Thank you, your video is the only one that showed how to get the print head to the middle to access it. HP tech support told me my printer was broken. I spun the little white gear on the the main roller forward, it unlocked the printhead and I slid it to the midde. Thanks again.👍
For anyone unsure of what to roll. Look for the white gear on the right. It has ridges on it. Rotate it towards you till you cant rotate it anymore and then you can move the printhead to the center easily
Actually, I had to remove Printheads to clean them as I had colour problems... the red was printed as green. I was not sure how to remove them. Thanks to you I solved my problem... so grateful... one missing thing is what you do with your hand before you draw the printheads to the center to remove them. I solve it by the following help @MilkANDMagic 4 months ago For anyone unsure of what to roll. Look for the white gear on the right. It has ridges on it. Rotate it towards you till you can't rotate it anymore and then you can move the printhead to the center easily. I copy it here for anyone who doesn't understand what to do like me as the printheads are really stuck and don't move if you don't roll the white wheel/gear... Thank you both!!!
The thing he told to roll out is found at the bottom-right most part area of the printer (there are 8 small rollers with gaps in between... after the 8th at the right most part you will be able to see a white gear that rolls back and forth)... you have to roll it towards you until it stops rolling. Then a black head button will appear just beside it, then you'll have to press down to release the lock so you can move the print head to the center (and do your thing)... It got me couple of minutes to find it. I hope this helps!
Rotate the rightmost white tooth, approximately 7 mm thick and 2 cm in diameter, towards you by 5.6 teeth. In the rear right you will see a piece that moves backwards. After reaching the end the cartridge heads will be released. You can then pull the freed heads towards the center with your hand.
I have this printer, and it takes me 15 minutes to print when I print at the highest quality. (only in the high quality I am satisfied with the color results and the black and white without white stripes), I wanted to know if you encountered this problem, and if there is a solution to this?! Thank you!
Ждал это видео несколько лет, пока заменная головка лежала в тумбочке, т.к. поддержка у hp и их инфо ресурсы просто отвратительные. "Если головка не выехала в центр, значит, не надо её менять".
Thank you, your video is the only one that showed how to get the print head to the middle to access it. HP tech support told me my printer was broken. I spun the little white gear on the the main roller forward, it unlocked the printhead and I slid it to the midde. Thanks again.👍
You're Welcome tonylozano
It's our pleasure to help
We are grateful for your support
Sir, pano po yong pag rotate? Nalilito po talaga ako ano yang ni rotate mo. Thank you, po
Sir, pano po yong pag rotate? Nalilito po talaga ako ano yang ni rotate mo. Thank you, po
Thank you much, such a big help!
Welcome
For anyone unsure of what to roll. Look for the white gear on the right. It has ridges on it. Rotate it towards you till you cant rotate it anymore and then you can move the printhead to the center easily
Спасибо!
Thank you so important for me
Thanks this helped a ton!
You're Welcome
It's our pleasure to help
We are grateful for your support
Such a helpful video. This company was even telling me i had to bring it in to have it reapaired when all i really needed to do was this
You're Welcome
It's our pleasure to help
We are grateful for your support
Я просто снял старую, почистил салфеткой и все заработало стало печатать очень четко!!! Несколько раз пропечатать только нужно.
Actually, I had to remove Printheads to clean them as I had colour problems... the red was printed as green. I was not sure how to remove them.
Thanks to you I solved my problem... so grateful... one missing thing is what you do with your hand before you draw the printheads to the center to remove them.
I solve it by the following help
@MilkANDMagic
4 months ago
For anyone unsure of what to roll. Look for the white gear on the right. It has ridges on it. Rotate it towards you till you can't rotate it anymore and then you can move the printhead to the center easily.
I copy it here for anyone who doesn't understand what to do like me as the printheads are really stuck and don't move if you don't roll the white wheel/gear...
Thank you both!!!
i cant move it still
The thing he told to roll out is found at the bottom-right most part area of the printer (there are 8 small rollers with gaps in between... after the 8th at the right most part you will be able to see a white gear that rolls back and forth)... you have to roll it towards you until it stops rolling. Then a black head button will appear just beside it, then you'll have to press down to release the lock so you can move the print head to the center (and do your thing)... It got me couple of minutes to find it. I hope this helps!
Rotate the rightmost white tooth, approximately 7 mm thick and 2 cm in diameter, towards you by 5.6 teeth. In the rear right you will see a piece that moves backwards. After reaching the end the cartridge heads will be released. You can then pull the freed heads towards the center with your hand.
Yes
Where did you bought the cartridge for hp smart tank 615?
HP Stores or HP Service Partners
@@Tech-aidSupport29 is it online or in-store huhu been trying to buy for almost 2 months now. Still can't buy.
Спасибо огромное. Получилось.
You're Welcome
It's our pleasure to help.
We are grateful for your support.
sir yung roller p ba na yun yung bakal na nasa gitna? saka paano po iikot yun ang dulas super parang may lotion
Yung gear sa dulo ang iikutin mo
I replaced both cartridge but still didnt work😢
Try to clean your carriage terminals or replace new carriage pca
I have this printer, and it takes me 15 minutes to print when I print at the highest quality. (only in the high quality I am satisfied with the color results and the black and white without white stripes), I wanted to know if you encountered this problem, and if there is a solution to this?! Thank you!
Try to update the firmware
How did you forward the main roller? and which one is the main roller?
Kindly rotate the pf encoder roller
@@Tech-aidSupport29 where is the pf encoder roller? Can you show us? Been trying to rotate everything inside but I can't seem to move the cartridge.
its the white gear on the rightmost part of roller array@@VernaLoooooka
Gud pm po bakit po kaya ayaw pumunta sa center Ang print head ko di ko tuloy matanggal cartridge thank you po
E munual move nyo nalang po
not clear what roller
Sir hindi ba kaya ng gnyan printer un double sided photo paper ?
Pwede naman po sir wag lang masyadong makapal yung photo paper
Hi, the blue thing is so hard to push po? Whats the problem kaya?
Just push the blue latch downward and pull it upward
Why everyone is saying that he shows how to get them to the middle...
Bkt nakailang rotate n ko ng main roller ayaw mahila ng printhead sa center po?
Rotate mo lang yung roller hanggang sa pwede ng ma move yung carriage holder
How about if yellow color po ang wala sa print out?
Try nyo munang e cleaning
Ждал это видео несколько лет, пока заменная головка лежала в тумбочке, т.к. поддержка у hp и их инфо ресурсы просто отвратительные. "Если головка не выехала в центр, значит, не надо её менять".
ayaw pa rin pong mag-unlock nung printheads kahit sagad na po yung pagkakaikot ng roller, pano po kaya yun?
Turn On nyo po yung unit then open nyo po Yung front door at kapag na move na po yung printhead bunutin nyo sa saksakan
How to move the cartbridge po papunta sa center?
Just rotate the roller first before moving the printhead
Hey,
After I turned on the printer, an error appears: cartridge carriage is stuck
The head only goes to the right and gets stuck, what do we do?
Hi sir yun cartridge ko po ayaw gumitna 🙁🙁
Rotate nyo lang po yung roller