It's funny how these vids are so much more pleasing to watch when they are this friggin SIMPLE AND TO THE POINT! no beating round the mulburry bush or up the river and through the woods talk just keepin it simple and TO THE POINT! So to you I say thank you sir
Been over seven years and this video is still relevant. Today my daughter and I replaced the faulty motor on her 2008 Jetta. Took less than an hour start to finish. Thanks for the video!
You Ryane Calme should be rewarded for your knowledge & this fantastic video! This should be taught to all VW dealerships and their technicians. It solved my problem on this super annoying noise that came right behind my 2008 VW Rabbit's glove compartment. I initially followed another UA-cam video and cleaned/lubed my blower fan motor assembly under the glove compartment, but didn't solve my problem. The noise would come back every time the Ignition was turned to on position and lasted up to 10 seconds. With your video, I went straight to the source of noise and simply disconnected the plug to the Recirculator Flap Motor. NOISE IS GONE FOREVER! Thank you, Thank you Thank you... Note: It's best to change the motor, but in my case, after I disconnected the RFM plug, I turned the car on with A/C and everything was working as normal, even the air ducts were changing position. Only the air recirculation system stopped working and that can be fixed by replacing the motor for $65 on OEM parts and $29 aftermarket part on ebay.
This saved my life. The dealership wanted $800 to replace it. Not real mechanically inclined, but following the video I was able to replace the flap motor in about an hour. Saved me a lot of money!!! Thanks!!!!
This was THE BEST step by step video I've ever seen. I followed this video to a T on my Jetta and was able to not only do it on my own but also fix the problem. Thank you a million times!!!
YOU DON'T NEED TO REPLACE THE PART!!! thank you for the great video. The part is repairable easily. If you open it with a flat head you will see whats wrong. The small motor inside is not sitting right and the gears are bearly in contact with each other, thats why you get that annoying noise. All i did was push the little motor back in place and placed a small piece of paper on top of the little motor to make sure it doesn't pop out of its place, and then i closed it up. And it worked really good. Cost me $0.
@@matthew5364 it's really easy I did it, just use a small screw driver to pry open the motor then just press everything back into place. Once you open the motor you will how simple it is. I hope this helps
@@matthew5364 no worries, the entire process is super easy I did it a few weeks ago. the glove box can be a bit tricky to put back in the clips for the screw kept falling out for me, once I got passed that smooth sailing good luck
Thank you for making this video! One hour later I had everything working and reassembled. I ended up carefully opening the motor assembly and finding the first worm gear was slipping (it made the same noise as in your video). The gear teeth all looked intact with no damage or missing material. Compressing the casing from outside seemed to cure things, so I shaved about 1/64" down in the plastic radius that receives the motor axle/bearing with a chisel tip. To compensate for this I added a thin, single ~3/4" x ~1/2" slice cut from hard plastic packaging behind the motor housing to help spring down on the motor's front end. Also, I moved some existing grease around to be sure everything was lubricated. It works 100% now, and hopefully this will last another 7 years.
Thank you for posting this video. I have a 2008 Jetta 2.0T and was having this issue for quite some times. My mechanic thought it was the blower motor, but he wasn't sure! He said I should just live with the problem since the car already 9 years old. I then went to the web to research for info and lucky your video save the day. I ordered the part on eBay ($19) and took me just over an hour to do the job. Thanks again👌
Thank you so much for this video ! I don't have a vast knowledge of repairing cars, but after watching this, I found the part in a junkyard in a car that already had the glove box removed. I paid $12 for it, and it took me about 40 min to put it in, and have everything back in place !
Thanks for posting this vid. Mine just took a dump and it took all of 30 minutes after I watched your video. Great job and thanks again! I do have to say you made sliding out the glove box look simpler than it is. Yours just slipped out toward the passenger side and mine was a real treat.
Thanks for this! It was a huge help replacing mine and I really appreciate the time you've taken to clearly document the process. It certainly saved me a bunch if head scratching and potentially breaking things or remove stuff that was unnecessary.
Thank you for the video! My car was so fogged up i could safely drive it. Dealership said the motor wasn't the issue and maybe I should just drive with my windows down in sub zero temperatures. Watched your video, 20 minutes later fog free. Thank you again.
Thanks for this video, Ryan! I had this problem with my 2008 Jetta 2.5. The VW place near my house, which does a wonderful job btw, wanted $280 to fix it ($240 was just the part). That place is great, but my jaw about hit the floor when they told me how much it was to replace a little servo motor. So I told them thanks for confirming my suspicion, but I'll just get the part online and do it myself. Sure enough the "genuine" VW part is like $250+ online. So I picked up a generic part that does the same thing for about $20 off eBay, fired up your video, and 15 minutes later the thing works like a charm!
Thanks for the easy to follow procedure. My flap was stuck open in recirculation mode, which was causing major problems with fogging and icing inside my car this winter, like I've never seen before. I had to scrape the windows on the inside most days and sometimes the ice build-up was so bad, I couldn't open the windows or sunroof. Looks like the motor wiring was either loose or the motor itself was starting to go, since at first the flap didn't move. When I moved the wires a little, the flap then closed. However, after testing the recirc button another couple of times, it would stick a little and the motor made a buzzing sound. I ended up putting the flap in normal mode (ie: closed) and then disconnected the wiring so it'll stay in that position. I'll order a new motor and change it in the spring time. Thanks again.
great video - i replaced mine today. We had a break in the winter weather, so i bought my motor from the VW dealer, the new P/N is 5Q0-907-511-H, this did not come with the large plastic gear, but it was easy enough to transfer from the broken motor. i would add the step about cycling the vent switch before installing the motor, as it resets the position prior to meshing the gears, but otherwise, an excellent video - you never know where all those screws are hiding.
Thanks for sharing your knowledge. This is one of those things that is "easy if you know how" and impossible otherwise. It's especially helpful to see how to remove "snap fit" items. Cheers.
Great video, very easy to follow. I opened the motor apart, found the problem was the gear on the motor was not sitting properly with the gear at the bottom. I put 3 layers of duck tape on top of the motor to push it down and put it back together. Problem fixed. Saved me $138.00 on motor and few bucks if I took it to a mechanic. Thanks.
Ariel, if the duct tape doesn't last, I found a vendor selling the motor on Ebay for $30. Look for part number 1KD907511B (same thing as the more expensive 1KD907511C).
Thank you for this video Ryan! It helped me diagnose and fix the problem with my wife's 2008 Jetta SE 2.5L. It only took about 30 minutes to replace the flap motor with your video, otherwise I am sure it would have taken hours.
I was about to make my own DIY video on this, but I think I'll save myself some trouble because you made this one so well! I really appreciate the numbered labels that you put over the video to point out the screws. Ingenious!
Also, does anyone know where to find one cheaper than $100? I think I'm going to just unplug it and leave it alone just to save some money. It doesn't seem too important of a replacement to me. (2006 GTI 2.0 FSI, btw)
@@Terrifier1984Wow blast from the past. 8 years later, I still have the same car and you’re right, I removed it without a replacement and I don’t miss it at all 😂
THANK YOU! Short, simple, & to the point! Very informative! Other similar videos of this repair I found was poorly edited and nearly 20 mins long for the same information. Nicely done!
Yes! ive knew it was something like this. I was scared to bring it somewhere to have them rip it all apart and charge me a fortune. You sir are a life saver!
OEM part No. 1K0907511C BEHR part No. 1KD907511B or 1KD907511C Not sure what the difference is between BEHR part numbers (B vs C) but the B appears to be more prevalent and cheaper. I used the 511B, it was a perfect fit and worked like a charm.
Thanks for the video. this is still helping people years later. I have had two Mark V VWs personally and they both needed this procedure to get rid of the annoying noise and restore functionality. I also assisted a buddies, same problem... so I assume pretty much all VW vehicles from this generation had this part fail. Now DIYers can fix it 😁
Mine went out over the summer... I didn't know how hard it would be but it seems like it's not horrible. I came across some videos of people removing the ENTIRE dash assembly... O.o
Thanks a lot,,,, you saved me a lot money.. I got a quote from the VW dealer, they said $350 labor and part, I got the part from ebay for $18,, and I followed your instruction... this fix cost me
Thank you so much for this video! I would've never taken this to dealership because I don't like giving them my money for stuff like this.. You just helped me avoid getting a headache while doing this to my car. You've saved a bunch of us money and time. You have a new subscriber, btw.
Thank you. Will be working on my 2007 vw rabbit. It's making the same sound and the dealer asked for $450. It kooks like an hour job at most. Thanks a lot for the video.
Excellent job on this video, Ryan! The stills and labels make it top shelf. Thanks so much! Gonna give this a crack this weekend. Then fix the muffler, add a USB port, and then flip the car.
Thanks for this video, this was really helpful. I found the glove box a little trickier to wiggle out but considering I found the part for $30 on ebay, worth the effort.
Thanks so much for this excellent video! I am not mechanical at all but I was able to get it done and back together again with little trouble thanks to your super clear instructions
Thank you a lot bro.. Seems like the teeth of my flap only fell off so only had to put it back in place but wouldn't have dared to start without this..
Super video ale nie ma potrzeby wymiany silniczka. Wystarczy rozebrac i zmniejszyc odstęp silniczka z napedem ślimakowym do niebieskiego wałka. Przesmarować, złożyć i dla pewności założyć opaskę samozaciskową by obudowa szczelnie przylegała. Czas pracy 1h + 2 piwa.
1:25 Is that a hose? Im trying to pin point vacuum leaks on my TDI, whats funny is after driving for a little while. Once i put the car in reverse the vents change into the defrost setting. Also has rough idle every now and then. I have cleaned most parts that were plugged with soot. DPF is fine, EGR Valve is clean. Checked vacuum hoses all around the engine bay and they all look great and are not leaking.
Great video. Tought this would solve my problem but I am still not certain. My car AC blows warm air from the driver's vent and cold air from the passanger vent. It only works when reciculating. Can anyone help me, please?
Thanks a lot, the video's fantastic help!!! My car's a Skoda Octavia (based on the VW Golf platform just like your Jetta) and yours was the only video I've found to get to the motor. My motor stopped working altogether but once I got to it and pried open the housing it started working again with the same exact buzzing. Im wondering now if I'm to replace it or just live with the buzz!
great video helped me figure out what was wrong with my flaps. turns out for me it was the first little motor that was not turning rather than the one you point to in the video. any idea what that part is called ?
oh wow i thought the whole air box had to come out to repair this one motor.. always wondered why they used mechanical flops and used an electronic re-circulation flap
wife took her jetta into the shop for no heat and they told her the flap motor was bad. I followed your video, step by step, and surprise surprise, it did not solve the problem. Shop said to bring it back in because something needed to be recalibrated. Looks to me it is open or closed, based on the recirculation selection. Did you have to recalibrate anything?
heyy Ryan thax for the video very good job.. i have a problem with the heating on my golf mk5 it heats only at the drivers side at the passengers side it blows cold air I suppose that is not working the motor of the temprature flap.. am i right? how i replace it? or how can i be sure if is it the problem?
Great video bro! I had a quick question would this motor cause my air not to blow at all? I replaced my blower motor already but it still doesn't work. :/
this system is designed to suck in air from another vent so you wont breathe in the harmful air when you reverse. At least that's what they were designed the system for. The door in the video which the motor opens and closes is probably stuck in a position the air is not moving correctly.
Awesome! Thank you for posting. I lived with the buzzing for a few weeks before figuring out what it was and waiting for the replacement to come in. In the meantime, my battery has been drained completely...do you think these are related??
Where would the vent selector motor be located? I have a problem with not being able to select the feet option. It only blows onto torso and windshield.
Thank you so much for this video! I ordered the part off of EBay for about 25.00 from buyer "yuliu82". "OEM Re Rirculation Flap Motor for Volkswagen VW Jetta Golf MK5 MK6 1KD907511B". Don't let the shipping times scare you. It got to me in about 10-12 days. The video led me through this with ease. The ONLY thing that gave me any grief was replacing the panel below the controls (at about 1:00 in the video). The "hook" portion aligned great, but the "tab/insert" pieces refused to seat. I took a beefy flat blade screwdriver, wrapped it in a dishcloth (so not to scratch the panel), aligned the blade under the tabs, and used the console "arms" as leverage to apply pressure. Snapped into place. Thanks again, Ryan!
It's funny how these vids are so much more pleasing to watch when they are this friggin
SIMPLE AND TO THE POINT!
no beating round the mulburry bush or up the river and through the woods talk
just keepin it simple and TO THE POINT!
So to you I say thank you sir
I know it's an old video, but I greatly appreciate it.straight to the point, helpful, no dumbass introduction or music. Good job dude🤙
Thanks to your video I was able to fix the car myself. Really appreciate it! And indeed the video is great.
Been over seven years and this video is still relevant. Today my daughter and I replaced the faulty motor on her 2008 Jetta. Took less than an hour start to finish. Thanks for the video!
Is this for hot or cold air fix? I have only cold air on passenger side.
You Ryane Calme should be rewarded for your knowledge & this fantastic video! This should be taught to all VW dealerships and their technicians. It solved my problem on this super annoying noise that came right behind my 2008 VW Rabbit's glove compartment. I initially followed another UA-cam video and cleaned/lubed my blower fan motor assembly under the glove compartment, but didn't solve my problem. The noise would come back every time the Ignition was turned to on position and lasted up to 10 seconds. With your video, I went straight to the source of noise and simply disconnected the plug to the Recirculator Flap Motor. NOISE IS GONE FOREVER! Thank you, Thank you Thank you... Note: It's best to change the motor, but in my case, after I disconnected the RFM plug, I turned the car on with A/C and everything was working as normal, even the air ducts were changing position. Only the air recirculation system stopped working and that can be fixed by replacing the motor for $65 on OEM parts and $29 aftermarket part on ebay.
This saved my life. The dealership wanted $800 to replace it. Not real mechanically inclined, but following the video I was able to replace the flap motor in about an hour. Saved me a lot of money!!! Thanks!!!!
This was THE BEST step by step video I've ever seen. I followed this video to a T on my Jetta and was able to not only do it on my own but also fix the problem. Thank you a million times!!!
YOU DON'T NEED TO REPLACE THE PART!!!
thank you for the great video.
The part is repairable easily. If you open it with a flat head you will see whats wrong. The small motor inside is not sitting right and the gears are bearly in contact with each other, thats why you get that annoying noise. All i did was push the little motor back in place and placed a small piece of paper on top of the little motor to make sure it doesn't pop out of its place, and then i closed it up. And it worked really good. Cost me $0.
I did the same thing
Chris could you make a video of the fix?
@@matthew5364 it's really easy I did it, just use a small screw driver to pry open the motor then just press everything back into place. Once you open the motor you will how simple it is. I hope this helps
@@elia2441 thanks Dude, i see what you mean going to try do mine this weekend
@@matthew5364 no worries, the entire process is super easy I did it a few weeks ago. the glove box can be a bit tricky to put back in the clips for the screw kept falling out for me, once I got passed that smooth sailing good luck
Thank you for making this video! One hour later I had everything working and reassembled. I ended up carefully opening the motor assembly and finding the first worm gear was slipping (it made the same noise as in your video). The gear teeth all looked intact with no damage or missing material. Compressing the casing from outside seemed to cure things, so I shaved about 1/64" down in the plastic radius that receives the motor axle/bearing with a chisel tip. To compensate for this I added a thin, single ~3/4" x ~1/2" slice cut from hard plastic packaging behind the motor housing to help spring down on the motor's front end. Also, I moved some existing grease around to be sure everything was lubricated. It works 100% now, and hopefully this will last another 7 years.
Thank you for posting this video. I have a 2008 Jetta 2.0T and was having this issue for quite some times. My mechanic thought it was the blower motor, but he wasn't sure! He said I should just live with the problem since the car already 9 years old. I then went to the web to research for info and lucky your video save the day. I ordered the part on eBay ($19) and took me just over an hour to do the job. Thanks again👌
Thank you so much for this video ! I don't have a vast knowledge of repairing cars, but after watching this, I found the part in a junkyard in a car that already had the glove box removed. I paid $12 for it, and it took me about 40 min to put it in, and have everything back in place !
Thanks for posting this vid. Mine just took a dump and it took all of 30 minutes after I watched your video. Great job and thanks again! I do have to say you made sliding out the glove box look simpler than it is. Yours just slipped out toward the passenger side and mine was a real treat.
Just completed the repair on my GTI. THANK YOU for this!!! I know I thanked you once but you deserve it again. 👍
Thanks for this! It was a huge help replacing mine and I really appreciate the time you've taken to clearly document the process. It certainly saved me a bunch if head scratching and potentially breaking things or remove stuff that was unnecessary.
Thank you for the video! My car was so fogged up i could safely drive it. Dealership said the motor wasn't the issue and maybe I should just drive with my windows down in sub zero temperatures. Watched your video, 20 minutes later fog free. Thank you again.
Thanks for this video, Ryan! I had this problem with my 2008 Jetta 2.5. The VW place near my house, which does a wonderful job btw, wanted $280 to fix it ($240 was just the part). That place is great, but my jaw about hit the floor when they told me how much it was to replace a little servo motor. So I told them thanks for confirming my suspicion, but I'll just get the part online and do it myself. Sure enough the "genuine" VW part is like $250+ online. So I picked up a generic part that does the same thing for about $20 off eBay, fired up your video, and 15 minutes later the thing works like a charm!
Thanks for the easy to follow procedure. My flap was stuck open in recirculation mode, which was causing major problems with fogging and icing inside my car this winter, like I've never seen before. I had to scrape the windows on the inside most days and sometimes the ice build-up was so bad, I couldn't open the windows or sunroof.
Looks like the motor wiring was either loose or the motor itself was starting to go, since at first the flap didn't move. When I moved the wires a little, the flap then closed. However, after testing the recirc button another couple of times, it would stick a little and the motor made a buzzing sound. I ended up putting the flap in normal mode (ie: closed) and then disconnected the wiring so it'll stay in that position. I'll order a new motor and change it in the spring time. Thanks again.
great video - i replaced mine today. We had a break in the winter weather, so i bought my motor from the VW dealer, the new P/N is 5Q0-907-511-H, this did not come with the large plastic gear, but it was easy enough to transfer from the broken motor. i would add the step about cycling the vent switch before installing the motor, as it resets the position prior to meshing the gears, but otherwise, an excellent video - you never know where all those screws are hiding.
Thanks for sharing your knowledge. This is one of those things that is "easy if you know how" and impossible otherwise. It's especially helpful to see how to remove "snap fit" items. Cheers.
Great video, very easy to follow. I opened the motor apart, found the problem was the gear on the motor was not sitting properly with the gear at the bottom. I put 3 layers of duck tape on top of the motor to push it down and put it back together. Problem fixed. Saved me $138.00 on motor and few bucks if I took it to a mechanic. Thanks.
Ariel, if the duct tape doesn't last, I found a vendor selling the motor on Ebay for $30. Look for part number 1KD907511B (same thing as the more expensive 1KD907511C).
Great video. Short, well edited, easy to follow.
thanks to videos like this, I was able to change it myself. and bought a motor for a low low price of 20 dollars.
$20?!!! Where? That's crazy cheap!
Thank you for this video Ryan! It helped me diagnose and fix the problem with my wife's 2008 Jetta SE 2.5L. It only took about 30 minutes to replace the flap motor with your video, otherwise I am sure it would have taken hours.
I was about to make my own DIY video on this, but I think I'll save myself some trouble because you made this one so well! I really appreciate the numbered labels that you put over the video to point out the screws. Ingenious!
Also, does anyone know where to find one cheaper than $100? I think I'm
going to just unplug it and leave it alone just to save some money. It
doesn't seem too important of a replacement to me. (2006 GTI 2.0 FSI,
btw)
Dont you wont miss anything
Many years haha but yea i bet you don’t miss it
@@Terrifier1984Wow blast from the past. 8 years later, I still have the same car and you’re right, I removed it without a replacement and I don’t miss it at all 😂
THANK YOU! Short, simple, & to the point! Very informative! Other similar videos of this repair I found was poorly edited and nearly 20 mins long for the same information. Nicely done!
Great guide - thanks Ryan. I am not mechanically inclined, but the walkthrough video helped me get the job done in under 45 minutes.
Yes! ive knew it was something like this. I was scared to bring it somewhere to have them rip it all apart and charge me a fortune. You sir are a life saver!
OEM part No. 1K0907511C
BEHR part No. 1KD907511B or 1KD907511C
Not sure what the difference is between BEHR part numbers (B vs C) but the B appears to be more prevalent and cheaper. I used the 511B, it was a perfect fit and worked like a charm.
This video made changing a broken recirculator flap motor on a 2005 Jetta a quick & simple process. Thank you!
Thanks for the video. this is still helping people years later. I have had two Mark V VWs personally and they both needed this procedure to get rid of the annoying noise and restore functionality. I also assisted a buddies, same problem... so I assume pretty much all VW vehicles from this generation had this part fail. Now DIYers can fix it 😁
Mine went out over the summer... I didn't know how hard it would be but it seems like it's not horrible. I came across some videos of people removing the ENTIRE dash assembly... O.o
Best video on VW repair yet. Fast and detailed. Thank You!
Thanks a lot,,,, you saved me a lot money.. I got a quote from the VW dealer, they said $350 labor and part, I got the part from ebay for $18,, and I followed your instruction... this fix cost me
I just replaced it! Took me about half an hour to do it! It's easy if we hav right tool! Thank you for ur video! It helped big time!!!!!
you are a life saver my friend.
for two days this noise been driving me crazy.
Thank You! Fixed mine using your video. Bought part for $15 on amazon. Installed in about 45 min.
I never post on UA-cam but thanks a ton man. Got the terrifying noise in my 2006 MKV GTI diagnosed and fixed for the cost of the part. Huge help man!
OMGosh! I did it! Thank you so very much, my husband had his major doubts! I saved enough to buy a new purse!!!
Karen Baker-Ollila hahahahahh
Thank you for posting this video! I replaced mine this weekend on a '08 Golf GTI MkV. It took a little over an hour.
Thank you for this video! Just did this on my friend's 08 Jetta, super simple, and now 100% fixed!
Thank you so much for this video! I would've never taken this to dealership because I don't like giving them my money for stuff like this.. You just helped me avoid getting a headache while doing this to my car. You've saved a bunch of us money and time. You have a new subscriber, btw.
Added to saved videos for future project, this motor has been a pain in my ass since I bought this car. THANK YOU.
Best video for Flap Motor replacing, thanks
This is awesome advice! Thanks! My AC has been warm and i get the buzz for a few seconds. It happens when I reverse or use my wipers.
Thank you. Will be working on my 2007 vw rabbit. It's making the same sound and the dealer asked for $450. It kooks like an hour job at most. Thanks a lot for the video.
Thanks for taking the time to make this video, much appreciated
Excellent job on this video, Ryan! The stills and labels make it top shelf. Thanks so much! Gonna give this a crack this weekend. Then fix the muffler, add a USB port, and then flip the car.
David DeMarco did you manage to pull it off? I'm about to do it but Iam a little scared to mess something up
THANK YOU! Exactly what I needed for my 08 Jetta 2.5 Done in less than 30 minutes. I bought the flap motor from eBay for $25.
Well done tear down video, waited months putting off this 15 minute job lol
Thank you so much! Just finished the job and so pleased with the silence now.
Thanks for this video, this was really helpful. I found the glove box a little trickier to wiggle out but considering I found the part for $30 on ebay, worth the effort.
Thank you for putting this video together, I finally got around to replacing my rattling motor and it was a piece of cake using his as a reference!
Yay for diy videos
Great video! My girlfriend loves her Rabbit and this video helps diagnose the exact problem that she is having.
Thanks!
Thanks for posting this! It's coming in handy for me in 2021!
Thanks so much for this excellent video! I am not mechanical at all but I was able to get it done and back together again with little trouble thanks to your super clear instructions
Easy, took me 10 min, steps were perfectly described.
Thank you very much! This is exactly the problem i have with my golf V. Saved me a trip to the shop.
Great tutorial!! Finally my A/C works again like it is supposed to!! If only I had found it sooner, but thanks!!
You're welcome. Glad to share.
Brilliant video my man, thanks for keeping it classy; one fix checked off the list!
Thank you a lot bro.. Seems like the teeth of my flap only fell off so only had to put it back in place but wouldn't have dared to start without this..
Really nice video. Like the numbering on screws. Great job!
Great video! Replaced valve in US 2005 Jetta 2.5. Part new from China $17.99 on eBay. A little hard to wiggle back in. Great instructions.
thank you this was super helpful......took seconds to remove after watching....
Thank you very much!! I just done this job today on my parents Golf V
Best video ever. Thanks so much. You made this repair super quick and easy. My car is happy again.
Thanks a lot!! This buzzing sound was killing me. Awesome video guide!!!
Thanks for this great video! Saved me time, $$$, and rid me of that annoying dead motor noise.
Straight and to the point. Thank you for making this.
Thank for the DIY, just ordered mine for $60! Stealership wants like $300 for the part and service!
This is how to make a diy video. Straight to the point! No talking bullshit. If i wanted talking I'd go to pintrest
Great video, straight to the point.
Thank you for sharing this.
Super video ale nie ma potrzeby wymiany silniczka. Wystarczy rozebrac i zmniejszyc odstęp silniczka z napedem ślimakowym do niebieskiego wałka. Przesmarować, złożyć i dla pewności założyć opaskę samozaciskową by obudowa szczelnie przylegała. Czas pracy 1h + 2 piwa.
Very informative and well made video! Thanks for saving my sanity!
1:25 Is that a hose? Im trying to pin point vacuum leaks on my TDI, whats funny is after driving for a little while. Once i put the car in reverse the vents change into the defrost setting. Also has rough idle every now and then. I have cleaned most parts that were plugged with soot. DPF is fine, EGR Valve is clean. Checked vacuum hoses all around the engine bay and they all look great and are not leaking.
Thanks for this! My GTI started buzzing this morning.
Thanks for the video. Was able to do the job on a 2008 VW Jetta. Basically same steps, excepts for less connections.
Great video. Tought this would solve my problem but I am still not certain. My car AC blows warm air from the driver's vent and cold air from the passanger vent. It only works when reciculating. Can anyone help me, please?
Me too. Is this video for cold or hot air problem?
just wanted to give thanks for the video. This really helped!
Good Job man !!! I had the same problem an due to your movie I could change the motor within 30 min.
thank you !
Great video thanks I just started having this issue will attempt to tackle this project once I order the part
Thanks a lot, the video's fantastic help!!!
My car's a Skoda Octavia (based on the VW Golf platform just like your Jetta) and yours was the only video I've found to get to the motor.
My motor stopped working altogether but once I got to it and pried open the housing it started working again with the same exact buzzing.
Im wondering now if I'm to replace it or just live with the buzz!
Thank you very much for uploading this!
Thanks for the video. I just replaced the motor and the buzz is gone!
Great video with good instructions!😄
Great video! It helped me change the part and the car is fixed. Thanks!
great video helped me figure out what was wrong with my flaps. turns out for me it was the first little motor that was not turning rather than the one you point to in the video. any idea what that part is called ?
oh wow i thought the whole air box had to come out to repair this one motor.. always wondered why they used mechanical flops and used an electronic re-circulation flap
There is an important part of the video that you did not show us: the moment the you put off the old flap, and then how you put the new one :(
This is gonna be a life saver when i need to do this.
Thank you so much for posting this!!!
Omg thank you so much!!! You are the man!!! You saved me so much money I am so thankful for you!!! Please post more videos :)
wife took her jetta into the shop for no heat and they told her the flap motor was bad. I followed your video, step by step, and surprise surprise, it did not solve the problem. Shop said to bring it back in because something needed to be recalibrated. Looks to me it is open or closed, based on the recirculation selection. Did you have to recalibrate anything?
Your mom
U are the real mvp thank u now i can sell this car top dollar
heyy Ryan thax for the video very good job..
i have a problem with the heating on my golf mk5 it heats only at the drivers side at the passengers side it blows cold air I suppose that is not working the motor of the temprature flap.. am i right? how i replace it? or how can i be sure if is it the problem?
Thank you very much. This helped a lot!
Great video bro! I had a quick question would this motor cause my air not to blow at all? I replaced my blower motor already but it still doesn't work. :/
this system is designed to suck in air from another vent so you wont breathe in the harmful air when you reverse. At least that's what they were designed the system for. The door in the video which the motor opens and closes is probably stuck in a position the air is not moving correctly.
Awesome! Thank you for posting. I lived with the buzzing for a few weeks before figuring out what it was and waiting for the replacement to come in. In the meantime, my battery has been drained completely...do you think these are related??
Thanks Ryan. I have a 2008 Jetta and that noise has been bothering us for over a year. What year was the Jetta you made the repair on?
Where would the vent selector motor be located? I have a problem with not being able to select the feet option. It only blows onto torso and windshield.
Thank you so much for this video! I ordered the part off of EBay for about 25.00 from buyer "yuliu82". "OEM Re Rirculation Flap Motor for Volkswagen VW Jetta Golf MK5 MK6 1KD907511B". Don't let the shipping times scare you. It got to me in about 10-12 days.
The video led me through this with ease. The ONLY thing that gave me any grief was replacing the panel below the controls (at about 1:00 in the video). The "hook" portion aligned great, but the "tab/insert" pieces refused to seat. I took a beefy flat blade screwdriver, wrapped it in a dishcloth (so not to scratch the panel), aligned the blade under the tabs, and used the console "arms" as leverage to apply pressure. Snapped into place. Thanks again, Ryan!
thank you very much. I have 3 months that sound just finally :)