For future soldering I’ll give you a tip. You heat the wire and then apply the solder directly to the heated wire. That’s how soldering is supposed to be done. If you do it this way your solder will just flow into the wire and make a great bond. It helps prevent cold joints and other solder problems. The only real issue with this method is not having enough hand. You want crocodile clips on octopus type arms to hold 2 wires together while you operate the iron and the solder.
These were files I found a while ago and held on to them until I got a printer large enough. I believe these have since been purged by the Inquisition for their heresy.
The pieces are hollowed out, about 1.8mm wall thickness on average. Chassis and chaos armour panels used around 4kgs of resin including failures, but that'll increase as there's lots more to come
www.amazon.co.uk/Cordless-Mini-Rotary-Tool-Set/dp/B0D2KW6V3N/ref=mp_s_a_1_94?crid=2L4W3XXBXANPC&dib=eyJ2IjoiMSJ9.Q6i1iM5bPEB_Dx-oFEMQFSrL6se9Xo05WPbvumYRKN3TbeDyoFbiltZMAjwhGoQDrvXgcNU-67iZsTg7HYOsOK35UDevbdnZThKYofpPsvSDMOG7QlWcnhf9QyWSibkcKhzCr-5ASBeliHJ8386rzJCG0HRERWix4UiBz8zk0z7vj8-4LnzX6YJ3pC57dRt8.FRHawcyEngOVLKkCUGcPeMhJjXu07LV0IjNPUO6YOms&dib_tag=se&keywords=rotary+tool&qid=1721671636&sprefix=rotary+%2Caps%2C114&sr=8-94 is the closest I could find, seems mine isn't sold anymore
Great video dude excited to see the full journey!
Thanks! More to come soon.
For future soldering I’ll give you a tip.
You heat the wire and then apply the solder directly to the heated wire.
That’s how soldering is supposed to be done.
If you do it this way your solder will just flow into the wire and make a great bond.
It helps prevent cold joints and other solder problems.
The only real issue with this method is not having enough hand. You want crocodile clips on octopus type arms to hold 2 wires together while you operate the iron and the solder.
😂 it definitely felt like I needed a third hand! Thanks so much for this advice, it'll definitely come in handy for the weapons!
Saw the latest painting video and immediately got hooked! Decided to go back and watch this beast fully come together :)
Im doing the exact same thing, glad i can binge it!!!
Where did you find the stls for this friendly servant of the Grandfather?
These were files I found a while ago and held on to them until I got a printer large enough. I believe these have since been purged by the Inquisition for their heresy.
If only someone was able to share them via private message.
@@craigjones7343well you could share the file by email.
@@craigjones7343I too would love these files for heresey reasons 😂
@@craigjones7343 Was there a possibility for sharing ? There´s plenty interested heretics out there
HOLY SHIT THIS IS 40K SCALE!??!?!??!? I THOUGHT IT WAS AT SCALE!!!!
Ooh yes, 40k scale 😉
nice
how much resin did it use?
The pieces are hollowed out, about 1.8mm wall thickness on average. Chassis and chaos armour panels used around 4kgs of resin including failures, but that'll increase as there's lots more to come
Did you design this model yourself in blender or did you get it designed for you?
I'm not that talented sadly, its a re-working of files that have sadly been taken down now
@@DireDiceTabletop really? why?
What printer btw?
Do you have link to the sanding tool ur useing
www.amazon.co.uk/Cordless-Mini-Rotary-Tool-Set/dp/B0D2KW6V3N/ref=mp_s_a_1_94?crid=2L4W3XXBXANPC&dib=eyJ2IjoiMSJ9.Q6i1iM5bPEB_Dx-oFEMQFSrL6se9Xo05WPbvumYRKN3TbeDyoFbiltZMAjwhGoQDrvXgcNU-67iZsTg7HYOsOK35UDevbdnZThKYofpPsvSDMOG7QlWcnhf9QyWSibkcKhzCr-5ASBeliHJ8386rzJCG0HRERWix4UiBz8zk0z7vj8-4LnzX6YJ3pC57dRt8.FRHawcyEngOVLKkCUGcPeMhJjXu07LV0IjNPUO6YOms&dib_tag=se&keywords=rotary+tool&qid=1721671636&sprefix=rotary+%2Caps%2C114&sr=8-94 is the closest I could find, seems mine isn't sold anymore