Really superb model again Mr. Lin, the paintjob is stunning, the interior and engine look great and the modifications you made to the wheel track and axle spacing made a huge difference! I really like this one!
Another beautiful build. I am surprised that Revell made such mistakes with the wheelbase and track of the model, but it looks so much better with your modifications. Best wishes.
thank you...🙂 I'm not sure the issue came from the kit or just because I did something wrong during assembling..a simple modification made it looks better..after all,this revell kit is a very good kit to build . cheers!!
Hi Mr, congrats on another finished project. As usual I come with question - I've painted car body with acrylic Tamiya paint. Then I masked the body with Tamiya masking tape and painted certain areas with black tamiya acrylic paint (window trims etc). No clear coat yet, only acrylic paints. After I removed the masking tape there are visible areas of glue from tape. What should I use to remove glue residues without damaging acrylic paint surface?
@@loganit0 hi, maybe the under paint is not fully cured...the coat film of acrylic paint is pretty weak,so be careful with it,do not cover lacquer base paint over it... about the glue leave by masking tape,try use Tamiya x-20 thinner...
@@MRLINSSCALEMODELING Thanks for reply! 1/ I shouldnt put lacquer clear coat over acrylic base? I know its hot, but I used it on seats and the acrylic surface didnt melt. 2/ as for glue residues, AI suggests using very small IPA or just warm water with soap. Im not sure about X-20 as it is dedicated to thin acrylics which is what used to paint my body.
@@loganit0 don't use IPA,that will remove acrylic paint!! if you want to apply lacquer clear over acrylic paint,make sure apply light coat first,too much lacquer paint will damage the acrylic paint underneath
@@MRLINSSCALEMODELING Ok no IPA, understood. You are absolutely right, there is x-20 and x-20a! You are the man, Mr. Lin. Tomorrow I will give it a try. Thanks for all the knowledge!
I have seen this kit built on another youtube channel, and the builder had fit issues getting the front grille, hood and fenders in alignment. Did you have any problems with that which were not made a part of this video?
Really superb model again Mr. Lin, the paintjob is stunning, the interior and engine look great and the modifications you made to the wheel track and axle spacing made a huge difference! I really like this one!
This build is superb. Thanks for sharing it with us.😊
@@bobyoung1698 thank you 🙂
As always, another excellent video of another excellent build by you! Thank you for posting your video(s) too!!
thank you 😊
I am glad you like it 😊
Great job, nice looking model. Thanks for sharing.
thank you very much!!🙂
Very nice work, far above anything that I could do.
thank you very much 😊
You made that kit look real!
thank you 😊
Great build. Nice attention to detail. Might have to pick one up for the stash.
thank you!!
this kit is very good and joyful to build,ave a good time with that!! ☺️
Oh man, I really hope you’ll build more of these american classics in the future. Very nice video build. Thank you for sharing this❤👏🏻👏🏻👏🏻
thank you my friend 😊
I Will definitely build some classic car in the future!
Beautiful work
thank you very much!!🙂
Another beautiful build. I am surprised that Revell made such mistakes with the wheelbase and track of the model, but it looks so much better with your modifications. Best wishes.
thank you...🙂
I'm not sure the issue came from the kit or just because I did something wrong during assembling..a simple modification made it looks better..after all,this revell kit is a very good kit to build .
cheers!!
Wow! It's so black it looks chrome! After the initial painting.
thank you very much!!🙂
very good this ford 48 gangster
thank you very much!!🙂
Exceptional result, especially the shine!!
thank you 😊
Very nice work, a true work of art.
Thank you for all your secret techniques.
thank you very much!!🙂
That’s a beauty 🤩
thank you very much!!🙂
很棒的作品 🎉 我也想買台利華的龐帝克火鳥來做（雖然雙11買了一台r32 一台r34 沒做完😅）老林如果喜歡也可考慮一下 龐帝克火鳥是我最喜歡的美國肌肉車😊（我是高中學生沒那麼多時間玩模型😢）
感謝!! REVELL 的龐帝克火鳥 我也有..將來有機會我也會製作..
課業為重..有時間做做模型會很開心喔!!😄
Hi Mr, congrats on another finished project. As usual I come with question - I've painted car body with acrylic Tamiya paint. Then I masked the body with Tamiya masking tape and painted certain areas with black tamiya acrylic paint (window trims etc). No clear coat yet, only acrylic paints. After I removed the masking tape there are visible areas of glue from tape. What should I use to remove glue residues without damaging acrylic paint surface?
@@loganit0 hi, maybe the under paint is not fully cured...the coat film of acrylic paint is pretty weak,so be careful with it,do not cover lacquer base paint over it...
about the glue leave by masking tape,try use Tamiya x-20 thinner...
@@MRLINSSCALEMODELING Thanks for reply!
1/ I shouldnt put lacquer clear coat over acrylic base? I know its hot, but I used it on seats and the acrylic surface didnt melt.
2/ as for glue residues, AI suggests using very small IPA or just warm water with soap. Im not sure about X-20 as it is dedicated to thin acrylics which is what used to paint my body.
@@loganit0 don't use IPA,that will remove acrylic paint!!
if you want to apply lacquer clear over acrylic paint,make sure apply light coat first,too much lacquer paint will damage the acrylic paint underneath
by the way,is "x-20"enamel thinner,not "x-20a"...
@@MRLINSSCALEMODELING Ok no IPA, understood. You are absolutely right, there is x-20 and x-20a! You are the man, Mr. Lin. Tomorrow I will give it a try. Thanks for all the knowledge!
👏👏👏👍👍👍💪💪💪 🥰
thank you very much!!🙂
I have seen this kit built on another youtube channel, and the builder had fit issues getting the front grille, hood and fenders in alignment.
Did you have any problems with that which were not made a part of this video?