You’re quite the Renaissance man - designing, building an amp from scratch and then editing the video with your own sound track.! Thanks for sharing all your talent!
Amazing video. I can't believe you cut corners though and didn't build your own plasma cutter from scratch! :) I especially liked that music at the end. This was one of your best ever videos. I hope it gets the attention it deserves.
Thanks, Brad. Actually, I built the plasma cutter several years ago from some old bed springs and a doorknob, but my camera battery was dead so I couldn't make a video :( Glad you liked the old George Strait tune......it's one of my all time faves. Thanks for your kind words and good wishes :)
It still hits me in the feels to see my top two youtube content creators engaged in dialog on each other’s channels. Love you guys please keep educating and inspiring! I’ve been afraid that we’d lose tube amp knowledge and skills but the interactions here prove otherwise and you all are a big part of keeping the tradition alive. Many thanks.
You're welcome, Bill. I feel confident that Brad shares my appreciation for your kind words. Thanks so much for watching and commenting. We'll both strive to keep on providing interesting, informative videos for all you great viewers out there in UA-cam Land :)
Goodness gracious, Uncle Doug you are a real treasure. These videos stand as a testament to just how powerful a life can be if one just engages and endeavors. Thank you.
Thanks so much, Glenn. Don't waste your time worrying about some pathetic, inbred, slobbering losers who live at home with their mothers and work as geeks in the local freak show. I don't ;)
UD each project increases in complexity and design and I'm already looking forward to the next one. You sir are an artist, engineer, designer, fabricator, fellow hot-rodder and a great teacher. Thank you for bringing us along for the ride - and the drone flights!
This will be a FANTASTIC project! For decades now, I've been gutting old radios just for the cool looking cabinets, then installing modern guitar amps inside. My amp knowledge is nowhere near yours, but I have had some successes with that strategy. For a guy with YOUR expertise? I LOVE this idea! I'm sure your amp will be better than that overpriced imported faux deco amp. Can't wait to see it!
Anyone who can involve a plasma cutter in a guitar amp build is a legend in my book! Actually thinking about it an old welder might make quite a cool 'steam punk' guitar amp housing...
Thanks so much, John. The only way to make them affordable would be to automate the cabinet construction. Otherwise, even at minimum wage, the cost would be prohibitive :)
Wish I was closer Doug. I was a certified TIG welder as well as a certified Toolmaker for 30 years. Would have been my pleasure to weld the chassis for you. Now I'm putting my time into electronics and amp repairs plus playing in a band every weekend. Your videos are very inspiring and informative and always entertaining. Keep them coming my friend.
I love TIG over any other welding process. It is so relaxing to do and rewarding when you get a really nice weld. It reminds me of an artist with a brush and paint. I love welding stainless steel the best, aluminum is fun too but takes a bit more practice controlling the heat constantly. As you progress your base metal gets hotter and puddle widens so you have to make adjustments with foot controller on the fly. I know you'd have no issues learning it. If you ever did any oxy/acetylene welding with filler rod you can do TIG.
This doesn't look too bad for a low priced unit. If you want a Miller or a Lincoln your looking at close to $3k for a TIG. This has high frequency start which is a must(no touching metal to start arc) and a foot controller. If you could find a good used Miller or Lincoln that would be ideal. www.amazon.com/dp/B00AFM33R0/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B00AFM33R0&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=a54d13fc-b8a1-4ce8-b285-d77489a09cf6&pf_rd_r=ZXMH4A8XC8CQ1QP3ZF7K&pd_rd_wg=PfYyU&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=vDiEz&pf_rd_i=desktop-dp-sims&pd_rd_r=74203541-9c04-11e8-8a22-f3d4eee18e06
Uncle Doug, You are a certified badass. Ive been learning so much from your videos and I wish I could thank you in person but this will have to do I guess. So, thank you so much man!
That is so cool. It is all about having the right tools! I never got into metal work, wish I had. You can make anything if you have the equipment and the skills. I had a friend that made a scaled bulldozer mailbox. It was so cool. I don't have enough popcorn to last until the second video!!! I can't drink beer anymore, so I am in a mess!
Good idea to have a template to go by on this build Uncle Doug. Especially when you have to bend the shapes. That plasma cutter is definitely the way to go. That's a really nice job putting that cabinet together. Thanks for sharing Uncle Doug.
I have been a big fan of Art Deco for many years, and I find your execution of the design to be much better than the original! Looking forward to the amp build, and a look at the finished product. Many thanks for your great videos, they are always of great production, and very educational, plus they are a much watch for "The Real Life Adventures of Jack the Cat".
Uncle Doug I am in a new subscriber. I'm so glad that I found your Channel. I have been studying old radiotron books and searching for information on tube amplifiers for several years now and I have been experimenting with tube amplifier circuits. But you have really show me a lot of things that I did not understand and I truly appreciate it and you truly are a wonderful teacher.
Next is the 2lb coffee can mini-amp. p.s. outstanding work. This is how craftsmanship crosses over to art. And I thought southern AZ was dusty and many shades of brown.
The build is amazing, and your skills are too. It is already very beautiful half finished as in this video. But, to me, it is a lot of work, and a case of be careful for what you ask for or want. The problem is you saw the original unique piece, liked it, and since there are none others to buy, you made it. An alternative would be to just keep looking and maybe come up with a whole other project or find another similar amp or similar art deco case to whatever, and then insert an amp into a case that was already made in a factory that already had all the tooling set up, etc. Just from a resource perspective. But for an educational video, this video is 5 stars. Now on to part 2.
Thanks, Jeff. The problem is......I'm not a patient guy. When I see something I really like and can't buy, borrow, or steal it......I'll try to make it myself. In this case it was indeed a lot more work than I expected.
Oh a plasma cutter. We have an ESAB at work, I love it! Very nice work on the cabinet. I must say the perforated steel looks so much better than expanded metal, good choice! Also the craftsmanship is top notch! Starting from scratch like this and to have everything line up perfect is quite a feat indeed! You sir are truly a craftsman! Thanks for sharing this with us. Looking forward to part two. That Jack is quite the cat! Such a master of disguise, lol.
You Sir are a genuine artist in whatever medium you choose to work with. You are also a man after my own heart, using whatever materials that you are able to lay your hands on. I am currently building a bookshelf for my wife from the salvaged baseboard and trim lumber from our former home that was first cut about 1920. I think that you should name your amp the ”Thunder-Vibe” due to the embellishment you have designed for the front panel. Try not to injure yourself moving that 16 gauge beast around once you get the transformers into it. The drone flight, all I can say is. ”My how the area has grown in the last 40 years”, beautiful video and rendition of ”Amarillo by Morning”. This is an exciting and really fun looking project. I love the ”I could build something like that, even better than the original for less money” attitude. I can't wait for part 2. Well got to go out to the shop and get back to sanding boards that were coated with shellac in 1925, fun, fun, fun.
Thanks so much for your very nice comments and advice, Mark. You recall the exact location of the video......right at the southernmost tip of the Rockies, overlooking downtown EP as well as Old Mexico and New Mexico. Good luck with your project.
Idea for the fan. We use lower DC voltages (5 to 7-ish) to run 12-volt computer fans. This helps to reduce the fan noise by running them slower then spec'd. You could tap off and rectify your 6-volt transformer output to save a few parts (addition transformer). Fun build.
Hi Doug, if you don't need the fan running at full speed, you can save the extra 12V transformer and simply run the 6.3V filament voltage through a bridge rectifier with a decoupling cap. The resulting 8-9V DC should be enough to spin the fan.
That's a top-notch suggestion! I always use PC-fans for the DIY-stuff that i build for my electronic bench (power supplys, DC loads etc.). Usually I even throw in a linear regulator to adjust the fan speed by trimmer or pot on the rear. 8-9V will sure be enough for the fans to spin up.
Amazing! love how you refuse to be beaten by sellers that want an arm and a leg for things. besides, your amp is going to be even better than anything on offer. looks supercool! cannot wait to see / hear the result. cheers!
@@UncleDoug Oh i sure did watch all of it! needless to say this thing turned out gorgeous! and sounds great too! but you had help of your cat, changes everything.. cheers!
Very cool project Uncle Doug! I always liked the art deco look, but unfortunately i do not have the skills nor the tools to make this myself. But it is truly a joy to see you creating this cabinet from just a sheet of metal and some other parts. Can hardly wait until part 2 is there. Thanks!
Thanks, Alfa. I must admit that this project kept me in the workshop quite a bit, but I got so tired that I did sleep quite well after work was done :)
Doug, you've outdone yourself on this. What an amazing amp cabinet.... you are truly a craftsman on this stuff - you've made it look easy but I know it is not. Very very very nice work. Ron
Uncle Doug you are an artist in your skills myself I have an artsy side but usually leave my masterpieces framed in porcelain and glossed in toilet water . However I did stay in a Holiday Inn last night ........
Hi Doug Greetings from down under, I watched this video with an increasing sense of Deja Vu all of a sudden I was in the Apprentice Training School back in 1970 fabricating my first job which was a hand made Tool Box with lots of bends and welds(with OXY) ours was a bit easier we used cold rolled Sheet Metal not as strong but easier to work with than the less malleable hot rolled(due to its crystalline structure) I don't think I could do it now! its a great job as always Doug we appreciate your time and the hard work and planning you put in to all your projects
Thanks so much, Steve. Coming from someone with experience in the challenges of steel fabrication, especially with stiff, crystalline hot-rolled steel, your compliments are particularly appreciated.
I really appreciate the time you spend producing these videos; the radio shell looks awsome and i would love to build one myself but I dont have access to all the required tools. Maybe I will build a simpler version, as finances allow. There are so many people around with poor manners these days, I suspect the person selling the radio which inspired this video just speculates in old equipment and had no interest in the radios preservation or maitenance and thats why they didnt reply to you. I was looking for a valve tester and found one on Ebay at $1500, really overpriced. I made what I considered a reasonable offer; I did receive a reply, a hurl of abuse and foul language. I replied "just a simple yes or no would have sufficed". Roll us back to the late 50s to mid 60s when America, Uk, France etc. were great respectful Nations. God bless the polite citizens of the world. Thank you for a really exceptional video from which I learned so much. Thank you.
You're welcome, IG. Thanks for your very nice comments and support of my project. I agree with your assessment of the deterioration of manners and respect in our society. I'm proud that virtually all of our viewers seem to be "old fashioned" polite individuals like yourself :)
So very different to your other amp cabinets but every bit as good, really "snazzy". I remember your Tremoverb build and I bet the neighbours do too, so they should be pleased with the Plasma cutter. Your aluminium wrap around bars, front panel dress trim and the round control dials suit the Art Deco style perfectly. Your imagination is in good shape. And we are going to get Tremolo, which I think is a must have. I/P jacks on the left hand side of the cabinet would permit them to be right near the pre-amp tube, just a thought. Colour? Cream, your hot rod truck blue, red or even black would look great. Thanks for the drone trips, they are providing a very nice panorama of your countryside for those of us who have never been there and a pretty tune as well. Thanks once again.
Thanks for all your very nice comments, Jeff. Yes, the neighbors prefer the plasma cutter by a margin of 10 to 1, with the one holdout being a semi-deaf old man who loves the sound of hammering and cussing. He says it reminds him of his first marriage :)
You’re quite the Renaissance man - designing, building an amp from scratch and then editing the video with your own sound track.! Thanks for sharing all your talent!
Thanks so much, Prof. X.....glad you enjoyed it :)
Amazing video. I can't believe you cut corners though and didn't build your own plasma cutter from scratch! :)
I especially liked that music at the end. This was one of your best ever videos. I hope it gets the attention it deserves.
Thanks, Brad. Actually, I built the plasma cutter several years ago from some old bed springs and a doorknob, but my camera battery was dead so I couldn't make a video :( Glad you liked the old George Strait tune......it's one of my all time faves. Thanks for your kind words and good wishes :)
It still hits me in the feels to see my top two youtube content creators engaged in dialog on each other’s channels. Love you guys please keep educating and inspiring! I’ve been afraid that we’d lose tube amp knowledge and skills but the interactions here prove otherwise and you all are a big part of keeping the tradition alive. Many thanks.
You're welcome, Bill. I feel confident that Brad shares my appreciation for your kind words. Thanks so much for watching and commenting. We'll both strive to keep on providing interesting, informative videos for all you great viewers out there in UA-cam Land :)
@@billedwards2657 me too!!
Goodness gracious, Uncle Doug you are a real treasure. These videos stand as a testament to just how powerful a life can be if one just engages and endeavors. Thank you.
Thanks so much, Adam. I really appreciate your kind comments.
Incredible workmanship. Bending those radii and getting all sections to meet flawlessly is true display of mastery.
Thanks, Kevin. You're right about the challenge of section matching......but that's what makes it fun :)
Doug I've been in sheet metal for 30 yrs and I gotta say you did one excellent job on that cabinet.
Praise from an expert means a lot, CN.....Thanks !!!!
Aw your dryness has me in stitches
You are indeed a craftsman, sitting back - watching you design and fabricate, is both entertaining and educational.
Thanks so much, Nic.
Excellent CAD design. Cardboard Aided Design
I don't understand why anyone would give a thumbs down on any Uncle Doug's videos. It blows my mind. This guy is pure talent!
Thanks so much, Glenn. Don't waste your time worrying about some pathetic, inbred, slobbering losers who live at home with their mothers and work as geeks in the local freak show. I don't ;)
You know 99.999% of us love you :) Screw the others who don't.
Nice project .Looking forward to part 2.We viewers always appreciate your efforts.
Thanks, Ron :)
UD each project increases in complexity and design and I'm already looking forward to the next one. You sir are an artist, engineer, designer, fabricator, fellow hot-rodder and a great teacher. Thank you for bringing us along for the ride - and the drone flights!
Wow, thanks so much, Randy. You're quite welcome. We really appreciate your very kind remarks :)
I am amazed at the craftsmanship and attention to detail Doug possesses. Just outstanding work.
Thanks so much, T :)
This will be a FANTASTIC project!
For decades now, I've been gutting old radios just for the cool looking cabinets, then installing modern guitar amps inside. My amp knowledge is nowhere near yours, but I have had some successes with that strategy. For a guy with YOUR expertise? I LOVE this idea! I'm sure your amp will be better than that overpriced imported faux deco amp.
Can't wait to see it!
Thanks so much, G. I really appreciate your very nice comments :)
Anyone who can involve a plasma cutter in a guitar amp build is a legend in my book!
Actually thinking about it an old welder might make quite a cool 'steam punk' guitar amp housing...
Thanks, OB. Good idea :)
Spectacular design and craftsmanship. There may be a market for more of these.
Thanks so much, John. The only way to make them affordable would be to automate the cabinet construction. Otherwise, even at minimum wage, the cost would be prohibitive :)
I learn so much about building and electronics watching your videos. This may be my favorite so far, and I can't wait for part 2. Beautiful design!
Thanks so much, Mike :)
This one will be a stunner. Thanks for sharing with us and be careful not to step on invisible Jack!
Thanks so much, Eggy. Jack always lets me know when I'm getting too close :)
Fantastic Uncle Doug, man after my own heart ~ If you can't buy it, build it! Glad you didn't let this one "get away".
Thanks, Brian :)
Amarillo by morning ... Nice touch Uncle Doug .. Brilliant build ... )
You really got skills , electronics, cars, wood etc, a man many talents. I really enjoy your videos.
Thanks so much, Lennart :)
Wow, That chassis turned out great! What an awesome project!
Thanks, Tommy :)
Wish I was closer Doug. I was a certified TIG welder as well as a certified Toolmaker for 30 years. Would have been my pleasure to weld the chassis for you. Now I'm putting my time into electronics and amp repairs plus playing in a band every weekend. Your videos are very inspiring and informative and always entertaining. Keep them coming my friend.
Thanks, 6S. I wish you were closer also.....I'd talk you into giving me some TIG lessons. It's one fabrication method that I have not yet attempted.
I love TIG over any other welding process. It is so relaxing to do and rewarding when you get a really nice weld. It reminds me of an artist with a brush and paint. I love welding stainless steel the best, aluminum is fun too but takes a bit more practice controlling the heat constantly. As you progress your base metal gets hotter and puddle widens so you have to make adjustments with foot controller on the fly. I know you'd have no issues learning it. If you ever did any oxy/acetylene welding with filler rod you can do TIG.
I have, 6S, and would love to learn TIG welding. I'll start hunting for a good TIG unit. Any suggestions for a good one on a budget ?
This doesn't look too bad for a low priced unit. If you want a Miller or a Lincoln your looking at close to $3k for a TIG. This has high frequency start which is a must(no touching metal to start arc) and a foot controller. If you could find a good used Miller or Lincoln that would be ideal. www.amazon.com/dp/B00AFM33R0/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B00AFM33R0&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=a54d13fc-b8a1-4ce8-b285-d77489a09cf6&pf_rd_r=ZXMH4A8XC8CQ1QP3ZF7K&pd_rd_wg=PfYyU&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=vDiEz&pf_rd_i=desktop-dp-sims&pd_rd_r=74203541-9c04-11e8-8a22-f3d4eee18e06
Thanks for the link, 6S. This does appear to be a nice unit at a very reasonable price.
Excellent job Doug well done looking forward to the next vid...............................................Berni
Great design and well crafted! Looking forward to Part 2. Thanks for sharing.
You're welcome, Ted. Thanks !!!
Marvelous product you’ve made! As a NYC Ironworker, I appreciate your attention and skills.
Thanks so much, JP. I really appreciate it :)
Very cool project and your attention to detail is amazing,thanks for sharing.you are gold to the UA-cam world!
Thanks so much, Ted :)
Aluminum is an excellent touch. You are an amazing metal worker! Looks amazing and can't wait to see the end product!
Thanks so much, 69 Merc :)
Supper nice job on the chassis and the cabinet. Looking forward to the next installment.
Thanks, T :)
Uncle Doug, you are swiftly becoming my personal hero with projects like this that leap from imagination to reality the way they do with you. Coolo!!
Thanks so much, Rick. Jack and I like the pup in your icon pic :)
That's my very good boy Spartacus. He is, you guessed it, a very good boy :)
Please give him our regards, Rick :)
He replied with a hearty "Woof!"
reminds me of airstream trailer, amazing
Just great! Very cool looking and smartly made. Can't wait for part two!
Thanks so much, TP :)
I am impressed, as usual, with your attention to detail and how you got there. Very inspiring.
Thanks, Jeff :)
Uncle Doug, You are a certified badass. Ive been learning so much from your videos and I wish I could thank you in person but this will have to do I guess. So, thank you so much man!
You're welcome, PB. We appreciate the nice comments :)
That is so cool. It is all about having the right tools! I never got into metal work, wish I had. You can make anything if you have the equipment and the skills. I had a friend that made a scaled bulldozer mailbox. It was so cool. I don't have enough popcorn to last until the second video!!! I can't drink beer anymore, so I am in a mess!
Thanks, Johnny. Then we'll put you on the 'special diet'......pizza and ginger ale :)
Nice looking project. Can't wait to see the finished product.
Thanks, Phillip :)
Woo-hoo! Going uptown with a plasma cutter and a mig welder! Beats the heck outta my cutting torch and arc (SMAW) welder! Amazing work.
Thanks, Michael :)
Wow! ...and in 16 gauge! A piece of art... deco. Thanks for sharing.
I hope you're well and enjoying the summer.
You're welcome, Joe. Thanks !!! Never better.....you too, I hope :)
Indeed, I am. In fact, I took a liking to your tour of a friend's radio collection, and am making the hamfest rounds this summer. Lotta fun.
That sounds like a great hobby, Joe. Best of luck :)
Plasma cutter - WOW does that cut!
It does indeed, OO :)
Good idea to have a template to go by on this build Uncle Doug. Especially when you have to bend the shapes. That plasma cutter is definitely the way to go. That's a really nice job putting that cabinet together. Thanks for sharing Uncle Doug.
You're welcome, LL. I'm glad you liked it :)
always in awe of your creativity and execution
Thanks, Craig :)
Outstanding handiwork, Doug. This will be a classic for sure.
Thanks so much, Dc :)
Hello from Costa Rica.
You 'own' that plasma cutter, inspiring work Uncle Doug.
Greetings, Sergio. Thanks so much :)
Uncle Doug, you really Rock! wowee I can't wait for the end result....
Thanks, Pro. I think/hope you like it.
That is going to be a beautiful amplifier! You have out done yourself!
Thanks so much, K1. I am uploading Part 2 at this moment.
I really look forward to the drone flights!
I'm glad, CJ. Thanks for watching :)
Incredible design and fabrication again Doug! Looking forward to the next instalment.
Thanks, Stephen :)
I have been a big fan of Art Deco for many years, and I find your execution of the design to be much better than the original! Looking forward to the amp build, and a look at the finished product. Many thanks for your great videos, they are always of great production, and very educational, plus they are a much watch for "The Real Life Adventures of Jack the Cat".
Wow....thanks so much, Glendon. Jack and I sincerely appreciate your very nice comments :)
Wow, what a great project. Can't wait for the next part....
Thanks, Torgo :)
Thank you again for sharing. I always look forward to your videos.
You're welcome, Marshall :)
You've really outdone yourself here! Wow.
Thanks, Roger :)
This looks awesome so far. Styling like an old Buick, but I mean that in a good way! Can't wait for the next installment.
Thanks, Dave :)
Wow, just stunning. What a brilliant craftsman you are. Thanks for the superb builds as usual.
Thanks so much, Chris :)
Glad your back. Ah, Rusty and Jack also.
Thanks, Mike. At my age, it's good to be anywhere above ground :)
I can't wait until it's finished!
Neither can we, B55 :)
Absolutely drop dead gorgeous. Hats off to you sir.
Thanks so much, GZ :)
Doug, great project with your usual attention to details. Can't wait to see and hear this cool amp.
Thanks, Larry :)
Uncle Doug I am in a new subscriber. I'm so glad that I found your Channel. I have been studying old radiotron books and searching for information on tube amplifiers for several years now and I have been experimenting with tube amplifier circuits. But you have really show me a lot of things that I did not understand and I truly appreciate it and you truly are a wonderful teacher.
Thanks so much, David. Welcome to our channel. We hope you find it both entertaining and informative :)
Most informative
Nice sheetmetal fabrication. You are multi-talented.
Thanks, Bobby :)
Next is the 2lb coffee can mini-amp. p.s. outstanding work. This is how craftsmanship crosses over to art. And I thought southern AZ was dusty and many shades of brown.
Thanks so much, Clarence. We are in far Western Texas, a bit east of Arizona, but the landscape is much the same.
Already looks cooler than the original !
Thanks, Bryan :)
I love what you are doing uncle Doug keep up the magic.
Thanks, Scott. We will :)
The build is amazing, and your skills are too. It is already very beautiful half finished as in this video. But, to me, it is a lot of work, and a case of be careful for what you ask for or want. The problem is you saw the original unique piece, liked it, and since there are none others to buy, you made it. An alternative would be to just keep looking and maybe come up with a whole other project or find another similar amp or similar art deco case to whatever, and then insert an amp into a case that was already made in a factory that already had all the tooling set up, etc. Just from a resource perspective. But for an educational video, this video is 5 stars. Now on to part 2.
Thanks, Jeff. The problem is......I'm not a patient guy. When I see something I really like and can't buy, borrow, or steal it......I'll try to make it myself. In this case it was indeed a lot more work than I expected.
Well Doug you always makes us impressed! So Great!!
Thanks, Peder :)
Great metal work Doug... I know your really enjoying this build.
Thanks, Dom. It's a much tougher project than I expected, but I'm real happy with the results......and the nice comments from viewers.
Oh a plasma cutter. We have an ESAB at work, I love it! Very nice work on the cabinet. I must say the perforated steel looks so much better than expanded metal, good choice! Also the craftsmanship is top notch! Starting from scratch like this and to have everything line up perfect is quite a feat indeed! You sir are truly a craftsman! Thanks for sharing this with us. Looking forward to part two. That Jack is quite the cat! Such a master of disguise, lol.
Thanks so much, Jack. Jack and I really appreciate all your very nice comments :)
You Sir are a genuine artist in whatever medium you choose to work with. You are also a man after my own heart, using whatever materials that you are able to lay your hands on. I am currently building a bookshelf for my wife from the salvaged baseboard and trim lumber from our former home that was first cut about 1920. I think that you should name your amp the ”Thunder-Vibe” due to the embellishment you have designed for the front panel. Try not to injure yourself moving that 16 gauge beast around once you get the transformers into it. The drone flight, all I can say is. ”My how the area has grown in the last 40 years”, beautiful video and rendition of ”Amarillo by Morning”. This is an exciting and really fun looking project. I love the ”I could build something like that, even better than the original for less money” attitude. I can't wait for part 2. Well got to go out to the shop and get back to sanding boards that were coated with shellac in 1925, fun, fun, fun.
Thanks so much for your very nice comments and advice, Mark. You recall the exact location of the video......right at the southernmost tip of the Rockies, overlooking downtown EP as well as Old Mexico and New Mexico. Good luck with your project.
Impressive project as always sir.
Thanks, DK :)
What a gorgeous cabinet. Very nice craftsmanship.
Thanks, Michael :)
YEAH,UNCLE DOUG! great work!pure art-rockn rolly!
Thanks, Francis :)
Very cool cabinet. Looking forward to the rest of the build.
Thanks, GM :)
Idea for the fan. We use lower DC voltages (5 to 7-ish) to run 12-volt computer fans. This helps to reduce the fan noise by running them slower then spec'd. You could tap off and rectify your 6-volt transformer output to save a few parts (addition transformer). Fun build.
Thanks for the suggestion, Cherry. I'll test it this afternoon.
Hi Doug, if you don't need the fan running at full speed, you can save the extra 12V transformer and simply run the 6.3V filament voltage through a bridge rectifier with a decoupling cap. The resulting 8-9V DC should be enough to spin the fan.
That's an excellent idea, W. I'll try it and see if it works :)
It will be quieter too at the lower voltage
That's a top-notch suggestion! I always use PC-fans for the DIY-stuff that i build for my electronic bench (power supplys, DC loads etc.). Usually I even throw in a linear regulator to adjust the fan speed by trimmer or pot on the rear. 8-9V will sure be enough for the fans to spin up.
Another thing - those fans are available in 120 volt AC models. www.allelectronics.com/category/220/fans/1.html
I have done this 6.3 rectified to dc for fan --- it works -- thanks for the vids and hi from Dublin !
OMG that is beautiful!!! We love deco style👍 You did well, good fabrication skills👍👍😉
Thanks so much, Jennifer. I always value your opinion.
Amazing! love how you refuse to be beaten by sellers that want an arm and a leg for things.
besides, your amp is going to be even better than anything on offer. looks supercool!
cannot wait to see / hear the result. cheers!
Thanks so much, Frans. I hope you watch the whole video series. I think this was one of my better creations :)
@@UncleDoug Oh i sure did watch all of it!
needless to say this thing turned out gorgeous! and sounds great too!
but you had help of your cat, changes everything.. cheers!
Very cool project Uncle Doug! I always liked the art deco look, but unfortunately i do not have the skills nor the tools to make this myself. But it is truly a joy to see you creating this cabinet from just a sheet of metal and some other parts. Can hardly wait until part 2 is there. Thanks!
You're welcome, Sebastiaan. Thanks so much for your very nice comments.
Nice to see you back.
It's nice to be back, David :)
When do you sleep? You are a true artist Doug. Looking forward to the next one, as always.
Thanks, Alfa. I must admit that this project kept me in the workshop quite a bit, but I got so tired that I did sleep quite well after work was done :)
Great stuff Doug! Can't wait to see the finished project. Nice ending with the fly over and music. Well done sir and greetings from Maine.
Thanks so much, PC. Likewise from the hinterlands of far West Texas :)
I like the attitude Uncle Doug. Too expensive? Build it yourself! That's probably how the West was won...
Heck, yes, Joachim. Thanks !!
Looking good for now. And your playing is indeed improving as Brad said before. Thanks :-)
You're welcome, Daniel. Thanks !!!
What a superb build,fantastic craftmanship!
Thanks so much, Colin :)
Uncle Doug, you are an artist!!! :)
Thanks, Jason :)
Doug, you've outdone yourself on this. What an amazing amp cabinet.... you are truly a craftsman on this stuff - you've made it look easy but I know it is not. Very very very nice work. Ron
Thanks so much, Ron. I really appreciate it :)
I have learned so much from your videos. Thank you
You're welcome, David.
Fantastic as always Doug! Better than the original, more understated, more Hot Rod!
High praise indeed, Joby. Thanks !!!
Most excellent panel beating there! that will be such a gem of an amp!
Thanks so much, CB. I ordered the amp circuit parts last night.
Fun project! Looking fwd to part 2.
Thanks, Gerald :)
So nice on so many levels. I look forward to part 2 and p.s. what you do is fantastic.
Wow, thanks, Sid :)
Yes, that is a nice cabinet build. You did a good job with the cuts. Nice
Thanks, Hack :)
Uncle Doug you are an artist in your skills myself I have an artsy side but usually leave my masterpieces framed in porcelain and glossed in toilet water . However I did stay in a Holiday Inn last night ........
I think that was how the Mona Lisa was created, EJ ;) And all it takes to get a clean, new canvas is push down on the flush handle :)
Great video! Really calms me down after a busy day and meanwhile I learn about amps;)
Thanks, Floris. We're glad to help calm your frazzled nerves :)
I love watching your videos.
And I sincerely appreciate the time you spend watching them. Thanks !!
Hi Doug Greetings from down under, I watched this video with an increasing sense of Deja Vu all of a sudden I was in the Apprentice Training School back in 1970 fabricating my first job which was a hand made Tool Box with lots of bends and welds(with OXY) ours was a bit easier we used cold rolled Sheet Metal not as strong but easier to work with than the less malleable hot rolled(due to its crystalline structure) I don't think I could do it now! its a great job as always Doug we appreciate your time and the hard work and planning you put in to all your projects
Thanks so much, Steve. Coming from someone with experience in the challenges of steel fabrication, especially with stiff, crystalline hot-rolled steel, your compliments are particularly appreciated.
Lovely work, and again, inspiring. Thank you.
You're welcome, Cass.
Drone flight was interesting, I've never seen the land out that way. Awesome friggin amp though, that's one of my favorite ways to grab a beer.
Thanks, Wizzle.
I really appreciate the time you spend producing these videos; the radio shell looks awsome and i would love to build one myself but I dont have access to all the required tools. Maybe I will build a simpler version, as finances allow. There are so many people around with poor manners these days, I suspect the person selling the radio which inspired this video just speculates in old equipment and had no interest in the radios preservation or maitenance and thats why they didnt reply to you. I was looking for a valve tester and found one on Ebay at $1500, really overpriced. I made what I considered a reasonable offer; I did receive a reply, a hurl of abuse and foul language. I replied "just a simple yes or no would have sufficed". Roll us back to the late 50s to mid 60s when America, Uk, France etc. were great respectful Nations. God bless the polite citizens of the world. Thank you for a really exceptional video from which I learned so much. Thank you.
Awsome
You're welcome, IG. Thanks for your very nice comments and support of my project. I agree with your assessment of the deterioration of manners and respect in our society. I'm proud that virtually all of our viewers seem to be "old fashioned" polite individuals like yourself :)
So very different to your other amp cabinets but every bit as good, really "snazzy". I remember your Tremoverb build and I bet the neighbours do too, so they should be pleased with the Plasma cutter. Your aluminium wrap around bars, front panel dress trim and the round control dials suit the Art Deco style perfectly. Your imagination is in good shape. And we are going to get Tremolo, which I think is a must have. I/P jacks on the left hand side of the cabinet would permit them to be right near the pre-amp tube, just a thought. Colour? Cream, your hot rod truck blue, red or even black would look great. Thanks for the drone trips, they are providing a very nice panorama of your countryside for those of us who have never been there and a pretty tune as well. Thanks once again.
Thanks for all your very nice comments, Jeff. Yes, the neighbors prefer the plasma cutter by a margin of 10 to 1, with the one holdout being a semi-deaf old man who loves the sound of hammering and cussing. He says it reminds him of his first marriage :)
You're very artistic Uncle Doug!
Thanks, John :)
Wow!!! That is looking super cool!
Thanks, MW :)
Fine craftsmanship Sir Uncle Doug ....
Thanks, Scott :)
Beautiful metalwork Uncle Doug! I can't wait for part 2! You are a true craftsman!
Thanks, Harold :)