Needed to set up my steering wheel buttons on my E82 135i. Same process, but had to use the E90 setting to activate it correctly. Thank you for the post!!!
Thanks for the assist... After installing mine and going to that menu it was set to NO CANBUS..... Have to pull the head unit to see what brand I have but tried a couple and found one to work.... Thanks again!!
Mine is set to no canbus and I tried to set up the steering learm to my steering wheel and now when I turn the volume up my unit goes black what do I do? Mine says no protocol on the network can settings and what exactly is network can settings
You're a legend! I had to do this on my Hyundai with a new head unit (Junda Navi), the factory code for me was 000000 (six zeros). Same process as your video.
THANKS YOU SO MUCH, i could not get the steering wheel programmed, but i found out not to do it in the factory menu but just swipe up because of you Thank you so much!
Yes, i did not need to do it in there but before you go in factory settings scroll down. You will find a menu where you can learn stering. It works on my Hyundai i10.
Do you have any advice I did it through factory setting and it was setup but now when I press on it my unit goes black while the side lights with power and home stay on and my unit will make static noises until come to a complete stop then to reconnect
Sound like a faulty unit. I would check wiring, if it is plug and play cables contact place you have buy it from. I got mine from china they was very helpful when I ask questions
I can’t get my steering wheel controls to work in my 2012 grand Cherokee at all…was told that it’s the same setting for a 2012 dodge Durango but I don’t see that vehicle listed either in the hikitty canbus
I've got the same unit. The steering wheel controls work with the CANbus, but can't bind them. I would highly recommend getting a car launcher. I HATE that default launcher.
I bought this same radio but I can’t find where it’s even connected in the back. I had a few items that didn’t match on the harnesses that were sent with the radio. Do you have a video showing where you hooked up the steering controls?
hola tengo un logan renault del 2016 con canbus no funciona volumen+ y no me deja configurar las teclas del volante manualmente alguna solucion gracias
Does anyone have any advice I did it through factory setting and it was setup but now when I press on volume up it lags then my unit goes black while the side lights with power and home stay on and my unit will make static noises until i come to a complete stop then to reconnect
If you have a canbus box fitted, go down the list and see if you can find one that works with yours, even if the name is different. Also do a quick ebay search for your vehicle for the canbus box, but make sure the connector is correct. never know someone might be getting rid of just the box.
@@Notalliswhatitseems nice 1 for the reply. I've sorted now, I have a vauxhall vivaro B and the canbus that came with the headunit was a simply soft, this is listed under Xinpu and the vehicle to select was renault. Just FYI for anybody with same problem/vehicle as me.
@@jayjackson9112how do you figure out which one is yours and how do you set it up cs I did it through factory and now when I go up on my steering learm my screen goes black and static mine says no protocol what exactly is network can settings
@@edwinrivas9532 If i remember correctly, i got in contact with the suplier, and they gave me a breakdown of what i needed to do, so I reccomend you try that. @edwinrivas9532
Hello, I bought the Awsafe V1 Plus and I can't get any sound through my speakers. My original rear view camera only comes on briefly and then goes off again. The black display then says “no signal”. Can you please help me? I bought and connected all adapters, decoders. Thanks
Im not tech support so dont know much, but ill try and help where i can, what car do you have? the camera issue is solved by using a 12v relay, as what tends to happen is the voltage drops off of the break light which is enough to stop the camera working, i had the same and had to wire in a 12 volt relay. for speakers, i can only assume without knowing, that you havent plugged them in correctly, that is just a guess as have no idea how you have wired it up.
@@Notalliswhatitseems Thank you very much anyway. I drive a VW Passat B7 and have connected the blue cable from the CanBus plug, the blue cable from the external radio adapter, and the red and yellow cables from the RGB converter. Everything connected together via wagon clamps. ua-cam.com/video/KQiXnaGDQvI/v-deo.html&ab_channel=DIYLeonmotors From minute 6:40 - 7:15 you can see how I connected everything.
I did a canbus update for my car and I turned off the power without wanting to when it was being installed. now it won't turn on. what can i do to start them? :(
Super late, but do you know how to turn of the reverse camera? I don’t have a reverse camera, but it automates to think I have one installed and it makes everything glitch.
I have the exact same unit can you please tell me if there's a way to bind 2 actions to 1 button for example I want the same button when I short press to increase volume and when I long press to change the song. I had a previous unit that you can select short or long press while configuring the steering wheel but this one doesn't
Should be on that little leaflet (install instructions) that comes with it, if you dont know, just try any combination of 4 numbers, ie 1111, 0000, 8888
Needed to set up my steering wheel buttons on my E82 135i. Same process, but had to use the E90 setting to activate it correctly. Thank you for the post!!!
Thank you for posting this video. This helped me get my E90 328i steering wheel buttons working (well most of them) :) Cheers!
Hello, can you tell me how you found out which setting you have to choose for "no canbus
Thanks for the assist... After installing mine and going to that menu it was set to NO CANBUS..... Have to pull the head unit to see what brand I have but tried a couple and found one to work.... Thanks again!!
Mine is set to no canbus and I tried to set up the steering learm to my steering wheel and now when I turn the volume up my unit goes black what do I do? Mine says no protocol on the network can settings and what exactly is network can settings
Thanks for the video. My heart skipped a beat after installing. 😂
You're a legend! I had to do this on my Hyundai with a new head unit (Junda Navi), the factory code for me was 000000 (six zeros). Same process as your video.
Thank you for the information 😊
THANKS YOU SO MUCH, i could not get the steering wheel programmed, but i found out not to do it in the factory menu but just swipe up because of you Thank you so much!
Were you ever able to custom set controls
Yes, i did not need to do it in there but before you go in factory settings scroll down. You will find a menu where you can learn stering. It works on my Hyundai i10.
Do you have any advice I did it through factory setting and it was setup but now when I press on it my unit goes black while the side lights with power and home stay on and my unit will make static noises until come to a complete stop then to reconnect
Sound like a faulty unit. I would check wiring, if it is plug and play cables contact place you have buy it from. I got mine from china they was very helpful when I ask questions
Do you know what canbus I would need to use in a 2014 toyota Camry
I can’t get my steering wheel controls to work in my 2012 grand Cherokee at all…was told that it’s the same setting for a 2012 dodge Durango but I don’t see that vehicle listed either in the hikitty canbus
Hello! Which canbus should i buy?? My Kia ceed have a radio touch...its ok? It Will work?
Thx that worked now how do I get zlink to work and rearrange app placement
How do you adjust the brightness? I looked on the setting but unable to locate it. TIA.
I've got the same unit. The steering wheel controls work with the CANbus, but can't bind them. I would highly recommend getting a car launcher. I HATE that default launcher.
Were you able to find a way to bind them?
Can't find a protocol for 06-11 civic having issues
Did you fix it?
Whats getting a different car launcher do? Does that fix the steering wheel controls? Is it just an app?
Can you tell us which car?
Thanks man i love you
Do you have a video of the temperature running? and speedometer
I bought this same radio but I can’t find where it’s even connected in the back. I had a few items that didn’t match on the harnesses that were sent with the radio. Do you have a video showing where you hooked up the steering controls?
what car you have?
Thank you!
where is the trajectory setting i’ve tried finding it and setting it up but i can’t.
How do you remove the volume beeping noise like when i use the volume button for low or high it beeps every time
hola tengo un logan renault del 2016 con canbus no funciona volumen+ y no me deja configurar las teclas del volante manualmente alguna solucion gracias
Thank you men
Does anyone have any advice I did it through factory setting and it was setup but now when I press on volume up it lags then my unit goes black while the side lights with power and home stay on and my unit will make static noises until i come to a complete stop then to reconnect
Hi mate. Any idea on what to do if the box they've supplied is not in the list? I've got a simply soft canbus but can't find it.
If you have a canbus box fitted, go down the list and see if you can find one that works with yours, even if the name is different.
Also do a quick ebay search for your vehicle for the canbus box, but make sure the connector is correct. never know someone might be getting rid of just the box.
@@Notalliswhatitseems nice 1 for the reply. I've sorted now, I have a vauxhall vivaro B and the canbus that came with the headunit was a simply soft, this is listed under Xinpu and the vehicle to select was renault. Just FYI for anybody with same problem/vehicle as me.
Hey bro great vid does the xtrons unit come with a canbus box on the main harness or will I have to buy a new one ?
@@jayjackson9112how do you figure out which one is yours and how do you set it up cs I did it through factory and now when I go up on my steering learm my screen goes black and static mine says no protocol what exactly is network can settings
@@edwinrivas9532 If i remember correctly, i got in contact with the suplier, and they gave me a breakdown of what i needed to do, so I reccomend you try that. @edwinrivas9532
Please tell me how to make the MODE button on the steering wheel? I have all buttons except MODE
Hello, I bought the Awsafe V1 Plus and I can't get any sound through my speakers. My original rear view camera only comes on briefly and then goes off again. The black display then says “no signal”. Can you please help me?
I bought and connected all adapters, decoders. Thanks
Im not tech support so dont know much, but ill try and help where i can, what car do you have? the camera issue is solved by using a 12v relay, as what tends to happen is the voltage drops off of the break light which is enough to stop the camera working, i had the same and had to wire in a 12 volt relay. for speakers, i can only assume without knowing, that you havent plugged them in correctly, that is just a guess as have no idea how you have wired it up.
@@Notalliswhatitseems Thank you very much anyway. I drive a VW Passat B7 and have connected the blue cable from the CanBus plug, the blue cable from the external radio adapter, and the red and yellow cables from the RGB converter. Everything connected together via wagon clamps. ua-cam.com/video/KQiXnaGDQvI/v-deo.html&ab_channel=DIYLeonmotors From minute 6:40 - 7:15 you can see how I connected everything.
I did a canbus update for my car and I turned off the power without wanting to when it was being installed. now it won't turn on. what can i do to start them? :(
Same here and not I can't get into the can bus settings. I think it killed the canbus.
I have installed a new Head Unit on my Toyota Aurion 2011 but can't get to this page can-bus
Every Canbus I choose just tells me there is not protocol for it. Then won't let me install. And can't get stereo to connect to WiFi.
I don’t see any of these options with my ATOTO
Super late, but do you know how to turn of the reverse camera? I don’t have a reverse camera, but it automates to think I have one installed and it makes everything glitch.
You need to mess with the camera quality to match with the rear view camera if that makes sense
I can’t find the setup for my 2014 Lexus CT200h can anyone help !?
Whats the setting for nissan Qashqai j11
What is the canbus? Is it the radio itself or another attachment
Its a box that plugs into the back of the unit.
I have the exact same unit can you please tell me if there's a way to bind 2 actions to 1 button for example I want the same button when I short press to increase volume and when I long press to change the song. I had a previous unit that you can select short or long press while configuring the steering wheel but this one doesn't
Did you find anything
@shameermalik5540 it's not possible on this unit, so I got another 1 that had it
Hello, how do I change the style or theme of that specific radio.
You need to download a new theme from the store. Also needs to Connect ti wifi first
Where do you find the pin to your radio?
Mine was in the badly translated instruction book.
How come my button on steering wheel showing wrong command.
If you go into protocol serttings in the factory menu you should be able to swap them around
We’re is the canvas box??
😂😂
How to stop open door ?
Grazie
Keep getting set up failed please try again.
Comment augmenter volume de Android
How do I deactivate the reverse camera? I'm desperate
What do you mean? it should turn off when you exit out of reverse, it should be wired into the brake light live wire.
@@Notalliswhatitseems When I drive, the reverse camera pops up for a short time and then goes away again
Czy wiesz jak ustawic kanały w tym radiu ?
How do you ring the password?
i cant enter the password pls help
Usually is 000000
How do u find the pass word
Should be on that little leaflet (install instructions) that comes with it, if you dont know, just try any combination of 4 numbers, ie 1111, 0000, 8888
Mine just says “password error!” trying any combination. Supposedly the password it 8888 but that doesn’t work…
How do you find your banbas code?
in the manual, its always 8888
A bit late but how do I know what my password is?
Mine was in the little booklet that came with it in badly translated Chinese.
@Notalliswhatitseems thank you so much for the response but I just randomly put six 0's and I got it😂🤷♂️
@@DogBread1 the codes seem pretty basic and ive not found a lock out yet lol
Time waste