Philips Ultinon H7 LED Headlight for Kawasaki Ninja 300
Вставка
- Опубліковано 5 вер 2024
- 🔲 Hello Viewers,
I am Arka and I welcome you all to my UA-cam channel.
🔲 In this video I will share with you Phillips Ultinon H7 LED Headlight Setup for Kawasaki Ninja 300. So you can say this video as review & installation guide for Phillips Ultinon H7 LED Headlight.
🔲 You can buy this for ₹5625 by clicking the below mentioned link 👇
helmetdon.in/p...
🔲 If you like my videos, then don't forget to subscribe to my channel and hit the 🔔 icon.
Thanking You for Watching
Arka Roy ( / arkaroy1904 )
Kolkata, India
Darun light
No doubt about that. Darun mane khub e valo light. Ami nije use kore dekhechhi.
@@ArkaRoy Yes 👍
Great instillation vid and demonstration!! Going to order these bulbs for my 21 vstrom 650. Philips makes quality products
Thanks a ton for your appreciation. I really need this. ❤️
Sure. Go ahead and order this. But now the 2nd generation of the light is available. Please check it b4 buying this model.
@@ArkaRoy hey arka can you share the link please. I am not able to find these lights anywhere. Also, are the parking lights the same as the lights you used for the number plate?(h10 type)
@@Sabertooth93 no. plate light & parking lights are same. Osram T10 LED Light. U can try Philips T10 LED lights too. Both r same.
Try the link below to get the 2nd gen of the same light.
PHILIPS H7 Ultinon Essential G2 LED Lamp 6000K Luxeon (Pure White, 2 Pieces) www.amazon.in/dp/B08T6QR837/ref=cm_sw_r_apan_glt_fabc_12XBMSS9BMX19007FX6P
Or else try to find it in some local car accessories shop.
@@ArkaRoy Thank you
@@Sabertooth93 welcome bro
Good video. Just a couple of questions, is there enough space within the dust cover so you don't have to modify or cut it? And do you have any samples with ppl using versys 650?
Hi. Thanks for your appreciation for my video on Phillips Ultinon H7 LED Headlight.
I've got couple of answers for you.
*1.* Yes! There is more than enough space within the dust cover so that you don't need to modify or cut it.
*2.* I don't have sample with ppl using Versys 650, but I can tell you only one thing - the headlight setup of Versys 650 is identical to that of Ninja 300. So, FYI, it fits Versys 650 straightway.
But I'd recommend Phillips Xtreme Ultinon H7 LED Headlights for your Versys 650, I've upgraded from Phillips Ultinon H7 LED Headlights to Phillips Xtreme Ultinon H7 LED Headlights. The link of that is given below 👇
ua-cam.com/video/6QTU8W4jVwU/v-deo.html
Hi , Thanks for Demo. Can u plz tell about Battery consumption details between stock halogen light vs this LED?
I think I've discussed this too in this video. Don't worry. I'll tell again.
Stock Halogen consumes 55watt while this LED consumes only 14watts, but light output is same if not better. so, keeping the headlights on will drain your battery (halogen), but with LED, you don't need to worry about that. Stuck in a red signal for 3 mins, no need to turn the key off and on. Just kill the ignition and stand cool with one light always on. Bcz 14watt consumption is even lesser than the brake light that eats 21watt, nearly similar to single indicator, that consumes 10 watt. So, overall, the longevity of the battery will be enhanced. Hence for bike with no kickstart, this will be a great method to extend the battery life
Ничего не понял, но светят вроде качественно 👍🏼 мне кажется, что ближний можно чуть выше приподнять - яркость позволяет.
Привет, брат. Спасибо за ваш комментарий. Я пользуюсь помощью Google Переводчика. Из вашего ответа я могу понять, что вам понравилась яркость света. да, огни очень очень яркие. Вы можете попробовать их следующее издание, которое представляет собой Phillips Xtreme Ultinon H7 Led Headlight
Nighteye kesa hey...??
ninja 300 socket type asking while purchasing ...and also I would like to ask wether it will burn the headlight cover due to overheat ..???
Nighteye is good alternative for the stock bulb. You can go for that.
Select socket type as *H7*
It shouldn't burn the Headlight cover, bcz there is air vent inside the reflector, through which the moisture gets evaporated.
What is the parking lights model. Please share
Osram LED T10 2825DW-02B Parking Lamp White (12V, 1W)
👉 amzn.eu/d/bojn4DZ
So in long term does this harm the housing as led bulbs tend to get very hot and ninja 300 now comes will always on headlight.
Hi bro. Nice to have a query like this. 1st of all I need to tell the fact that yes LED lights tend to heat, but not as much as halogen lamp. Now Ninja gets 55watt halogen lamp which was AHO mode from the beginning. But this LED consumes only 14watt, almost ¼th of the halogen. So, if the heat generated by the halogen can't harm the reflector, then be assure that this 14watt LED won't ever harm the reflector even in one century also. Besides there is one small heat dissipation passage in all headlight reflectors. So, whatever heat will be generate, it will be passed on to the outer environment...
Nissan Terrano - Headlights.
Which is the best to use -
OSRAM - PHILIPS - Night EYE.
I want to set up the new lights because of No visibility at the night on current bulbs.
Suggest I am right or wrong.
Fog Light - H8 - LED - OSRAM - want to use.
Dipper Light - H11 - HID - OSRAM - want to use.
Upper Light - H1 -LED - OSRAM - want to use.
Or should I go for Philips or Night Eye?
Osram is no doubt one of the very good lights to have.
But don't go for Night Eye when u have the budget for Phillips.
Night Eye consumes unnecessary high watts and it scatters a lot. So, overall, road visibility will be limited, although from opposite direction, the Night Eye led looks brighter, because it scatters a lot😀
So, IMO, Osram is a very good led and it has good life.
Now, Philips will win in three aspects:
1. Less Watt Consumption
2. Perfect Light Spread
3. No Dazzle Beam
So, I'll tell u it's advantages:
1. Less Watt Consumption menas less stress on battery and hence long life of battery means electrical system in ur car will be perfect for longer period of time.
2. It's light spread is absolutely perfect. It illuminates the road in front of u. It scatters the least if not none.
3. It uses a technology known as “SafeBeam”.
It ensures drivers coming from opposite direction, to see the road clearly, ur headlight won't make them blind.
Now, if u consider buying Philips, then I'll recommend u to go for Philips Xtreme Ultinon, instead of Philips Ultinon. Because Xtreme Ultinon is the next model and more suitable for larger reflectors like that of car. Hence, first prefer the Philips Xtreme Ultinon LED, if not found, then Philips Ultinon LED. Again if not found, then OSRAM is perfect. If u r not satisfied with OSRAM or want to try something new, then go for Night Eye.
It emits more light ... does it damage the reflector or holder due to heat ??? ... I usually go long ride and it's on for long time !! Please help me
Brother it generates lesser heat than stock halogen. Stock halogen light emits at 55watt, besides, it's filament is heated and then the light comes. But in LED, this is not the concept. It consumes only 14watt current, this heat is very very nominal. It will no way damage the reflector..... U can use it for long ride or drive. If the light is turned on for longer time there is nothing harmful..... Go ahead & use it 👍
@@ArkaRoy thanku so much bro 👍
@@vinayakd.jujagaon853 u r most welcome brother....
Bro can I install it in Pulsar 220? Is this works with Projector beam headlight?
For Pulsar 220, the holder type will be different. This one is of H4 type. I believe Pulsar 220 has different holder pattern. Search with that holder type & u will surely get that in Phillips.
Yes, for Pulsar 220 it will be H7 type socket, but I want to know if this LED will works best with Projector beam headlight or it only suitable for reflector type headlights.
@@jasvindersinghjass146 it will work with projector also. Don't worry... Stay assured and go for it ONLY IF YOU ARE SURE ABOUT H7 WILL FIT INTO PULSAR 220.
How do we set the angle?
U have a adjusting screw just below the headlamp assembly. Rotate that clockwise for downward beam and anti clockwise to upward beam angle.
Will it fits on pulsar 220f 2014
I think no. Bcz Pulsar 220 doesn't support H7 bulb. It's bulb holder type is different
Philips perfect cut off lamp
Yes. True. You can try Xtreme Ultinon H7 Led also
@@ArkaRoy my car is corolla altis, bulb type is HB4 for low beam, i want try Philips ultinon Led HB4 for my corolla. I think Philips Very recomended Led for daily use.
@@Rendy.A.Nugraha yes. You can try the Phillips Ultinon Led Headlight. It's spread and range is superb but the cut line is so perfect that you'll feel like the light is coming out from Projector Lens.
Does this void the warranty of the bike ? And Will the showroom people do the fitting work or I have to get it done from outside ?
Installation of this led won't void warranty of your bike bcz it is plug n Play type led. The same setup is here in the led as compared to your stock halogen. So, warranty won't void anyway.
You've to fit it from outside. Bcz it's damn easy, remove the dustcaps & open the stock bulb, install this led and close the dustcaps. That's it. For this, the service centre will charge you a hephty amount. Better to get it fitted from outside.
What LED's have you used for the front small lights ?
Osram LED T10 2825DW-02B Parking Lamp (12V, 1W) for All Models www.amazon.in/dp/B08GFPNC8Q/ref=cm_sw_r_apan_glt_fabc_QPR62M8777D9QEPMVZ7B
Can we get the same fixed for Kawasaki Z800 ? And if yes any modifications needs to be made ?
First, make sure if Z800 has H7 type bulb holder. If it has H7 type bulb holder in headlight, then u can easily fit it without any modifications....
@@ArkaRoy Yes..Z800 has H7 bulb ..
Thx dude
@@kevinpietersen9962 Ok. Then it will be fitted without any modifications...
Exactly white eyes
Yes. That's right
@@ArkaRoy sexy devil
@@RiderTrippleS hahaha. Who knows better than u
Hi @ 04:59 'a screw to tight 'could you please be more specific , just purchased the same for my Ninja 300 and would like to refer to install
Hi. Thanks for writing. The screw is attached in the back side of the reflector. It is used to fix the spring just behind the bulb base. The spring pushes forward the bulb from backside and the Screw keeps the spring intact in its place so that it doesn't move here and there for the vibration of the motorcycle. So, once you remove the complete headlight setup and place it on your lap, you'll see the dust cap 1st. After removing the dust cap, you'll need to detach the H7 connector from the bulb. After that, you need to remove the screw to separate the spring from the bulb base,. After removing the spring, you can pull back your bulb from the reflector. That's it. Do u get it now or need more clarification?
Arka Roy noted , will try to fix and let u know if any help is needed , thank you
@@kabirariderite3128 sure sure. Let me know. U can Watch my another video to get better idea about how to install the light.
ua-cam.com/video/6QTU8W4jVwU/v-deo.html
Hi.
I want your advice on led.
Pls
Yes tell me bro how can I help u with my advice on LED?
Can it will fit in splendor plus old model
Don't fit it in that. Because it is not DC connected. The current comes via alternator, means after starting the ignition, the electrical systems turned on. So, the current from Alternator may damage the LED. So, I'll recomend u not to use it in Old Splendor models, but even if u have to use, then first make the headlight Connection DC (Direct from Battery) and then install this
Hi, good video ! My bike is an Honda cbr 1100 XX super blackbird, (2 x H7) do you think X-treme ultinon would perform good ? Also, I want to install leds in the instruments cluster (4 x T10) ultinon as well, to have a clear reading, which one do you think would be best 4000k or 6000K ? Thanks
Hi. Nice to get a long query. It's always splendid to reply. Anyway, I've used Phillips Ultinon H7 LED, now upgraded to Phillips X-treme Ultinon H7 LED.
You can see the difference in light output by watching the video by going to the link below:
ua-cam.com/video/6QTU8W4jVwU/v-deo.html
T10 LEDs in 6000K are always better to read instrument console. Because it gives almost similar light to daylight or modern day tubelight. In other hand, 4000K is yellowish, the reading won't be as attractive & bright as 6000K. So, if you're planning to replace your existing T10 filament type bulbs, then always prefer T10 LED type bulbs with colour temperature of 6000K. Yes, Phillips Ultinon T10 LED lights would be very good for visibility of the instrument console...
Best of luck with Phillips LED light family.
@@ArkaRoy thank you for your answer. Keep it up
@@Massimiliano-Fauci you are welcome brother
is it pure white of having little bit blue in colour
Yes. It is pure white, in fact pearl white to be precise. No blue tone in colour output...
@@ArkaRoy thanks for reply
@@aviyadav24 welcome bro
@@ArkaRoy I was very much confused.
Every where it is said that 6000kl has blue tint.
Now my confusion is cleared.
But Wat about lumen?
@@aviyadav24 the lumen is around 1300. Although it sounds less, but it's spread is so accurate that u will find 1300 Lumen to be a lot. Comparing to halogen, the visibility will be same. But the colour will be changed from Yellow to White. But the real benefit is in its watt consumption. Only 15 watt per bulb. So, it won't stress the battery of your motorcycle. So, this is a very good option for those motorcycles with Auto Headlight On (AHO) feature...
Can i use this in Royal Enfield standard?
For Royal Enfield I've a better light. Share your number. I'll contact u
Can you make video
Ultinon Essential Moto LED Motorcycle headlight bulb 11636UEMX1 LED HL HS1
Bro I'd have been happier to do this for you. But since I don't have any requirement of installing the same, I might not make a video on that. I'm really very sorry brother.
@@ArkaRoy it's ok
But now i am not getting the philips H7 from amazon, can you tell me is there any other option, where i can get philips H7? I bought Ninja 300 15 days a go, so is there any chance of void warranty if i install it?
If u don't slice wire, then no warranty void... If u r from Kolkata, share your contact no. I'll try to guide u
Are these road legal in India?? Can It be installed in i20 with h7 bulb
LEDs fitted aftermarket are not road legal anyway in India. But most of the cars use LED and police doesn't bother unless and until they are blinding the oncoming traffic. So, this Philis Ultinon H7 LED Headlight doesn't bling the oncoming traffic, because it uses a Trademarked Technology called *SafeBeam* using which the light falls only on the road. It doesn't scatter much. So, I can tell u that, this light won't attract the traffic cops because they are very pleasant to watch even from opposite direction. So, yes, u can safely use this H7 LED in your car.
Have you replaced both low beam and high beam?
Yes. But I've later upgraded it to Philis Xtreme Ultinon. Those are even better than Philips Ultinon models.
@@ArkaRoy do you have link for purchase?
@@unplannedcouple I bought them from Amazon, but unfortunately they are unavailable at present. Still I'm sharing the link from Amazon, u keep on checking the same after frequent intervals 👇
Philips 12985BWX2 X-treme Ultinon H7 LED Lamp (Set of 2_White) www.amazon.in/dp/B079M47M2B/ref=cm_sw_r_u_apa_fabc_Q4FH3J4VH898QMXWMCQ2
Which is best nighteye or Phillips or auxbeam?
Nighteye is the best Value for Money Light. It outputs good lumen, but it scatters a lot.
So, wastage of light will be there.
Auxbeam is better than nighteye in term of quality and longevity and it's beam is very accurate.
Phillips is the best, but it will cost u the most. So, if you're ok with spending money for Phillips, then it is worth. Bcz it consumes only 14 watts but throws excellent light with clear cut line below eye level.
@R D Chaurasiya Auxbeam will be Better in comparison with Nighteye
@@ArkaRoy thank you
@@rdchaurasiya6944 welcome bro
Thanks bro i will install the same.... bro any other option....
If you want to be legally safe, then go for this one. This is the only led I've seen which doesn't create glare to the oncoming traffic. Other LEDs may be brighter, but they utilise the reflector unevenly, and thus create a scattered light spread, which makes the oncoming traffic blind. So, better to go with this. Otherwise, you can search in AliExpress, there you'll get lots of powerful LED lights with more wattage consumption along with more lumen output. But, use them at your own risk brother.
Auxbeam if u travel a lot... The best led bulb
@@lostingoa130 what's the link to buy it? Can you share any UA-cam video link of Auxbeam
@@ArkaRoy www.auxbeam.com/headlight-bulbs
@@ArkaRoy I got the t1 series
Will this fot in yamaha r3 2018
Yes. Absolutely.
What is name of small led above h7 bulb?
Osram 12V 1Watt T10 LED Bulb
Hey will this it a 2013 Ninja Kawasaki?
Yes. It will fit. Make sure u have halogen bulb with H7 holder. It will fit if the holder is H7. But my believe, it will fit without any difficulties.
Applicable for kawasaki z250 2014 model?
Does it have two lights or one light with two beam - high and low?
If it is having 2 separate bulb for high beam and low beam, then it will fit. But if it has only one bulb with high beam and low beam, then u need this light in H4 model.
I have 2 bulb, separately
@@patrickrondina6664 then it will fit directly
@@patrickrondina6664 please subscribe to my channel 🙏
Friend, the model you used and Ultinon Essential both same ?
I am planning to install it in my Activa 3G. Is it a good lighting upgrade?
Essential is different and this model is different. Essential has fin type cooling system in the back. So, it may create problem while fitting the dust cap. So, it is recommended to use Ultinon model as it does not have anything extra in the back. So, it will create no prob while installing Dust Cap.
Better to check the Essential in offline store.
@@ArkaRoy Thanks for the information.
BTW, is Philips any LED versions Ultinon/Essential/Xtreme useful in oncoming traffic roads?
Also, do they provide good visibility on highways?
@@siddhesh2888 I've installed Xtreme Ultinon model too. But i doubt if it is available in H4 base or not. Bcz the X-treme Ultinon has the most powerful light in this range and it's visibility is Xtremely good. It's name justifies it price and quality. In Ultinon model too, the visibility is very good. But I've no idea about Essential. So, if u have to fit it in Activa, go for Ultinon one. It will consume less battery, only 14 watts, but light output is more than stock halogen bulb. It doens't blind the oncoming traffic. So, it is not disturbing when using high beam in city traffic or highway. So, 1st preference, Xtreme Ultinon, if it is not available in H4 Base, then go for Ultinon model.
@@ArkaRoy Thanks for this info
@@siddhesh2888 welcome brother
Hi, Arka, nice videos. I have a question here, I asked Phillips customer service, they say the bottom part is a fan, and if you detach the fan and just install the bulb, it may cause overheating. I'd like to ask if there is any issue with yours so far? Is everything still working alright? And is there any way that we can still attach the fan to the bulb after installing and securing the bulb in the headlight compartment, so that we still utilize the fan. I know the fan may require power to run, since I see there is a power cord attached to the base. Thank you
Hi Lee. Hope you are doing well and keeping yourself safe from Corona virus.
Thanks for your appreciation and inquiry.
*Answer 1:* You said that Phillips Customer Care Executive had told you that the bottom part consists of fan! Right? The bottom part doens't consist of fan and if you detach it, the LED won't work bcz the connector pins are fitted on the bottom part only. So, there is no option you can use this light without bottom unit. In Phillips Xtreme Ultinon model, they have fan unit and lighting unit, but in Phillips Ultinon model, they have lighting unit only. No fan unit.
*Answer 2:* my light is working perfectly. I've upgraded from Phillips Ultinon to Phillips. Xtreme Ultinon. There is no overheating issue or any other issue till now.
*Answer 3:* You can very much use the LED with fan installed. There will be no problem inside headlight compartment. You just have a look at my video made on Phillips Xtreme Ultinon H7 LED Headlights. Carefully watch the installation process, you'll get to know how the fan unit is placed inside the dustcap and after installing the fan unit, how it is looking. The link is given below 👇
ua-cam.com/video/6QTU8W4jVwU/v-deo.html
*Answer 4:* the fan requires very little amount of power and the total consumption wattage is including the power of the fan. So, rest assured that this fan alone can't damage your battery. So, keep aside all worries and tension, and go for Phillips Xtreme Ultinon H7 LED Headlights. If budget is constrained, then prefer Phillips Ultinon H7 LED Headlights.
Let me know your thoughts in this.
@@ArkaRoy Thank you very much for the detailed reply, and thank you for your concern, I am currently not in China now, but the virus is pretty severe. Luckily it’s getting better in China, but got worse in other countries. You too stay safe.
Yes, the customer service told me that the base on the ultinon model is a fan. Actually I asked a retailer on Taobao, if you heard of this Chinese shopping website, lol, they sell everything there. So I’m not sure if the agent there actually knows their products well or what, at least this is what they told me.
If we have to use the base in order to use the led lights, is it right to say that after putting the bulb in the headlight and securing it with the clip pin, we still need to attach the base and connect it to a power source from the bike? As I see in your first video at 4:50 after you detach the base, and at 5:37 after putting the bulb in the headlight, I don’t see you attaching the base to the bulb again, and this is what I see other youtubers do as well. That’s why I thought the base may not be needed.
However, I see in your second video when you install the extreme model, you need to do more work such as detach the fender on the side in order to connect the cable on the base to the bike. Does it require the same process to install the ultinon model as well?
Thank you Arka, have a great day.
@@ArkaRoy Oh, I might have understood, there should be an power cord connecting to the old bulb from the bike right? I'm confused because I don't have a bike yet, I am purchasing a used Ninja 300 today, I was watching led headlight videos already, lol.
@@leeyang4798 oh. Nice to know that you're not in China. Yes. The virus is severe. Oh. It's getting better? That's great for China as well bcz it will improve the stock market and GDP of the country and business in Asian Markets. Wish even speedy recovery.
I haven't heard of Taobao, sorry for that. But I'm sure their agent needs more knowledge about a product which is from a legendary company like Phillips. It may be their marketing strategy to sell their products.
Whatever it is. But the truth is that, Phillips Ultinon H7 LED Headlights don't have fan at bottom. That's the tagline.
In Phillips Ultinon H7 LED Headlights they have power cord exactly like OEM Bulb and this will fit with the male connector present inside Dustcap. So, you neither need to to cut the dustcap (which is the case of Phillips Xtreme Ultinon H7 LED Headlights) not need to cut the connecting wiring. It's direct fit without any alterations. So, u must use the base in order to use the LED headlight and I can confidently say that, after putting the LED in the headlight compartment and securing it with the clip pin, u must attach the base and connect it to the H7 power male Adapter from the bike.
In my video between 4:50 min and 5:37 min, I've just demonstrated to detach the base in order to securing the light unit with the clip pin, because with the base put on, you can't install the clip pin. The bigger base will create obstruction to the clip pin. So, detaching the base didn't mean to use the LED headlight without it, but it is to mean that you need to detach the base in order to secure fit the LED headlight inside the headlight compartment. So, it is very much required to make the LED headlight work properly. 😀
This is what other UA-camrs also try to show. But u misunderstood the whole things dear.
The Ultinon model doesn't need the side fairing to be removed in order to install it. The Xtreme Ultinon needs the fairing to be removed as it has two connectors, one for light and another one for fan, and it is bulky too, so, you've to take out connectors and attach it outside. That's it.
In order to install Xtreme Ultinon, you need to do lots of work. But the Ultinon model is lot more easier to install. Hope you have got your answers dear.
You are always welcome.
Put further comments if you still need clarification on these Xtreme Ultinon & Ultinon models.
@@leeyang4798 yes. Now you've understood rightly. It has one power cord inside the dustcap. The Phillips Ultinon H7 LED Headlight will connect to that only. It is Plug N Play type. No cutting, alterations required.
Congratulations for your new bike brother.
Once u buy the bike, let me know. I'll take your WhatsApp no. & Will add u in our Ninja 300 owners group where you'll find lots of informative information regarding Ninja 300
It's fit with stock dust cap? :)
Yes. Absolutely
@@ArkaRoy Thank you 😊
Hey Arka, just watched your other vlog on Xtreme h7 , I wanna upgrade to led lights my friends suggested me ultinon h7 but I guess you're suggesting ultinon Xtreme for highways and city ..can you please help me out buddy?
Sure sure. Y not. I've used both the lights from Philips, but Ultinon consumes only 14 Watt, hence light output is good for city commuting, but highway visibility is an issue
But in Xtreme Ultinon, the consumption is 25 watt, hence the light output is tremendous over the previous model. So, the city commuting visibility is more than enough & highway visibility is awesome too. Besides, the main advantage is, it doens't create glare to the traffic coming from opposite direction. So, if your pocket permits & need good highway cum touring visibility, then go for the Xtreme Ultinon H7 LED, but if you need the led headlight for city commuting, then you can prefer Phillips Ultinon H7 LED Headlights too.
@@ArkaRoy Helpful 👍🏻
@@aarjavshah416 thanks a lot brother
Can i use it in my vespa?
Yes. Of course you can. It will be best for your vespa as it has tiny battery and this LED Consumes only 14watt but produces great light
@@ArkaRoy thanx
Bro I've purchased ultinon essential will it fir in ninja 300?
If the base is H7 type, then it will fit. But the problem will occur while fitting dust cap as it has some fin type heat dissipator behind it's tail section.
@@ArkaRoy thanx for replying brother and yess it is h7 type... helmetdon.in/products/philips-h7-12972-ultinon-essential-x2-led-head-lights-6000k-luxeon-pure-white-2-pieces?variant=19423056625760¤cy=INR&gclid=CjwKCAiAhc7yBRAdEiwAplGxX8Q6VGxXg3qPsD-Az739Fzu-eVi2zOOAxHDzE3kpi2uov7QJrn8UERoCylwQAvD_BwE
here's the link can you please check it and tell me that if I'll fit or not
@@smanjot432 hi bro ,I've just checked it. It will support as it is H7 type. But the fin may create trouble while you'll try to install the dust caps. But I assume that a good mechanic can install the dust caps keeping the fins inside.
So, b4 installation, make it clear to the mechanic that u want the fins to be kept inside, nothing should be hanging outside. I hope this will work.
Nice friend
Thanks
Nice video dada.....ninja 300 frame slider er video banao nah.....kon frame slider tah best hobe
Thanks brother.
I've plan for frame sliders. But actually the price of one frame sliders is equals to two fairings. So, I was thinking of not installing frame sliders at least till I get full coverage from insurance. 😂😂😂😂
Still, at present, I'm thinking of installing Over Racing Frame Sliders which is giving 1 year replacement warranty also. Price is ₹12,400 only & the feedback is also positive...
@@ArkaRoy jah korbe sobei dam besi.......inline 2 bole kotha😄......full coverage insurence tar kotha ami oh vabchi😂😂
@@ptrvlogskolkata1758 hahahaah. *Premium* Tag ta Bose gechhe jakhon takhon dam tao premium e hbe, etai expected. But still, full coverage insurance thakle you can recover premium amount in single claim only. Jemom, Ami premium diyechhilam ₹18K er Moto. But Ekta claim e Amar uthe gelo ₹45K Moto. So, always go for the full coverage of the bike.
@@ArkaRoy ha dada ty korbo......etai best upai....
@@ptrvlogskolkata1758 that will be the best way Brother
Price?
I bought it for ₹5K. Now it may be increased. Kindly check on Amazon or look for it in local car accessories shop. Although now the 2nd Gen is available. Try to get the 2nd Gen one.
Nice bro 👌. Currently lamps are unavailable in the link bro.
Wait. It will be available. It is in high demand all the time. So it's availability is an issue. You can get it in car accessories shop too
@@ArkaRoy bro did you buy from helmetdon.in? Lights are cheaper there but am too skeptical to buy from there. Waiting for next Amazon sale.
@@ABHIHELLO123 I bought them from Amazon only.
How much would that be in dollars, man?
$93
Dada amr to 1 tai lage....arekta diye ki korbo...etai sob theke boro problem
1 ta hole price ta o kom hoto 😌
Ki bike ba scooty ba gari tomar?
@@ArkaRoy Activa 125 H4 socket lage headlight e.. 36/36 er Light use hoy..
@@parbinkumar007 tahole tomar ektai lagbe. Jai hok, upay ache ekta. Tomar number ta dao. Ami call korchhi
Honda x-blade Mein Lagane ke liye delivery Saudi Arab
Plzz coll mie 00966553385783 AZIZ khan
@@mehmoodhasain1897 buy it from Amazon.
www.amazon.in/dp/B07B27DM89/ref=cm_sw_r_cp_apa_i_VQ0vFb26J61WB
@@mehmoodhasain1897 By d way, XBlade me LED light ata hay to? At least India me LED wala available hay
Light looks scattered
It is reflector after all. U may never get streamlined light output like lens or Projector. So, this much scatter is expected, but it's not dazzling. It doesn't blind the oncoming traffic. That's its main benefit
Spelling mistake
Corrected