no sense at all.
Rob Bowers joatnh
Sorry but, from what i saw from the video, beading and sheeting properties are week :( . Can you upload a video that shows the dirt repellency properties. Also, whats the pH value?
SubaruOutbackBoxer they have a wax spray
Spray water from top to bottom
Applying the cleaning agent from bottom to top, ok, but when rinsing, top to bottom is always more effective, gives the cleaning agent more time on the dirtiest area which is 99% of the time the lowest areas
Does this come out of soap tank foamy like this
Top down, no?
No. Touch less wash bottom to top
Final rinse, yes.
I’ve always washed from the bottom up !!!
Idiot
You’re way to close with the pressure washer. Always clean top to bottom. Duh
Rinsing bottom to top is the correct way to use a touch less wash. If you start at the top then all of your product is on the floor by the time you reach the bottom. It also helps you see any parts you might have missed. The wand does look a little close at times, but on a modern car like this it's not a problem.
Bottom to top always....whats the point washing off all the detergent washing from the top down.duh.
Peter Dennehy whats the point for keeping the mud on the car duh
@@Leowiseone I am talking about leaving the detergent on the car...and getting it cleaned properly....tiocfaidh ar la....
Me estresa mucho que no lo lave de arriba asia abajo
Wrong wrong from start to finish you rinse from top to bottom
Javier Gonzalez exactly what I was thinking like damn he doing somebody car all wrong smh never wash bottom to top but always top to bottom
Bottom to top method is used for touchless wash
So the product isn’t washed off as quick
Hi for clean all the car how many water you use?
How long that lance?
1.20M
I have tried that pruduct, but you can see marks from the soap, after it's washed of and dry ???
If you rinse well than you shouldn't see any marks.
Do you sell your soap products on amazon?
Looks like it works great! No foam cannon too. Is this Ph neutral of a wax stripper? What pressure washer did you use? Thanks!
nice car
Guys touchless wash bottom to up..
it is super easy to clean.
What tip is he using
What stores can I buy this at?
It's a really nice one and I would wish to ask you of how can I get those products?
Am in Kenya,Africa.
Kindly advice
Do you guys have a supplier or a reseller store in the US were I can get these products to try ?
Alguém pode explicar pq nesses vídeos, eles usam o produto de baixo para cima??
Невозможно смотреть как он моет сначала низ, потом верх😄😄
А что тебе не нравится?
жека белый а что, ты так же моешь?
Дилетант.
В этом есть смысл, есть повод пройтись кузов водой ещё разок, что более увеличивает эффективность, а так сверху смыл, бока смыл, и верх уже не трогаешь. Вот в этом и прикол!
SHSV сверху как правило нет столько грязи как снизу, смывается вместе с шампунем
What tip are you using on the end of the wand during the foaming process?
without foam can how you can produce foam
Boa noite, por q os americanos após jogarem sabão por spray enchaguao debaixo pra cima e não de cima pra baixo?????
do you ship to u s
Hello, please send an email to info@nerta.com
Nerta Official joatnh
How many pressure bar is for jet washer ?? And where to buy in Indonesia ?? Tx bro
Where can i buy?
Mais pourquoi il nettoie de bas en haut ..........
do you have anything that's really dirty with grease (example: motobike rear tire rim with grease from the chain)..and a very dirty exterior car..i've being following your videos from day 1..thanks and keep it up.. (Greece)
ZACHARIAS KYRIAZIS
They have certain products that’s more specific to road grime film and tar, it’s concentrate solution not dilute so you have to apply it on as a spray, seen it done on here it’s quiet good,
A company in Australia called chiefs do an own brand which is a dilute solution so it will be like snow foam for grime and tar
@@miftaua4229 thanks for the info.. I would trust their products by far.. problem is, will I find them in Greece... Doubt it... shipping would be expensive.... Motorbikes are difficult to wash, even by using warm water pressure washer.. I do have the karcher k7.. touchless chemicals like nerta would be my candidate..
ZACHARIAS KYRIAZIS
You will be surprised nerta will have offices dotted all over the world however not all are called nerta
For example nerta in Australia have a company called chiefs which I mentioned above who sell nerta solution.
Best thing to do is email or phone the head office for nerta google the number ask for your local supplier or better yet ask who they supply near to Greece or in Greece and u shall have your answer
But they are well recognised so I think you will be successful
@@miftaua4229 I've noticed that in Australia is called differently... Anyway I'm hoping soon that I can get my hands on nerta... It's a pain washing my vstrom... I'll send an email requesting shipping costs to Greece..
ZACHARIAS KYRIAZIS chiefs is the distributor but they also created there own cleaning products but sell nerta
Hii, I from Indonesia. I'd like to ask you, what is nerta? What's product of nerta? Is it pressure washer machine or shampoo non contact?
Thank you
Hii bro plzz I want
To ask something's with you please
@@tasneemazmi4919 about what bro?
@@tasneemazmi4919 come in plzz
Cok rahatlatici👍🏻 Mukemmel 💪
Araba aşadan yukarı deyil yukardan aşaa yıkanır
Bottom to top? Last time I checked, the soapy dirty water was flowing downwards... My side of the world anyway
Bottom to top is more effective for touchless washing. While in "traditional" washing is the mitt to remove the dirt, in this case is just the soap (and the pressure washer) to do the job. Rinsing bottom to top allows the soap to stay longer on the surface and to remove the dirt more effectively. Obviously a final rinse top to bottom is needed anyway.
I live in China and can’t find nerta anywhere
Not firm foam enough. Need to set that washer up.
You wash from the top down, not from the bottom up.
That snow Foam must have tfr in it
Will be better if half of the product is not wasted on the floor
Why in the hell dont u guys have a distributor here in the US?
They do it in Texas
@@dannyweston4426 info?
this gentleman will probably wash a car for the first time ... from top to bottom and not so close to the pressure in the car ... otherwise the foam did its job ...
Bu aracın sizde fiyatı ne kadar
bro, from next video try doing these things.
1. waste less soap
2. wash top to bottom
3. wash tyres at the end
Tyres first especially if you're using a wheel cleaner. Bottom to top for touch less wash. Soap is for getting the grime soft so pressure washer can remove
1:23 Oops, road didn't get bright, LOL
Immer von oben nach unten abwaschen.......😉👍
Das dachte ich mir auch 😒
Nope von unten nach oben ist richtig, abspülen dann von oben nach unten, sonst schwämmst die seife weg
@@fabianessiggurke8725 dann lies doch mal was ich geschrieben habe.
So much water used to wash off the soap. U should start to and then down to bottom.tut tut.
I suspect the car would have been just as clean if you skipped the foam cannon. I have never seen a car wash using foam cannon that didn't need a touch wash or an extremely high pressure sprayer to remove the dirt.
Fuel tank thought its feeding time
Lindo Skoda..
Классно асфальт помыл
R u russian mam?
Машину или асфальт моет в итоге?
Асфальт тоже надо мыть, а то колеса искапчкаешь когда поедешь.
@@serega_orlov Дороги плохо моют! Мыли бы дороги, не нужно было бы мыть машины!!!
@@Shsv-88 согласен
Sen türkiyede ol, o su tabancasını parayla ćalıştır da bak nasıl 2 dakkada yıkıyosun.
Kanka ben yalan yok Avusturyada yasiyorum. Burda bi araba yikama en az 4€ dan basliyo. 25tl yapiyo. 15€ ya kadarda cikiyo. Buda 90-95tl yapiyo
Nice sir ji
I would rougher to touch the car because of the dirt on the car and bird poo can demge the paint but that is my opinion not everyones
NA BOA, VC COMEÇA SEMPRE JOGANDO ÁGUA DE CIMA PRA BAIXO.,.. SEM NOÇÃO
Tem que começar de sima para baixo
where to buy in u.s.a
Hello, please send an email with all the details to info@nerta.com. Kind regards
Od góry do dołu się myje
外国の人の洗車動画やけどほとんどのやつが下から上に洗ってるけどめちゃめちゃ効率悪い
上から洗えって教わったけどなー
ようわからん
Машину моешь не правильно,надо начинать смывать сверху вниз а не вверх всю грязь кот забивается под пластиком!!!!
Меня одного раздражает этот тип с такой мойкой??
Start from top
Washing a car from bottom to top ? Strange
Not strange. Just plain inefficient.
Plz car hona
genelde rahatlatır bu tarz videolar, bu gıcık etti beni herşeyi tersten yapıyor yarım bırakıyor sonra dönüyor.. ıı ııh beğenmedim suyada yazık 1/3 üyle yıkardım ben. alttan üste yıkamak ney ya.
That's not the way to rinse a car!
????
Арки кто будет мыть
А диски внутри кто?
When i wash my car lile this, cant clean shit.
go from top to bottom bro, you wasting water.
And time
Nerta Official
So what? Allmost a very bad way to wash you car.
Seemon
🙃
oo0
No no no no no, top to bottom and christ you're way to close with the pressure washer
Плохо
Wash car from tho roof 👇 to the down
1
From bottom to top, exit the video. Amateur
🤭👎👎👎
Z