@@lukethomson7361 It is a bit, not gonna lie. Its still a really cool thing to just have all the parts laying around to make, But at the same time, I get a little jealous of the people that seem to have boxes upon boxes of spare parts like that that they can use to build stuff.
@lukethomson7361 it is sarcasm, this guy literally took a good transmission and just rebuilt a rudimentary skeletonized case to show how it works... he's fooling viewers into thinking it's random spare parts.
Somehow you just happened to have all those parts that fit together perfectly on the two shafts that moved and mated where needed. It's as though it already was a gearbox in its previous form, akin to engineering plagerism - LOL.
I could not agree more. The welds on the clamp are a warning. And yes,they are his welds because the welds he does on this vid are as crappy as the welds on the clamp. So I'm with you. Dude took a small Japanese bike trans and just replaced the side-plates holding the gears! What he isn't saying is that on the motorcycle engine the gears are in an oil bath. He should have left it in the gearcase,this is a bunch of work just to run a trans dry.
@@Shadobanned4life hii, do you know of a cheap small gearbox, similar to the one slaughtered for this video. I need one for a low powered engine (3,5 hp) Edit: at 2800 rpm Not yet tuned
@@JIRAIYA_H4X even though there is a pipe on the bearing😅as a mechanical engineer myself😅😅when you bring bearing near to the heat it will loose its temper which will make the bearing loose its properties very soon😅hame esse hei sikhaya hei😊tat is why there are different types of bearings available...
Нечто подобное мы мальчишки в детстве делали со старшеклассниками . Ставили два велосипеда типа " зайчик " , " левушка " паралельно , сваривали раму , спаривали рулевое управление , ставили двигатель Д6 и делали такую коробку . Ездили не плохо но шум был большой .
i guess im randomly asking but does any of you know of a method to log back into an Instagram account?? I was stupid lost my login password. I love any tips you can offer me.
@Cody Nico i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff now. Takes a while so I will reply here later when my account password hopefully is recovered.
99.5% of people do not have all of the spare gears, rods, shift levers, etc on hand and would have to source out everything. Raising the cost of construction to an insane level
Great job 👏I give it a 2 👍👍up your mind works great there are many who have degrees in engineering And if you gave them the same parts they could never do it!! Not all but many !!
"let me look at my spearparts bin"
Finds a whole gearbox
"This would work perfectly "
ทำให้คนร้ายได้ใจ แบบนี้ ต่อไป ดูชีวิตจะรอดไม่ได้ 👲🏻👲🏿🏮🛒🎐🥡 และยังลอยนวล ไม่ยอมตนเองให้เป็นผล ของการใดไม่ให้เกิดอะไรขึ้น ได้ หรือ ทำแล้ว ทำ ทรัพย์ ของ ชีวิต สามอย่างที่ทุกคนเข้าใจ จากความคิดง่ายๆ แต่กลับด้าน คือการสิ้นสูญ ทำให้ ตกทุกข์ทรมาน จนสูญสิ้น ตั้งแต่แรกเริ่ม ในข้อมูล ทั้งหมด ปัจจุบัน ยังนิ่งเฉย ตั้งแต่ เริ่มต้น
THID RIGHT HERE GENTLEMEN
Is perfect to teach your little ones how a transmission works. Thx for sharing
From what is this part's are? Gears, shafts...
Motorcycle gearbox, looks like from a Honda supercub@@borivojetravica569
Love the way you presented everything here! The visuals and explanations were so easy to follow, especially for beginners like me. Keep it up!
Very nice ,and also add home made cluch
Sure 😊
Keren.. Ide yang sangat kreatif..
Wow you have quite the collection of sprockets & cogs!
This is not a video. It is a university of technology. Thank you for sharing.
From what is this part's are? Gears, shafts...
Oh look, you built a transmission, out of a box of broken transmission parts. Neat!
Why did this comment seem Sarcastic to me?
@@lukethomson7361 It is a bit, not gonna lie. Its still a really cool thing to just have all the parts laying around to make, But at the same time, I get a little jealous of the people that seem to have boxes upon boxes of spare parts like that that they can use to build stuff.
Boo
Exactly!
All he did was reassemble a motorcycle transmission using garbage he found as substitutions for the correct pieces.
😂😂😂
@lukethomson7361 it is sarcasm, this guy literally took a good transmission and just rebuilt a rudimentary skeletonized case to show how it works... he's fooling viewers into thinking it's random spare parts.
Хотя бы подшипники не приварены - уже уровень выше ютубовского)
Akhirnya aku bisa tidur malam hari
Karna masalah ku sudah terpecah kan dengan meninton video ini
That stick tho 😏
Неймовірно чудова КПП.
very good
Thanks
Good, respect your design
Hay đấy. Tốt hơn nếu thiết kế hộp ngâm dầu
đây chỉ là ý tưởng cho những bạn nào muốn làm để hoàn thiện hơn
Dios k le bendiga, exelente video ilustrativo 🫂🤝
Veri nice bro... motivation to me
👍 Тиски 😂😂😂
It needs oil now to shift smothly and stop stickin 😆😁 what a genuis
Amazing and inspiration.. Nice video
Nice gear box
Thanks 👍
Awesome. Recycling at its best! You need a lava lamp in your shop. All the cool kids have them. Aloha! Subscribed!!
Somehow you just happened to have all those parts that fit together perfectly on the two shafts that moved and mated where needed. It's as though it already was a gearbox in its previous form, akin to engineering plagerism - LOL.
I could not agree more. The welds on the clamp are a warning. And yes,they are his welds because the welds he does on this vid are as crappy as the welds on the clamp.
So I'm with you. Dude took a small Japanese bike trans and just replaced the side-plates holding the gears! What he isn't saying is that on the motorcycle engine the gears are in an oil bath. He should have left it in the gearcase,this is a bunch of work just to run a trans dry.
Alot of these guys are fake. Wierd how a box of random part perfectly fits together like this...
Ķkikkki
It's all out of a motorcycle or 4 wheeler tranny
@@Shadobanned4life hii, do you know of a cheap small gearbox, similar to the one slaughtered for this video.
I need one for a low powered engine (3,5 hp)
Edit: at 2800 rpm
Not yet tuned
You made a transmission convertion from a transmission parts. . Well done
Μπράβο πολυ έξυπνη ιδέα, αλλά καθόλου λειτουργικό. Οι τριβεις ρουλεμαν δεν συγκολουνται και σε περιπου 2 ώρες λειτουργίας δεν θα αντέξει τίποτα!
I'm been looking for this video for so long. Thanks to you
Awesome skil
sangat kreatif 👍
*_Fabulous work! Each project is both interesting and educational. I learn a lot about items and their workings just watching you._*
Thank you very much!
I, as a mechanical engineer, can say that the project itself is not bad. but when I see the bearings welded it takes me badly ....!
Bearing ke uper jo pipe lagai h vo weld ki h bhai
@@JIRAIYA_H4X even though there is a pipe on the bearing😅as a mechanical engineer myself😅😅when you bring bearing near to the heat it will loose its temper which will make the bearing loose its properties very soon😅hame esse hei sikhaya hei😊tat is why there are different types of bearings available...
I see that all the time on projects.
I always comment how the heat would destroy the bearings.!
you always get a choice to balance cheap/fast/good
No estan soldados los rodamientos mire bien , luego disocia.
Very nice gearbox.
Thanks 👍
AMAZING 👍👍👍👍NAXT ⏩⏩⏩
Well done like i KISs
Very very very very very nice
Thanks all
Great video. Absolutely awesome. Thanks for sharing.
Man o man, you had me at a big box of gears
Nice 👌
Que simplemente "DIDÁCTICO"
👏👏👏
Chào Quang , lâu quá mới thấy lại kênh bác
Chào DIY - V
Vry cool !
Great skill
Brother geniu!!!!
Нечто подобное мы мальчишки в детстве делали со старшеклассниками . Ставили два велосипеда типа " зайчик " , " левушка " паралельно , сваривали раму , спаривали рулевое управление , ставили двигатель Д6 и делали такую коробку . Ездили не плохо но шум был большой .
i guess im randomly asking but does any of you know of a method to log back into an Instagram account??
I was stupid lost my login password. I love any tips you can offer me.
@Kace Angelo Instablaster =)
@Cody Nico i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff now.
Takes a while so I will reply here later when my account password hopefully is recovered.
@Cody Nico it worked and I now got access to my account again. Im so happy:D
Thanks so much, you saved my ass :D
@Kace Angelo no problem :D
𝓢𝓾𝓹𝓪𝓻
𝓕𝓪𝓷𝓽𝓪𝓼𝓽𝓲𝓬.... 👍
Eres una ver felicidades gracias por compartir
Waaagh!
What a beautiful video, it has no other name, it has everything that I was looking for for a long time, I will be a fan of your channel
Thank you so much 😀
ឹ២ា២ាវវហកលោ្ហ
Good👍👍
Thanks for the visit
wooooooewwwwww
Top👍👏
Good,so nice
Thanks for watching
Great
thanks
Super bro
thanks :)
genial la idea, mi discrepancia, soldar las horquillas.
Respect to this man ‼‼‼
Cool
😍😍😍😍😍😍 very naice
thanks
Keren
99.5% of people do not have all of the spare gears, rods, shift levers, etc on hand and would have to source out everything. Raising the cost of construction to an insane level
Amazing
Thanks
Salut👍 good skill
jordar...
good
That's so cool
I really love uo work.
Super 👍🙏
Thank you very much
Good idea
Creative
wooow steady
Good work in deed
👏👏👏
Great job 👏I give it a 2 👍👍up your mind works great there are many who have degrees in engineering And if you gave them the same parts they could never do it!! Not all but many !!
Thanks 👍
nice
Thanks
Mantap sekali
👍 next 5 speed
Veri nice
Perfect brother..❤💯🤝🤝👍
Thanks ✌️
Super 👌 👍
Thank you
Excellent
Saya menyukai video anda
quá tuyệt vời
Awesome brother.....
Man that was perfect 👍 really awesome
👍🏻👍🏻👍🏻👍🏻👍🏻
Hay a ơi
Muito bom 👍
👍👍👍👍
Nice,, অনেক সুন্দর হইছে
Sehr Gut!!!!!!!!!!!!!!!!danke
👍
Aí é fera !!!
👌👌👌👍👍
Yay
👍👍👍👍👍👍
Nice man good idies
Good job! Seems to work well!
👍👍👍👌
👍🏾
Sao k làm cái số vòng như của dream hay wawe cho nó nhanh mà lành tính ad? Nghiên cứu số gật tiến lùi đấy kèm số lùi là nhất
Good luck and happy good