i would just take the top half off, it makes it easier to install and on top of that you can put a fresh set of plugs in, do a oil change much easier and put in a fresh battery. get a strap type oil filter removal tool and it makes it much easier to remove the ring, no need to tap on it to remove.
Don’t need a fresh set of plugs or oil change all the time. Some people mod after they have already done. Take the top all the way off if you like. That’s not wrong it’s just another way.
Eluder Racing yes we do. The free flow exhaust system goes out of the oem exhaust exit. We have sound clips of that one also. wetjetperformance.com/shop/ols/products/wet-jet-performance-spark-free-flow-exhaust
Just got two new sparks. Any chance of the ski getting an enema and damaging something sliding backwards? I have an older 2 stroke and I noticed exhaust flaps on those.....just wondering
Truckguy Truckguy no chance unless you leave it upside down for 5-10 minutes. The water box holds any water back from getting into your engine. Over 1500 exhaust sold and zero motor lock ups do to an exhaust.
Aldez yes defeats the purpose. The oem hole is in the pump tunnel and vibrates the hull. Exhaust going out the rear looks better and it’s louder. Plus you get zero hull vibration shooting the exhaust behind you versus underneath you. Rear exit exhaust is the way to go
tyson Baar we cut them open and remove the baffle and add a waffle grate to give it a distinct sound. Saving you money on buying an aftermarket waterbox. Wetjetperformance.com
Recently got a spark and got a few questions about a project I’m tryna do, you got Ig or something so I can dm you send a few pics and see if you could be able to give me a few tips?
Cody Hill when are you getting an exhaust code. If you are getting a temp code you sensor might be bad on the waterbox. The rear exhaust makes more flow but you shouldn’t be getting a temp code. If you are just putting around in a circle for awhile it will go off from time to time
Bishop’s Reviews, diy, and fun vids long story short. 2 trees fell onto my spark in 2017. I finally refurbished two hulls into one and it worked! Had it on the water going full speed for some time and then the code came out. White smoke Was coming out from the back and just running limp. It hasn’t ran since 2017 and only has 13 hours on it.
Ashton Mchenry the purpose of the water box is to protect your motor. A delete puts your motor at major risk of a hydro lock. Especially if you flip it. A straight pipe is loud as hell and you damn near need ear plugs to ride it. We wouldn’t promote a product that would put your motor at risk.
We have the free flow system. You can run a rear exit exhaust with the deck on the back. You have to take that off and make it a 2 up to run a rear exit . Here is the free flow exhaust link. wetjetperformance.com/shop?olsPage=products%2Fwet-jet-performance-spark-free-flow-exhaust
Anderson E Rockefeller who said the exhaust system is 400 bucks ? It’s 229.99 and that’s the lowest price on the market . Go get yourself a 100k Cnc machine to make aluminum parts and you will understand how the cost of products is factored. Nobody makes a $400 rear exit exhaust
i would just take the top half off, it makes it easier to install and on top of that you can put a fresh set of plugs in, do a oil change much easier and put in a fresh battery. get a strap type oil filter removal tool and it makes it much easier to remove the ring, no need to tap on it to remove.
Don’t need a fresh set of plugs or oil change all the time. Some people mod after they have already done. Take the top all the way off if you like. That’s not wrong it’s just another way.
Sheeeesh just picked up a 2 3/4 hole saw going to be cutting a whole in my 2021 trixx with only one ride on it. Gotta do it for Bishop @WJ 😄
TurnerDH777 awesome will be worth it . Easy fit and sounds great
Cowboy Bishop vids Uploaded a video go check it out...the install went super easy thanks to your video!
Notice all the green on the chop scissors hahaha
Merci beaucoup ❤❤❤❤❤❤❤
Buon lavoro p, peccato quella porcheria col silicone all'interno, inutile
Wetjetperformance.com
I am your newest fan......whats the best way to have you work on my new Seadoo when I get it??
Does putting an exhaust effects the jet ski or has any effects on the engine?
Zero problems for your engine
Bro thank ya so much man this video actually helped me out alot
Great video.
great video!! I was wondering do you offer a kit that retains the original exhaust exit? if I didn't want to drill the other whole?
Eluder Racing yes we do. The free flow exhaust system goes out of the oem exhaust exit. We have sound clips of that one also. wetjetperformance.com/shop/ols/products/wet-jet-performance-spark-free-flow-exhaust
What is the difference between the free flow vs the rear exit other than the exhaust tone?
I need one for a RXT X 300 🎉
We have them in stock
Hi wat silicone you usé?
Just got two new sparks. Any chance of the ski getting an enema and damaging something sliding backwards? I have an older 2 stroke and I noticed exhaust flaps on those.....just wondering
Truckguy Truckguy no chance unless you leave it upside down for 5-10 minutes. The water box holds any water back from getting into your engine. Over 1500 exhaust sold and zero motor lock ups do to an exhaust.
Would it defeated the purpose if you used the same hole the outlet that you capped off
Aldez yes defeats the purpose. The oem hole is in the pump tunnel and vibrates the hull. Exhaust going out the rear looks better and it’s louder. Plus you get zero hull vibration shooting the exhaust behind you versus underneath you. Rear exit exhaust is the way to go
Does it help on performance wise?
what about the water box is modified?
tyson Baar we cut them open and remove the baffle and add a waffle grate to give it a distinct sound. Saving you money on buying an aftermarket waterbox.
Wetjetperformance.com
the water box is aluminum?? or steel??
gerardo buenfil oem is aluminum
@@cowboybishopvids6570 thanks
Can u use this exhaust for the 2018 trix 3up model ?
No , only for the 2 up Model
Recently got a spark and got a few questions about a project I’m tryna do, you got Ig or something so I can dm you send a few pics and see if you could be able to give me a few tips?
Emmanuel Williams congrats on your spark and we will be glad to help you out. Just message us on Facebook @ wet jet performance.
Bishop’s Reviews, diy, and fun vids I messaged you🤙🏿
it's OK? i'm from brazil, i would like to take a doubt, what did you do inside the waterbox ??
Adail Junior purchase one 😉
@@cowboybishopvids6570 ahahahahaha, I have a spark year 2019, and I want to make the exhaust noisy, but I don't know what they do in the waterbox ...
Just get your welder to look at the inside and alter it. We don’t advise or tell people what to do.
can i order just the plug for the jet pump tunnel exit from wet jet?
Yes 60 bucks just call us or message on fb
I think I need to get me some real good beats and then everything will seal up good? lol nice
Jeremy Nelson hahaha might be onto something lol
Why do people do this? The make one that hooks up where the old one was and saves the time, effort, and overall worry of leaking in the future.
Will this fix my high exhaust temp code it keeps throwing out?
Cody Hill when are you getting an exhaust code. If you are getting a temp code you sensor might be bad on the waterbox. The rear exhaust makes more flow but you shouldn’t be getting a temp code. If you are just putting around in a circle for awhile it will go off from time to time
Bishop’s Reviews, diy, and fun vids long story short. 2 trees fell onto my spark in 2017. I finally refurbished two hulls into one and it worked! Had it on the water going full speed for some time and then the code came out. White smoke Was coming out from the back and just running limp. It hasn’t ran since 2017 and only has 13 hours on it.
I currently have it being flushed and running it. The alarm came on went limp and then went off. Now sitting in idle it doesn’t come in.
Cody Hill you probably have a bad temp sensor and make sure you don’t have something clogged in the jet pump
Why did you put the water box back on it you could have made it sound a lot better by doing delete water box
Ashton Mchenry the purpose of the water box is to protect your motor. A delete puts your motor at major risk of a hydro lock. Especially if you flip it. A straight pipe is loud as hell and you damn near need ear plugs to ride it. We wouldn’t promote a product that would put your motor at risk.
Bishop’s Reviews, diy, and fun vids thanks bro
Which exhaust is this?
Standard rear exit
Do you have a rear exhaust for 2019 spark 3up?
We have the free flow system. You can run a rear exit exhaust with the deck on the back. You have to take that off and make it a 2 up to run a rear exit . Here is the free flow exhaust link. wetjetperformance.com/shop?olsPage=products%2Fwet-jet-performance-spark-free-flow-exhaust
Hmm...400 bucks is alot of money for claps, rubber hose, aluminum pipe and aluminum back piece.
Anderson E Rockefeller who said the exhaust system is 400 bucks ? It’s 229.99 and that’s the lowest price on the market . Go get yourself a 100k Cnc machine to make aluminum parts and you will understand how the cost of products is factored. Nobody makes a $400 rear exit exhaust
Mine came with no nuts 😢
You don’t need nuts if you have a lock ring
9:50, thats 1 hellava buttplug. Aint no way thats popping out no matter how good you squeel like a pig.....