He took old gears and repurposed them into a gearbox you can’t buy. It was not a disassembled transmission. The housing is completely 100% hand made. As is every part of the gear selector, hand made. He said it take you weeks but he’s wrong. You wouldn’t be able to recreate that in a couple weeks. It would take you many tries. Many months. And you’d probably still not be able to make it work reliably.
Hahahaha if it is disassembled, it would be hard to look for the parts that has been disassembled for it is completely in a random container of gearboxes parts.
@@adarshdeepsingh961 I wouldnt put my name on such a pos were did you lear to weld bearings at do they have a class for that wow i guess u dont owen a mill or anything to do something right do you haha !!!!
@@White_Night_Demon recycling is better, and who moron would spend like 2 days making handmade gears for a transmission, by recycling it helps repurpose old gears and saves the environment
Take a second to realize that this is one of the only people on UA-cam ambitious enough to be making this sort of thing. It would be so difficult to talk about or to explain. I'm thankful that he even bothers to document this stuff. Keep making transmission videos. Maybe you can show us how to repurpose the clutch from your motorcycle for a go kart
The title should say: "How to make a 4 speed transmission, out of a 4 speed transmission." ❕So, just so you know, you can just pull the connecting rod out of a motorcycle engine, block-off plate on the cylinder area, and just connect any motor to the existing crankshaft, and you have a wet clutch, a 4 or 5 speed, with perfect tolerances, a case with perfect oiling, and, as a bonus, a built-in alternator/generator. Oh, and, it's as off road proof as the motorcycle you got the transmission from. It's cheap. It's easy. And, works perfect. From the same place you acquired those gears, shafts, and bearings from. The law of the inventor / engineer, is as follows: Never invent, create, or build, anything that is already accessible, easily available, common, or cheap. Example: Why build a weed trimmer, when you can just buy one. There is one unique change on your design. You changed the original sequential, cam and fork system, to a conventional, H pattern. Nice job. Sorry I came off like a negative nancy troll, but this is what the comment section is for, I guess. 🤪👍
You're right about that. I wonder if there's an easy way to adapt a motorcycle trans to have an H pattern, I just crave the old school shifting pattern over a sequential.
Don't be that dense XD Take it as a learning basic project, I never knew how a H pattern works til now, he's not even claiming it's a tutorial or something anyways.
Wow ❤ .... It is Really helpful for every cycle rider. I have gear bicycle with derailleur shifting which takes too much maintenance and caretaking.... I have already spend too much money for replace too much expensive parts. If i use this gearbox for bicycle, it will be cheap , tuff and problemless.... Good idea... I love it. With attaching this gearbox to my bicycle, i can pump water from well for my farming.... I can generate electricity, I can do a lot of jobs with this gearbox . Great 👍 . Actually i want bicycle with gearbox but such type bicycles are specially made in germany, not in my India. This is the bad thing for me.
Why is everybody missing the point here? I've learned a lot from this, now I know how a manual transmission works in a very easy way without needing further explanations. OFC hes not gonna build a transmission from scratch, that would be a very pain in the butt.
Wish I had a God gifted box full of spare gears and bearings, maybe some keyed shafts, or maybe a a few hundred dollar bills an just buy whatever hell already made.
I was real impressed till i realized 4th gear is only 1to1 not an over drive so no speed gain over not using a trans at all. But you should be able to pull a pickup with your go cart now but impressive work
You could always change the gearing ratio between the gearbox and the axle to get a better top end. At least its something that works well and if you can build your kart properly or around it instead of trying to install this onto one, you can get really creative with speedy karts or even torquie karts, just like you said. Im still impressed none the less.
Cool idea but the problem is, that it is to permanent. Imagine you have to change a bearing or a gear. You're fucked. You have to disasamble everything with your anglegrinder
Very nice and simple, probably best if it had more nuts and bolts for maitenance purposes, but this is not a bad start! Where would you find the spline shafts and gears though, junkyards? Lovely prototype regardless
@@ksthacks Keep up the good work though, I would love to use your three speed and reverse concept transmission for a rat rod go kart I’m going to make long term.
Made easy with the use of a welding machine and electricity ⚡️. I’m sure we can not build this in the bush with out those tools. Looks like a lot of welding. The question now is, is it cheaper to build it or by it?
I'm putting this out there that this is better than rather B welding's transmission for a couple reasons #1 it's more simple and #2 it's built with stronger components.
Yeah be perfect until the slag gets in or one of those weak ass welds break Not to mention he probably toasted one or both of those bearings by welding it very smart but a decent example of how a transmission works
DIY Gearbox.... (Grabs a disassembled gearbox and reassamble it)
It seems very easy but I challange you it will take a week for you to do the same!!!!!!
He took old gears and repurposed them into a gearbox you can’t buy. It was not a disassembled transmission. The housing is completely 100% hand made. As is every part of the gear selector, hand made. He said it take you weeks but he’s wrong. You wouldn’t be able to recreate that in a couple weeks. It would take you many tries. Many months. And you’d probably still not be able to make it work reliably.
Hahahaha if it is disassembled, it would be hard to look for the parts that has been disassembled for it is completely in a random container of gearboxes parts.
@@adarshdeepsingh961 I wouldnt put my name on such a pos were did you lear to weld bearings at do they have a class for that wow i guess u dont owen a mill or anything to do something right do you haha !!!!
thats what i thought too when I saw a box of random gears, rods and other bits that just happen to be conveniently there.
"let me look at my spearparts bin"
*Finds a whole gearbox*
"This would work perfectly "
yes
@@ksthacks I was expecting you to hand make the gears and everything, not just take and recycle already made parts....
@@White_Night_Demon recycling is better, and who moron would spend like 2 days making handmade gears for a transmission, by recycling it helps repurpose old gears and saves the environment
@@shieldonnmercado1953 To make gears in two days first you have to build a milling machine. It would take you another 26 years
Take a second to realize that this is one of the only people on UA-cam ambitious enough to be making this sort of thing. It would be so difficult to talk about or to explain. I'm thankful that he even bothers to document this stuff. Keep making transmission videos. Maybe you can show us how to repurpose the clutch from your motorcycle for a go kart
Didn't know I needed to know how to put together a gear box but glad I learned how.
The real gem here is that box of scrap gears.!! 😊
I wished I had a box like that of gears and bearings etc to dig out of
The title should say: "How to make a 4 speed transmission, out of a 4 speed transmission."
❕So, just so you know, you can just pull the connecting rod out of a motorcycle engine, block-off plate on the cylinder area, and just connect any motor to the existing crankshaft, and you have a wet clutch, a 4 or 5 speed, with perfect tolerances, a case with perfect oiling, and, as a bonus, a built-in alternator/generator. Oh, and, it's as off road proof as the motorcycle you got the transmission from. It's cheap. It's easy. And, works perfect. From the same place you acquired those gears, shafts, and bearings from. The law of the inventor / engineer, is as follows: Never invent, create, or build, anything that is already accessible, easily available, common, or cheap. Example: Why build a weed trimmer, when you can just buy one. There is one unique change on your design. You changed the original sequential, cam and fork system, to a conventional, H pattern. Nice job. Sorry I came off like a negative nancy troll, but this is what the comment section is for, I guess. 🤪👍
thanks you
You're right about that. I wonder if there's an easy way to adapt a motorcycle trans to have an H pattern, I just crave the old school shifting pattern over a sequential.
Don't be that dense XD
Take it as a learning basic project, I never knew how a H pattern works til now, he's not even claiming it's a tutorial or something anyways.
Никогда не понимал, как разобраться во всех этих шестеренках. Часы идут, да и хер с ними 🤔. Автору - респектуха и зачОт за работу. Уважаю 👍👋
Wow if only I had a bucket of disassembled transmission parts at my disposal..
Wow ❤ .... It is Really helpful for every cycle rider.
I have gear bicycle with derailleur shifting which takes too much maintenance and caretaking.... I have already spend too much money for replace too much expensive parts.
If i use this gearbox for bicycle, it will be cheap , tuff and problemless....
Good idea... I love it.
With attaching this gearbox to my bicycle, i can pump water from well for my farming....
I can generate electricity,
I can do a lot of jobs with this gearbox . Great 👍 .
Actually i want bicycle with gearbox but such type bicycles are specially made in germany, not in my India.
This is the bad thing for me.
Sooo, you took a couple shafts from a bike transmission put them in a different case and called it yours? Cool story bro, needs more dragons....
Excellent ! - Very helpful video - 10/10 !
Glad it was helpful!
@@ksthacks Very helpful - Thanks and well done - Super job !
I like how simple it makes understanding how a manual transmission works.
Why is everybody missing the point here? I've learned a lot from this, now I know how a manual transmission works in a very easy way without needing further explanations.
OFC hes not gonna build a transmission from scratch, that would be a very pain in the butt.
Also it allows you to use the internals of a motorcycle gearbox without having to have the entire engine there you can use a different engine
Ya this was great . Got that cyberpunk feel. Or madmax. I'd love to have it on a motor bike
Wish I had a God gifted box full of spare gears and bearings, maybe some keyed shafts, or maybe a a few hundred dollar bills an just buy whatever hell already made.
Gearbox specialist. We are waiting for more. 👌🐬
More to come!
@@ksthacks 👍🐬
This vid is exactly what i had in mind for a race go-kart build. Amazing work.
document that to build plz🙌🙌🙌🙌
When a motorcycle engine dies a transmission usually gets buried with it and this way you get to recycle the part that probably still works
where to find dead motorcycle engines with working transmission/??
What you have slapped together there is so awesome! 😎
Teacher......
👏👏👏👏👏👏
BROOOO!!WHY YOU SO GENIUS..nice projek 100000 subcribe bro
Thank you so much 😀
Good diy
He probably has 100 go karts now! Great job! 👍🏻
Yes, thanks
I was real impressed till i realized 4th gear is only 1to1 not an over drive so no speed gain over not using a trans at all. But you should be able to pull a pickup with your go cart now but impressive work
You could always change the gearing ratio between the gearbox and the axle to get a better top end. At least its something that works well and if you can build your kart properly or around it instead of trying to install this onto one, you can get really creative with speedy karts or even torquie karts, just like you said. Im still impressed none the less.
@@3v068 I was just about to tell him that. Lol. Common sense. You can still put that on something n hit 50 with the rite motor n gear ratio. Rite..
Wow 😲😲
Super good work bro. I love it
U r a genius
Top👍👍👍👍
Cool idea but the problem is, that it is to permanent. Imagine you have to change a bearing or a gear. You're fucked. You have to disasamble everything with your anglegrinder
do you have a video on how to build a non-permantn one?
Good job thank you
Good running
Superb
Thanks all
WoooooW good job . Nice work I like it . But can you mad this gear box with reverse?
nice
Thanks
Very nice and simple, probably best if it had more nuts and bolts for maitenance purposes, but this is not a bad start! Where would you find the spline shafts and gears though, junkyards?
Lovely prototype regardless
thanks
@@ksthacks Keep up the good work though, I would love to use your three speed and reverse concept transmission for a rat rod go kart I’m going to make long term.
Amazing 😍
Thanks 🤗 kênh bác vẫn chưa đc 100k sub nữa ah,
@@ksthacks uk bác. Tại trước lười up video quá. Nên bị tụt sub tụt view đến giờ vẫn không lên nổi. 😵
So its a dogleg pattern? Nice
Supar
WOW!
Thanks :d
Nota 1000.👍
Mntp bg👍
Nice
Thanks
Top
Made easy with the use of a welding machine and electricity ⚡️. I’m sure we can not build this in the bush with out those tools. Looks like a lot of welding. The question now is, is it cheaper to build it or by it?
probably buying it, pluse it'd be professionally made too, unlike us where there'll be mistakes and stuff in it
Thankyou soooomuch 4 no much
Very good work there
Thank you very much!
Wow that is awsome!
thanks you :)
so cool, i want to weld so bad
Very nice bro
Thanks
Amazing sir
Thanks and welcome
Very clever dude , well done 👏👏😁😁🤘🤘🤘
Thanks a lot!
Brilliant.
Step one: dismantle many transmissions over the years, collect and save any leftover parts.
Tuyệt vời
10/10
Master, i have a question.. if i pick a speed, can i release the gear shift? Or i need to put my hand all the time?
Bánh răng và bi hư có dễ tháo thay không
Parabéns👍
thanks :D
Dimana itu mas.keren
How much would you charge me to build me a 4 speed no reverse, and will it shift on the fly with a clutch.
great vid tbh
I'm putting this out there that this is better than rather B welding's transmission for a couple reasons #1 it's more simple and #2 it's built with stronger components.
Except rather B welding engineered everything. This guy took components from a different transmission and built a case.
yes :)
@@rcclassiccrawlers4368 and he even said his custom built gearbox would break as soon as a real load would be applied to it....
Nice Job.But how do you get the gear parts? Where were they build in?
in the gearbox of an old motorcycle
CG125 gearbox
Keren bos
very good at selling how much it costs my friend ,, amazing success always
Thank you very much
មានលក់អត់បាទ
I might be wrong. Do you have to keep pressing on gear handle so it will remain in certain shift as notice on Video???
you are right, i will have an upgrade for it
You made a gearbox from a gearbox... congrats
you hearted my comment but I was being sarcastic, you really did nothing
He's using moped gears btw, you can find them easily on junkyards since the Honda C series is the best selling vehicle in the entire world lol
So if I were to get these bearing clusters where would I get them for this project and what would I ask for? Part number or teeth count or what?
these are from a 100-200cc motorbike, probably a chinese honda-style copy
Gearbox with neutral next
You did A Great Build , you should go to college to be a Engineer.
Is this a older tutorial or will there be a newer one?
How can we get all those parts to make it pls. Reply asap
👍👍👍👍👏👏👏👏👏👏👍
MADJORIS, MUITO BOM!
How did you find these gear wheels..For example these wheels are on any machine
is great, how will be gearshift lever ,,stay,, on shifted gear?
Thank you
Watch carefully in the video
On this video or on next video?
Thanks🙂
Works without clutch?
Master make me your student 🤣
:)))))))
How can I adapt it to a mini bike
you can probably add magnets so that you dont have to hold the stick
I have noticed one thing,everyone who is giving negative comments has zero productive content.
Where can I buy that.
Boa noite.
Vc faz caixa de ré por encomenda
Next time Boys we will make a cake .
It's very simple.
First you get a cake.
And then you make it.
:)
Yeah be perfect until the slag gets in or one of those weak ass welds break Not to mention he probably toasted one or both of those bearings by welding it very smart but a decent example of how a transmission works
Co ban hôp sô tiền lui ko a
Gearbox honda wave 100cc?
It would be great if you could start a company,there are so many uses. 3-5 speeds would sell like ice water in Hell
Muy bueno de cuanto es ese juego de caja
PENA QUE SAO POUQUISSIMOS OS JOVENS CRIATIVOS!
Víp vậy a =))
Lubrification?
Có bán ko bạn
I’ll take one
WOW, U sell that?
oh no
@@ksthacks 🥲
Làm video giảm tốc đi
oke next time
Possible name of the tune
Làm bán cho mình bộ như này với nhưng làm 3 tiến 1 lùi được không ạ
mình không bán nhé :)
revers gear ka video banavo