@doubledubs36 I had a few jamming using a aftermarket magazine so far. The factor magazine seems to working fine in this chassis. Right now it seems like a lot of negative reviews on the B14R regarding feeding issues. I haven't used the B14R long enough to really share my opinion yet.
I wouldn't change it to the 15, looks cool just the way it is. I actually had this chassis but could find weights for it so I switched to the MDT ACC. That chassis is about a half it longer and I don't like that.
Hey when you mounted your action to the chassis, did you have to trim the front screw? I just did the same build and the front action screw seems to be too long and there is about 1/4 inch of drop/play when you push down on the barrel. Ty in advance for the advice
@sos9887 yes I did, I tend not to mention much on modifying stuff but 1/4 inch is kinda correct. A quick cut or a stop to the local hardware store (Ace Hardware) should do. Replacement screw for the solus is available if you cut them to short.
So far this little rifle does good but I have learned that after market mags do jam often and the basic mag does better. Shimming the mags would be good if you have a dedicated brand and use often. I bought two L3I mags and one jams more than the other. NO jams with the basic mag at all. This chassis does allow a limited adjustment for mags which I think is awesome.
@yimao4265 So far so good, I will be doing an NRL22 match again soon before it starts snowing, Its kinda difficult recording matches when other participants don't want to be on camera. understandable, but I do put the chassis in all types of positions, I will upload a video before the year ends.
Just wondering, what kind of ammo do you use?
New rifles are always cool
@richardmattix5322
YES couldn't agree more!
Thinking about building a b14r myself, I was actually thinking about this chassis for it
@doubledubs36
I had a few jamming using a aftermarket magazine so far. The factor magazine seems to working fine in this chassis. Right now it seems like a lot of negative reviews on the B14R regarding feeding issues. I haven't used the B14R long enough to really share my opinion yet.
I wouldn't change it to the 15, looks cool just the way it is. I actually had this chassis but could find weights for it so I switched to the MDT ACC. That chassis is about a half it longer and I don't like that.
Looking at the 17”.. Is there enough room to mount a suppressor on the B14r? Considering the 17” and the 15” Solus.
Hey when you mounted your action to the chassis, did you have to trim the front screw? I just did the same build and the front action screw seems to be too long and there is about 1/4 inch of drop/play when you push down on the barrel. Ty in advance for the advice
@sos9887
yes I did, I tend not to mention much on modifying stuff but 1/4 inch is kinda correct. A quick cut or a stop to the local hardware store (Ace Hardware) should do. Replacement screw for the solus is available if you cut them to short.
thanks for doing this video. How has your build been holding up? Any issues with the Bergara action?
Shim the inside of your mag slot.
So far this little rifle does good but I have learned that after market mags do jam often and the basic mag does better. Shimming the mags would be good if you have a dedicated brand and use often. I bought two L3I mags and one jams more than the other. NO jams with the basic mag at all. This chassis does allow a limited adjustment for mags which I think is awesome.
Great video! Does that chassis perform?
@yimao4265
So far so good, I will be doing an NRL22 match again soon before it starts snowing, Its kinda difficult recording matches when other participants don't want to be on camera. understandable, but I do put the chassis in all types of positions, I will upload a video before the year ends.
cool dawg!
Please adjust the volume to 100%++++
Incredibly hard to hear you