I wanted to thank you for helping me with the installation. The result: before: a wheelie machine that would shake its head under hard acceleration and high speeds. After: A pure sports bike that keeps its line like a locomotive under the exact same conditions.
Thanks for your install and subsequent ride demonstration videos. Based on your experience, I ordered the Hyperpro steering damper for my '23 MT-09 and plan on installing it this weekend. Great work.
It’s so often mispronounced. Always makes me cringe. Dampener (3 syllables) is something used to make something more wet. Damper (2 syllables) is something used to attenuate something.
Eyy bro, great vid, thanks to your vid I know how to install this Hyper pro on my MT09 2021 . First coffee and then sum fun and ride , test, adjust, ride, adjust and gooooooo whieeeeee
Brazil!!!!!! Thank you for watching the channel 🙌 the gentleman Fabio that hooked me up with this part is from Brazil too. You all are a beautiful people ❤️ thank you for watching the channel and checking in. Be safe!
On one of your older video's you show a metal plate,"I don't know what it's called", but you replaced it with the wind screen, if you have the name & model and where you got it, or the link would be great, TY
@@MIKE-wq3xl ok sounds good. I will make an update on the install. I have the clamp upside down lol but it’s not a big deal. I’m human lol but keep an eye out for the update or just read the instructions. Not like how I did lol upside down lol
On the ring that clamps too the forktube i would prefer to have close to 0 gap on the outside and then bigger gap on the inside. it will tighten uniformly anyway. And 8-9 nm is absolutly nothing people, you have to use loctite and its super important not to over torqe this becouse you will destory your suspension. I feel with these small clamps on fork tubes its gonna break either way one day.
hello, just want to ask if you dont mind, can you have a video of steering damper while your are moving it? just curious, that hole where you install the main bracket does it move while turning the handle bar?
@@chaderpelding5033 my bad. I will do it. The last three months have been crazy. I got engaged. My dad was hospitalized and was in really bad shape. Then the holidays. An now I got a new job. So a lot has been happening. But I plan on doing that video next. Hopefully within the next week or two.
Not sure if wanna use that, would have to take it off to put on a headstock paddock stand, plus it would get crap in it, wouldn’t it be better if you got the Yss fitting kit?
I notice this one is under the handle bars but there is another kit that sells about the bars near the rider, what made you choose this one ? And wouldn’t someone be able to use Both for even more stability???
Please, help me. I need a steering damper for a kawasaki z900 year 2022. I need exactly the same mounting kit. where can i buy it? thank you for your help. 👍👍👍
I saw a guy lowering the headlights on a MT09, after the lowering mod the front of the bike made more sense to me…maybe moving your headlights down a bit would Harmonize the front of your bike as well.
With my broken clavicle healed up. I don't think that would be right for me. Once I get my bike I don't think I can afford that add on. Plus I think I would be riding that fast..........Maybe.
You can attach it to the hole on the engine (lift stand to work on the disassembled engine) near the exhaust manifolds. You just have to stretch the cables a little, run them down beside the radiator and the radiator pipe. Unfortunately I can't send you the photo
Just got my 2021 mt09 sp and I’ve had wobbles under heavy acceleration and at about 70+mph. We’re you having similar issues? Did you have any wobble before the dampener? After? Thx!
You have to select the brackets I’m pretty sure and check out but they should all be on the same link. You can even email them and they can assist you.
Hey wait that's black and gold. It doesn't match your bike at all. But it would match my SP perfectly. I'll be by this weekend to pick it up. LOL Great content as usual Yari.
lol what are you? My English teacher lol 😂 sorry bro, just not super good at spelling or grammar apparently. Plus I don’t play, I quit school because of Recess 😎 ride safe. I’ll try better next time.
I wanted to thank you for helping me with the installation. The result: before: a wheelie machine that would shake its head under hard acceleration and high speeds. After: A pure sports bike that keeps its line like a locomotive under the exact same conditions.
Thanks for your install and subsequent ride demonstration videos. Based on your experience, I ordered the Hyperpro steering damper for my '23 MT-09 and plan on installing it this weekend. Great work.
Wow! That is a really nice product and I am impressed with how they built it to be installed. Simple and hopefully effective. Very nice.
Steering DAMPER. Thanks for the vid!
It’s so often mispronounced. Always makes me cringe. Dampener (3 syllables) is something used to make something more wet. Damper (2 syllables) is something used to attenuate something.
Installed the same a few months back on my MT 09 2021…I was getting a very slight wobble at about 110 not that I am there much but sure helped…👍
Hyperpro Steering Damper Mounting Kit 2013-2023 Yamaha MT-09 which one did you exactly
get
Great tutorial. informative, detailed (vocally and visually) and explained in a way that everybody can easily understand. good work :--)
Hi quick question is that round peace which mount inside the head and brat is this shoul move around? 4:35
No. Needs to be tightened and snug.
Eyy bro, great vid, thanks to your vid I know how to install this Hyper pro on my MT09 2021 . First coffee and then sum fun and ride , test, adjust, ride, adjust and gooooooo whieeeeee
Excited for the review!! Thanks man!
YamaYari, hello from Brazil and thank you for one more great video.
Brazil!!!!!! Thank you for watching the channel 🙌 the gentleman Fabio that hooked me up with this part is from Brazil too. You all are a beautiful people ❤️ thank you for watching the channel and checking in. Be safe!
hello from Croatia hehe
@@aressimbamt0959 Thank you for watching all the way from Croatia.
Good video is saved a lot time by reading the instructions manual, thanks 👍
I had a hyperpro suspension installed wich also fixed the problem
On one of your older video's you show a metal plate,"I don't know what it's called", but you replaced it with the wind screen, if you have the name & model and where you got it, or the link would be great, TY
The metal windscreen I had before was from Www.mustardbikes.com
@@yamayari8351 got it TYVM
@@MIKE-wq3xl ok sounds good. I will make an update on the install. I have the clamp upside down lol but it’s not a big deal. I’m human lol but keep an eye out for the update or just read the instructions. Not like how I did lol upside down lol
Where did you place to horn? Great video and I just got my hands on the same damper and wondering what did u do with the horn 🤷🏾♂️
I have a video sharing where I relocated it. Check my 2021 mt09 playlist.
i was afraid wacthing older models of mt09 to buy new one.. but on 2022 never felt any nestabilyty on front even on high speeds
Damper 👍
Gday there, Was wondering what you did with your horn cos I noticed it was missing in the video ?
I have a video on my MT09 playlist. Check it out. Thank you for watching.
Nice. Looks good. It’s a great add on to the bikes.
Thank you! Can’t wait to try it out.
Nice job. Looks amazing. Let's see how that worked out.
Hope your well Danny! Blessings to you always.
You mounted the stem on the fork upside down... It goes under the support, not on top 🤦
On the ring that clamps too the forktube i would prefer to have close to 0 gap on the outside and then bigger gap on the inside. it will tighten uniformly anyway.
And 8-9 nm is absolutly nothing people, you have to use loctite and its super important not to over torqe this becouse you will destory your suspension.
I feel with these small clamps on fork tubes its gonna break either way one day.
hello, just want to ask if you dont mind, can you have a video of steering damper while your are moving it? just curious, that hole where you install the main bracket does it move while turning the handle bar?
Where’s the video of u relocating the horn? Or can we just leave it in the same position?
Very nice. Looking forward to see how it works. I’ve priced these in the past and 500 dollars is a bit steep for me.
It is pricey. Wait for my ride review, may be not needed for you feel me? But I’m really happy I got it. Can’t wait to truly test it out.
ua-cam.com/users/shorts0GYGJz65jNg?feature=share
@@yamayari8351 So where's the ride review for the steering dampner?
@@chaderpelding5033 my bad. I will do it. The last three months have been crazy. I got engaged. My dad was hospitalized and was in really bad shape. Then the holidays. An now I got a new job. So a lot has been happening. But I plan on doing that video next. Hopefully within the next week or two.
@@yamayari8351 can't wait! love your videos
With speed wobble try to lower your center of gravity as well as what you said :)
Please how did you put the adopter together
Amigo saludos yo tengo la misma moto MT 09 v3 , te hago una pregunta si mejoro la vibración en la parte delantera con el estabilizador de dirección?
I might have missed it, but where’d you relocate your horn?
Hello sir, I have a question can I install with tracer9gt plus? Thank a lot😊
Es verdad q parte esas patas del chasis donde va puesto
Where can I get the pdf. Could you send it to me?
Not sure if wanna use that, would have to take it off to put on a headstock paddock stand, plus it would get crap in it, wouldn’t it be better if you got the Yss fitting kit?
Possibly. I just think for me this was the better way to go. But you do have some solid points. Thank you 🙏
Pull your clutch in if you ever get into a “death wobble”
I notice this one is under the handle bars but there is another kit that sells about the bars near the rider, what made you choose this one ? And wouldn’t someone be able to use Both for even more stability???
You can
Did u get the RSC reversed or linear CSC?
Please, help me. I need a steering damper for a kawasaki z900 year 2022. I need exactly the same mounting kit. where can i buy it? thank you for your help. 👍👍👍
Not sure on that one. Try the same link I shared and call there office. They may be able to tell you better.
I want to know if you can make the DRL's brighter
Not that I’m aware of.
So does it work?
Ohhhhh yes it does! I’m trying to do a review but been so busy. Sorry. I’ll try next week.
Is this the progressive or the linear?
That rear bracket looks kinda flimsy, for pushing against the rotation of the damper
Looks like it. But trust me. I tried to bend it to see how strong it was and I could not! It’s a solid bracket.
Hi ! Is horn relocation required before you can do this install ?
Yes. It must be relocated. I have a video on it. Check it out.
I saw a guy lowering the headlights on a MT09, after the lowering mod the front of the bike made more sense to me…maybe moving your headlights down a bit would Harmonize the front of your bike as well.
Will try that. Thank you 🙏
tag the video... not sure what you mean
Hey brother what bar end mirrors do you run on your MT09
CRG arrows. Got them off cycle gear :)
Thank you be safe👊
Good evening, does the shock absorber and other yellow parts come together or do you have to buy separately.
Sold separately. You can pick between black and gold hardware. Thank you for watching.
Hola, tiene el link, o se consigue por AliExpress?
Donde vives amigo?
sir can you send us link on hot to order this item?? thanks
www.pureperformancecycles.com/hyperpro-steering-damper-mounting-kit-2013-2021-yamaha-mt-09-fz-09.html
@@yamayari8351 thanks much. i always watch your videos
Damper or Dampener that is the question ?
Lol 😂
Steering wheel!! 🤣🤣
Would this fit a 21 Tracer 9 ?
Unfortunately no. Good question.
With my broken clavicle healed up. I don't think that would be right for me. Once I get my bike I don't think I can afford that add on. Plus I think I would be riding that fast..........Maybe.
Heal soon and take your time. I’m sure you’ll find out your limits. Ride safe bro!
Where did you relocate your horn? Any help is greatly appreciated
Check my MT09 playlist. I made a video on it.
You can attach it to the hole on the engine (lift stand to work on the disassembled engine) near the exhaust manifolds. You just have to stretch the cables a little, run them down beside the radiator and the radiator pipe. Unfortunately I can't send you the photo
I have mine at 8 ckicks and find it enough for a fast pace.
Thank you 🙏 I will try that out.
Just got my 2021 mt09 sp and I’ve had wobbles under heavy acceleration and at about 70+mph. We’re you having similar issues? Did you have any wobble before the dampener? After? Thx!
Yes. That’s why this part is a must!!!
Nice!
Don’t forget to remove the horn bracket 1st
brackets included in the link?
You have to select the brackets I’m pretty sure and check out but they should all be on the same link. You can even email them and they can assist you.
Review please👍
Hey wait that's black and gold. It doesn't match your bike at all. But it would match my SP perfectly. I'll be by this weekend to pick it up. LOL
Great content as usual Yari.
Lol 😂 I’m sure it would!!! Hope to see you soon and thank you 🙏 your good people!
Fuck yeah same man!! Anything gold and I’m in 😅😅
@@filiplaskovski9993 I just had my wheels powder coated gold. 😁
@@haneymoto sweet man!! 💪🏼
Will this fit the 2022 xsr900?
I almost would say yes. But not 💯 sure.
@@yamayari8351 took a dive and bought one! Let’s just hope it’ll fit 😂
@@JuanRoxas15 I’m pretty sure it will. Send me a pic through IG or my Facebook page. I would love to see how it looks. Thank you 🙏
how to order?
Link is in the comments section.
This guy called the bars a “steering wheel” 🤦🏼♂️🤦🏼♂️
I did lol 😂
They do the same job😂
steering wheel..?? seriously..? a 'Damper'...not DampNNNer.
lol what are you? My English teacher lol 😂 sorry bro, just not super good at spelling or grammar apparently. Plus I don’t play, I quit school because of Recess 😎 ride safe. I’ll try better next time.
Does this work with the 2021 xsr900??